-
Jet Tagging with More-Interaction Particle Transformer
Authors:
Yifan Wu,
Kun Wang,
Congqiao Li,
Huilin Qu,
Jingya Zhu
Abstract:
In this study, we introduce the More-Interaction Particle Transformer (MIParT), a novel deep learning neural network designed for jet tagging. This framework incorporates our own design, the More-Interaction Attention (MIA) mechanism, which increases the dimensionality of particle interaction embeddings. We tested MIParT using the top tagging and quark-gluon datasets. Our results show that MIParT…
▽ More
In this study, we introduce the More-Interaction Particle Transformer (MIParT), a novel deep learning neural network designed for jet tagging. This framework incorporates our own design, the More-Interaction Attention (MIA) mechanism, which increases the dimensionality of particle interaction embeddings. We tested MIParT using the top tagging and quark-gluon datasets. Our results show that MIParT not only matches the accuracy and AUC of LorentzNet and a series of Lorentz-equivariant methods, but also significantly outperforms the ParT model in background rejection. Specifically, it improves background rejection by approximately 25% at a 30% signal efficiency on the top tagging dataset and by 3% on the quark-gluon dataset. Additionally, MIParT requires only 30% of the parameters and 53% of the computational complexity needed by ParT, proving that high performance can be achieved with reduced model complexity. For very large datasets, we double the dimension of particle embeddings, referring to this variant as MIParT-Large (MIParT-L). We find that MIParT-L can further capitalize on the knowledge from large datasets. From a model pre-trained on the 100M JetClass dataset, the background rejection performance of the fine-tuned MIParT-L improved by 39% on the top tagging dataset and by 6% on the quark-gluon dataset, surpassing that of the fine-tuned ParT. Specifically, the background rejection of fine-tuned MIParT-L improved by an additional 2% compared to the fine-tuned ParT. The results suggest that MIParT has the potential to advance efficiency benchmarks for jet tagging and event identification in particle physics.
△ Less
Submitted 15 August, 2024; v1 submitted 11 July, 2024;
originally announced July 2024.
-
Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$
Authors:
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (645 additional authors not shown)
Abstract:
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be…
▽ More
The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σ$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Burn-in Test and Thermal Performance Evaluation of Silicon Photomultipliers for the JUNO-TAO Experiment
Authors:
X. Chen,
G. F. Cao,
M. H. Qu,
H. W. Wang,
N. Anfimov,
A. Rybnikov,
J. Y. Xu,
A. Q. Su,
Z. L. Chen,
J. Cao,
Y. C. Li,
M. Qi
Abstract:
This study evaluates more than 4,000 tiles made of Hamamatsu visual-sensitive silicon photomultipier (SiPM), each with dimensions of 5 $\times$ 5 cm$^2$, intended for the central detector of the Taishan Anti-neutrino Observatory (TAO), a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO) aimed at measuring the reactor anti-neutrino energy spectrum with unprecedented energ…
▽ More
This study evaluates more than 4,000 tiles made of Hamamatsu visual-sensitive silicon photomultipier (SiPM), each with dimensions of 5 $\times$ 5 cm$^2$, intended for the central detector of the Taishan Anti-neutrino Observatory (TAO), a satellite experiment of the Jiangmen Underground Neutrino Observatory (JUNO) aimed at measuring the reactor anti-neutrino energy spectrum with unprecedented energy resolution. All SiPM tiles underwent a room temperature burn-in test in the dark for two weeks, while cryogenic testing analyzed the thermal dependence of parameters for some sampled SiPMs. Results from these comprehensive tests provide crucial insights into the long-term performance and stability of the 10 square meters of SiPMs operating at -50°C to detect scintillation photons in the TAO detector. Despite some anomalies awaiting further inspection, all SiPMs successfully passed the burn-in test over two weeks at room temperature, which is equivalent to 6.7 years at -50°C. Results are also used to guide optimal SiPM selection, configuration, and operation, ensuring reliability and sustainability in reactor neutrino measurements. This work also provides insights for a rapid and robust quality assessment in future experiments that employ large-scale SiPMs as detection systems.
△ Less
Submitted 23 July, 2024; v1 submitted 13 June, 2024;
originally announced June 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Accelerating Resonance Searches via Signature-Oriented Pre-training
Authors:
Congqiao Li,
Antonios Agapitos,
Jovin Drews,
Javier Duarte,
Dawei Fu,
Leyun Gao,
Raghav Kansal,
Gregor Kasieczka,
Louis Moureaux,
Huilin Qu,
Cristina Mantilla Suarez,
Qiang Li
Abstract:
The search for heavy resonances beyond the Standard Model (BSM) is a key objective at the LHC. While the recent use of advanced deep neural networks for boosted-jet tagging significantly enhances the sensitivity of dedicated searches, it is limited to specific final states, leaving vast potential BSM phase space underexplored. We introduce a novel experimental method, Signature-Oriented Pre-traini…
▽ More
The search for heavy resonances beyond the Standard Model (BSM) is a key objective at the LHC. While the recent use of advanced deep neural networks for boosted-jet tagging significantly enhances the sensitivity of dedicated searches, it is limited to specific final states, leaving vast potential BSM phase space underexplored. We introduce a novel experimental method, Signature-Oriented Pre-training for Heavy-resonance ObservatioN (Sophon), which leverages deep learning to cover an extensive number of boosted final states. Pre-trained on the comprehensive JetClass-II dataset, the Sophon model learns intricate jet signatures, ensuring the optimal constructions of various jet tagging discriminates and enabling high-performance transfer learning capabilities. We show that the method can not only push widespread model-specific searches to their sensitivity frontier, but also greatly improve model-agnostic approaches, accelerating LHC resonance searches in a broad sense.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
BUFF: Boosted Decision Tree based Ultra-Fast Flow matching
Authors:
Cheng Jiang,
Sitian Qian,
Huilin Qu
Abstract:
Tabular data stands out as one of the most frequently encountered types in high energy physics. Unlike commonly homogeneous data such as pixelated images, simulating high-dimensional tabular data and accurately capturing their correlations are often quite challenging, even with the most advanced architectures. Based on the findings that tree-based models surpass the performance of deep learning mo…
▽ More
Tabular data stands out as one of the most frequently encountered types in high energy physics. Unlike commonly homogeneous data such as pixelated images, simulating high-dimensional tabular data and accurately capturing their correlations are often quite challenging, even with the most advanced architectures. Based on the findings that tree-based models surpass the performance of deep learning models for tasks specific to tabular data, we adopt the very recent generative modeling class named conditional flow matching and employ different techniques to integrate the usage of Gradient Boosted Trees. The performances are evaluated for various tasks on different analysis level with several public datasets. We demonstrate the training and inference time of most high-level simulation tasks can achieve speedup by orders of magnitude. The application can be extended to low-level feature simulation and conditioned generations with competitive performance.
