-
Neural network assisted electrostatic global gyrokinetic toroidal code using cylindrical coordinates
Authors:
Jaya Kumar Alageshan,
Joydeep Das,
Tajinder Singh,
Sarveshwar Sharma,
Animesh Kuley
Abstract:
Gyrokinetic simulation codes are used to understand the microturbulence in the linear and nonlinear regimes of the tokamak and stellarator core. The codes that use flux coordinates to reduce computational complexities introduced by the anisotropy due to the presence of confinement magnetic fields encounter a mathematical singularity of the metric on the magnetic separatrix surface. To overcome thi…
▽ More
Gyrokinetic simulation codes are used to understand the microturbulence in the linear and nonlinear regimes of the tokamak and stellarator core. The codes that use flux coordinates to reduce computational complexities introduced by the anisotropy due to the presence of confinement magnetic fields encounter a mathematical singularity of the metric on the magnetic separatrix surface. To overcome this constraint, we develop a neural network-assisted Global Gyrokinetic Code using Cylindrical Coordinates (G2C3) to study the electrostatic microturbulence in realistic tokamak geometries. In particular, G2C3 uses a cylindrical coordinate system for particle dynamics, which allows particle motion in arbitrarily shaped flux surfaces, including the magnetic separatrix of the tokamak. We use an efficient particle locating hybrid scheme, which uses a neural network and iterative local search algorithm, for the charge deposition and field interpolation. G2C3 uses the field lines estimated by numerical integration to train the neural network in universal function approximator mode to speed up the subroutines related to gathering and scattering operations of gyrokinetic simulation. Finally, as verification of the capability of the new code, we present results from self-consistent simulations of linear ion temperature gradient modes in the core region of the DIII-D tokamak.
△ Less
Submitted 23 August, 2024;
originally announced August 2024.
-
Evaporation-driven coalescence of two droplets undergoing freezing
Authors:
Sivanandan Kavuri,
George Karapetsas,
Chander Shekhar Sharma,
Kirti Chandra Sahu
Abstract:
We examine the evaporation-induced coalescence of two droplets undergoing freezing by conducting numerical simulations employing the lubrication approximation. When two sessile drops undergo freezing in close vicinity over a substrate, they interact with each other through the gaseous phase and the simultaneous presence of evaporation/condensation. In an unsaturated environment, the evaporation fl…
▽ More
We examine the evaporation-induced coalescence of two droplets undergoing freezing by conducting numerical simulations employing the lubrication approximation. When two sessile drops undergo freezing in close vicinity over a substrate, they interact with each other through the gaseous phase and the simultaneous presence of evaporation/condensation. In an unsaturated environment, the evaporation flux over the two volatile sessile drops is asymmetric, with lower evaporation in the region between the two drops. This asymmetry in the evaporation flux generates an asymmetric curvature in each drop, which results in a capillary flow that drives the drops closer to each other, eventually leading to their coalescence. This capillary flow, driven by evaporation, competes with the upward movement of the freezing front, depending on the relative humidity in the surrounding environment. We found that higher relative humidity reduces the evaporative flux, delaying capillary flow and impeding coalescence by restricting contact line motion. For a constant relative humidity, the substrate temperature governs the coalescence phenomenon, and resulting condensation can accelerate this process. Interestingly, lower substrate temperatures are observed to facilitate faster propagation of the freezing front, which, in turn, restricts coalescence.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
Observation of Kolmogorov turbulence due to multiscale vortices in dusty plasma experiments
Authors:
Sachin Sharma,
Rauoof Wani,
Prabhakar Srivastav,
Meenakshee Sharma,
Sayak Bose,
Yogesh Saxena,
Sanat Tiwari
Abstract:
We report the experimental observation of fully developed Kolmogorov turbulence originating from self-excited vortex flows in a three-dimensional (3D) dust cloud. The characteristic -5/3 scaling of three-dimensional Kolmogorov turbulence is universally observed in both the spatial and temporal power spectra. Additionally, the 2/3 scaling in the second-order structure function further confirms the…
▽ More
We report the experimental observation of fully developed Kolmogorov turbulence originating from self-excited vortex flows in a three-dimensional (3D) dust cloud. The characteristic -5/3 scaling of three-dimensional Kolmogorov turbulence is universally observed in both the spatial and temporal power spectra. Additionally, the 2/3 scaling in the second-order structure function further confirms the presence of Kolmogorov turbulence. We also identified a slight deviation in the tails of the probability distribution functions for velocity gradients. The dust cloud formed in the diffused region away from the electrode and above the glass device surface in the glow discharge experiments. The dust rotation was observed in multiple experimental campaigns under different discharge conditions at different spatial locations and background plasma environments.
△ Less
Submitted 10 August, 2024;
originally announced August 2024.
-
Investigation of Novel Preclinical Total Body PET Designed With J-PET Technology:A Simulation Study
Authors:
M. Dadgar,
S. Parzych,
F. Tayefi Ardebili,
J. Baran,
N. Chug,
C. Curceanu,
E. Czerwinski,
K. Dulski,
K. Eliyan,
A. Gajos,
B. C. Hiesmayr,
K. Kacprzak,
L. Kaplon,
K. Klimaszewski,
P. Konieczka,
G. Korcyl,
T. Kozik,
W. Krzemien,
D. Kumar,
S. Niedzwiecki,
D. Panek,
E. Perez del Rio,
L. Raczynski,
S. Sharma,
Shivani
, et al. (7 additional authors not shown)
Abstract:
The growing interest in human-grade total body positron emission tomography (PET) systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animal-based research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost-effective…
▽ More
The growing interest in human-grade total body positron emission tomography (PET) systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animal-based research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost-effective small animal total body PET scanners (for mouse and rat studies) have been investigated in order to inspect their feasibility for preclinical research. They were designed with the novel technology explored by the Jagiellonian-PET (J-PET) Collaboration. Two main PET characteristics: sensitivity and spatial resolution were mainly inspected to evaluate their performance. Moreover, the impact of the scintillator dimension and time-of-flight on the latter parameter was examined in order to design the most efficient tomographs. The presented results show that for mouse TB J-PET the achievable system sensitivity is equal to 2.35% and volumetric spatial resolution to 9.46 +- 0.54 mm3, while for rat TB J-PET they are equal to 2.6% and 14.11 +- 0.80 mm3, respectively. Furthermore, it was shown that the designed tomographs are almost parallax-free systems, hence, they resolve the problem of the acceptance criterion tradeoff between enhancing spatial resolution and reducing sensitivity.
△ Less
Submitted 6 August, 2024; v1 submitted 1 August, 2024;
originally announced August 2024.
-
Comparative studies of plastic scintillator strips with high technical attenuation length for the total-body J-PET scanner
Authors:
L. Kaplon,
J. Baran,
N. Chug,
A. Coussat,
C. Curceanu,
E. Czerwinski,
M. Dadgar,
K. Dulski,
J. Gajewski,
A. Gajos,
B. Hiesmayr,
E. Kavya Valsan,
K. Klimaszewski,
G. Korcyl,
T. Kozik,
W. Krzemien,
D. Kumar,
G. Moskal,
S. Niedzwiecki,
D. Panek,
S. Parzych,
E. Perez del Rio,
L. Raczynski,
A. Rucinski,
S. Sharma
, et al. (9 additional authors not shown)
Abstract:
Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blu…
▽ More
Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blue-emitting plastic scintillators with low attenuation of visible light were tested, namely: polyvinyl toluene-based BC-408, EJ-200, RP-408, and polystyrene-based Epic, SP32 and UPS-923A. For determination of the best type of plastic scintillator for totalbody Jagiellonian positron emission tomograph (TB-J-PET) construction, emission and transmission spectra, and technical attenuation length (TAL) of blue light-emitting by the scintillators were measured and compared. The TAL values were determined with the use of UV lamp as excitation source, and photodiode as light detector. Emission spectra of investigated scintillators have maxima in the range from 420 nm to 429 nm. The BC-408 and EJ-200 have the highest transmittance values of about 90% at the maximum emission wavelength measured through a 6 mm thick scintillator strip and the highest technical attenuation length reaching about 2000 mm, allowing assembly of long detection modules for time-of-flight (TOF) J-PET scanners. Influence of the 6 mm x 6 mm, 12 mm x 6 mm, 24 mm x 6 mm cross-sections of the 1000 mm long EJ-200 plastic scintillator on the TAL and signal intensity was measured. The highest TAL value was determined for samples with 24 mm x 6 mm cross-section.
△ Less
Submitted 3 August, 2024; v1 submitted 28 July, 2024;
originally announced July 2024.
-
Phase-Imaging Ion-Cyclotron-Resonance Mass Spectrometry with the Canadian Penning Trap at CARIBU
Authors:
D. Ray,
A. A. Valverde,
M. Brodeur,
F. Buchinger,
J. A. Clark,
B. Liu,
G. E. Morgan,
R. Orford,
W. S. Porter,
G. Savard,
K. S. Sharma,
X. L. Yan
Abstract:
The Canadian Penning Trap mass spectrometer (CPT) has conducted precision mass measurements of neutron-rich nuclides from the CAlifornia Rare Isotope Breeder Upgrade (CARIBU) of the Argonne Tandem Linac Accelerator System (ATLAS) facility at Argonne National Laboratory for over a decade, first using Time-Of-Flight Ion-Cyclotron-Resonance (TOF-ICR) and later using Phase-Imaging Ion-Cyclotron-Resona…
▽ More
The Canadian Penning Trap mass spectrometer (CPT) has conducted precision mass measurements of neutron-rich nuclides from the CAlifornia Rare Isotope Breeder Upgrade (CARIBU) of the Argonne Tandem Linac Accelerator System (ATLAS) facility at Argonne National Laboratory for over a decade, first using Time-Of-Flight Ion-Cyclotron-Resonance (TOF-ICR) and later using Phase-Imaging Ion-Cyclotron-Resonance (PI-ICR) techniques. Here we give an overview of the CPT system as it was operated for PI-ICR measurements at CARIBU for over half a decade, along with some recently studied systematic effects.
△ Less
Submitted 22 July, 2024; v1 submitted 17 July, 2024;
originally announced July 2024.
