-
Multi-scale interactions in turbulent mixed convection drive efficient transport of Lagrangian particles
Authors:
Andrew P. Grace,
David H. Richter
Abstract:
When turbulent convection interacts with a turbulent shear flow, the cores of convective cells become aligned with the mean current, and these cells (which span the height of the domain) may interact with motions closer to the solid boundary. In this work, we use coupled Eulerian-Lagrangian direct numerical simulations of a turbulent channel flow to demonstrate that under conditions of turbulent m…
▽ More
When turbulent convection interacts with a turbulent shear flow, the cores of convective cells become aligned with the mean current, and these cells (which span the height of the domain) may interact with motions closer to the solid boundary. In this work, we use coupled Eulerian-Lagrangian direct numerical simulations of a turbulent channel flow to demonstrate that under conditions of turbulent mixed convection, interactions between motions associated with ejections and low-speed streaks near the solid boundary, and coherent superstructures in the interior of the flow interact and lead to significant vertical transport of strongly settling Lagrangian particles. We show that the primary suspension mechanism is associated with strong ejection events (canonical low-speed streaks and hairpin vortices characterized by $u'<0$ and $w'>0$), whereas secondary suspension is strongly associated with large scale plume structures aligned with the mean shear (characterized by $w'>0$ and $θ'>0$). This coupling, which is absent in the limiting cases (pure channel flow or free convection) is shown to lead to a sudden increase in the interior concentration profiles as $\mathrm{Ri}_τ$ increases, resulting in concentrations that are larger by roughly an order of magnitude at the channel midplane.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
Effects of settling on inertial particle slip velocity statistics in wall bounded flows
Authors:
Andrew P. Grace,
David Richter,
Tim Berk,
Andrew D. Bragg
Abstract:
Developing reduced order models for the transport of solid particles in turbulence typically requires a statistical description of the particle-turbulence interactions. In this work, we utilize a statistical framework to derive continuum equations for the moments of the slip velocity of inertial settling Lagrangian particles in a turbulent boundary layer. Using coupled Eulerian-Lagrangian direct n…
▽ More
Developing reduced order models for the transport of solid particles in turbulence typically requires a statistical description of the particle-turbulence interactions. In this work, we utilize a statistical framework to derive continuum equations for the moments of the slip velocity of inertial settling Lagrangian particles in a turbulent boundary layer. Using coupled Eulerian-Lagrangian direct numerical simulations, we then identify the dominant mechanisms controlling the slip velocity variance, and find that for a range of St+, Sv+, and Re, the slip variance is primarily controlled by local differences between the "seen" variance and the particle velocity variance, while terms appearing due to the inhomogeneity of the turbulence are sub-leading until Sv+ becomes large. We also consider several comparative metrics to assess the relative magnitudes of the fluctuating slip velocity and the mean slip velocity, and we find that the vertical mean slip increases rapidly with Sv+, rendering the variance relatively small -- an effect found to be most substantial for Sv+>1. Finally, we compare the results to a model of the acceleration variance Berk and Coletti (2021) based the concept of a response function described in Csanady (1963), highlighting the role of the crossing trajectories mechanism. We find that while there is good agreement for low Sv+, systematic errors remain, possibly due to implicit non-local effects arising from rapid particle settling and inhomogeneous turbulence. We conclude with a discussion of the implications of this work for modeling the transport of coarse dust grains in the atmospheric surface layer.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Physics-Informed Priors with Application to Boundary Layer Velocity
Authors:
Luca Menicali,
David H. Richter,
Stefano Castruccio
Abstract:
One of the most popular recent areas of machine learning predicates the use of neural networks augmented by information about the underlying process in the form of Partial Differential Equations (PDEs). These physics-informed neural networks are obtained by penalizing the inference with a PDE, and have been cast as a minimization problem currently lacking a formal approach to quantify the uncertai…
▽ More
One of the most popular recent areas of machine learning predicates the use of neural networks augmented by information about the underlying process in the form of Partial Differential Equations (PDEs). These physics-informed neural networks are obtained by penalizing the inference with a PDE, and have been cast as a minimization problem currently lacking a formal approach to quantify the uncertainty. In this work, we propose a novel model-based framework which regards the PDE as a prior information of a deep Bayesian neural network. The prior is calibrated without data to resemble the PDE solution in the prior mean, while our degree in confidence on the PDE with respect to the data is expressed in terms of the prior variance. The information embedded in the PDE is then propagated to the posterior yielding physics-informed forecasts with uncertainty quantification. We apply our approach to a simulated viscous fluid and to experimentally-obtained turbulent boundary layer velocity in a water tunnel using an appropriately simplified Navier-Stokes equation. Our approach requires very few observations to produce physically-consistent forecasts as opposed to non-physical forecasts stemming from non-informed priors, thereby allowing forecasting complex systems where some amount of data as well as some contextual knowledge is available.