△ Less
Submitted 28 April, 2024;
originally announced April 2024.
-
Choose Your Diffusion: Efficient and flexible ways to accelerate the diffusion model in fast high energy physics simulation
Authors:
Cheng Jiang,
Sitian Qian,
Huilin Qu
Abstract:
The diffusion model has demonstrated promising results in image generation, recently becoming mainstream and representing a notable advancement for many generative modeling tasks. Prior applications of the diffusion model for both fast event and detector simulation in high energy physics have shown exceptional performance, providing a viable solution to generate sufficient statistics within a cons…
▽ More
The diffusion model has demonstrated promising results in image generation, recently becoming mainstream and representing a notable advancement for many generative modeling tasks. Prior applications of the diffusion model for both fast event and detector simulation in high energy physics have shown exceptional performance, providing a viable solution to generate sufficient statistics within a constrained computational budget in preparation for the High Luminosity LHC. However, many of these applications suffer from slow generation with large sampling steps and face challenges in finding the optimal balance between sample quality and speed. The study focuses on the latest benchmark developments in efficient ODE/SDE-based samplers, schedulers, and fast convergence training techniques. We test on the public CaloChallenge and JetNet datasets with the designs implemented on the existing architecture, the performance of the generated classes surpass previous models, achieving significant speedup via various evaluation metrics.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
SiN-on-SOI Optical Phased Array LiDAR for Ultra-Wide Field of View and 4D Sensing
Authors:
Baisong Chen,
Yingzhi Li,
Qijie Xie,
Quanxin Na,
Min Tao,
Ziming Wang,
Zihao Zhi,
Heming Hu,
Xuetong Li,
Huan Qu,
Yafang He,
Xiaolong Hu,
Guoqiang Lo,
Junfeng Song
Abstract:
Three-dimensional (3D) imaging techniques are facilitating the autonomous vehicles to build intelligent system. Optical phased arrays (OPAs) featured by all solid-state configurations are becoming a promising solution for 3D imaging. However, majority of state-of-art OPAs commonly suffer from severe power degradation at the edge of field of view (FoV), resulting in limited effective FoV and deteri…
▽ More
Three-dimensional (3D) imaging techniques are facilitating the autonomous vehicles to build intelligent system. Optical phased arrays (OPAs) featured by all solid-state configurations are becoming a promising solution for 3D imaging. However, majority of state-of-art OPAs commonly suffer from severe power degradation at the edge of field of view (FoV), resulting in limited effective FoV and deteriorating 3D imaging quality. Here, we synergize chained grating antenna and vernier concept to design a novel OPA for realizing a record wide 160°-FoV 3D imaging. By virtue of the chained antenna, the OPA exhibits less than 3-dB beam power variation within the 160° FoV. In addition, two OPAs with different pitch are integrated monolithically to form a quasi-coaxial Vernier OPA transceiver. With the aid of flat beam power profile provided by the chained antennas, the OPA exhibits uniform beam quality at an arbitrary steering angle. The superior beam steering performance enables the OPA to accomplish 160° wide-FoV 3D imaging based on the frequency-modulated continuous-wave (FMCW) LiDAR scheme. The ranging accuracy is 5.5-mm. Moreover, the OPA is also applied to velocity measurement for 4D sensing. To our best knowledge, it is the first experimental implementation of a Vernier OPA LiDAR on 3D imaging to achieve a remarkable FoV.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Does Lorentz-symmetric design boost network performance in jet physics?
Authors:
Congqiao Li,
Huilin Qu,
Sitian Qian,
Qi Meng,
Shiqi Gong,
Jue Zhang,
Tie-Yan Liu,
Qiang Li
Abstract:
In the deep learning era, improving the neural network performance in jet physics is a rewarding task as it directly contributes to more accurate physics measurements at the LHC. Recent research has proposed various network designs in consideration of the full Lorentz symmetry, but its benefit is still not systematically asserted, given that there remain many successful networks without taking it…
▽ More
In the deep learning era, improving the neural network performance in jet physics is a rewarding task as it directly contributes to more accurate physics measurements at the LHC. Recent research has proposed various network designs in consideration of the full Lorentz symmetry, but its benefit is still not systematically asserted, given that there remain many successful networks without taking it into account. We conduct a detailed study on the Lorentz-symmetric design. We propose two generalized approaches for modifying a network - these methods are experimented on Particle Flow Network, ParticleNet, and LorentzNet, and exhibit a general performance gain. We also reveal that the notable improvement attributed to the "pairwise mass" feature in the network is due to its introduction of a structure that fully complies with Lorentz symmetry. We confirm that Lorentz-symmetry preservation serves as a strong inductive bias of jet physics, hence calling for attention to such general recipes in future network designs.
△ Less
Submitted 7 March, 2024; v1 submitted 16 August, 2022;
originally announced August 2022.
