Showing 1–15 of 15 results for author: Scott, E

Spectroscopic measurements and models of energy deposition in the substrate of quantum circuits by natural ionizing radiation

Authors: Joseph W. Fowler, Paul Szypryt, Raymond Bunker, Ellen R. Edwards, Ian Fogarty Florang, Jiansong Gao, Andrea Giachero, Shannon F. Hoogerheide, Ben Loer, H. Pieter Mumm, Nathan Nakamura, Galen C. O'Neil, John L. Orrell, Elizabeth M. Scott, Jason Stevens, Daniel S. Swetz, Brent A. VanDevender, Michael Vissers, Joel N. Ullom

Abstract: Naturally occurring background radiation is a source of correlated decoherence events in superconducting qubits that will challenge error-correction schemes. To characterize the radiation environment in an unshielded laboratory, we performed broadband, spectroscopic measurements of background events in silicon substrates located inside a millikelvin refrigerator, an environment representative of s… ▽ More Naturally occurring background radiation is a source of correlated decoherence events in superconducting qubits that will challenge error-correction schemes. To characterize the radiation environment in an unshielded laboratory, we performed broadband, spectroscopic measurements of background events in silicon substrates located inside a millikelvin refrigerator, an environment representative of superconducting qubit systems. We measured the background spectra in silicon substrates of two thicknesses, 0.5 mm and 1.5 mm, and obtained the average event rate and the integrated power deposition. In a 25 mm^2 area and the thinner substrate, these values are 0.023 events per second and 4.9 keV/s, counting events that deposit at least 40 keV. We find the background spectrum to be nearly featureless. Its intensity decreases by a factor of 40,000 between 100 keV and 3 MeV for silicon substrates 0.5 mm thick. We find the cryogenic measurements to be in good agreement with predictions based on measurements of the terrestrial gamma-ray flux, published models of cosmic-ray fluxes, a crude model of the cryostat, and radiation-transport simulations. No free parameters are required to predict the background spectra in the silicon substrates. The good agreement between measurements and predictions allow assessment of the relative contributions of terrestrial and cosmic background sources and their dependence on substrate thickness. Our spectroscopic measurements are performed with superconducting microresonators that transduce deposited energy to a readily detectable electrical signal. We find that gamma-ray emissions from radioisotopes are responsible for the majority of events depositing E<1.5 MeV, while nucleons among the cosmic-ray secondary particles cause most events that deposit more energy. These results suggest several paths to reducing the impact of background radiation on quantum circuits. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Assessing your Observatory's Impact: Best Practices in Establishing and Maintaining Observatory Bibliographies

Authors: Observatory Bibliographers Collaboration, Raffaele D'Abrusco, Monique Gomez, Uta Grothkopf, Sharon Hunt, Ruth Kneale, Mika Konuma, Jenny Novacescu, Luisa Rebull, Elena Scire, Erin Scott, Donna Thompson, Lance Utley, Christopher Wilkinson, Sherry Winkelman

Abstract: Observatories need to measure and evaluate the scientific output and overall impact of their facilities. An observatory bibliography consists of the papers published using that observatory's data, typically gathered by searching the major journals for relevant keywords. Recently, the volume of literature and methods by which the publications pool is evaluated has increased. Efficient and standardi… ▽ More Observatories need to measure and evaluate the scientific output and overall impact of their facilities. An observatory bibliography consists of the papers published using that observatory's data, typically gathered by searching the major journals for relevant keywords. Recently, the volume of literature and methods by which the publications pool is evaluated has increased. Efficient and standardized procedures are necessary to assign meaningful metadata; enable user-friendly retrieval; and provide the opportunity to derive reports, statistics, and visualizations to impart a deeper understanding of the research output. In 2021, a group of observatory bibliographers from around the world convened online to continue the discussions presented in Lagerstrom (2015). We worked to extract general guidelines from our experiences, techniques, and lessons learnt. The paper explores the development, application, and current status of telescope bibliographies and future trends. This paper briefly describes the methodologies employed in constructing databases, along with the various bibliometric techniques used to analyze and interpret them. We explain reasons for non-standardization and why it is essential for each observatory to identify metadata and metrics that are meaningful for them; caution the (over-)use of comparisons among facilities that are, ultimately, not comparable through bibliometrics; and highlight the benefits of telescope bibliographies, both for researchers within the astronomical community and for stakeholders beyond the specific observatories. There is tremendous diversity in the ways bibliographers track publications and maintain databases, due to parameters such as resources, type of observatory, historical practices, and reporting requirements to funders and outside agencies. However, there are also common sets of Best Practices. △ Less

Submitted 28 July, 2024; v1 submitted 29 December, 2023; originally announced January 2024.