△ Less
Submitted 18 July, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
A Physics-Informed, Deep Double Reservoir Network for Forecasting Boundary Layer Velocity
Authors:
Matthew Bonas,
David H. Richter,
Stefano Castruccio
Abstract:
When a fluid flows over a solid surface, it creates a thin boundary layer where the flow velocity is influenced by the surface through viscosity, and can transition from laminar to turbulent at sufficiently high speeds. Understanding and forecasting the fluid dynamics under these conditions is one of the most challenging scientific problems in fluid dynamics. It is therefore of high interest to fo…
▽ More
When a fluid flows over a solid surface, it creates a thin boundary layer where the flow velocity is influenced by the surface through viscosity, and can transition from laminar to turbulent at sufficiently high speeds. Understanding and forecasting the fluid dynamics under these conditions is one of the most challenging scientific problems in fluid dynamics. It is therefore of high interest to formulate models able to capture the nonlinear spatio-temporal velocity structure as well as produce forecasts in a computationally efficient manner. Traditional statistical approaches are limited in their ability to produce timely forecasts of complex, nonlinear spatio-temporal structures which are at the same time able to incorporate the underlying flow physics. In this work, we propose a model to accurately forecast boundary layer velocities with a deep double reservoir computing network which is capable of capturing the complex, nonlinear dynamics of the boundary layer while at the same time incorporating physical constraints via a penalty obtained by a Partial Differential Equation (PDE). Simulation studies on a one-dimensional viscous fluid demonstrate how the proposed model is able to produce accurate forecasts while simultaneously accounting for energy loss. The application focuses on boundary layer data on a water tunnel with a PDE penalty derived from an appropriate simplification of the Navier-Stokes equations, showing forecasts improved by 33.7% and 80.0% in terms of mass conservation and variability of velocity fluctuation, respectfully, against non physics-informed methods.
△ Less
Submitted 21 May, 2024; v1 submitted 9 November, 2023;
originally announced November 2023.
-
Comparing phase-space and phenomenological modeling approaches for Lagrangian particles settling in a turbulent boundary layer
Authors:
Andrew P. Grace,
David H. Richter,
Andrew D. Bragg
Abstract:
Under the right circumstances, inertial particles (such as sand or dust) settling through the atmospheric boundary layer can experience a net enhancement in their average settling velocity due to their inertia. Since this enhancement arises due to their interactions with the surrounding turbulence it must be modelled at coarse scales. Models for the enhanced settling velocity (or deposition) of th…
▽ More
Under the right circumstances, inertial particles (such as sand or dust) settling through the atmospheric boundary layer can experience a net enhancement in their average settling velocity due to their inertia. Since this enhancement arises due to their interactions with the surrounding turbulence it must be modelled at coarse scales. Models for the enhanced settling velocity (or deposition) of the dispersed phase that find practical use in mesoscale weather models are often ad hoc or are built on phenomenological closure assumptions, meaning that the general deposition rate of particle is a key uncertainty. Instead of taking a phenomenological approach, exact phase space methods can be used to model the physical mechanisms responsible for the enhanced settling, and a more general parameterization of the enhanced settling of inertial particles can be built. In this work, we use direct numerical simulations (DNS) and phase space methods to evaluate the efficacy of phenomenological modelling approaches for the enhanced settling velocity of inertial particles with varying friction