-
Non-maximal entanglement of photons from positron-electron annihilation demonstrated using a novel plastic PET scanner
Authors:
P. Moskal,
D. Kumar,
S. Sharma,
E. Y. Beyene,
N. Chug,
A. Coussat,
C. Curceanu,
E. Czerwinski,
M. Das,
K. Dulski,
M. Gorgol,
B. Jasinska,
K. Kacprzak,
T. Kaplanoglu,
L. Kaplon,
K. Klimaszewski,
T. Kozik,
E. Lisowski,
F. Lisowski,
W. Mryka,
S. Niedzwiecki,
S. Parzych,
E. P. del Rio,
L. Raczynski,
M. Radler
, et al. (7 additional authors not shown)
Abstract:
In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originat…
▽ More
In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originated. Here we present a novel J-PET scanner built from plastic scintillators, in which annihilation photons interact predominantly via the Compton effect, providing information about photon polarization in addition to information on photon direction of propagation. Theoretically, photons from the decay of positronium in a vacuum are maximally entangled in polarization. However, in matter, when the positron from positronium annihilates with the electron bound to the atom, the question arises whether the photons from such annihilation are maximally entangled. In this work, we determine the distribution of the relative angle between polarization orientations of two photons from positron-electron annihilation in a porous polymer. Contrary to prior results for positron annihilation in aluminum and copper, where the strength of observed correlations is as expected for maximally entangled photons, our results show a significant deviation. We demonstrate that in porous polymer, photon polarization correlation is weaker than for maximally entangled photons but stronger than for separable photons. The data indicate that more than 40% of annihilations in Amberlite resin lead to a non-maximally entangled state. Our result indicates the degree of correlation depends on the annihilation mechanism and the molecular arrangement. We anticipate that the introduced Compton interaction-based PET system opens a promising perspective for exploring polarization correlations in PET as a novel diagnostic indicator.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Fast and spectrally accurate construction of adaptive diagonal basis sets for electronic structure
Authors:
Michael Lindsey,
Sandeep Sharma
Abstract:
In this article, we combine the periodic sinc basis set with a curvilinear coordinate system for electronic structure calculations. This extension allows for variable resolution across the computational domain, with higher resolution close to the nuclei and lower resolution in the inter-atomic regions. We address two key challenges that arise while using basis sets obtained by such a coordinate tr…
▽ More
In this article, we combine the periodic sinc basis set with a curvilinear coordinate system for electronic structure calculations. This extension allows for variable resolution across the computational domain, with higher resolution close to the nuclei and lower resolution in the inter-atomic regions. We address two key challenges that arise while using basis sets obtained by such a coordinate transformation. First, we use pseudospectral methods to evaluate the integrals needed to construct the Hamiltonian in this basis. Second, we demonstrate how to construct an appropriate coordinate transformation by solving the Monge-Ampère equation using a new approach that we call the cyclic Knothe-Rosenblatt flow. The solution of both of these challenges enables mean-field calculations at a cost that is log-linear in the number of basis functions. We demonstrate that our method approaches the complete basis set limit faster than basis sets with uniform resolution. We also emphasize how these basis sets satisfy the diagonal approximation, which is shown to be a consequence of the pseudospectral method. The diagonal approximation is highly desirable for the solution of the electronic structure problem in many frameworks, including mean field theories, tensor network methods, quantum computing, and quantum Monte Carlo.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Unraveling Abnormal Collective Effects via the Non-Monotonic Number Dependence of Electron Transfer in Confined Electromagnetic Fields
Authors:
Shravan Kumar Sharma,
Hsing-Ta Chen
Abstract:
Strong light-matter coupling within an optical cavity leverages the collective interactions of molecules and confined electromagnetic fields, giving rise to the possibilities of modifying chemical reactivity and molecular properties. While collective optical responses, such as enhanced Rabi splitting, are often observed, the overall effect of the cavity on molecular systems remains ambiguous for a…
▽ More
Strong light-matter coupling within an optical cavity leverages the collective interactions of molecules and confined electromagnetic fields, giving rise to the possibilities of modifying chemical reactivity and molecular properties. While collective optical responses, such as enhanced Rabi splitting, are often observed, the overall effect of the cavity on molecular systems remains ambiguous for a large number of molecules. In this paper, we investigate the non-adiabatic electron transfer (ET) process in electron donor-acceptor pairs influenced by collective excitation and local molecular dynamics. Using the timescale difference between reorganization and thermal fluctuations, we derive analytical formulas for the electron transfer rate constant and the polariton relaxation rate. These formulas apply to any number of molecules ($N$) and account for the collective effect as induced by cavity photon coupling. Our findings reveal a non-monotonic dependence of the rate constant on $N$, which can be understood by the interplay between electron transfer and polariton relaxation. As a result, the cavity-induced quantum yield increases linearly with $N$ for small $N$ (as predicted by a simple Dicke model), but shows a turnover and suppression for large $N$ (consistent with the large $N$ problem of polariton chemistry). We also interrelate the thermal bath frequency and the number of molecules, suggesting the optimal number for maximizing enhancement. The analysis provides an analytical insight for understanding the collective excitation of light and electron transfer, helping to predict the optimal condition for effective cavity-controlled chemical reactivity.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Real-time antiproton annihilation vertexing with sub-micron resolution
Authors:
M. Berghold,
D. Orsucci,
F. Guatieri,
S. Alfaro,
M. Auzins,
B. Bergmann,
P. Burian,
R. S. Brusa,
A. Camper,
R. Caravita,
F. Castelli,
G. Cerchiari,
R. Ciuryło,
A. Chehaimi,
G. Consolati,
M. Doser,
K. Eliaszuk,
R. Ferguson,
M. Germann,
A. Giszczak,
L. T. Glöggler,
Ł. Graczykowski,
M. Grosbart,
F. Guatieri,
N. Gusakova
, et al. (42 additional authors not shown)
Abstract:
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric…
▽ More
The primary goal of the AEgIS experiment is to precisely measure the free fall of antihydrogen within Earth's gravitational field. To this end, a cold ~50K antihydrogen beam has to pass through two grids forming a moiré deflectometer before annihilating onto a position-sensitive detector, which shall determine the vertical position of the annihilation vertex relative to the grids with micrometric accuracy. Here we introduce a vertexing detector based on a modified mobile camera sensor and experimentally demonstrate that it can measure the position of antiproton annihilations with an accuracy of $0.62^{+0.40}_{-0.22}μm$, which represents a 35-fold improvement over the previous state-of-the-art for real-time antiproton vertexing. Importantly, these antiproton detection methods are directly applicable to antihydrogen. Moreover, the sensitivity to light of the sensor enables the in-situ calibration of the moiré deflectometer, significantly reducing systematic errors. This sensor emerges as a breakthrough technology for achieving the \aegis scientific goals and has been selected as the basis for the development of a large-area detector for conducting antihydrogen gravity measurements.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Information-theoretic language of proteinoid gels: Boolean gates and QR codes
Authors:
Saksham Sharma,
Adnan Mahmud,
Giuseppe Tarabella,
Panagiotis Mougoyannis,
Andrew Adamatzky
Abstract:
With an aim to build analog computers out of soft matter fluidic systems in future, this work attempts to invent a new information-theoretic language, in the form of two-dimensional Quick Response (QR) codes. This language is, effectively, a digital representation of the analog signals shown by the proteinoids. We use two different experimental techniques: (i) a voltage-sensitive dye and (ii) a pa…
▽ More
With an aim to build analog computers out of soft matter fluidic systems in future, this work attempts to invent a new information-theoretic language, in the form of two-dimensional Quick Response (QR) codes. This language is, effectively, a digital representation of the analog signals shown by the proteinoids. We use two different experimental techniques: (i) a voltage-sensitive dye and (ii) a pair of differential electrodes, to record the analog signals. The analog signals are digitally approximatied (synthesised) by sampling the analog signals into a series of discrete values, which are then converted into binary representations. We have shown the AND-OR-NOT-XOR-NOR-NAND-XNOR gate representation of the digitally sampled signal of proteinoids. Additional encoding schemes are applied to convert the binary code identified above to a two-dimensional QR code. As a result, the QR code becomes a digital, unique marker of a given proteinoid network. We show that it is possible to retrieve the analog signal from the QR code by scanning the QR code using a mobile phone. Our work shows that soft matter fluidic systems, such as proteinoids, can have a fundamental informatiom-theoretic language, unique to their internal information transmission properties (electrical activity in this case) - such a language can be made universal and accessible to everyone using 2D QR codes, which can digitally encode their internal properties and give an option to recover the original signal when required. On a more fundamental note, this study identifies the techniques of approximating continuum properties of soft matter fluidic systems using a series representation of gates and QR codes, which are a piece-wise digital representation, and thus one step closer to programming the fluids using information-theoretic methods, as suggested almost a decade ago by Tao's fluid program.
△ Less
Submitted 31 March, 2024;
originally announced May 2024.