Comments: 20 pages, 3 appendices

Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in crystals

Authors: Md Shafkat Bin Hoque, Eric R. Hoglund, Boyang Zhao, De-Liang Bao, Hao Zhou, Sandip Thakur, Eric Osei-Agyemang, Khalid Hattar, Ethan A. Scott, Mythili Surendran, John A. Tomko, John T. Gaskins, Kiumars Aryana, Sara Makarem, Ganesh Balasubramanian, Ashutosh Giri, Tianli Feng, Jordan A. Hachtel, Jayakanth Ravichandran, Sokrates T. Pantelides, Patrick E. Hopkins

Abstract: Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded… ▽ More Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded materials in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline, BaZrS3-derived, Ruddlesden-Popper phases Ban+1ZrnS3n+1, n = 2, 3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of "mechanically stiff phonon glasses". △ Less

Submitted 5 December, 2023; originally announced December 2023.

Imaging exciton-polariton transport in MoSe2 waveguides

Authors: Fengrui Hu, Yilong Luan, M. E. Scott, Jiaqiang Yan, D. G. Mandrus, Xiaodong Xu, Z Fei

Abstract: The exciton polariton (EP), a half-light and half-matter quasiparticle, is potentially an important element for future photonic and quantum technologies. It provides both strong light-matter interactions and long-distance propagation that is necessary for applications associated with energy or information transfer. Recently, strongly-coupled cavity EPs at room temperature have been demonstrated in… ▽ More The exciton polariton (EP), a half-light and half-matter quasiparticle, is potentially an important element for future photonic and quantum technologies. It provides both strong light-matter interactions and long-distance propagation that is necessary for applications associated with energy or information transfer. Recently, strongly-coupled cavity EPs at room temperature have been demonstrated in van der Waals (vdW) materials due to their strongly-bound excitons. Here we report a nano-optical imaging study of waveguide EPs in MoSe2, a prototypical vdW semiconductor. The measured propagation length of the EPs is sensitive to the excitation photon energy and reaches over 12 μm. The polariton wavelength can be conveniently altered from 600 nm down to 300 nm by controlling the waveguide thickness. Furthermore, we found an intriguing mode back-bending dispersion close to the exciton resonance. The observed EPs in vdW semiconductors could be useful in future nanophotonic circuits operating in the near-infrared to visible spectral regions. △ Less

Submitted 26 January, 2023; originally announced January 2023.

Comments: 21 pages

Journal ref: Nature Photonics 11, 356-360 (2017)

Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, J. P. Figueiredo de sa Sousa de Almeida, P. G. Dias de Almeida, A. Alpana, M. Alyari, I. Andreev, U. Aras, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Banerjee, P. DeBarbaro, P. Bargassa, D. Barney, F. Beaudette , et al. (435 additional authors not shown)

Abstract: The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med… ▽ More The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data. △ Less

Submitted 27 May, 2023; v1 submitted 9 November, 2022; originally announced November 2022.

Comments: Accepted for publication by JINST

Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, F. Alam Khan, M. Alhusseini, J. Alison, A. Alpana, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, P. Aspell, I. O. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, S. Bannerjee, P. Bargassa, D. Barney, F. Beaudette , et al. (364 additional authors not shown)

Abstract: The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu… ▽ More The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation. △ Less

Submitted 31 March, 2022; v1 submitted 12 November, 2021; originally announced November 2021.