Stokes numbers and settling velocity parameters. We use the DNS data to estimate profiles of a drift-diffusion based parameterization of the fluid velocity sampled by the particles, which is key for determining the settling velocity behaviour of particles with low to moderate Stokes number. We find that by increasing the settling velocity parameter at moderate friction Stokes number, the magnitude of preferential sweeping is modified, and this behaviour is explained by the drift component. We then use these profiles to argue that the eddy-diffusivity-like closure used in phenomenological models is incomplete, relying on inadequate empirical corrections. Finally, we discuss opportunities for reconciling exact phase space approaches with simpler phenomenological approaches for use in coarse-scale weather models.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
Compact Chirped Fiber Bragg Gratings for Single-Photon Generation from Quantum Dots
Authors:
Vikas Remesh,
Ria G. Krämer,
René Schwarz,
Florian Kappe,
Yusuf Karli,
Malte Per Siems,
Thomas K. Bracht,
Saimon Filipe Covre da Silva,
Armando Rastelli,
Doris E. Reiter,
Daniel Richter,
Stefan Nolte,
Gregor Weihs
Abstract:
A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context, due to their excellent photophysical properties. Spectral variability of quantum dots is commonly rega…
▽ More
A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context, due to their excellent photophysical properties. Spectral variability of quantum dots is commonly regarded as a drawback introduced by the fabrication method. However, this is beneficial to realize a frequency-multiplexed single-photon platform. Chirped pulse excitation, relying on the so-called adiabatic rapid passage, is the most efficient scheme to excite a quantum dot ensemble due to its immunity to individual quantum dot parameters. Yet, the existing methods of generating chirped laser pulses to excite a quantum emitter are bulky, lossy, and mechanically unstable, which severely hampers the prospects of a quantum dot photon source. Here, we present a compact, robust, and high-efficiency alternative for chirped pulse excitation of solid-state quantum emitters. Our simple plug-and-play module consists of chirped fiber Bragg gratings (CFBGs), fabricated via femtosecond inscription, to provide high values of dispersion in the near-infrared spectral range, where the quantum dots emit. We characterize and benchmark the performance of our method via chirped excitation of a GaAs quantum dot, establishing high-fidelity single-photon generation. Our highly versatile chirping module coupled to a photon source is a significant milestone toward realizing practical quantum photonic devices.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
From coffee stains to uniform deposits: significance of the contact-line mobility
Authors:
Aleksander Matavž,
Urša Uršič,
Jaka Močivnik,
Dmitry Richter,
Matjaž Humar,
Simon Čopar,
Barbara Malič,
Vid Bobnar
Abstract:
Hypothesis: Contact-line motion upon drying of sessile droplet strongly affects the solute transport and solvent evaporation profile. Hence, it should have a strong impact on the deposit formation and might be responsible for volcano-like, dome-like and at deposit morphologies.
Experiments: A method based on a thin-film interference was used to track the drop height profile and contact line moti…
▽ More
Hypothesis: Contact-line motion upon drying of sessile droplet strongly affects the solute transport and solvent evaporation profile. Hence, it should have a strong impact on the deposit formation and might be responsible for volcano-like, dome-like and at deposit morphologies.
Experiments: A method based on a thin-film interference was used to track the drop height profile and contact line motion during the drying. A diverse set of drying scenarios was obtained by using inks with different solvent compositions and by adjusting the substrate wetting properties. The experimental data was compared to the predictions of phenomenological model.