-
Experimental investigation of an electronegative cylindrical capacitively coupled geometrically asymmetric plasma discharge with an axisymmetric magnetic field
Authors:
Swati Dahiya,
Narayan Sharma,
Shivani Geete,
Sarveshwar Sharma,
Nishant Sirse,
Shantanu Karkari
Abstract:
In this study, we have investigated the production of negative ions by mixing electronegative oxygen gas with electropositive argon gas in a geometrically asymmetric cylindrical capacitively coupled radio frequency plasma discharge. The plasma parameters such as density (electron, positive and negative ion), negative ion fraction, and electron temperature are investigated for fixed gas pressure an…
▽ More
In this study, we have investigated the production of negative ions by mixing electronegative oxygen gas with electropositive argon gas in a geometrically asymmetric cylindrical capacitively coupled radio frequency plasma discharge. The plasma parameters such as density (electron, positive and negative ion), negative ion fraction, and electron temperature are investigated for fixed gas pressure and increasing axial magnetic field strength. The axisymmetric magnetic field creates an ExB drift in the azimuthal direction, leading to the confinement of high-energy electrons at the radial edge of the chamber, resulting in decreased species density and negative ion fraction in the plasma bulk. However, the electron temperature increases with the magnetic field. It is concluded that low magnetic fields are better suited for negative ion production in such devices. Furthermore, in addition to the percentage ratio of the two gases, the applied axial magnetic field also plays a vital role in controlling negative ion fraction.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Light induced magnetic order
Authors:
T. Jauk,
H. Hampel,
J. Walowski,
K. Komatsu,
J. Kredl,
E. I. Harris-Lee,
J. K. Dewhurst,
M. Münzenberg,
S. Shallcross,
S. Sharma,
M. Schultze
Abstract:
Heat and disorder are opponents of magnetism. This fact, expressed in Curie's law established more than a century ago, holds even in the highly non-equilibrium interaction of ultra-intense laser pulses with magnetic matter. In contradiction to this, here we demonstrate that optical excitation of a ferromagnet can abrogate the link between temperature and order and observe 100 femtosecond class las…
▽ More
Heat and disorder are opponents of magnetism. This fact, expressed in Curie's law established more than a century ago, holds even in the highly non-equilibrium interaction of ultra-intense laser pulses with magnetic matter. In contradiction to this, here we demonstrate that optical excitation of a ferromagnet can abrogate the link between temperature and order and observe 100 femtosecond class laser pulses to drive a reduction in spin entropy, concomitant to an increase in spin polarization and magnetic moment persisting after relaxation back to local charge equilibrium. This both establishes disorder as an unexpected resource for magnetic control at ultrafast times and, by the provision of a purely electronic mechanism that does not involve reconfiguration of the crystal lattice, suggests a novel scheme for spin-based signal processing and information storage significantly faster than current methodology.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Chemistry Beyond Exact Solutions on a Quantum-Centric Supercomputer
Authors:
Javier Robledo-Moreno,
Mario Motta,
Holger Haas,
Ali Javadi-Abhari,
Petar Jurcevic,
William Kirby,
Simon Martiel,
Kunal Sharma,
Sandeep Sharma,
Tomonori Shirakawa,
Iskandar Sitdikov,
Rong-Yang Sun,
Kevin J. Sung,
Maika Takita,
Minh C. Tran,
Seiji Yunoki,
Antonio Mezzacapo
Abstract:
A universal quantum computer can be used as a simulator capable of predicting properties of diverse quantum systems. Electronic structure problems in chemistry offer practical use cases around the hundred-qubit mark. This appears promising since current quantum processors have reached these sizes. However, mapping these use cases onto quantum computers yields deep circuits, and for for pre-fault-t…
▽ More
A universal quantum computer can be used as a simulator capable of predicting properties of diverse quantum systems. Electronic structure problems in chemistry offer practical use cases around the hundred-qubit mark. This appears promising since current quantum processors have reached these sizes. However, mapping these use cases onto quantum computers yields deep circuits, and for for pre-fault-tolerant quantum processors, the large number of measurements to estimate molecular energies leads to prohibitive runtimes. As a result, realistic chemistry is out of reach of current quantum computers in isolation. A natural question is whether classical distributed computation can relieve quantum processors from parsing all but a core, intrinsically quantum component of a chemistry workflow. Here, we incorporate quantum computations of chemistry in a quantum-centric supercomputing architecture, using up to 6400 nodes of the supercomputer Fugaku to assist a Heron superconducting quantum processor. We simulate the N$_2$ triple bond breaking in a correlation-consistent cc-pVDZ basis set, and the active-space electronic structure of [2Fe-2S] and [4Fe-4S] clusters, using 58, 45 and 77 qubits respectively, with quantum circuits of up to 10570 (3590 2-qubit) quantum gates. We obtain our results using a class of quantum circuits that approximates molecular eigenstates, and a hybrid estimator. The estimator processes quantum samples, produces upper bounds to the ground-state energy and wavefunctions supported on a polynomial number of states. This guarantees an unconditional quality metric for quantum advantage, certifiable by classical computers at polynomial cost. For current error rates, our results show that classical distributed computing coupled to quantum processors can produce good approximate solutions for practical problems beyond sizes amenable to exact diagonalization.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Convergence Analysis of the Stochastic Resolution of Identity: Comparing Hutchinson to Hutch++ for the Second-Order Green's Function
Authors:
Leopoldo Mejía,
Sandeep Sharma,
Roi Baer,
Garnet Kin-Lic Chan,
Eran Rabani
Abstract:
Stochastic orbital techniques offer reduced computational scaling and memory requirements to describe ground and excited states at the cost of introducing controlled statistical errors. Such techniques often rely on two basic operations, stochastic trace estimation and stochastic resolution of identity, both of which lead to statistical errors that scale with the number of stochastic realizations…
▽ More
Stochastic orbital techniques offer reduced computational scaling and memory requirements to describe ground and excited states at the cost of introducing controlled statistical errors. Such techniques often rely on two basic operations, stochastic trace estimation and stochastic resolution of identity, both of which lead to statistical errors that scale with the number of stochastic realizations ($N_ξ$) as $\sqrt{N_ξ^{-1}}$. Reducing the statistical errors without significantly increasing $N_ξ$ has been challenging and is central to the development of efficient and accurate stochastic algorithms. In this work, we build upon recent progress made to improve stochastic trace estimation based on the ubiquitous Hutchinson's algorithm and propose a two-step approach for the stochastic resolution of identity, in the spirit of the Hutch++ method. Our approach is based on employing a randomized low-rank approximation followed by a residual calculation, resulting in statistical errors that scale much better than $\sqrt{N_ξ^{-1}}$. We implement the approach within the second-order Born approximation for the self-energy in the computation of neutral excitations and discuss three different low-rank approximations for the two-body Coulomb integrals. Tests on a series of hydrogen dimer chains with varying lengths demonstrate that the Hutch++-like approximations are computationally more efficient than both deterministic and purely stochastic (Hutchinson) approaches for low error thresholds and intermediate system sizes. Notably, for arbitrarily large systems, the Hutchinson-like approximation outperforms both deterministic and Hutch++-like methods.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
PT Symmetry, induced mechanical lasing and tunable force sensing in a coupled-mode optically levitated nanoparticle
Authors:
Sandeep Sharma,
A. Kani,
M. Bhattacharya
Abstract:
We theoretically investigate PT symmetry, induced mechanical lasing and force sensing in an optically levitated nanoparticle with coupled oscillation modes. The coupling in the levitated system is created by the modulation of an asymmetric optical potential in the plane transverse to the beam trapping the nanoparticle. We show that such a coupling can lead to PT-symmetric mechanical behavior for e…
▽ More
We theoretically investigate PT symmetry, induced mechanical lasing and force sensing in an optically levitated nanoparticle with coupled oscillation modes. The coupling in the levitated system is created by the modulation of an asymmetric optical potential in the plane transverse to the beam trapping the nanoparticle. We show that such a coupling can lead to PT-symmetric mechanical behavior for experimentally realistic parameters. Further, by examining the phonon dynamics and the second-order coherence of the nanoparticle modes, we determine that induced mechanical lasing is also possible. Finally, we demonstrate that tunable ultra-sensitive force sensing can be engineered in the system. Our studies represent an advance in the fields of coherent manipulation of coupled degrees of freedom of levitated mechanical oscillators and their application for sensing.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Efficient diffraction control using a tunable active-Raman gain medium
Authors:
Sandeep Sharma
Abstract:
We present a new scheme to create all-optical tunable and lossless waveguide using a controllable coherent Raman process in an atomic rubidium vapor in N-type configuration. We employ a Gaussian Raman field and a Laguerre-Gaussian control field to imprint a high-contrast tunable waveguide-like feature inside the atomic medium. We numerically demonstrate that such a waveguide is able to guide arbit…
▽ More
We present a new scheme to create all-optical tunable and lossless waveguide using a controllable coherent Raman process in an atomic rubidium vapor in N-type configuration. We employ a Gaussian Raman field and a Laguerre-Gaussian control field to imprint a high-contrast tunable waveguide-like feature inside the atomic medium. We numerically demonstrate that such a waveguide is able to guide arbitrary modes of a weak probe beam to several Rayleigh length without diffraction and absorption. Our results on all-optical waveguide based scheme may have potential application in lossless image processing, high contrast biomedical imaging and image metrology.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Coherent control of an optical tweezer phonon laser
Authors:
Kai Zhang,
Kewen Xiao,
Danika Luntz-Martin,
Ping Sun,
S. Sharma,
M. Bhattacharya,
A. N. Vamivakas
Abstract:
The creation and manipulation of coherence continues to capture the attention of scientists and engineers. The optical laser is a canonical example of a system that, in principle, exhibits complete coherence. Recent research has focused on the creation of coherent, laser-like states in other physical systems. The phonon laser is one example where it is possible to amplify self-sustained mechanical…
▽ More
The creation and manipulation of coherence continues to capture the attention of scientists and engineers. The optical laser is a canonical example of a system that, in principle, exhibits complete coherence. Recent research has focused on the creation of coherent, laser-like states in other physical systems. The phonon laser is one example where it is possible to amplify self-sustained mechanical oscillations. A single mode phonon laser in a levitated optical tweezer has been demonstrated through appropriate balance of active feedback gain and damping. In this work, coherent control of the dynamics of an optical tweezer phonon laser is used to share coherence between its different modes of oscillation, creating a multimode phonon laser. The coupling of the modes is achieved by periodically rotating the asymmetric optical potential in the transverse focal plane of the trapping beam via trap laser polarization rotation. The presented theory and experiment demonstrate that coherence can be transferred across different modes of an optical tweezer phonon laser, and are a step toward using these systems for precision measurement and quantum information processing.
△ Less
Submitted 18 April, 2024; v1 submitted 15 April, 2024;
originally announced April 2024.