-
Ten more times precision improved method for surface roughness estimation with weak measurement
Authors:
Hui-Chao Qu,
Ya Xiao,
Xin-Hong Han,
Shan-Chuan Dong,
Yong-Jian Gu
Abstract:
High-precision surface roughness estimation plays an important role in many applications. However, the classical estimating methods are limited by shot noise and only can achieve the precision of 0.1 nm with white light interferometer. Here, we propose two weak measurement schemes to estimate surface roughness through spectrum analysis and intensity analysis. The estimating precision with spectrum…
▽ More
High-precision surface roughness estimation plays an important role in many applications. However, the classical estimating methods are limited by shot noise and only can achieve the precision of 0.1 nm with white light interferometer. Here, we propose two weak measurement schemes to estimate surface roughness through spectrum analysis and intensity analysis. The estimating precision with spectrum analysis is about $10 ^{-5}$ nm by using a currently available spectrometer with the resolution of $Δλ= 0.04$ pm and the corresponding sensitivity is better than 0.1 THz/nm. And the precision and sensitivity of the light intensity analysis scheme achieve as high as 0.07 nm and 1/nm, respectively. By introducing a modulated phase, we show that the sensitivity and precision achieved in our schemes can be effectively retained in a wider dynamic range. We further provide the experimental design of the surface profiler based on our schemes. It simultaneously meets the requirements of high precision, high sensitivity, and wide measurement range, making it to be a promising practical tool.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
High-performance and Low-power Transistors Based on Anisotropic Monolayer $β$-TeO$_2$
Authors:
Shiying Guo,
Hengze Qu,
Wenhan Zhou,
Shengyuan A. Yang,
Yee Sin Ang,
Jing Lu,
Haibo Zeng,
Shengli Zhang
Abstract:
Two-dimensional (2D) semiconductors offer a promising prospect for high-performance and energy-efficient devices especially in the sub-10 nm regime. Inspired by the successful fabrication of 2D $β$-TeO$_2$ and the high on/off ratio and high air-stability of fabricated field effect transistors (FETs) [Nat. Electron. 2021, 4, 277], we provide a comprehensive investigation of the electronic structure…
▽ More
Two-dimensional (2D) semiconductors offer a promising prospect for high-performance and energy-efficient devices especially in the sub-10 nm regime. Inspired by the successful fabrication of 2D $β$-TeO$_2$ and the high on/off ratio and high air-stability of fabricated field effect transistors (FETs) [Nat. Electron. 2021, 4, 277], we provide a comprehensive investigation of the electronic structure of monolayer $β$-TeO$_2$ and the device performance of sub-10 nm metal oxide semiconductors FETs (MOSFETs) based on this material. The anisotropic electronic structure of monolayer $β$-TeO$_2$ plays a critical role in the anisotropy of transport properties for MOSFETs. We show that the 5.2-nm gate-length n-type MOSFET holds an ultra-high on-state current exceeding 3700 μA/μm according to International Roadmap for Devices and Systems (IRDS) 2020 goals for high-performance devices, which is benefited by the highly anisotropic electron effective mass. Moreover, monolayer $β$-TeO$_2$ MOSFETs can fulfill the IRDS 2020 goals for both high-performance and low-power devices in terms of on-state current, sub-threshold swing, delay time, and power-delay product. This study unveils monolayer $β$-TeO$_2$ as a promising candidate for ultra-scaled devices in future nanoelectronics.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Particle Transformer for Jet Tagging
Authors:
Huilin Qu,
Congqiao Li,
Sitian Qian
Abstract:
Jet tagging is a critical yet challenging classification task in particle physics. While deep learning has transformed jet tagging and significantly improved performance, the lack of a large-scale public dataset impedes further enhancement. In this work, we present JetClass, a new comprehensive dataset for jet tagging. The JetClass dataset consists of 100 M jets, about two orders of magnitude larg…
▽ More
Jet tagging is a critical yet challenging classification task in particle physics. While deep learning has transformed jet tagging and significantly improved performance, the lack of a large-scale public dataset impedes further enhancement. In this work, we present JetClass, a new comprehensive dataset for jet tagging. The JetClass dataset consists of 100 M jets, about two orders of magnitude larger than existing public datasets. A total of 10 types of jets are simulated, including several types unexplored for tagging so far. Based on the large dataset, we propose a new Transformer-based architecture for jet tagging, called Particle Transformer (ParT). By incorporating pairwise particle interactions in the attention mechanism, ParT achieves higher tagging performance than a plain Transformer and surpasses the previous state-of-the-art, ParticleNet, by a large margin. The pre-trained ParT models, once fine-tuned, also substantially enhance the performance on two widely adopted jet tagging benchmarks. The dataset, code and models are publicly available at https://github.com/jet-universe/particle_transformer.
△ Less
Submitted 29 January, 2024; v1 submitted 8 February, 2022;
originally announced February 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Experimental parameters, combined dynamics, and nonlinearity of a Magnonic-Opto-Electronic Oscillator (MOEO)
Authors:
Yuzan Xiong,
Zhizhi Zhang,
Yi Li,
Mouhamad Hammami,
Joseph Sklenar,
Laith Alahmed,
Peng Li,
Thomas Sebastian,
Hongwei Qu,
Axel Hoffmann,
Valentine Novosad,
Wei Zhang
Abstract:
We report the construction and characterization of a comprehensive magnonic-opto-electronic oscillator (MOEO) system based on 1550-nm photonics and yttirum iron garnet (YIG) magnonics. The system exhibits a rich and synergistic parameter space because of the ability to control individual photonic, electronic, and magnonic components. Taking advantage of the spin wave dispersion of YIG, the frequen…
▽ More
We report the construction and characterization of a comprehensive magnonic-opto-electronic oscillator (MOEO) system based on 1550-nm photonics and yttirum iron garnet (YIG) magnonics. The system exhibits a rich and synergistic parameter space because of the ability to control individual photonic, electronic, and magnonic components. Taking advantage of the spin wave dispersion of YIG, the frequency self-generation as well as the related nonlinear processes become sensitive to the external magnetic field. Besides being known as a narrowband filter and a delay element, the YIG delayline possesses spin wave modes that can be controlled to mix with the optoelectronic modes to generate higher-order harmonic beating modes. With the high sensitivity and external tunability, the MOEO system may find usefulness in sensing applications in magnetism and spintronics beyond optoelectronics and photonics.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
Optical capillary-based interferometric sensor for detection of gas refractive index
Authors:
Haijin Chen,
Xuehao Hu,
Meifan He,
Pengfei Ren,
Chao Zhang,
Hang Qu
Abstract:
In this paper, we report a capillary-based M-Z interferometer that could be used for precise detection of variations in refractive indices of gaseous samples. This sensing mechanism is quite straightforward. Cladding and core modes of a capillary are simultaneously excited by coupling coherent laser beams to the capillary cladding and core, respectively. Interferogram would be generated as the lig…
▽ More
In this paper, we report a capillary-based M-Z interferometer that could be used for precise detection of variations in refractive indices of gaseous samples. This sensing mechanism is quite straightforward. Cladding and core modes of a capillary are simultaneously excited by coupling coherent laser beams to the capillary cladding and core, respectively. Interferogram would be generated as the light transmitted from the core interferes with the light transmitted from the cladding. Variations in refractive index of the air filling the core lead to variations in phase difference between the core and cladding modes, thus shifting the interference fringes. Using a photodiode together with a narrow slit, we could analyze the fringe shifts. The resolution of the sensor was found to be 1*10-8 RIU, that is comparable to the highest resolution obtained by other interferometric sensors reported in previous literatures. Finally, we also analyze the temperature cross sensitivity of the sensor. The advantages of our sensor include very low cost, high sensitivity, straightforward sensing mechanism, and ease of fabrication.