Findings: We highlight the essential role of contact-line mobility on the deposit morphology of solution-based inks. A pinned contact line produces exclusively ring-like deposits under normal conditions. On the contrary, drops with a mobile contact line can produce ring-, at- or dome-like morphology. The developed phenomenological model shows that the deposit morphology depends on solvent evaporation profile, evolution of the drop radius relative to its contact angle, and the ratio between initial and maximal (gelling) solute concentration. These parameters can be adjusted by the ink solvent composition and substrate wetting behaviour, which provides a way for deposition of uniform and at deposits via inkjet printing.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Simultaneous MMC readout using a tailored μMUX based readout system
Authors:
Daniel Richter,
Mathias Wegner,
Felix Ahrens,
Christian Enss,
Nick Karcher,
Oliver Sander,
Constantin Schuster,
Marc Weber,
Thomas Wolber,
Sebastian Kempf
Abstract:
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with th…
▽ More
Magnetic microcalorimeters (MMCs) are cryogenic, energy-dispersive single-particle detectors providing excellent energy resolution, intrinsically fast signal rise time, quantum efficiency close to 100\%, large dynamic range as well as almost ideal linear response. One of the remaining challenges to be overcome to ultimately allow for the utilization of large-scale MMC based detector arrays with thousands to millions of individual pixels is the realization of a SQUID based multiplexing technique particularly tailored for MMC readout. Within this context, we report on the first truly multiplexed readout of an MMC based detector array using a frequency-division multiplexing approach realized by a custom microwave SQUID multiplexer based readout system.
△ Less
Submitted 27 March, 2023; v1 submitted 14 November, 2022;
originally announced November 2022.
-
A stochastic model for the residence time of solid particles in turbulent Rayleigh-Bénard Flow
Authors:
Colin J. Denzel,
Andrew D. Bragg,
David H. Richter
Abstract:
The Pi Chamber, located at Michigan Technological University, generates moist turbulent Rayleigh-Bénard flow in order to replicate steady-state cloud conditions. We take inspiration from this setup and consider a particle-laden, convectively-driven turbulent flow using direct numerical simulation (DNS). The aim of our study is to develop a simple stochastic model that can accurately describe the r…
▽ More
The Pi Chamber, located at Michigan Technological University, generates moist turbulent Rayleigh-Bénard flow in order to replicate steady-state cloud conditions. We take inspiration from this setup and consider a particle-laden, convectively-driven turbulent flow using direct numerical simulation (DNS). The aim of our study is to develop a simple stochastic model that can accurately describe the residence times of the particles in the flow, this time being determined by the complex competition between the gravitational settling of the particles, and the interaction of the particles with the turbulent structures in the flow. A simple conceptual picture underlies the stochastic model, namely that the particles take repeated trips between the top and bottom boundaries, driven by the convective cells that occur in Rayleigh-Bénard turbulence, and that their residence times are determined by the time it takes to complete one of these trips, which varies from one trip to another, and the probability of falling out to the bottom boundary after each trip. Despite the simplicity of the model, it yields quantitatively accurate predictions of the distribution of the particle residence times in the flow. We independently vary the Stokes numbers and settling velocities in order to shed light on the independent roles that gravity and inertia play in governing these residence times.
△ Less
Submitted 27 August, 2022;
originally announced August 2022.
-
Online Demodulation and Trigger for Flux-ramp Modulated SQUID Signals
Authors:
N. Karcher,
T. Muscheid,
T. Wolber,
D. Richter,
C. Enss,
S. Kempf,
O. Sander
Abstract:
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID outpu…
▽ More
Due to the periodic characteristics of SQUIDs, a suitable linearization technique is required for SQUID-based readout. Flux-ramp modulation is a common linearization technique and is typically applied for the readout of a microwave-SQUID-multiplexer as well as since recently also for dc-SQUIDs. Flux-ramp modulation requires another stage in the signal processing chain to demodulate the SQUID output signal before further processing. For cryogenic microcalorimenters, these events are given by fast exponentially rising and slowly exponentially decaying pulses which shall be detected by a trigger engine and recorded by a storage logic. Since the data rate can be decreased significantly by demodulation and event detection, it is desirable to do both steps on the deployed fast FPGA logic during measurement before passing the data to a general-purpose processor.