-
Coherent control of levitated nanoparticles via dipole-dipole interaction
Authors:
Sandeep Sharma,
Seongi Hong,
Andrey S. Moskalenko
Abstract:
We propose a scheme to create and transfer thermal squeezed states and random-phase coherent states in a system of two interacting levitated nanoparticles. In this coupled levitated system, we create a thermal squeezed state of motion in one of the nanoparticles by parametrically driving it and then transferring the state to the other nanoparticle with high fidelity. The transfer mechanism is base…
▽ More
We propose a scheme to create and transfer thermal squeezed states and random-phase coherent states in a system of two interacting levitated nanoparticles. In this coupled levitated system, we create a thermal squeezed state of motion in one of the nanoparticles by parametrically driving it and then transferring the state to the other nanoparticle with high fidelity. The transfer mechanism is based on inducing a non-reciprocal type of coupling in the system by suitably modulating the phases of the trapping lasers and the inter-particle distance between the levitated nanoparticles. This non-reciprocal coupling creates a unidirectional channel where information flows from one nanoparticle to the other nanoparticle but not vice versa, thereby allowing for transfer of mechanical states between the nanoparticles with high fidelity. We also affirm this transfer mechanism by creating and efficiently transferring a random-phase coherent state in the coupled levitated system. Further, we make use of the feedback nonlinearity and parametric driving to create simultaneous bistability in the coupled levitated system. Our results may have potential applications in quantum information processing, quantum metrology, and in exploring many-body physics under a controlled environment.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Use of multigrids to reduce the cost of performing interpolative separable density fitting
Authors:
Kori E. Smyser,
Alec White,
Sandeep Sharma
Abstract:
In this article, we present an interpolative separable density fitting (ISDF) based algorithm to calculate exact exchange in periodic mean field calculations. In the past, decomposing the two-electron integrals into tensor hypercontraction (THC) form using ISDF was the most expensive step of the entire mean field calculation. Here we show that by using a multigrid-ISDF algorithm both the memory an…
▽ More
In this article, we present an interpolative separable density fitting (ISDF) based algorithm to calculate exact exchange in periodic mean field calculations. In the past, decomposing the two-electron integrals into tensor hypercontraction (THC) form using ISDF was the most expensive step of the entire mean field calculation. Here we show that by using a multigrid-ISDF algorithm both the memory and the CPU cost of this step can be reduced. The CPU cost is brought down from cubic scaling to quadratic scaling with a low computational prefactor which reduces the cost by almost two orders of magnitude. Thus, in the new algorithm, the cost of performing ISDF is largely negligible compared to other steps. Along with the CPU cost, the memory cost of storing the factorized two-electron integrals is also reduced by a factor of up to 35. With the current algorithm, we can perform Hartree-Fock calculations on a Diamond supercell containing more than 17,000 basis functions and more than 1,500 electrons on a single node with no disk usage. For this calculation, the cost of constructing the exchange matrix is only a factor of four slower than the cost of diagonalizing the Fock matrix. Augmenting our approach with linear scaling algorithms can further speed up the calculations.
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
Establishing Criteria for the Transition from Kinetic to Fluid Modeling in Hollow Cathode Analysis
Authors:
Willca Villafana,
Andrew T. Powis,
Sarveshwar Sharma,
Igor D. Kaganovich,
Alexander V. Khrabrov
Abstract:
In this study, we conduct 2D3V Particle-In-Cell simulations of hollow cathodes, encompassing both the channel and plume region, with an emphasis on plasma switch applications. The plasma in the hollow cathode channel can exhibit kinetic effects depending on how fast electrons emitted from the insert are thermalized via Coulomb collisions. The criterion that determines whether the plasma operates i…
▽ More
In this study, we conduct 2D3V Particle-In-Cell simulations of hollow cathodes, encompassing both the channel and plume region, with an emphasis on plasma switch applications. The plasma in the hollow cathode channel can exhibit kinetic effects depending on how fast electrons emitted from the insert are thermalized via Coulomb collisions. The criterion that determines whether the plasma operates in a Duid or kinetic regime is given as follows. When Coulomb collisions occur at a much greater rate than ionization or excitation events, the Electron Energy Distribution Function relaxes to aMaxwellian distribution and the plasmawithin the channel can be describedwith aDuidmodel. In contrast, if inelastic processes are much faster, then the Electron Energy Distribution Function in the channel exhibits a notable high-energy tail, and a kinetic treatment is required. This criterion is applied to other kinds of hollow cathodes from the literature, revealing that a Duid approach is suitable for most electric propulsion applications, whereas a kinetic treatment might be necessary for plasma switches. Additionally, amomentumbalance reveals that a diffusion equation is sufAcient to predict the plasma plume expansion, a crucial input in the design of hollow cathodes for plasma switch applications.
△ Less
Submitted 12 April, 2024;
originally announced April 2024.
-
Elasticity affects the shock-induced aerobreakup of a polymeric droplet
Authors:
Navin Kumar Chandra,
Shubham Sharma,
Saptarshi Basu,
Aloke Kumar
Abstract:
Boger fluids are viscoelastic liquids having constant viscosity for a broad range of shear rates. They are commonly used to separate the effects of liquid elasticity from viscosity in any experiment. We present an experimental study on the shock-induced aerobreakup of a Boger fluid droplet in the Shear-induced entrainment (SIE) and catastrophic breakup regime (Weber number ranging from ~ 800 to 50…
▽ More
Boger fluids are viscoelastic liquids having constant viscosity for a broad range of shear rates. They are commonly used to separate the effects of liquid elasticity from viscosity in any experiment. We present an experimental study on the shock-induced aerobreakup of a Boger fluid droplet in the Shear-induced entrainment (SIE) and catastrophic breakup regime (Weber number ranging from ~ 800 to 5000). The results are compared with the aerobreakup of a Newtonian droplet having similar viscosity, and with shear-thinning droplets. The study aims to identify the role of liquid elasticity without the added complexity of simultaneous shear-thinning behavior. It is observed that at the early stages of droplet breakup, liquid elasticity plays an insignificant role, and all the fluids show similar behavior. However, during the late stages, the impact of liquid elasticity becomes dominant, which results in a markedly different morphology of the fragmenting liquid mass compared to a Newtonian droplet.
△ Less
Submitted 11 March, 2024;
originally announced March 2024.
-
SuperdropNet: a Stable and Accurate Machine Learning Proxy for Droplet-based Cloud Microphysics
Authors:
Shivani Sharma,
David Greenberg
Abstract:
Cloud microphysics has important consequences for climate and weather phenomena, and inaccurate representations can limit forecast accuracy. While atmospheric models increasingly resolve storms and clouds, the accuracy of the underlying microphysics remains limited by computationally expedient bulk moment schemes based on simplifying assumptions. Droplet-based Lagrangian schemes are more accurate…
▽ More
Cloud microphysics has important consequences for climate and weather phenomena, and inaccurate representations can limit forecast accuracy. While atmospheric models increasingly resolve storms and clouds, the accuracy of the underlying microphysics remains limited by computationally expedient bulk moment schemes based on simplifying assumptions. Droplet-based Lagrangian schemes are more accurate but are underutilized due to their large computational overhead. Machine learning (ML) based schemes can bridge this gap by learning from vast droplet-based simulation datasets, but have so far struggled to match the accuracy and stability of bulk moment schemes. To address this challenge, we developed SuperdropNet, an ML-based emulator of the Lagrangian superdroplet simulations. To improve accuracy and stability, we employ multi-step autoregressive prediction during training, impose physical constraints, and carefully control stochasticity in the training data. Superdropnet predicted hydrometeor states and cloud-to-rain transition times more accurately than previous ML emulators, and matched or outperformed bulk moment schemes in many cases. We further carried out detailed analyses to reveal how multistep autoregressive training improves performance, and how the performance of SuperdropNet and other microphysical schemes hydrometeors' mass, number and size distribution. Together our results suggest that ML models can effectively emulate cloud microphysics, in a manner consistent with droplet-based simulations.
△ Less
Submitted 28 February, 2024;
originally announced February 2024.
-
Charged particle dynamics in an elliptically polarized electromagnetic wave and a uniform axial magnetic field
Authors:
Shivam Kumar Mishra,
Sarveshwar Sharma,
Sudip Sengupta
Abstract:
An analytical study of the charged particle dynamics in the presence of an elliptically polarized electromagnetic wave and a uniform axial magnetic field, is presented. It is found that for $gω_{0}/ ω' = \pm 1$, maximum energy gain occurs respectively for linear and circular polarization; $ω_{0}$ and $ω'$ respectively being the cyclotron frequency of the charged particle in the external magnetic f…
▽ More
An analytical study of the charged particle dynamics in the presence of an elliptically polarized electromagnetic wave and a uniform axial magnetic field, is presented. It is found that for $gω_{0}/ ω' = \pm 1$, maximum energy gain occurs respectively for linear and circular polarization; $ω_{0}$ and $ω'$ respectively being the cyclotron frequency of the charged particle in the external magnetic field and Doppler-shifted frequency of the wave seen by the particle, and $g =\pm 1$ respectively correspond to left and right-handedness of the polarization. An explicit solution of the governing equation is presented in terms of particle position or laboratory time, for the specific case of resonant energy gain in a circularly polarized electromagnetic wave. These explicit position- or time-dependent expressions are useful for better insight into various phenomena, viz., cosmic ray generation, microwave generation, plasma heating, and particle acceleration, etc.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
Freezing of sessile droplet and frost halo formation
Authors:
Sivanandan Kavuri,
George Karapetsas,
Chander Shekhar Sharma,
Kirti Chandra Sahu
Abstract:
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The f…
▽ More
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The formation of the frost halo is associated with the inherent evaporation process in the early freezing stages. We observe a negative evaporation flux enveloping the droplet in the initial stages, which indicates that vapour produced during freezing condenses on the substrate close to the contact line, forming a frost halo. The condensate accumulation triggers re-evaporation, resulting in a temporal shift of the frost halo region away from the contact line. Eventually, it disappears due to the diffusive nature of the water vapour far away from the droplet. We found that increasing the relative humidity increases the lifetime of the frost halo due to a substantial reduction in evaporation that prolonged the presence of net condensate on the substrate. Increasing liquid volatility increases the evaporation flux, and condensation occurs closer to the droplet, as a higher amount of vapour is in the periphery of the droplet. We also found that decreasing the thermal conductivity of the substrate increases the total freezing time. The slower freezing process is accompanied by increased vaporized liquid, resulting in condensation with its concentration reaching supersaturation.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Volkov solutions for relativistic magnetized plasma in strong field quantum electrodynamics regime
Authors:
B. S. Sharma,
Garima Yadav,
R. C. Dhabhai,
N. K. Jaiman
Abstract:
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the e…
▽ More
This study shows the dynamics of relativistic electrons in terms of Dirac equation solutions when an ultra-intense short laser pulse of intensity $\ge 10^{23} {W.cm^{-2}}$ propagates through magnetized dense plasma ($B_0\approx {1MG})$. The interaction dynamics is analyzed near the strong-field quantum electrodynamics (SF-QED) regime. Our study finds new solutions in plasma media considering the effects of the re-normalized mass of relativistic electrons and the nonzero effective mass of accelerated photons. We have provided a general method for constructing exact solutions of the Dirac relativistic equation that correctly explains the dynamics of electrons in the strongly magnetized plasma medium. The modified solutions of the Dirac equation for one electron are derived and compared to the Volkov solutions. The new solutions are a basis for a feasible explanation of quantum attributes of relativistic electrons in a strong electromagnetic field of very short ultra-intense laser pulses with intensity near Schwinger field intensity. The solutions are called new Volkov solutions in a plasma medium. These solutions can be used to understand better the theory of quantum radiation reaction for the next-generation laser-plasma accelerator. Our results show that the Volkov solutions are not applicable in a magnetized plasma medium
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
Optically Induced Ferromagnetic Order in a Ferrimagnet
Authors:
Sergii Parchenko,
Agne Åberg Larsson,
Vassilios Kapaklis,
Sangeeta Sharma,
Andreas Scherz
Abstract:
The parallel or antiparallel arrangement of electron spins plays a pivotal role in determining the properties of a physical system. To meet the demands for innovative technological solutions, extensive efforts have been dedicated to exploring effective methods for controlling and manipulating this arrangement [1]. Among various techniques, ultrashort laser pulses have emerged as an exceptionally e…
▽ More
The parallel or antiparallel arrangement of electron spins plays a pivotal role in determining the properties of a physical system. To meet the demands for innovative technological solutions, extensive efforts have been dedicated to exploring effective methods for controlling and manipulating this arrangement [1]. Among various techniques, ultrashort laser pulses have emerged as an exceptionally efficient tool to influence magnetic order. Ultrafast suppression of the magnetic order [2,3], all-optical magnetization switching [4, 5, 6, 7], and light-induced magnetic phase transitions [8] are just a few notable examples. However, the transient nature of light-induced changes in the magnetic state has been a significant limitation, hindering their practical implementation. In this study, we demonstrate that infrared ultrashort laser pulses can induce a ferromagnetic arrangement of magnetic moments in an amorphous TbCo alloy, a material that exhibits ferrimagnetism under equilibrium conditions. Strikingly, the observed changes in the magnetic properties persist for significantly longer durations than any previously reported findings. Our results reveal that ultrashort optical pulses can generate materials with identical chemical composition and structural state but entirely distinct magnetic arrangements, leading to unique magnetic properties. This breakthrough discovery marks a new era in light-driven control of matter, offering the exciting potential to create materials with properties that were once considered unattainable.