△ Less
Submitted 10 January, 2020;
originally announced March 2020.
-
Upgrade of the Data Acquisition and Control System of Microwave Reflectometry on the Experimental Advanced Superconducting Tokamak
Authors:
Fei Wen,
Haoming Xiang,
Tao Zhang,
Yuming Wang,
Xiang Han,
Hao Qu,
Fubin Zhong,
Kaixuan Ye,
Mingfu Wu,
Gongshun Li,
Shoubiao Zhang,
Xiang Gao
Abstract:
The reflectometry on Experimental Advanced Superconducting Tokamak (EAST) is undergoing an upgrade for more comprehensive measurement of plasma density profile and fluctuation. The Data Acquisition and Control System (DACS) has been redeveloped to satisfy the requirements of the upgraded reflectometry. The profile reflectometry works in 30-110 GHz (X-mode) and 40-90GHz (O-mode), when the fluctuati…
▽ More
The reflectometry on Experimental Advanced Superconducting Tokamak (EAST) is undergoing an upgrade for more comprehensive measurement of plasma density profile and fluctuation. The Data Acquisition and Control System (DACS) has been redeveloped to satisfy the requirements of the upgraded reflectometry. The profile reflectometry works in 30-110 GHz (X-mode) and 40-90GHz (O-mode), when the fluctuation reflectometry operates at 20 fixed frequency points in 50-110GHz (X-mode) and 20-60GHz (O-mode). The PXIe-based DACS includes two 8-channel 14-bit 250MSPS digitizers and ten 8-channel 12-bit 60MSPS digitizers. A self-developed 5-channel 250MSPS arbiter waveform generator (AWG) is used to control voltage control oscillators for frequency sweeping. A trigger and clock manger and a timing module receive the trigger and clock signal from central controller and synchronize all the digitizers and the AWG. The total data rate from digitizers is 2515 MB/S. The Data from digitizers is streamed to a disk array (RAID 0) with data throughput capacity of 3000 MB/S. Meanwhile, selected data is transported to a FPGA based real-time data processing module, which utilize a pre-trained neural network to calculate the plasma density profile. Now the new reflectometry is being installed on EAST, and its performance will be tested in experimental campaign after 2018.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Strategic Research Grant Report: Fiber-shaped lithium-ion batteries with metallic electrodes
Authors:
H. Qu,
X. Lu,
M. Skorobogatiy
Abstract:
We have demonstrated a fiber lithium ion battery (LIB) fabricated by co-twisting a LiFePO4 composite-coated copper wire (cathode) together with an aluminum wire (anode). An all-solid LiPF6 composite layer functioning both as the electrolyte and battery separator is deposited onto the two electrode wires before twisting. To characterize the electrochemical properties of the battery, charge-discharg…
▽ More
We have demonstrated a fiber lithium ion battery (LIB) fabricated by co-twisting a LiFePO4 composite-coated copper wire (cathode) together with an aluminum wire (anode). An all-solid LiPF6 composite layer functioning both as the electrolyte and battery separator is deposited onto the two electrode wires before twisting. To characterize the electrochemical properties of the battery, charge-discharge tests with different C-rates are performed. The fiber LIB has an open-circuit voltage of ~3.4 V, and the typical specific capacity is found to be ~87 mAhg-1 at 0.5 C charge-discharge rate. Besides, the proposed battery has a Coulombic efficiency of more than 82% throughout all the charge-discharge tests. We also find that bending of the fiber battery has insignificant influence on the battery electrochemical properties.