Quantification of systematic errors in the electron density and temperature measured with Thomson scattering at W7-X

Authors: Philipp Nelde, Golo Fuchert, Ekkehard Pasch, Marc N. A. Beurskens, Sergey A. Bozhenkov, Kai Jakob Brunner, Udo Höfel, Sehyun Kwak, Jens Meineke, Evan R. Scott, Robert C. Wolf, W7-X team

Abstract: The electron density and temperature profiles measured with Thomson scattering at the stellarator Wendelstein 7-X show features which seem to be unphysical, but so far could not be associated with any source of error considered in the data processing. A detailed Bayesian analysis reveals that errors in the spectral calibration cannot explain the features observed in the profiles. Rather, it seems… ▽ More The electron density and temperature profiles measured with Thomson scattering at the stellarator Wendelstein 7-X show features which seem to be unphysical, but so far could not be associated with any source of error considered in the data processing. A detailed Bayesian analysis reveals that errors in the spectral calibration cannot explain the features observed in the profiles. Rather, it seems that small fluctuations in the laser position are sufficient to affect the profile substantially. The impact of these fluctuations depends on the laser position itself, which, in turn, provides a method to find the optimum laser alignment in the future. △ Less

Submitted 9 August, 2023; v1 submitted 5 November, 2021; originally announced November 2021.

Construction and commissioning of CMS CE prototype silicon modules

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul… ▽ More As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: 35 pages, submitted to JINST

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

Authors: B. Acar, G. Adamov, C. Adloff, S. Afanasiev, N. Akchurin, B. Akgün, M. Alhusseini, J. Alison, G. Altopp, M. Alyari, S. An, S. Anagul, I. Andreev, M. Andrews, P. Aspell, I. A. Atakisi, O. Bach, A. Baden, G. Bakas, A. Bakshi, P. Bargassa, D. Barney, E. Becheva, P. Behera, A. Belloni , et al. (307 additional authors not shown)

Abstract: The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca… ▽ More The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers. △ Less

Submitted 8 December, 2020; v1 submitted 7 December, 2020; originally announced December 2020.

Suppression of core turbulence by profile shaping in Wendelstein 7-X

Authors: A. v. Stechow, O. Grulke, Th. Wegner, J. H. E. Proll, J. A. Alcusón, H. M. Smith, J. Baldzuhn, C. D. Beidler, M. N. A. Beurskens, S. A. Bozhenkov, E. Edlund, B. Geiger, Z. Huang, O. P. Ford, G. Fuchert, A. Langenberg, N. Pablant, E. Pasch, M. Porkolab, K. Rahbarnia, J. Schilling, E. R. Scott, H. Thomsen, L. Vanó, G. Weir , et al. (1 additional authors not shown)

Abstract: In the Wendelstein 7-X magnetic confinement experiment, a reduction of turbulent density fluctuations as well as anomalous impurity diffusion is associated with a peaking of the plasma density profile. These effects correlate with improved confinement and appear largely due to a reduction of anomalous transport as the change in neoclassical transport is small. The observed decrease of turbulent he… ▽ More In the Wendelstein 7-X magnetic confinement experiment, a reduction of turbulent density fluctuations as well as anomalous impurity diffusion is associated with a peaking of the plasma density profile. These effects correlate with improved confinement and appear largely due to a reduction of anomalous transport as the change in neoclassical transport is small. The observed decrease of turbulent heat flux with increased density gradients is in agreement with nonlinear gyrokinetic simulations, and has been attributed to the unique geometry of W7-X that limits the severity of trapped electron modes. △ Less

Submitted 5 October, 2020; originally announced October 2020.