△ Less
Submitted 10 November, 2023; v1 submitted 9 November, 2023;
originally announced November 2023.
-
Condensate droplet roaming on nanostructured superhydrophobic surfaces
Authors:
Cheuk Wing Edmond Lam,
Kartik Regulagadda,
Matteo Donati,
Abinash Tripathy,
Gopal Chandra Pal,
Chander Shekhar Sharma,
Athanasios Milionis,
Dimos Poulikakos
Abstract:
Jumping of coalescing condensate droplets from superhydrophobic surfaces is an interesting phenomenon which yields marked heat transfer enhancement over the more explored gravity-driven droplet removal mode in surface condensation, a phase change process of central interest to applications ranging from energy to water harvesting. However, when condensate microdroplets coalesce, they can also spont…
▽ More
Jumping of coalescing condensate droplets from superhydrophobic surfaces is an interesting phenomenon which yields marked heat transfer enhancement over the more explored gravity-driven droplet removal mode in surface condensation, a phase change process of central interest to applications ranging from energy to water harvesting. However, when condensate microdroplets coalesce, they can also spontaneously propel themselves omnidirectionally on the surface independent of gravity and grow by feeding from droplets they sweep along the way. Here we observe and explain the physics behind this phenomenon of roaming of coalescing condensate microdroplets on solely nanostructured superhydrophobic surfaces, where the microdroplets are orders of magnitude larger than the underlaying surface nanotexture. We quantify and show that it is the inherent asymmetries in droplet adhesion during condensation, arising from the stochastic nature of nucleation within the nanostructures, that generates the tangential momentum driving the roaming motion. Subsequent dewetting during this conversion initiates a vivid roaming and successive coalescence process, preventing condensate flooding of the surface, and enhancing surface renewal. Finally, we show that the more efficient conversion process of roaming from excess surface energy to kinetic energy results in significantly improved heat transfer efficiency over condensate droplet jumping, the mechanism currently understood as maximum.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Aerodynamic bag breakup of a polymeric droplet
Authors:
Navin Kumar Chandra,
Shubham Sharma,
Saptarshi Basu,
Aloke Kumar
Abstract:
The aerodynamic breakup of a polymeric droplet in the bag breakup regime is investigated experimentally and compared with the result of the Newtonian droplet. To understand the effect of liquid elasticity, the Weber number is kept fixed ($\approx$ 12.5) while the elasticity number is varied in the range of $\sim 10^{-4}-10^{-2}$. Experiments are performed by allowing a liquid droplet to fall in a…
▽ More
The aerodynamic breakup of a polymeric droplet in the bag breakup regime is investigated experimentally and compared with the result of the Newtonian droplet. To understand the effect of liquid elasticity, the Weber number is kept fixed ($\approx$ 12.5) while the elasticity number is varied in the range of $\sim 10^{-4}-10^{-2}$. Experiments are performed by allowing a liquid droplet to fall in a horizontal, continuously flowing air stream. It is observed that the initial deformation dynamics of a polymeric droplet is similar to the Newtonian droplet. However, in the later stages, the actual fragmentation of liquid mass is resisted by the presence of polymers. Depending upon the liquid elasticity, fragmentation can be completely inhibited in the timescale of experimental observation. We provide a framework to study this problem, identify the stages where the role of liquid elasticity can be neglected and where it must be considered, and finally, establish a criterion that governs the occurrence or the absence of fragmentation in a specified time period.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
A systematic investigation of electric field nonlinearity and field reversal in low pressure capacitive discharges driven by sawtooth-like waveforms
Authors:
Sarveshwar Sharma,
Nishant Sirse,
Miles M Turner,
Animesh Kuley
Abstract:
Understanding electron and ion heating phenomenon in capacitively coupled radio-frequency plasma discharges is vital for many plasma processing applications. In this article, using particle-in-cell simulation technique we investigate the collisionless argon discharge excited by temporally asymmetric sawtooth-like waveform. In particular, a systematic study of the electric field nonlinearity and fi…
▽ More
Understanding electron and ion heating phenomenon in capacitively coupled radio-frequency plasma discharges is vital for many plasma processing applications. In this article, using particle-in-cell simulation technique we investigate the collisionless argon discharge excited by temporally asymmetric sawtooth-like waveform. In particular, a systematic study of the electric field nonlinearity and field reversal phenomenon by varying the number of harmonics and its effect on electron and ion heating is performed. The simulation results predict higher harmonics generation and multiple field reversal regions formation with an increasing number of harmonics along with the local charge separation and significant displacement current outside sheath region. The field reversal strength is greater during the expanding phase of the sheath edge in comparison to its collapsing phase causing significant ion cooling. The observed behavior is associated with the electron fluid compression/rarefaction and electron inertia during expanding and collapsing phase respectively.
△ Less
Submitted 23 September, 2023; v1 submitted 15 September, 2023;
originally announced September 2023.
-
Feasibility studies for imaging e$^{+}$e$^{-}$ annihilation with modular multi-strip detectors
Authors:
S. Sharma,
L. Povolo,
S. Mariazzi,
G. Korcyl,
K. Kacprzak,
D. Kumar,
S. Niedzwiecki,
J. Baran,
E. Beyene,
R. S. Brusa,
R. Caravita,
N. Chug,
A. Coussat,
C. Curceanu,
E. Czerwinski,
M. Dadgar,
M. Das,
K. Dulski,
K. Eliyan,
A. Gajos,
N. Gupta,
B. C. Hiesmayr,
L. Kaplon,
T. Kaplanoglu,
K. Klimaszewski
, et al. (19 additional authors not shown)
Abstract:
Studies based on imaging the annihilation of the electron (e$^{-}$) and its antiparticle positron (e$^{+}$) open up several interesting applications in nuclear medicine and fundamental research. The annihilation process involves both the direct conversion of e$^{+}$e$^{-}$ into photons and the formation of their atomically bound state, the positronium atom (Ps), which can be used as a probe for fu…
▽ More
Studies based on imaging the annihilation of the electron (e$^{-}$) and its antiparticle positron (e$^{+}$) open up several interesting applications in nuclear medicine and fundamental research. The annihilation process involves both the direct conversion of e$^{+}$e$^{-}$ into photons and the formation of their atomically bound state, the positronium atom (Ps), which can be used as a probe for fundamental studies. With the ability to produce large quantities of Ps, manipulate them in long-lived Ps states, and image their annihilations after a free fall or after passing through atomic interferometers, this purely leptonic antimatter system can be used to perform inertial sensing studies in view of a direct test of Einstein equivalence principle. It is envisioned that modular multistrip detectors can be exploited as potential detection units for this kind of studies. In this work, we report the results of the first feasibility study performed on a e$^{+}$ beamline using two detection modules to evaluate their reconstruction performance and spatial resolution for imaging e$^{+}$e$^{-}$ annihilations and thus their applicability for gravitational studies of Ps.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Electron Energy Regression in the CMS High-Granularity Calorimeter Prototype
Authors:
Roger Rusack,
Bhargav Joshi,
Alpana Alpana,
Seema Sharma,
Thomas Vadnais
Abstract:
We present a new publicly available dataset that contains simulated data of a novel calorimeter to be installed at the CERN Large Hadron Collider. This detector will have more than six-million channels with each channel capable of position, ionisation and precision time measurement. Reconstructing these events in an efficient way poses an immense challenge which is being addressed with the latest…
▽ More
We present a new publicly available dataset that contains simulated data of a novel calorimeter to be installed at the CERN Large Hadron Collider. This detector will have more than six-million channels with each channel capable of position, ionisation and precision time measurement. Reconstructing these events in an efficient way poses an immense challenge which is being addressed with the latest machine learning techniques. As part of this development a large prototype with 12,000 channels was built and a beam of high-energy electrons incident on it. Using machine learning methods we have reconstructed the energy of incident electrons from the energies of three-dimensional hits, which is known to some precision. By releasing this data publicly we hope to encourage experts in the application of machine learning to develop efficient and accurate image reconstruction of these electrons.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Toward linear scaling auxiliary field quantum Monte Carlo with local natural orbitals
Authors:
Jo S. Kurian,
Hong-Zhou Ye,
Ankit Mahajan,
Timothy C. Berkelbach,
Sandeep Sharma
Abstract:
We develop a local correlation variant of auxiliary field quantum Monte Carlo (AFQMC) that is based on local natural orbitals (LNO-AFQMC). In LNO-AFQMC, independent AFQMC calculations are performed for each localized occupied orbital using a truncated set of tailored orbitals. Because the size of this space does not grow with system size for a target accuracy, the method has linear scaling. Applyi…
▽ More
We develop a local correlation variant of auxiliary field quantum Monte Carlo (AFQMC) that is based on local natural orbitals (LNO-AFQMC). In LNO-AFQMC, independent AFQMC calculations are performed for each localized occupied orbital using a truncated set of tailored orbitals. Because the size of this space does not grow with system size for a target accuracy, the method has linear scaling. Applying LNO AFQMC to molecular problems containing a few hundred to a thousand orbitals, we demonstrate convergence of total energies with significantly reduced costs. The savings are more significant for larger systems and larger basis sets. However, even for our smallest system studied, we find that LNO-AFQMC is cheaper than canonical AFQMC, in contrast with many other reduced-scaling methods. Perhaps most significantly, we show that energy differences converge much more quickly than total energies, making the method ideal for applications in chemistry and material science. Our work paves the way for linear scaling AFQMC calculations of strongly correlated systems, which would have a transformative effect on ab initio quantum chemistry.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Response properties in phaseless auxiliary field quantum Monte Carlo
Authors:
Ankit Mahajan,
Jo S. Kurian,
Joonho Lee,
David R. Reichman,
Sandeep Sharma
Abstract:
We present a method for calculating first-order response properties in phaseless auxiliary field quantum Monte Carlo (AFQMC) through the application of automatic differentiation (AD). Biases and statistical efficiency of the resulting estimators are discussed. Our approach demonstrates that AD enables the calculation of reduced density matrices (RDMs) with the same computational cost scaling as en…
▽ More
We present a method for calculating first-order response properties in phaseless auxiliary field quantum Monte Carlo (AFQMC) through the application of automatic differentiation (AD). Biases and statistical efficiency of the resulting estimators are discussed. Our approach demonstrates that AD enables the calculation of reduced density matrices (RDMs) with the same computational cost scaling as energy calculations, accompanied by a cost prefactor of less than four in our numerical calculations. We investigate the role of self-consistency and trial orbital choice in property calculations.