In this contribution, we show the implementation of efficient multi-channel flux-ramp demodulation computed at run-time on a SoC-FPGA. Furthermore, a concept and implementation for an online trigger and buffer mechanism with its theoretical trigger loss rates depending on buffer size is presented. Both FPGA modules can be operated with up to 500 MHz clock frequency and can efficiently process 32 channels. Correct functionality and data reduction capability of the modules are demonstrated in measurements utilizing magnetic microcalorimeter irradiated with an Iron-55 source for event generation and read out by a microwave SQUID multiplexer.
△ Less
Submitted 22 October, 2021;
originally announced October 2021.
-
Multichannel read-out for arrays of metallic magnetic calorimeters
Authors:
F. Mantegazzini,
S. Allgeier,
A. Barth,
C. Enss,
A. Ferring-Siebert,
A. Fleischmann,
L. Gastaldo,
R. Hammann,
D. Hengstler,
S. Kempf,
D. Richter,
D. Schulz,
D. Unger,
C. Velte,
M. Wegner
Abstract:
Metallic magnetic micro-calorimeters (MMCs) operated at millikelvin temperature offer the possibility to achieve eV-scale energy resolution with high stopping power for X-rays and massive particles in an energy range up to several tens of keV. This motivates their use in a wide range of applications in fields as particle physics, atomic and molecular physics. Present detector systems consist of MM…
▽ More
Metallic magnetic micro-calorimeters (MMCs) operated at millikelvin temperature offer the possibility to achieve eV-scale energy resolution with high stopping power for X-rays and massive particles in an energy range up to several tens of keV. This motivates their use in a wide range of applications in fields as particle physics, atomic and molecular physics. Present detector systems consist of MMC arrays read out by 32 two-stage SQUID read-out channels. In contrast to the design of the detector array and consequently the design of the front-end SQUIDs, which need to be optimised for the physics case and the particles to be detected in a given experiment, the read-out chain can be standardised. We present our new standardised 32-channel parallel read-out for the operation of MMC arrays to be operated in a dilution refrigerator. The read-out system consists of a detector module, whose design depends on the particular application, an amplifier module, ribbon cables from room temperature to the millikelvin platform and a data acquisition system. In particular, we describe the realisation of the read-out system prepared for the ECHo-1k experiment for the operation of two 64-pixel arrays. The same read-out concept is also used for the maXs detector systems, developed for the study of the de-excitation of highly charged heavy ions by X-rays, as well as for the MOCCA system, developed for the energy and position sensitive detection of neutral molecular fragments for the study of fragmentation when molecular ions recombine with electrons. The choice of standard modular components for the operation of 32-channel MMC arrays offer the flexibility to upgrade detector modules without the need of any changes in the read-out system and the possibility to individually exchange parts in case of damages or failures.
△ Less
Submitted 13 October, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Flux ramp modulation based MHz frequency-division dc-SQUID multiplexer
Authors:
Daniel Richter,
Ludwig Hoibl,
Thomas Wolber,
Nick Karcher,
Andreas Fleischmann,
Christian Enss,
Marc Weber,
Oliver Sander,
Sebastian Kempf
Abstract:
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according…
▽ More
We present a MHz frequency-division dc-SQUID multiplexer that is based on flux ramp modulation and a series array of $N$ identical current-sensing dc-SQUIDs with tightly coupled input coil. By running a periodic, sawtooth-shaped current signal through an additional modulation coil being tightly, but non-uniformly coupled to the individual SQUIDs, the voltage drop across the array changes according to the superposition of the flux-to-voltage characteristics of the individual SQUIDs within each cycle of the modulation signal. In this mode of operation, an input signal injected in the input coil of one of the SQUIDs and being quasi-static within a time frame adds a constant flux offset and leads to a phase shift of the associated SQUID characteristics. The latter is inherently proportional to the input signal and can be inferred by channelizing and down-converting the sampled array output voltage. Using a prototype multiplexer as well as a self-developed high-speed readout electronics for real-time phase determination, we demonstrate the simultaneous readout of four signal sources with MHz bandwidth per channel.
△ Less
Submitted 4 March, 2021; v1 submitted 16 January, 2021;
originally announced January 2021.
-
When is settling important for particle concentrations in wall-bounded turbulent flows?