The n$^3$He Experiment: Parity Violation in Polarized Neutron Capture on $^{3}$He

Authors: n3He Collaboration, M. McCrea, M. L. Kabir, N. Birge, C. E. Coppola, C. Hayes, E. Plemons, A. Ramírez-Morales, E. M. Scott, J. Watts, S. Baessler, L. Barrón-Palos, J. D. Bowman, C. Britton Jr., J. Calarco, V. Cianciolo, C. B. Crawford, D. Ezell, N. Fomin, I. Garishvili, M. T. Gericke, G. L. Greene, G. M. Hale, J. Hamblen, E. Iverson , et al. (4 additional authors not shown)

Abstract: Significant progress has been made to experimentally determine a complete set of the parity-violating (PV) weak-interaction amplitudes between nucleons. In this paper we describe the design, construction and operation of the n$^3$He experiment that was used to measure the PV asymmetry $A_{\mathrm{PV}}$ in the direction of proton emission in the reaction… ▽ More Significant progress has been made to experimentally determine a complete set of the parity-violating (PV) weak-interaction amplitudes between nucleons. In this paper we describe the design, construction and operation of the n$^3$He experiment that was used to measure the PV asymmetry $A_{\mathrm{PV}}$ in the direction of proton emission in the reaction $\vec{\mathrm{n}} + {^3}\mathrm{He} \rightarrow {^3}\mathrm{H} + \mathrm{p}$, using the capture of polarized cold neutrons in an unpolarized gaseous $^3\mathrm{He}$ target. This asymmetry has was recently calculated \cite{Viviani,Viviani2}, both in the traditional style meson exchange picture, and in effective field theory (EFT), including two-pion exchange. The high precision result (published separately) obtained with the experiment described herein forms an important benchmark for hadronic PV (HPV) theory in few-body systems, where precise calculations are possible. To this day, HPV is still one of the most poorly understood aspects of the electro-weak theory. The calculations estimate the size of the asymmetry to be in the range of $(-9.4 \rightarrow 3.5)\times 10^{-8}$, depending on the framework or model. The small size of the asymmetry and the small overall goal uncertainty of the experiment of $δA_{\mathrm{PV}} \simeq 1\times10^{-8}$ places strict requirements on the experiment, especially on the design of the target-detector chamber. In this paper we describe the experimental setup and the measurement methodology as well as the detailed design of the chamber, including results of Garfield++ and Geant4 simulations that form the basis of the chamber design and analysis. We also show data from commissioning and production and define the systematic errors that the chamber contributes to the measured $A_{\mathrm{PV}}$. We give the final uncertainty on the measurement. △ Less

Submitted 22 April, 2020; originally announced April 2020.

First Results from an Event Synchronized -- High Repetition Thomson Scattering System at Wendelstein 7-X

Authors: Hannes Damm, Ekkehard Pasch, Andreas Dinklage, Jürgen Baldzuhn, Sergey Bozhenkov, Kai Jakob Brunner, Florian Effenberg, Golo Fuchert, Joachim Geiger, Jeffrey Harris, Jens Knauer, Petra Kornejew, Thierry Kremeyer, Maciej Krychowiak, Jonathan Schilling, Oliver Schmitz, Evan Scott, Victoria Winters, the Wendelstein 7-X Team

Abstract: The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements p… ▽ More The Wendelstein 7-X (W7-X) Thomson scattering (TS) diagnostic was upgraded to transiently achieve kilohertz sampling rates combined with adjustable measuring times. The existing Nd:YAG lasers are employed to repetitively emit "bursts", i.e. multiple laser pulses in a short time interval. Appropriately timing burst in the three available lasers, up to twelve evenly spaced consecutive measurements per burst are possible. The pulse-to-pulse increment within a burst can be tuned from 2 ms to 33.3 ms (500 kHz - 30 Hz). Additionally, an event trigger system was developed to synchronize the burst Thomson scattering measurements to plasma events. Exemplary, a case of fast electron density and temperature evolution after cryogenic H2 pellet injection is presented in order to demonstrate the capabilities of the method. △ Less

Submitted 13 August, 2019; v1 submitted 30 June, 2019; originally announced July 2019.