△ Less
Submitted 10 August, 2023;
originally announced August 2023.
-
Investigation of Compressor Cascade Flow Using Physics- Informed Neural Networks with Adaptive Learning Strategy
Authors:
Zhihui Li,
Francesco Montomoli,
Sanjiv Sharma
Abstract:
In this study, we utilize the emerging Physics Informed Neural Networks (PINNs) approach for the first time to predict the flow field of a compressor cascade. Different from conventional training methods, a new adaptive learning strategy that mitigates gradient imbalance through incorporating adaptive weights in conjunction with dynamically adjusting learning rate is used during the training proce…
▽ More
In this study, we utilize the emerging Physics Informed Neural Networks (PINNs) approach for the first time to predict the flow field of a compressor cascade. Different from conventional training methods, a new adaptive learning strategy that mitigates gradient imbalance through incorporating adaptive weights in conjunction with dynamically adjusting learning rate is used during the training process to improve the convergence of PINNs. The performance of PINNs is assessed here by solving both the forward and inverse problems. In the forward problem, by encapsulating the physical relations among relevant variables, PINNs demonstrate their effectiveness in accurately forecasting the compressor's flow field. PINNs also show obvious advantages over the traditional CFD approaches, particularly in scenarios lacking complete boundary conditions, as is often the case in inverse engineering problems. PINNs successfully reconstruct the flow field of the compressor cascade solely based on partial velocity vectors and near-wall pressure information. Furthermore, PINNs show robust performance in the environment of various levels of aleatory uncertainties stemming from labeled data. This research provides evidence that PINNs can offer turbomachinery designers an additional and promising option alongside the current dominant CFD methods.
△ Less
Submitted 18 September, 2023; v1 submitted 15 July, 2023;
originally announced August 2023.
-
Depth from Defocus Technique: A Simple Calibration-Free Approach for Dispersion Size Measurement
Authors:
Saini Jatin Rao,
Shubham Sharma,
Saptarshi Basu,
Cameron Tropea
Abstract:
Particle size measurement is crucial in various applications, be it sizing droplets in inkjet printing or respiratory events, tracking particulate ejection in hypersonic impacts, or detecting floating target markers in free surface flows. Such systems are characterised by extracting quantitative information like size, position, velocity and number density of the dispersed particles, which is typic…
▽ More
Particle size measurement is crucial in various applications, be it sizing droplets in inkjet printing or respiratory events, tracking particulate ejection in hypersonic impacts, or detecting floating target markers in free surface flows. Such systems are characterised by extracting quantitative information like size, position, velocity and number density of the dispersed particles, which is typically non-trivial. The existing methods like phase Doppler or digital holography offer precise estimates at the expense of complicated systems, demanding significant expertise. We present a novel volumetric measurement approach for estimating the size and position of dispersed spherical particles that utilises a unique 'Depth from Defocus' (DFD) technique with a single camera. The calibration free sizing enables in-situ examination of hard to measure systems, including naturally occurring phenomena like pathogenic aerosols, pollen dispersion or raindrops. The efficacy of the technique is demonstrated for diverse sparse dispersions, including dots, glass beads, spray droplets, and pollen grains. The simple optical configuration and semi-autonomous calibration procedure make the method readily deployable and accessible, with a scope of applicability across vast research horizons.
△ Less
Submitted 3 October, 2023; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Cosmogenic background simulations for the DARWIN observatory at different underground locations
Authors:
M. Adrover,
L. Althueser,
B. Andrieu,
E. Angelino,
J. R. Angevaare,
B. Antunovic,
E. Aprile,
M. Babicz,
D. Bajpai,
E. Barberio,
L. Baudis,
M. Bazyk,
N. Bell,
L. Bellagamba,
R. Biondi,
Y. Biondi,
A. Bismark,
C. Boehm,
A. Breskin,
E. J. Brookes,
A. Brown,
G. Bruno,
R. Budnik,
C. Capelli,
J. M. R. Cardoso
, et al. (158 additional authors not shown)
Abstract:
Xenon dual-phase time projections chambers (TPCs) have proven to be a successful technology in studying physical phenomena that require low-background conditions. With 40t of liquid xenon (LXe) in the TPC baseline design, DARWIN will have a high sensitivity for the detection of particle dark matter, neutrinoless double beta decay ($0νββ$), and axion-like particles (ALPs). Although cosmic muons are…
▽ More
Xenon dual-phase time projections chambers (TPCs) have proven to be a successful technology in studying physical phenomena that require low-background conditions. With 40t of liquid xenon (LXe) in the TPC baseline design, DARWIN will have a high sensitivity for the detection of particle dark matter, neutrinoless double beta decay ($0νββ$), and axion-like particles (ALPs). Although cosmic muons are a source of background that cannot be entirely eliminated, they may be greatly diminished by placing the detector deep underground. In this study, we used Monte Carlo simulations to model the cosmogenic background expected for the DARWIN observatory at four underground laboratories: Laboratori Nazionali del Gran Sasso (LNGS), Sanford Underground Research Facility (SURF), Laboratoire Souterrain de Modane (LSM) and SNOLAB. We determine the production rates of unstable xenon isotopes and tritium due to muon-included neutron fluxes and muon-induced spallation. These are expected to represent the dominant contributions to cosmogenic backgrounds and thus the most relevant for site selection.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
On morphological and functional complexity of proteinoid microspheres
Authors:
Saksham Sharma,
Adnan Mahmud,
Giuseppe Tarabella,
Panagiotis Mougoyannis,
Andrew Adamatzky
Abstract:
Proteinoids are solidified gels made from poly(amino acids) based polymers that exhibit oscillatory electrical activity. It has been proposed that proteinoids are capable of performing analog computing as their electrical activity can be converted into a series of Boolean gates. The current article focuses on decrypting the morphological and functional complexity of the ensembles of proteinoid mic…
▽ More
Proteinoids are solidified gels made from poly(amino acids) based polymers that exhibit oscillatory electrical activity. It has been proposed that proteinoids are capable of performing analog computing as their electrical activity can be converted into a series of Boolean gates. The current article focuses on decrypting the morphological and functional complexity of the ensembles of proteinoid microspheres prepared in the laboratory. We identify two different protocols (one with and one without SEM) to prepare and visualize proteinoid microspheres. To quantify the complexity of proteinoid ensembles, we measure nine complexity metrics (to name a few: average degrees $\textrm{Deg}_{av}$, maximum number of independent cycles $u$, average connections per node $\textrm{Conn}_{av}$, resistance $\textrm{res}_{\textrm{eff}}$, percolation threshold $\textrm{perc}_{\textrm{t}}$) which shine light on the morphological, functional complexity of the proteinoids, and the information transmission that happens across the undirected graph abstraction of the proteinoid microspheres ensembles. We identify the complexity metrics that can distinguish two different protocols of preparation and also the most dense, complex, and less power consuming proteinoid network among all tested. With this work, we hope to provide a complexity toolkit for hardware designers of analog computers to design their systems with the right set of complexity ingredients guided one-to-one by the protocol chosen at the first place. On a more fundamental note, this study also sets forth the need to treat gels, microspheres, and fluidic systems as fundamentally information-theoretic in nature, rather than continuum mechanical, a perspective emerging out from recent program by Tao to treat fluids as potentially Turing-complete and thus, programmable.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Particle-in-cell simulation of a 50~mTorr capacitively coupled argon discharge over a range of frequencies
Authors:
Saurabh Simha,
Sarveshwar Sharma,
Alexander Khrabrov,
Igor Kaganovich,
Jonathan Poggie,
Sergey Macheret
Abstract:
The effect of driving frequency in the range of 13.56 MHz to 73 MHz on electron energy distribution and electron heating modes in a 50 mTorr capacitively coupled argon plasma discharge is studied using 1D-3V particle-in-cell simulations. Calculated electron energy probability functions exhibit three distinct ``temperatures'' for low-, mid-, and high-energy electrons. When compared to published exp…
▽ More
The effect of driving frequency in the range of 13.56 MHz to 73 MHz on electron energy distribution and electron heating modes in a 50 mTorr capacitively coupled argon plasma discharge is studied using 1D-3V particle-in-cell simulations. Calculated electron energy probability functions exhibit three distinct ``temperatures'' for low-, mid-, and high-energy electrons. When compared to published experimental data, the calculated probability functions show a reasonable agreement for the energy range resolved in the measurements (about 2 eV to 10 eV). Discrepancies outside this range lead to differences between computational and experimental values of the electron number density determined from the distribution functions, but the predicted effective electron temperature is within 25\% of experimental values. The impedance of the discharge is interpreted in terms of a homogeneous equivalent circuit model and the driving frequency dependence of the inferred combined sheath thickness is found to obey a known, theoretically-derived, power law. The average power transferred from the field to the electrons (electron heating) is computed, and a region of negative heating near the sheath edge, particularly at higher driving frequencies, is identified. Analysis of the electron momentum equation shows that electron inertia, which would average to zero in a linear regime, is responsible for negative values of power deposition near the sheath edge at high driving frequencies due to the highly nonlinear behavior of the discharge.