Authors:
Andrew D. Bragg,
David H. Richter,
Guiquan Wang
Abstract:
We explore the role of gravitational settling on inertial particle concentrations in a wall-bounded turbulent flow. While it may be thought that settling can be ignored when the settling parameter $Sv\equiv v_s/u_τ$ is small ($v_s$ - Stokes settling velocity, $u_τ$ - fluid friction velocity), we show that even in this regime the settling may make a leading order contribution to the concentration p…
▽ More
We explore the role of gravitational settling on inertial particle concentrations in a wall-bounded turbulent flow. While it may be thought that settling can be ignored when the settling parameter $Sv\equiv v_s/u_τ$ is small ($v_s$ - Stokes settling velocity, $u_τ$ - fluid friction velocity), we show that even in this regime the settling may make a leading order contribution to the concentration profiles. This is because the importance of settling is determined, not by the size of $v_s$ compared with $u_τ$ or any other fluid velocity scale, but by the size of $v_s$ relative to the other mechanisms that control the vertical particle velocity and concentration profile. We explain this in the context of the particle mean-momentum equation, and show that in general, there always exists a region in the boundary layer where settling cannot be neglected, no matter how small $Sv$ is (provided it is finite). Direct numerical simulations confirm the arguments, and show that the near-wall concentration is highly dependent on $Sv$ even when $Sv\ll 1$, and can reduce by an order of magnitude when $Sv$ is increased from $O(10^{-4})$ and $O(10^{-2})$. The results also show that the preferential sampling of ejection events in the boundary layer by inertial particles when $Sv=0$ is profoundly altered as $Sv$ is increased, and is replaced by a preferential sampling of sweep events due to the onset of the preferential sweeping mechanism.
△ Less
Submitted 9 September, 2021; v1 submitted 12 January, 2021;
originally announced January 2021.
-
Mechanisms governing the settling velocities and spatial distributions of inertial particles in wall-bounded turbulence
Authors:
Andrew D Bragg,
David H Richter,
Guiquan Wang
Abstract:
We use theory and Direct Numerical Simulations (DNS) to explore the average vertical velocities and spatial distributions of inertial particles settling in a wall-bounded turbulent flow. The theory is based on the exact phase-space equation for the Probability Density Function describing particle positions and velocities. This allowed us to identify the distinct physical mechanisms governing the p…
▽ More
We use theory and Direct Numerical Simulations (DNS) to explore the average vertical velocities and spatial distributions of inertial particles settling in a wall-bounded turbulent flow. The theory is based on the exact phase-space equation for the Probability Density Function describing particle positions and velocities. This allowed us to identify the distinct physical mechanisms governing the particle transport. We then examined the asymptotic behavior of the particle motion near the wall, revealing the fundamental differences to the near wall behavior that is produced when incorporating gravitational settling. When the average vertical particle mass flux is zero, the averaged vertical particle velocity is zero away from the wall due to the particles preferentially sampling regions where the fluid velocity is positive, which balances with the downward Stokes settling velocity. When the average mass flux is negative, the combined effects of turbulence and particle inertia lead to average vertical particle velocities that can significantly exceed the Stokes settling velocity, by as much as ten times. Sufficiently far from the wall, the enhanced vertical velocities are due to the preferential sweeping mechanism. However, as the particles approach the wall, the contribution from the preferential sweeping mechanism becomes small, and a downward contribution from the turbophoretic velocity dominates the behavior. Close to the wall, the particle concentration grows as a power-law, but the nature of this power law depends on the particle Stokes number. Finally, our results highlight how the Rouse model of particle concentration is to be modified for particles with finite inertia.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Transport and two-way coupling effect of inertial particles by large-scale and very-large-scale motions in turbulence