△ Less
Submitted 7 March, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
Measurement of the normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio from threshold to 30 MeV with the fission Time Projection Chamber
Authors:
R. J. Casperson,
D. M. Asner,
J. Baker,
R. G. Baker,
J. S. Barrett,
N. S. Bowden,
C. Brune,
J. Bundgaard,
E. Burgett,
D. A. Cebra,
T. Classen,
M. Cunningham,
J. Deaven,
D. L. Duke,
I. Ferguson,
J. Gearhart,
V. Geppert-Kleinrath,
U. Greife,
S. Grimes,
E. Guardincerri,
U. Hager,
C. Hagmann,
M. Heffner,
D. Hensle,
N. Hertel
, et al. (39 additional authors not shown)
Abstract:
The normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio has been measured using the NIFFTE fission Time Projection Chamber from the reaction threshold to $30$~MeV. The fissionTPC is a two-volume MICROMEGAS time projection chamber that allows for full three-dimensional reconstruction of fission-fragment ionization profiles from neutron-induced fission. The measurement was performed at the…
▽ More
The normalized $^{238}$U(n,f)/$^{235}$U(n,f) cross section ratio has been measured using the NIFFTE fission Time Projection Chamber from the reaction threshold to $30$~MeV. The fissionTPC is a two-volume MICROMEGAS time projection chamber that allows for full three-dimensional reconstruction of fission-fragment ionization profiles from neutron-induced fission. The measurement was performed at the Los Alamos Neutron Science Center, where the neutron energy is determined from neutron time-of-flight. The $^{238}$U(n,f)/$^{235}$U(n,f) ratio reported here is the first cross section measurement made with the fissionTPC, and will provide new experimental data for evaluation of the $^{238}$U(n,f) cross section, an important standard used in neutron-flux measurements. Use of a development target in this work prevented the determination of an absolute normalization, to be addressed in future measurements. Instead, the measured cross section ratio has been normalized to ENDF/B-VIII.$β$5 at 14.5 MeV.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
All-solid flexible fiber-shaped lithium ion batteries
Authors:
Hang Qu,
Xin Lu,
Maksim Skorobogatiy
Abstract:
We propose fabrication of the fiber-shaped lithium ion batteries assembled by twisting a cathode filament together with an anode filament. The cathode filament is fabricated by depositing a LiFePO4 (LFP)-composite layer onto a steel-filled polyester conductive thread (SPCT). As anode filaments, we propose several scenarios including a Li4Ti5O12 (LTO)-composite coated SPCT (dip-and-dry deposition),…
▽ More
We propose fabrication of the fiber-shaped lithium ion batteries assembled by twisting a cathode filament together with an anode filament. The cathode filament is fabricated by depositing a LiFePO4 (LFP)-composite layer onto a steel-filled polyester conductive thread (SPCT). As anode filaments, we propose several scenarios including a Li4Ti5O12 (LTO)-composite coated SPCT (dip-and-dry deposition), a tin-coated SPCT (PVD deposition) as well as a bare tin wire. An electrolyte composite layer consisting of LiPF6 and polyethylene oxide (PEO) is then deposited onto both the anode and cathode filament before the battery assembly. By twisting the cathode filament and anode filament together using a customized jig, the batteries are then assembled. The open-circuit voltage is found to be ~ 2.3 V for the battery using the LTO@SPCT anode, and ~3.3 V for the battery using the tin@SPCT anode and the tin wire anode. Charge-discharge tests are carried out at different C rates for each battery sample. Experimental results suggest that the LIBs using the LTO@SPCT anode, the tin@SPCT anode and the bare tin wire anode could achieve a specific capacity of ~64, ~67, and ~96 mAh/g, respectively, when charge-discharged at 0.5-C rate. The battery could retain well its capacity after 80 charge-discharge cycles. During operation of all the batteries reported in this paper, their coulombic efficiency remained above 80%. Among the advantages of the proposed LIB are light weight, ease of fabrication, high specific capacitance, high energy density, and good durability. Finally, employing cheap and commercially-available steel-filled polyester threads as a base material in our batteries, makes them potentially suitable for integration into wearables using various standard textile manufacturing techniques.
△ Less
Submitted 15 January, 2018;
originally announced January 2018.
-
A pico-Tesla magnetic sensor with PZT bimorph and permanent magnet proof mass
Authors:
G Srinivasan,
G Sreenivasulu,
Peng Qu,
Hongwei Qu,
Vladimir Petrov
Abstract:
Ferromagnetic-ferroelectric composites have attracted interests in recent years for use as magnetic field sensors. The sensing is based on magneto-electric (ME) coupling between the electric and magnetic subsystems and is mediated by mechanical strain. Such sensors for AC magnetic fields require a bias magnetic field to achieve pT-sensitivity. Here we discuss measurements and theory for a novel pa…
▽ More
Ferromagnetic-ferroelectric composites have attracted interests in recent years for use as magnetic field sensors. The sensing is based on magneto-electric (ME) coupling between the electric and magnetic subsystems and is mediated by mechanical strain. Such sensors for AC magnetic fields require a bias magnetic field to achieve pT-sensitivity. Here we discuss measurements and theory for a novel passive, AC magnetic sensor that does not require a bias magnetic field and is based on a PZT bimorph with a permanent magnet proof mass. Mechanical strain on the PZT bimorph in this case is produced by interaction between the applied AC magnetic field and remnant magnetization of the permanent magnet, resulting in an induced voltage across PZT. Our studies have been performed on sensors with a bimorph of oppositely poled PZT platelets and a NdFeB permanent magnet proof mass. Magnetic floor noise N on the order of 100 pT per sqrHz and 10 nT per sqrHz are measured at 1 Hz and 10 Hz, respectively. When the AC magnetic field is applied at the bending resonance of 40 Hz for the bimorph, the measured N 700 pT per sqrHz. We also discuss a theory for the magneto-electro-mechanical coupling at low frequency and bending resonance in the sensor and theoretical estimates of ME voltage coefficients are in very good agreement with the data.
△ Less
Submitted 22 August, 2017;
originally announced September 2017.