△ Less
Submitted 8 June, 2023;
originally announced June 2023.
-
Direct Implicit and Explicit Energy-Conserving Particle-in-Cell Methods for Modeling of Capacitively-Coupled Plasma Devices
Authors:
Haomin Sun,
Soham Banerjee,
Sarveshwar Sharma,
Andrew Tasman Powis,
Alexander V. Khrabrov,
Dmytro Sydorenko,
Jian Chen,
Igor D. Kaganovich
Abstract:
Achieving large-scale kinetic modelling is a crucial task for the development and optimization of modern plasma devices. With the trend of decreasing pressure in applications such as plasma etching, kinetic simulations are necessary to self-consistently capture the particle dynamics. The standard, explicit, electrostatic, momentum-conserving Particle-In-Cell method suffers from restrictive stabili…
▽ More
Achieving large-scale kinetic modelling is a crucial task for the development and optimization of modern plasma devices. With the trend of decreasing pressure in applications such as plasma etching, kinetic simulations are necessary to self-consistently capture the particle dynamics. The standard, explicit, electrostatic, momentum-conserving Particle-In-Cell method suffers from restrictive stability constraints on spatial cell size and temporal time step, requiring resolution of the electron Debye length and electron plasma period respectively. This results in a very high computational cost, making the technique prohibitive for large volume device modeling. We investigate the Direct Implicit algorithm and the explicit Energy Conserving algorithm as alternatives to the standard approach, both of which can reduce computational cost with a minimal (or controllable) impact on results. These algorithms are implemented into the well-tested EDIPIC-2D and LTP-PIC codes, and their performance is evaluated via 2D capacitively coupled plasma discharge simulations. The investigation revels that both approaches enable the utilization of cell sizes larger than the Debye length, resulting in reduced runtime, while incurring only minor inaccuracies in plasma parameters. The Direct Implicit method also allows for time steps larger than the electron plasma period, however care must be taken to avoid numerical heating or cooling. It is demonstrated that by appropriately adjusting the ratio of cell size to time step, it is possible to mitigate this effect to an acceptable level.
△ Less
Submitted 31 August, 2023; v1 submitted 2 June, 2023;
originally announced June 2023.
-
Discharge characteristics of a low-pressure geometrically asymmetric cylindrical capacitively coupled plasma with an axisymmetric magnetic field
Authors:
Swati Dahiya,
Pawandeep Singh,
Yashashri Patil,
Sarveshwar Sharma,
Nishant Sirse,
Shantanu Kumar Karkari
Abstract:
We investigate the discharge characteristics of a low-pressure geometrically asymmetric cylindrical capacitively coupled plasma discharge with an axisymmetric magnetic field generating an EXB drift in the azimuthal direction. Vital discharge parameters, including electron density, electron temperature, DC self-bias, and Electron Energy distribution function (EEDF), are studied experimentally for v…
▽ More
We investigate the discharge characteristics of a low-pressure geometrically asymmetric cylindrical capacitively coupled plasma discharge with an axisymmetric magnetic field generating an EXB drift in the azimuthal direction. Vital discharge parameters, including electron density, electron temperature, DC self-bias, and Electron Energy distribution function (EEDF), are studied experimentally for varying magnetic field strength (B). A transition in the discharge asymmetry is observed along with a range of magnetic fields where the discharge is highly efficient with lower electron temperature. Outside this range of magnetic field, the plasma density drops, followed by an increase in the electron temperature. The observed behavior is attributed to the transition from geometrical asymmetry to magnetic field-associated symmetry due to reduced radial losses and plasma confinement in the peripheral region. In this region, the DC self-bias increases almost linearly from a large negative value to nearly zero, i.e., the discharge becomes symmetric. The EEDF undergoes a transition from bi-Maxwellian for unmagnetized to Maxwellian at intermediate B and finally becomes a weakly bi-Maxwellian at higher values of B. The above transitions present a novel way to independently control the ion energy and ion flux in a cylindrical CCP system using an axisymmetric magnetic field with an enhanced plasma density and lower electron temperature operation that is beneficial for plasma processing applications.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
A Finite-Difference Time-Domain approach for dispersive magnetic media
Authors:
Jasmin Graf,
Joshua Baxter,
Sanchar Sharma,
Silvia Viola Kusminskiy,
Lora Ramunno
Abstract:
We extend the Finite-Difference Time-Domain method to treat dispersive magnetic media by incorporating magneto-optical effects through a frequency-dependent permittivity tensor. For benchmarking our method, we consider the light scattering on a magnetic sphere in the Mie regime. We first derive the analytical scattering expressions which predict a peak broadening in the scattering efficiency due t…
▽ More
We extend the Finite-Difference Time-Domain method to treat dispersive magnetic media by incorporating magneto-optical effects through a frequency-dependent permittivity tensor. For benchmarking our method, we consider the light scattering on a magnetic sphere in the Mie regime. We first derive the analytical scattering expressions which predict a peak broadening in the scattering efficiency due to the atomic energy level splitting in the presence of a magnetic field, together with an additional rotated part in the scattered field profile due to the Faraday rotation. We show that our numerical method is able to capture the main scattering features and discuss its limitations and possible improvements in accuracy.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Shock induced atomisation of a liquid metal droplet
Authors:
Shubham Sharma,
Navin Kumar Chandra,
Aloke Kumar,
Saptarshi Basu
Abstract:
The present study uses Galinstan as a test fluid to investigate the shock-induced aerobreakup of a liquid metal droplet in a high Weber number regime (We ~ 400 - 8000). Atomization dynamics is examined for three test environments: oxidizing (Galinstan-air), inert (Galinstan-nitrogen), and conventional fluids (DI water-air). Due to the readily oxidizing nature of liquid metals, their atomization in…
▽ More
The present study uses Galinstan as a test fluid to investigate the shock-induced aerobreakup of a liquid metal droplet in a high Weber number regime (We ~ 400 - 8000). Atomization dynamics is examined for three test environments: oxidizing (Galinstan-air), inert (Galinstan-nitrogen), and conventional fluids (DI water-air). Due to the readily oxidizing nature of liquid metals, their atomization in an industrial scale system is generally carried in inert atmosphere conditions. However, no previous study has considered gas-induced secondary atomization of liquid metals in inert conditions. Due to experimental challenges associated with molten metals, laboratory scale models are generally tested for conventional fluids like DI water, liquid fuels, etc. The translation of results obtained from conventional fluid to liquid metal atomization is rarely explored. Here a direct multi-scale spatial and temporal comparison is provided between the atomization dynamics of conventional fluid and liquid metals under oxidizing and inert conditions. The liquid metal droplet undergoes breakup through Shear-Induced Entrainment (SIE) mode for the studied range of Weber number values. The prevailing mechanism is explained based on the relative dominance of droplet deformation and KH wave formation. The study provides quantitative and qualitative similarities for the three test cases and explains the differences in morphology of fragmenting secondary droplets in the oxidizing test case (Galinstan-air) due to rapid oxidation of the fragmenting ligaments. A phenomenological framework is postulated for predicting the morphology of secondary droplets. The formation of flake-like secondary droplets in the Galinstan air test case is based on the oxidation rate of liquid metals and the properties of the oxide layer formed on the atomizing ligament surface.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
Origin of filaments in finite-time in Newtonian and non-Newtonian thin-films
Authors:
Saksham Sharma,
D. Ian Wilson
Abstract:
The sticky fluids found in pitcher plant leaf vessels can leave fractal-like filaments behind when dewetting from a substrate. To understand the origin of these filaments, we investigate the dynamics of a retreating thin-film of aqueous polyethylene oxide (PEO) solutions which partially wet polydimethyl siloxane (PDMS) substrates. Under certain conditions the retreating film generates regularly-sp…
▽ More
The sticky fluids found in pitcher plant leaf vessels can leave fractal-like filaments behind when dewetting from a substrate. To understand the origin of these filaments, we investigate the dynamics of a retreating thin-film of aqueous polyethylene oxide (PEO) solutions which partially wet polydimethyl siloxane (PDMS) substrates. Under certain conditions the retreating film generates regularly-spaced liquid filaments. The early-stage thin-film dynamics of dewetting are investigated to identify a theoretical criterion for liquid filament formation. Starting with a linear stability analysis of a Newtonian or simple non-Newtonian (power-law) thin-film, a critical film thickness is identified which depends on the Hamaker constant for the fluid-substrate pair and the surface tension of the fluid. When the measured film thickness is smaller than this value, the film is unstable and forms filaments as a result of van der Waals forces dominating its behaviour. This critical film-height is compared with experimental measurements of film thickness obtained for receding films of Newtonian (glycerol-water mixtures) and non-Newtonian (PEO) solutions generated on substrates inclined at angles 0 $^{\circ}$, 30 $^{\circ}$, and 60 $^{\circ}$ to the vertical. The observations of filament and its absence show good agreement with the theory. The evolution of the thin-film shape is modelled numerically to show that the formation of filaments arises because the thin-film equation features a singular solution after a finite-time, hence termed a "finite-time singularity".
△ Less
Submitted 16 April, 2023;
originally announced April 2023.