Authors:
Guiquan Wang,
David Richter
Abstract:
Direct numerical simulations two-way coupled with inertial particles are used to investigate the particle distribution and two-way coupling effect of low-inertia ($St_{LSM}=0.0625$, $St_{VLSM}=0.009$) and high-inertia ($St_{LSM}=0.475$, $St_{VLSM}=0.069$) particles associated with the large-scale motions (LSMs) and very-large-scale motions (VLSMs) in an open channel flow at a Reynolds number of…
▽ More
Direct numerical simulations two-way coupled with inertial particles are used to investigate the particle distribution and two-way coupling effect of low-inertia ($St_{LSM}=0.0625$, $St_{VLSM}=0.009$) and high-inertia ($St_{LSM}=0.475$, $St_{VLSM}=0.069$) particles associated with the large-scale motions (LSMs) and very-large-scale motions (VLSMs) in an open channel flow at a Reynolds number of $Re_τ= 550$. One method of filtering the VLSMs from the flow is via artificial domain truncation, which alters the mean particle concentration profile and particle clustering due to the removal of VLSMs from a large domain simulation. In order to exclude possible correlation of the turbulence introduced by a small domain size with periodic boundary conditions, low- and high-pass filtering is performed during the simulation to isolate the particle interaction with different spatial scales. The results show that particle accumulation and turbophoresis are under-predicted without VLSMs, whereas the particle clustering and two-way coupling effects are mainly determined by particle coupling with LSMs. In the inner layer, the elongated streamwise anisotropic particle clustering can be reproduced by particles coupling solely with LSMs for low Stokes number ($St_{LSM}=0.0625$) particles. However, we do not observe similar particle clustering behavior in the outer layer as seen in the full simulation by coupling particles with either LSMs or VLSMs for high Stokes number ($St_{VLSM}=0.069$) particles. This indicates that the organized particle structures are formed by the joint action of LSMs and VLSMs, especially for high Stokes number particles in the outer layer.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Two mechanisms of VLSM modulation by inertial particles in open channel flow
Authors:
Guiquan Wang,
David Richter
Abstract:
Very large-scale motions (VLSMs) and large-scale motions (LSMs) coexist at moderate Reynolds numbers in a very long open channel flow. Direct numerical simulations two-way coupled with inertial particles are analysed using spectral information to investigate the modulation of VLSMs. In the wall-normal direction, particle distributions (mean/preferential concentration) exhibit two distinct behavior…
▽ More
Very large-scale motions (VLSMs) and large-scale motions (LSMs) coexist at moderate Reynolds numbers in a very long open channel flow. Direct numerical simulations two-way coupled with inertial particles are analysed using spectral information to investigate the modulation of VLSMs. In the wall-normal direction, particle distributions (mean/preferential concentration) exhibit two distinct behaviors in the inner flow and outer flow, corresponding to two highly anisotropic turbulent structures, LSMs and VLSMs. This results in particle inertia's non-monotonic effects on the VLSMs: low inertia (based on the inner scale) and high inertia (based on the outer scale) both strengthen the VLSMs whereas moderate and very high inertia have little influence. Through conditional tests, low and high inertia particles enhance VLSMs following two distinct routes. Low inertia particles promote VLSMs indirectly through the enhancement of the regeneration cycle (the self-sustaining mechanism of LSMs) in the inner region whereas high inertia particles enhance the VLSM directly through contribution to the Reynolds shear stress at similar temporal scales in the outer region. This understanding also provides more general insight into inner-outer interaction in high Reynolds number, wall-bounded flows.
△ Less
Submitted 18 February, 2019; v1 submitted 10 November, 2018;
originally announced November 2018.