-
Amplitude-flattened frequency combs in the moving photonic crystals
Authors:
Hang Qu,
Maksim Skorobogatiy
Abstract:
In this paper, we explore the spectral properties of the moving hollow-core photonic crystal waveguides (PCWs). We find that frequency combs could be generated in the hollow cores of the moving PCWs. Besides, amplitudes of the sidebands in the generated frequency combs are strongly dependent on the spatial field distribution of the core-guided modes of stationary PCWs. Particularly, we find that i…
▽ More
In this paper, we explore the spectral properties of the moving hollow-core photonic crystal waveguides (PCWs). We find that frequency combs could be generated in the hollow cores of the moving PCWs. Besides, amplitudes of the sidebands in the generated frequency combs are strongly dependent on the spatial field distribution of the core-guided modes of stationary PCWs. Particularly, we find that introduction of the periodic point defects to the innermost rows of the PCW hollow core would significantly modify the spatial field distributions of the guided modes, leading to appearance of the tightly localized defect modes. This, in turn, leads to the enhancement and equalization of the amplitudes of the side bands in the frequency combs generated by the moving PCWs.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Finding the magnetic center of sextupole using vibrating wire technique
Authors:
Lei Wu,
Xiao-long Wang,
Chun-hua Li,
Hua-min Qu
Abstract:
In order to obtain stable and high-quality synchrotron radiation photon, the magnets in the storage ring of High Energy Photon Source(HEPS) need to have a stable support and precise positioning. The vibrating wire technique can be used to pre-align the quadrupoles and sextupoles on one girder with high precision to meet the extremely low emittance requirement of HEPS. This thesis introduces the me…
▽ More
In order to obtain stable and high-quality synchrotron radiation photon, the magnets in the storage ring of High Energy Photon Source(HEPS) need to have a stable support and precise positioning. The vibrating wire technique can be used to pre-align the quadrupoles and sextupoles on one girder with high precision to meet the extremely low emittance requirement of HEPS. This thesis introduces the measurement of magnetic center of sextupole using vibrating wire. According to the measurement results, the magnetic field distribution is consistent with theoretical expectation. And vibrating wire has achieved the purpose of measuring the magnetic center and has reached a certain precision.
△ Less
Submitted 28 September, 2016;
originally announced September 2016.
-
Thin Flexible Lithium Ion Battery Featuring Graphite Paper Based Current Collectors with Enhanced Conductivity
Authors:
Hang Qu,
Jingshan Hou,
Yufeng Tang,
Oleg Semenikihin,
Maksim Skorobogatiy
Abstract:
A flexible, light weight and high conductivity current collector is the key element that enables fabrication of high performance flexible lithium ion battery. Here we report a thin, light weight and flexible lithium ion battery that uses graphite paper enhanced with a nano-sized metallic layers as the current collector, LiFePO4 and Li4Ti5O12 as the cathode and anode materials, and PE membrane soak…
▽ More
A flexible, light weight and high conductivity current collector is the key element that enables fabrication of high performance flexible lithium ion battery. Here we report a thin, light weight and flexible lithium ion battery that uses graphite paper enhanced with a nano-sized metallic layers as the current collector, LiFePO4 and Li4Ti5O12 as the cathode and anode materials, and PE membrane soaked in LiPF6 as a separator. Using thin and flexible graphite paper as a substrate for the current collector instead of a rigid and heavy metal foil enables us to demonstrate a very thin Lithium-Ion Battery into ultra-thin (total thickness including encapsulation layers of less than 250 μm) that is also light weight and highly flexible.
△ Less
Submitted 12 November, 2015;
originally announced November 2015.
-
Previous R&D of vibrating wire alignment technique for HEPS
Authors:
Lei Wu,
Xiaolong Wang,
Chunhua Li,
Huamin Qu
Abstract:
The alignment tolerance of multipoles on a girder is better than 30um in the storage ring of High Energy Photon Source HEPS which will be the next project at IHEP Institute of High Energy Physics. This is difficult to meet the precision only using the traditional optical survey method. In order to achieve this goal, vibrating wire alignment technique with high precision and sensitivity is consider…
▽ More
The alignment tolerance of multipoles on a girder is better than 30um in the storage ring of High Energy Photon Source HEPS which will be the next project at IHEP Institute of High Energy Physics. This is difficult to meet the precision only using the traditional optical survey method. In order to achieve this goal, vibrating wire alignment technique with high precision and sensitivity is considered to be used in this project. This paper presents some previous research works about theory, scheme design and achievements.
△ Less
Submitted 18 November, 2014;
originally announced November 2014.
-
Data Acquisition and Control System for Broad-band Microwave Reflectometry on EAST
Authors:
Fei Wen,
Tao Zhang,
Shoubiao Zhang,
Defeng Kong,
Yuming Wang,
Xiang Han,
Hao Qu,
Xiang Gao
Abstract:
Microwave reflectometry is a non-intrusive plasma diagnostic tool which is widely applied in many fusion devices. In 2014, the microwave reflectometry on Experimental Advanced Superconducting Tokamak (EAST) had been upgraded to measure plasma density profile and fluctuation, which covered the frequency range of Q-band (32-56 GHz), V-band (47-76 GHz) and W-band (71-110 GHz). This paper presented a…
▽ More
Microwave reflectometry is a non-intrusive plasma diagnostic tool which is widely applied in many fusion devices. In 2014, the microwave reflectometry on Experimental Advanced Superconducting Tokamak (EAST) had been upgraded to measure plasma density profile and fluctuation, which covered the frequency range of Q-band (32-56 GHz), V-band (47-76 GHz) and W-band (71-110 GHz). This paper presented a dedicated data acquisition and control system (DAQC) to meet the measurement requirements of high accuracy and temporal resolution. The DAQC consisted of two control modules, which integrated arbitrary waveform generation block (AWG) and trigger processing block (TP), and two data acquisition modules (DAQ) that was implemented base on the PXIe platform from National Instruments (NI). All the performance parameters had satisfied the requirements of reflectometry. The actual performance will be further examined in the experiments of EAST in 2014.
△ Less
Submitted 9 June, 2014;
originally announced June 2014.
-
A Time Projection Chamber for High Accuracy and Precision Fission Cross Section Measurements
Authors:
NIFFTE Collaboration,
M. Heffner,
D. M. Asner,
R. G. Baker,
J. Baker,
S. Barrett,
C. Brune,
J. Bundgaard,
E. Burgett,
D. Carter,
M. Cunningham,
J. Deaven,
D. L. Duke,
U. Greife,
S. Grimes,
U. Hager,
N. Hertel,
T. Hill,
D. Isenhower,
K. Jewell,
J. King,
J. L. Klay,
V. Kleinrath,
N. Kornilov,
R. Kudo
, et al. (25 additional authors not shown)
Abstract:
The fission Time Projection Chamber (fissionTPC) is a compact (15 cm diameter) two-chamber MICROMEGAS TPC designed to make precision cross section measurements of neutron-induced fission. The actinide targets are placed on the central cathode and irradiated with a neutron beam that passes axially through the TPC inducing fission in the target. The 4$π$ acceptance for fission fragments and complete…
▽ More
The fission Time Projection Chamber (fissionTPC) is a compact (15 cm diameter) two-chamber MICROMEGAS TPC designed to make precision cross section measurements of neutron-induced fission. The actinide targets are placed on the central cathode and irradiated with a neutron beam that passes axially through the TPC inducing fission in the target. The 4$π$ acceptance for fission fragments and complete charged particle track reconstruction are powerful features of the fissionTPC which will be used to measure fission cross sections and examine the associated systematic errors. This paper provides a detailed description of the design requirements, the design solutions, and the initial performance of the fissionTPC.