Comments: 11 pages, 5 figures, To be published as proceeding to the 3rd European Conference on Plasma Diagnostics 2019 in Lisbon in the Proceedings Section of the Journal of Instrumentation (JINST)

A scalable Controlled NOT gate for linear optical computing using microring resonators

Authors: Ryan E. Scott, Paul M. Alsing, A. Matthew Smith, Michael L. Fanto, Christopher C. Tison, James Schneeloch, Edwin E. Hach, III

Abstract: We propose a scalable version of a KLM CNOT gate based upon integrated waveguide microring resonators (MRR), vs the original KLM-approach using beam splitters (BS). The core element of our CNOT gate is a nonlinear phase-shift gate (NLPSG) using three MRRs, which we examine in detail. We find an expanded parameter space for the NLPSG over that of the conventional version. Whereas in all prior propo… ▽ More We propose a scalable version of a KLM CNOT gate based upon integrated waveguide microring resonators (MRR), vs the original KLM-approach using beam splitters (BS). The core element of our CNOT gate is a nonlinear phase-shift gate (NLPSG) using three MRRs, which we examine in detail. We find an expanded parameter space for the NLPSG over that of the conventional version. Whereas in all prior proposals for bulk optical realizations of the NLPSG the optimal operating point is precisely a single zero dimensional manifold within the parameter space of the device, we find conditions for effective transmission amplitudes which define a set of one dimensional manifolds in the parameters spaces of the MRRs. This allows for an unprecedented level flexibility in operation of the NLPSG that and allows for the fabrication of tunable MRR-based devices with high precision and low loss. △ Less

Submitted 3 April, 2019; originally announced April 2019.

Comments: 20 pages, 5 figures, includes supplemental material

Journal ref: Phys. Rev. A 100, 022322 (2019)

Ore deposit exploration, geophysics and cutoff grade

Authors: Mary White, Linda Parker, David Watson, Charles Gray, Richard Cooper, Karen Lewis, Edwards Scott, Chelsea Sun

Abstract: Geophysics testing has always been the most available and affordable information for large scale mineral exploration. This paper uses the geophysics conditions of recent mines to build a model on ore locations. The model will also provide information for cutoff grid. Geophysics testing has always been the most available and affordable information for large scale mineral exploration. This paper uses the geophysics conditions of recent mines to build a model on ore locations. The model will also provide information for cutoff grid. △ Less

Submitted 11 June, 2018; v1 submitted 6 June, 2018; originally announced June 2018.

Comments: data may not be accurate, further investigation needed

Journal ref: Mineral Exploration, 2018

Temporal Feedback Control of High-Intensity Laser Pulses to Optimize Ultrafast Heating of Atomic Clusters

Authors: M. J. V. Streeter, S. J. D. Dann, J. D. E. Scott, C. D. Baird, C. D. Murphy, S. Eardley, R. A. Smith, S. Rozario, J. -N. Gruse, S. P. D. Mangles, Z. Najmudin, S. Tata, M. Krishnamurthy, S. V. Rahul, D. Hazra, P. Pourmoussavi, J. Hah, N. Bourgeois, C. Thornton, C. D. Gregory, C. J. Hooker, O. Chekhlov, S. J. Hawkes, B. Parry, V. A. Marshall , et al. (5 additional authors not shown)

Abstract: We describe how active feedback routines can be applied at limited repetition rate (5 Hz) to optimize high-power $>10$ TW) laser interactions with clustered gases. Optimization of x-ray production from an argon cluster jet, using a genetic algorithm, approximately doubled the measured energy through temporal modification of the 150 mJ driving laser pulse. This approach achieved an increased radiat… ▽ More We describe how active feedback routines can be applied at limited repetition rate (5 Hz) to optimize high-power $>10$ TW) laser interactions with clustered gases. Optimization of x-ray production from an argon cluster jet, using a genetic algorithm, approximately doubled the measured energy through temporal modification of the 150 mJ driving laser pulse. This approach achieved an increased radiation yield through exploration of a multi-dimensional parameter space, without requiring detailed a priori knowledge of the complex cluster dynamics. The optimized laser pulses exhibited a slow rising edge to the intensity profile, which enhanced the laser energy coupling into the cluster medium, compared to the optimally compressed FWHM pulse (40 fs). Our work suggests that this technique can be more widely utilized for control of intense pulsed secondary radiation from petawatt-class laser systems. △ Less

Submitted 21 June, 2018; v1 submitted 20 April, 2018; originally announced April 2018.

Comments: 5 pages, 3 figures, Published in APL

Journal ref: Appl. Phys. Lett. 112, 244101 (2018)