-
Modulation of the turbulence regeneration cycle by inertial particles in planar Couette flow
Authors:
Guiquan Wang,
David Richter
Abstract:
Two-way coupled direct numerical simulations are used to investigate the effects of inertial particles on self-sustained, turbulent coherent structures (i.e. the so-called the regeneration cycle) in plane Couette flow at low Reynolds number just above the onset of transition. Tests show two limiting behaviors with increasing particle inertia, similar to the results from the linear stability analys…
▽ More
Two-way coupled direct numerical simulations are used to investigate the effects of inertial particles on self-sustained, turbulent coherent structures (i.e. the so-called the regeneration cycle) in plane Couette flow at low Reynolds number just above the onset of transition. Tests show two limiting behaviors with increasing particle inertia, similar to the results from the linear stability analysis of saffman, 1962: low-inertia particles trigger the laminar-to-turbulent instability whereas high-inertia particles tend to stabilize turbulence due to the extra dissipation induced by particle-fluid coupling. Furthermore, it is found that the streamwise coupling between phases is the dominant factor in damping the turbulence and is highly related to the spatial distribution of the particles. The presence of particles in different turbulent coherent structures (large scale vortices or large scale streaks) determines the turbulent kinetic energy of particulate phase, which is related to the particle response time scaled by the turnover time of large scale vortices. By quantitatively investigating the periodic character of the whole regeneration cycle and the phase difference between linked sub-steps, we show that the presence of inertial particles does not alter the periodic nature of the cycle or the relative length of each of the sub-steps. Instead, high-inertia particles greatly weaken the large-scale vortices as well as the streamwise vorticity stretching and lift-up effects, thereby suppressing the fluctuating amplitude of the large scale streaks. The primary influence of low-inertia particles, however, is to strengthen the large scale vortices, which fosters the cycle and ultimately reduces the critical Reynolds number.
△ Less
Submitted 5 July, 2018;
originally announced July 2018.
-
Phonon-Assisted Incoherent Excitation of a Quantum Dot and its Emission Properties
Authors:
S. Weiler,
A. Ulhaq,
C. Roy,
S. M. Ulrich,
D. Richter,
M. Jetter,
S. Hughes,
P. Michler
Abstract:
We present a detailed study of a phonon-assisted incoherent excitation mechanism of single quantum dots. A spectrally-detuned laser couples to a quantum dot transition by mediation of acoustic phonons, whereby excitation efficiencies up to 20 % with respect to strictly resonant excitation can be achieved at T = 9 K. Laser frequency-dependent analysis of the quantum dot intensity distinctly maps th…
▽ More
We present a detailed study of a phonon-assisted incoherent excitation mechanism of single quantum dots. A spectrally-detuned laser couples to a quantum dot transition by mediation of acoustic phonons, whereby excitation efficiencies up to 20 % with respect to strictly resonant excitation can be achieved at T = 9 K. Laser frequency-dependent analysis of the quantum dot intensity distinctly maps the underlying acoustic phonon bath and shows good agreement with our polaron master equation theory. An analytical solution for the photoluminescence is introduced which predicts a broadband incoherent coupling process when electron-phonon scattering is in the strong phonon coupling (polaronic) regime. Additionally, we investigate the coherence properties of the emitted light and study the impact of the relevant pump and phonon bath parameters.
△ Less
Submitted 20 July, 2012;
originally announced July 2012.
-
SPHERES, Jülich's High-Flux Neutron Backscattering Spectrometer at FRM II
Authors:
Joachim Wuttke,
Alfred Budwig,
Matthias Drochner,
Hans Kämmerling,
Franz-Joseph Kayser,
Harald Kleines,
Vladimir Ossovyi,
Luis Carlos Pardo,
Michael Prager,
Dieter Richter,
Gerald J. Schneider,
Harald Schneider,
Simon Staringer
Abstract:
SPHERES (SPectrometer with High Energy RESolution) is a third-generation neutron backscattering spectrometer, located at the 20 MW German neutron source FRM II and operated by the Juelich Centre for Neutron Science. It offers an energy resolution (fwhm) better than 0.65 micro-eV, a dynamic range of +-31 micro-eV, and a signal-to-noise ratio of up to 1750:1.
SPHERES (SPectrometer with High Energy RESolution) is a third-generation neutron backscattering spectrometer, located at the 20 MW German neutron source FRM II and operated by the Juelich Centre for Neutron Science. It offers an energy resolution (fwhm) better than 0.65 micro-eV, a dynamic range of +-31 micro-eV, and a signal-to-noise ratio of up to 1750:1.
△ Less
Submitted 13 August, 2012; v1 submitted 16 April, 2012;
originally announced April 2012.