△ Less
Submitted 26 March, 2014;
originally announced March 2014.
-
Interferometric fiber-optic bending / nano-displacement sensor using plastic dual-core fiber
Authors:
H. Qu,
G. F. Yan,
M. Skorobogatiy
Abstract:
We demonstrate an interferometric fiber-optic bending/micro-displacement sensor based on a plastic dual-core fiber with one end coated with a silver mirror. The two fiber cores are first excited with the same laser beam, the light in each core is then back-reflected at the mirror-coated fiber-end, and, finally, the light from the two cores is made to interfere at the coupling end. Bending of the f…
▽ More
We demonstrate an interferometric fiber-optic bending/micro-displacement sensor based on a plastic dual-core fiber with one end coated with a silver mirror. The two fiber cores are first excited with the same laser beam, the light in each core is then back-reflected at the mirror-coated fiber-end, and, finally, the light from the two cores is made to interfere at the coupling end. Bending of the fiber leads to shifting interference fringes that can be interrogated with a slit and a single photodetector. We find experimentally that the resolution of our bending sensor is ~3x10-4 m-1 for sensing of bending curvature, as well as ~70 nm for sensing of displacement of the fiber tip. We demonstrate operation of our sensor using two examples. One is weighting of the individual micro-crystals of salt, while the other one is monitoring dynamics of isopropanol evaporation.
△ Less
Submitted 4 March, 2014;
originally announced March 2014.
-
Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS
Authors:
Yi-Qing Zou,
Na Wang,
Ling Kang,
Hua-Min Qu,
Zhe-Xi He,
Jie-Bing Yu
Abstract:
The rapid cycling synchrotron (RCS) of the China Spallation Neutron Source (CSNS) is a high intensity proton ring with beam power of 100 kW. In order to control the residual activation to meet the requirements of hands-on maintenance, a two-stage collimation system has been designed for the RCS. The collimation system consists of one primary collimator made of thin metal to scatter the beam and fo…
▽ More
The rapid cycling synchrotron (RCS) of the China Spallation Neutron Source (CSNS) is a high intensity proton ring with beam power of 100 kW. In order to control the residual activation to meet the requirements of hands-on maintenance, a two-stage collimation system has been designed for the RCS. The collimation system consists of one primary collimator made of thin metal to scatter the beam and four secondary collimators as absorbers. Thermal analysis is an important aspect in evaluating the reliability of the collimation system. The calculation of the temperature distribution and thermal stress of the primary collimator with different materials is carried out by using ANSYS code. In order to control the temperature rise and thermal stress of the primary collimator to a reasonable level, an air cooling structure is intended to be used. The mechanical design of the cooling structure is presented, and the cooling effciency with different chin numbers and wind velocity is also analyzed. Finally, the fatigue lifetime of the collimator under thermal shocks is estimated.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
Micro-displacement sensors based on plastic photonic bandgap Bragg fibers
Authors:
H. Qu,
T. Brastaviceanu,
F. Bergeron,
J. Olesik,
M. Skorobogatiy
Abstract:
We demonstrate an amplitude-based micro-displacement sensor that uses a plastic photonic bandgap Bragg fiber with one end coated with a silver layer. The reflection intensity of the Bragg fiber is characterized in response to different displacements (or bending curvatures). We note that the Bragg reflector of the fiber acts as an efficient mode stripper for the wavelengths near the edge of the fib…
▽ More
We demonstrate an amplitude-based micro-displacement sensor that uses a plastic photonic bandgap Bragg fiber with one end coated with a silver layer. The reflection intensity of the Bragg fiber is characterized in response to different displacements (or bending curvatures). We note that the Bragg reflector of the fiber acts as an efficient mode stripper for the wavelengths near the edge of the fiber bandgap, which makes the sensor extremely sensitive to bending or displacements at these wavelengths. Besides, by comparison of the Bragg fiber sensor to a sensor based on a regular multimode fiber with similar outer diameter and length, we find that the Bragg fiber sensor is more sensitive to bending due to presence of mode stripper in the form of the multilayer reflector. Experimental results show that the minimum detection limit of the Bragg fiber sensor can be smaller than 5 um for displacement sensing.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
Targets for Precision Measurements
Authors:
W. Loveland,
L. Yao,
David M. Asner,
R. G. Baker,
J. Bundgaard,
E. Burgett,
M. Cunningham,
J. Deaven,
D. L. Duke,
U. Greife,
S. Grimes,
M. Heffer,
T. Hill,
D. Isenhower,
J. L. Klay,
V. Kleinrath,
N. Kornilov,
A. B. Laptev,
T. N. Massey,
R. Meharchand,
H. Qu,
J. Ruz,
S. Sangiorgio,
B. Selhan,
L. Snyder
, et al. (9 additional authors not shown)
Abstract:
The general properties needed in targets (sources) for high precision, high accuracy measurements are reviewed. The application of these principles to the problem of developing targets for the Fission TPC is described. Longer term issues, such as the availability of actinide materials, improved knowledge of energy losses and straggling and the stability of targets during irradiation are also discu…
▽ More
The general properties needed in targets (sources) for high precision, high accuracy measurements are reviewed. The application of these principles to the problem of developing targets for the Fission TPC is described. Longer term issues, such as the availability of actinide materials, improved knowledge of energy losses and straggling and the stability of targets during irradiation are also discussed.
△ Less
Submitted 9 March, 2013;
originally announced March 2013.