-
Comparative studies of the sensitivities of sparse and full geometries of Total-Body PET scanners built from crystals and plastic scintillators
Authors:
Meysam Dadgar,
Szymon Parzych,
Jakub Baran,
Neha Chug,
Catalina Curceanu,
Eryk Czerwiński,
Kamil Dulski,
Kavya Elyan,
Aleksander Gajos,
Beatrix Hiesmayr,
Łukasz Kapłon,
Konrad Klimaszewski,
Paweł Konieczka,
Grzegorz Korcyl,
Tomasz Kozik,
Wojciech Krzemień,
Deepak Kumar,
Szymon Niedźwiecki,
Domonik Panek,
Eleną Perez del Rio,
Lech Raczyński,
Sushil Sharma,
Shivani,
Roman Shopa,
Magdalena Skurzok
, et al. (6 additional authors not shown)
Abstract:
Background: Total-Body imaging offers high sensitivity, single-bed position, and low dose, but high construction costs limit worldwide utilization. This study compares existing and developing tomographs using plastic scintillators via simulations to propose a cost-efficient Total-Body PET scanner.
Methods: Simulations of eight uEXPLORER tomographs with different scintillator materials, axial fie…
▽ More
Background: Total-Body imaging offers high sensitivity, single-bed position, and low dose, but high construction costs limit worldwide utilization. This study compares existing and developing tomographs using plastic scintillators via simulations to propose a cost-efficient Total-Body PET scanner.
Methods: Simulations of eight uEXPLORER tomographs with different scintillator materials, axial field-of-view, and detector configuration, and eight J-PET scanners with various field-of-view, plastic scintillator cross-sections, and layers were performed. Biograph Vision was also simulated. Two types of simulations were conducted with a central source and a water-filled phantom.
Results: BGO crystal-based scanners showed the best sensitivity (350 cps/kBq at the center). Sparse geometry or LYSO crystals reduced sensitivity. J-PET design showed similar sensitivity to sparse LYSO detectors, with full body coverage and additional gain for brain imaging.
Conclusion: The J-PET tomography system using plastic scintillators could be a cost-efficient alternative for Total-Body PET scanners, overcoming high construction costs while maintaining sensitivity
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
Controlled coalescence-induced droplet jumping on flexible superhydrophobic substrates
Authors:
Gopal Chandra Pal,
Siddharth SS,
Manish Agarwal,
Chander Shekhar Sharma
Abstract:
Sessile droplets coalescing on superhydrophobic substrates spontaneously jump from the surface. In this process, the excess surface energy available at the initiation of coalescence overcomes the minimal surface adhesion and manifests as sufficient kinetic energy to propel the droplets away from the substrate. Here, we show that the coalescence induced droplet jumping velocity is significantly cur…
▽ More
Sessile droplets coalescing on superhydrophobic substrates spontaneously jump from the surface. In this process, the excess surface energy available at the initiation of coalescence overcomes the minimal surface adhesion and manifests as sufficient kinetic energy to propel the droplets away from the substrate. Here, we show that the coalescence induced droplet jumping velocity is significantly curtailed if the superhydrophobic substrate is flexible in nature. Through detailed experimental measurements and numerical simulations, we demonstrate that the droplet jumping velocity and jumping height can be reduced by as much as 40 % and 64%, respectively, by synergistically tuning the substrate stiffness and substrate frequency. We show that this hitherto unexplored aspect of droplet coalescence jumping can be gainfully exploited in water harvesting from dew and fog harvesting. Additionally, through an exemplar butterfly wing substrate, we demonstrate that this effect is likely to manifest on many natural superhydrophobic substrates due to their inherent flexibility.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
A comparison of 7 Tesla MR spectroscopic imaging and 3 Tesla MR fingerprinting for tumor localization in glioma patients
Authors:
Philipp Lazen,
Pedro Lima Cardoso,
Sukrit Sharma,
Cornelius Cadrien,
Thomas Roetzer-Pejrimovsky,
Julia Furtner,
Bernhard Strasser,
Lukas Hingerl,
Alexandra Lipka,
Matthias Preusser,
Wolfgang Marik,
Wolfgang Bogner,
Georg Widhalm,
Karl Rössler,
Siegfried Trattnig,
Gilbert Hangel
Abstract:
This paper investigates the correlation between magnetic resonance spectroscopic imaging (MRSI) and magnetic resonance fingerprinting (MRF) in glioma patients by comparing neuro-oncological markers obtained from MRSI to T1/T2 maps from MRF.
Data from 12 consenting patients with gliomas were analyzed by defining hotspots for T1, T2 and various metabolic ratios, and comparing them using Sørensen-D…
▽ More
This paper investigates the correlation between magnetic resonance spectroscopic imaging (MRSI) and magnetic resonance fingerprinting (MRF) in glioma patients by comparing neuro-oncological markers obtained from MRSI to T1/T2 maps from MRF.
Data from 12 consenting patients with gliomas were analyzed by defining hotspots for T1, T2 and various metabolic ratios, and comparing them using Sørensen-Dice Similarity Coefficients (DSCs) and the distances between their centers of intensity (COIDs).
Median DSCs between MRF and the tumor segmentation were 0.73 (T1) and 0.79 (T2). The DSCs between MRSI and MRF were highest for Gln/tNAA (T1: 0.75, T2: 0.80, tumor: 0.78), followed by Gly/tNAA (T1: 0.57, T2: 0.62, tumor: 0.54) and tCho/tNAA (T1: 0.61, T2: 0.58, tumor: 0.45). The median values in the tumor hotspot were T1=1724 ms, T2=86 ms, Gln/tNAA=0.61, Gly/tNAA=0.28, Ins/tNAA=1.15, and tCho/tNAA=0.48, and, in the peritumoral region, were T1=1756 ms, T2=102ms, Gln/tNAA=0.38, Gly/tNAA=0.20, Ins/tNAA=1.06, and tCho/tNAA=0.38, and, in the NAWM, were T1=950 ms, T2=43 ms, Gln/tNAA=0.16, Gly/tNAA=0.07, Ins/tNAA=0.54, and tCho/tNAA=0.20.
The results of this study constitute the first comparison of 7T MRSI and 3T MRF, showing a good correspondence between these methods.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Simple experimental realization of optical Hilbert Hotel using scalar and vector fractional vortex beams
Authors:
Subith Kumar,
Anirban Ghosh,
Chahat Kaushik,
Arash Shiri,
Greg Gbur,
Sudhir Sharma,
G. K. Samanta
Abstract:
Historically, infinity was long considered a vague concept - boundless, endless, larger than the largest - without any quantifiable mathematical foundation. This view changed in the 1800s through the pioneering work of Georg Cantor showing that infinite sets follow their own seemingly paradoxical mathematical rules. In 1924, David Hilbert highlighted the strangeness of infinity through a thought e…
▽ More
Historically, infinity was long considered a vague concept - boundless, endless, larger than the largest - without any quantifiable mathematical foundation. This view changed in the 1800s through the pioneering work of Georg Cantor showing that infinite sets follow their own seemingly paradoxical mathematical rules. In 1924, David Hilbert highlighted the strangeness of infinity through a thought experiment now referred to as the Hilbert Hotel paradox, or simply Hilbert's Hotel. The paradox describes an "fully" occupied imaginary hotel having infinite number of single-occupancy rooms, the manager can always find a room for new guest by simply shifting current guests to the next highest room, leaving first room vacant. The investigation of wavefield singularities has uncovered the existence of a direct optical analogy to Hilbert's thought experiment. Since then, efforts have been made to investigate the properties of Hilbert's Hotel by controlling the dynamics of phase singularities in``fractional'' order optical vortex beams. Here, we have taken such proposals to the next level and experimentally demonstrated Hilbert's Hotel using both phase and polarization singularities of optical fields. Using a multi-ramped spiral-phase-plate and a supercontinuum source, we generated and controlled fractional order vortex beams for the practical implementation of Hilbert's Hotel in scalar and vector vortex beams. Using a multi-ramped spiral-phase-plate, we show the possibility for complicated transitions of the generalized Hilbert's Hotel. The generic experimental scheme illustrates the usefulness of structured beams in visualizing unusual mathematical concepts and also for fractional vector beams driven fundamental and applied research.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
Feasibility of the J-PET to monitor range of therapeutic proton beams
Authors:
Jakub Baran,
Damian Borys,
Karol Brzeziński,
Jan Gajewski,
Michał Silarski,
Neha Chug,
Aurélien Coussat,
Eryk Czerwiński,
Meysam Dadgar,
Kamil Dulski,
Kavya V. Eliyan,
Aleksander Gajos Krzysztof Kacprzak,
Łukasz Kapłon,
Konrad Klimaszewski,
Paweł Konieczka,
Renata Kopeć,
Grzegorz Korcyl,
Tomasz Kozik,
Wojciech Krzemień,
Deepak Kumar,
Antony J. Lomax,
Keegan McNamara,
Szymon Niedźwiecki,
Paweł Olko,
Dominik Panek
, et al. (18 additional authors not shown)
Abstract:
Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated prot…
▽ More
Objective: The aim of this work is to investigate the feasibility of the Jagiellonian Positron Emission Tomography (J-PET) scanner for intra-treatment proton beam range monitoring. Approach: The Monte Carlo simulation studies with GATE and PET image reconstruction with CASToR were performed in order to compare six J-PET scanner geometries (three dual-heads and three cylindrical). We simulated proton irradiation of a PMMA phantom with a Single Pencil Beam (SPB) and Spread-Out Bragg Peak (SOBP) of various ranges. The sensitivity and precision of each scanner were calculated, and considering the setup's cost-effectiveness, we indicated potentially optimal geometries for the J-PET scanner prototype dedicated to the proton beam range assessment. Main results: The investigations indicate that the double-layer cylindrical and triple-layer double-head configurations are the most promising for clinical application. We found that the scanner sensitivity is of the order of 10$^{-5}$ coincidences per primary proton, while the precision of the range assessment for both SPB and SOBP irradiation plans was found below 1 mm. Among the scanners with the same number of detector modules, the best results are found for the triple-layer dual-head geometry. Significance: We performed simulation studies demonstrating that the feasibility of the J-PET detector for PET-based proton beam therapy range monitoring is possible with reasonable sensitivity and precision enabling its pre-clinical tests in the clinical proton therapy environment. Considering the sensitivity, precision and cost-effectiveness, the double-layer cylindrical and triple-layer dual-head J-PET geometry configurations seem promising for the future clinical application. Experimental tests are needed to confirm these findings.
△ Less
Submitted 28 February, 2023;
originally announced February 2023.