-
Flexible fiber batteries for applications in smart textiles
Authors:
Hang Qu,
Jean-Pierre Bourgeois,
Julien Rolland,
Alexandru Vlad,
Jean-François Gohy,
Maksim Skorobogatiy
Abstract:
Here we discuss two alternative approaches for building flexible batteries for applications in smart textiles. The first approach uses well-studied inorganic electrochemistry (Al-NaOCl galvanic cell) and innovative packaging in order to produce batteries in a slender and flexible fiber form that can be further weaved directly into the textiles. During fabrication process the battery electrodes are…
▽ More
Here we discuss two alternative approaches for building flexible batteries for applications in smart textiles. The first approach uses well-studied inorganic electrochemistry (Al-NaOCl galvanic cell) and innovative packaging in order to produce batteries in a slender and flexible fiber form that can be further weaved directly into the textiles. During fabrication process the battery electrodes are co-drawn within a microstructured polymer fiber, which is later filled with liquid electrolyte. The second approach describes Li-ion chemistry within solid polymer electrolytes that are used to build a fully solid and soft rechargeable battery that can be furthermore stitched onto a textile, or integrated as stripes during weaving process.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Practical Metal-Wire THz Waveguides
Authors:
Andrey Markov,
Stephan Gorgutsa,
Hang Qu,
Maksim Skorobogatiy
Abstract:
Several practical implementations of the THz wire waveguides are proposed combining the low-loss, low group velocity dispersion and simplicity of excitation of the two-wire metal waveguide with the ease of manufacturing, possibility of bending and a convenient access to a modal power of the hollow core waveguide. Optical properties of the wire waveguides are investigated experimentally by THz-TDS…
▽ More
Several practical implementations of the THz wire waveguides are proposed combining the low-loss, low group velocity dispersion and simplicity of excitation of the two-wire metal waveguide with the ease of manufacturing, possibility of bending and a convenient access to a modal power of the hollow core waveguide. Optical properties of the wire waveguides are investigated experimentally by THz-TDS spectroscopy and numerically using the finite element method confirming TEM-mode guidance in a broad spectral range.
△ Less
Submitted 13 June, 2012;
originally announced June 2012.
-
The beam energy measurement system for the Beijing electron-positron collider
Authors:
E. V. Abakumova,
M. N. Achasov,
V. E. Blinov,
X. Cai,
H. Y. Dong,
C. D. Fu,
F. A. Harris,
V. V. Kaminsky,
A. A. Krasnov,
Q. Liu,
X. H. Mo,
N. Yu. Muchnoi,
I. B. Nikolaev,
Q. Qin,
H. M. Qu,
S. L. Olsen,
E. E. Pyata,
A. G. Shamov,
C. P. Shen,
K. Yu. Todyshev,
G. S. Varner,
Y. F. Wang,
Q. Xiao,
J. Q. Xu,
J. Y. Zhang
, et al. (3 additional authors not shown)
Abstract:
The beam energy measurement system (BEMS) for the upgraded Beijing electron-positron collider BEPC-II is described. The system is based on measuring the energies of Compton back-scattered photons. The relative systematic uncertainty of the electron and positron beam energy determination is estimated as 2 \cdot 10^{-5}. The relative uncertainty of the beam's energy spread is about 6 %.
The beam energy measurement system (BEMS) for the upgraded Beijing electron-positron collider BEPC-II is described. The system is based on measuring the energies of Compton back-scattered photons. The relative systematic uncertainty of the electron and positron beam energy determination is estimated as 2 \cdot 10^{-5}. The relative uncertainty of the beam's energy spread is about 6 %.
△ Less
Submitted 27 September, 2011;
originally announced September 2011.
-
Liquid-core low-refractive-index-contrast Bragg fiber sensor
Authors:
Hang Qu,
Maksim Skorobogatiy
Abstract:
We propose and experimentally demonstrate a low-refractive-index-contrast hollow-core Bragg fiber sensor for liquid analyte refractive index detection. The sensor operates using a resonant sensing principle- when the refractive index of a liquid analyte in the fiber core changes, the resonant confinement of the fiber guided mode will also change, leading to both the spectral shifts and intensity c…
▽ More
We propose and experimentally demonstrate a low-refractive-index-contrast hollow-core Bragg fiber sensor for liquid analyte refractive index detection. The sensor operates using a resonant sensing principle- when the refractive index of a liquid analyte in the fiber core changes, the resonant confinement of the fiber guided mode will also change, leading to both the spectral shifts and intensity changes in fiber transmission. As a demonstration, we characterize the Bragg fiber sensor using a set of NaCl solutions with different concentrations. Strong spectral shifts are obtained with the sensor experimental sensitivity found to be ~1400nm/RIU (refractive index unit). Besides, using theoretical modeling we show that low-refractive-index-contrast Bragg fibers are more suitable for liquid-analyte sensing applications than their high-refractive-index-contrast counterparts.
△ Less
Submitted 9 March, 2011;
originally announced March 2011.
-
The beam energy calibration system for the BEPC-II collider
Authors:
M. N. Achasov,
ChengDong Fu,
Xiaohu Mo,
N. Yu. Muchnoi,
Qing Qin,
Huamin Qu,
Yifang Wang,
Jinqiang Xu
Abstract:
This document contains a proposal of the BEPC-II collider beam energy calibration system (IHEP, Beijing). The system is based on Compton backscattering of carbon dioxide laser radiation, producing a beam of high energy photons. Their energy spectrum is then accurately measured by HPGe detector. The high-energy spectrum edge will allow to determine the average electron or positron beam energy wit…
▽ More
This document contains a proposal of the BEPC-II collider beam energy calibration system (IHEP, Beijing). The system is based on Compton backscattering of carbon dioxide laser radiation, producing a beam of high energy photons. Their energy spectrum is then accurately measured by HPGe detector. The high-energy spectrum edge will allow to determine the average electron or positron beam energy with relative accuracy about 3x10^-5.
△ Less
Submitted 1 April, 2008;
originally announced April 2008.