-
Magnetic Measurements and Alignment Results of LQXFA/B Cold Mass Assemblies at Fermilab
Authors:
J. DiMarco,
P. Akella,
G. Ambrosio,
M. Baldini,
G. Chlachidze,
S. Feher,
J. Nogiec,
V. Nikolic,
S. Stoynev,
T. Strauss,
M. Tartaglia,
P. Thompson,
D. Walbridge
Abstract:
MQXFA production series quadrupole magnets are being built for the Hi-Lumi (HL) LHC upgrade by the US Accelerator Upgrade Project (US-HL-LHC AUP). These magnets are being placed in pairs, as a cold mass, within cryostats at Fermilab, and are being tested to assess alignment and magnetic performance at Fermilab's horizontal test stand facility. The ~10 m - long assembly must meet stringent specific…
▽ More
MQXFA production series quadrupole magnets are being built for the Hi-Lumi (HL) LHC upgrade by the US Accelerator Upgrade Project (US-HL-LHC AUP). These magnets are being placed in pairs, as a cold mass, within cryostats at Fermilab, and are being tested to assess alignment and magnetic performance at Fermilab's horizontal test stand facility. The ~10 m - long assembly must meet stringent specifications for quadrupole strength and harmonic field integrals determination, magnetic axis position, and for magnet variations in positioning and local field profile. This paper describes the results of the magnetic and alignment measurements which characterize the first LQXFA/B assembly.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
Designing a Magnetic Measurement Data Acquisition and Control System with Reuse in Mind: A Rotating Coil System Example
Authors:
J. M. Nogiec,
P. Akella,
G. Chlachidze,
J. DiMarco,
M. Tartaglia,
P. Thompson,
K. Trombly-Freytag,
D. Walbridge
Abstract:
Accelerator magnet test facilities frequently need to measure different magnets on differently equipped test stands and with different instrumentation. Designing a modular and highly reusable system that combines flexibility built-in at the architectural level as well as on the component level addresses this need. Specification of the backbone of the system, with the interfaces and dataflow for so…
▽ More
Accelerator magnet test facilities frequently need to measure different magnets on differently equipped test stands and with different instrumentation. Designing a modular and highly reusable system that combines flexibility built-in at the architectural level as well as on the component level addresses this need. Specification of the backbone of the system, with the interfaces and dataflow for software components and core hardware modules, serves as a basis for building such a system. The design process and implementation of an extensible magnetic measurement data acquisition and control system are described, including techniques for maximizing the reuse of software. The discussion is supported by showing the application of this methodology to constructing two dissimilar systems for rotating coil measurements, both based on the same architecture and sharing core hardware modules and many software components. The first system is for production testing 10 m long cryo-assemblies containing two MQXFA quadrupole magnets for the high-luminosity upgrade of the Large Hadron Collider and the second for testing IQC conventional quadrupole magnets in support of the accelerator system at Fermilab.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Magnetic Measurements of HL-LHC AUP Cryo-Assemblies at Fermilab
Authors:
J. DiMarco,
P. Akella,
G. Ambrosio,
D. Assell,
M. Baldini,
G. Chlachidze,
S. Feher,
J. Nogiec,
V. Nikolic,
S. Stoynev,
T. Strauss,
M. Tartaglia,
P. Thompson,
D. Walbridge,
W. Ghiorso,
X. Wang
Abstract:
LQXFA/B production series cryogenic assemblies are being built for the LHC upgrade by the HL-LHC Accelerator Upgrade Project (AUP). These contain a pair of MQXFA quadrupole magnets combined as a cold mass within a vacuum vessel, and are to be installed in the IR regions of the LHC. The LQXFA/B are being tested at 1.9 K to assess alignment and magnetic performance at Fermilab's horizontal test faci…
▽ More
LQXFA/B production series cryogenic assemblies are being built for the LHC upgrade by the HL-LHC Accelerator Upgrade Project (AUP). These contain a pair of MQXFA quadrupole magnets combined as a cold mass within a vacuum vessel, and are to be installed in the IR regions of the LHC. The LQXFA/B are being tested at 1.9 K to assess alignment and magnetic performance at Fermilab's horizontal test facility. The ~10 m - long assembly must meet stringent specifications for quadrupole strength and harmonic field integrals determination, magnetic axis location, and for variations in axis position and local field profile. A multi-probe, PCB-based rotating coil and Single Stretched Wire system are employed for these measurements. To accurately determine rotating coil location and angles within the cold mass, a laser tracker is utilized to record multiple targets at one end of the probe. This paper describes the measurements, probes/equipment, and techniques used to perform the necessary characterization of the cold mass.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
A Quench Detection and Monitoring System for Superconducting Magnets at Fermilab
Authors:
A. Galt,
O. Al Atassi,
G. Chlachidze,
T. Cummings,
S. Feher,
A. Hocker,
S. Kotelnikov,
M. Lamm,
A. Makulski,
J. Nogiec,
D. Orris,
R. Pilipenko,
M. Tartaglia
Abstract:
A quench detection system was developed for protecting and monitoring the superconducting solenoids for the Muon-to-Electron Conversion Experiment (Mu2e) at Fermilab. The quench system was designed for a high level of dependability and long-term continuous operation. It is based on three tiers: Tier-I, FPGA-based Digital Quench Detection (DQD); Tier-II, Analog Quench Detection (AQD); and Tier-3, t…
▽ More
A quench detection system was developed for protecting and monitoring the superconducting solenoids for the Muon-to-Electron Conversion Experiment (Mu2e) at Fermilab. The quench system was designed for a high level of dependability and long-term continuous operation. It is based on three tiers: Tier-I, FPGA-based Digital Quench Detection (DQD); Tier-II, Analog Quench Detection (AQD); and Tier-3, the quench controls and data management system. The Tier-I and Tier-II are completely independent and fully redundant systems. The Tier-3 system is based on National Instruments (NI) C-RIO and provides the user interface for quench controls and data management. It is independent from Tiers I & II. The DQD provides both quench detection and quench characterization (monitoring) capability. Both DQD and AQD have built-in high voltage isolation and user programmable gains and attenuations. The DQD and AQD also includes user configured current dependent thresholding and validation times.
A 1st article of the three-tier system was fully implemented on the new Fermilab magnet test stand for the HL-LHC Accelerator Up-grade Project (AUP). It successfully provided quench protection and monitoring (QPM) for a cold superconducting bus test in November 2020. The Mu2e quench detection design has since been implemented for production testing of the AUP magnets. A detailed description of the system along with results from the AUP superconducting bus test will be presented.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
Mu2e Technical Design Report
Authors:
L. Bartoszek,
E. Barnes,
J. P. Miller,
J. Mott,
A. Palladino,
J. Quirk,
B. L. Roberts,
J. Crnkovic,
V. Polychronakos,
V. Tishchenko,
P. Yamin,
C. -h. Cheng,
B. Echenard,
K. Flood,
D. G. Hitlin,
J. H. Kim,
T. S. Miyashita,
F. C. Porter,
M. Röhrken,
J. Trevor,
R. -Y. Zhu,
E. Heckmaier,
T. I. Kang,
G. Lim,
W. Molzon
, et al. (238 additional authors not shown)
Abstract:
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the L…
▽ More
The Mu2e experiment at Fermilab will search for charged lepton flavor violation via the coherent conversion process mu- N --> e- N with a sensitivity approximately four orders of magnitude better than the current world's best limits for this process. The experiment's sensitivity offers discovery potential over a wide array of new physics models and probes mass scales well beyond the reach of the LHC. We describe herein the preliminary design of the proposed Mu2e experiment. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2 approval.
△ Less
Submitted 16 March, 2015; v1 submitted 21 January, 2015;
originally announced January 2015.
-
An XML Driven Framework for Test Control and Data Analysis
Authors:
J. M. Nogiec,
K. Trombly-Freytag,
D. Walbridge,
E. Desavouret
Abstract:
An extensible, component-based framework has been developed at Fermilab to promote software reuse and provide a common platform for developing a family of test and data analysis systems. The framework allows for configuring applications from components through the use of XML configurations. It can be easily extended by adding new components and many application independent components are already…
▽ More
An extensible, component-based framework has been developed at Fermilab to promote software reuse and provide a common platform for developing a family of test and data analysis systems. The framework allows for configuring applications from components through the use of XML configurations. It can be easily extended by adding new components and many application independent components are already provided with the framework. The core of the system has been developed in Java which guarantees its portability and facilitates the use of object-oriented development technologies.
△ Less
Submitted 12 November, 2001; v1 submitted 9 November, 2001;
originally announced November 2001.
-
Distributed Power Supply Control and Monitoring System
Authors:
J. M. Nogiec,
E. Desavouret
Abstract:
An extensible power supply control and monitoring system has been developed at Fermilab's Technical Division as a result of requirements to control and monior power supplies of various types from within many different applications. This system, deployed as a network service, provides uniform programming and user interfaces for various types of power supplies, ranging from 20A to 30kA. It allows…
▽ More
An extensible power supply control and monitoring system has been developed at Fermilab's Technical Division as a result of requirements to control and monior power supplies of various types from within many different applications. This system, deployed as a network service, provides uniform programming and user interfaces for various types of power supplies, ranging from 20A to 30kA. It allows for a concurrent multi-user access, with at most one application granted controlling capabilities at a time. Users can control and monitor the state of a power supply as well as monitor generated current by: a) sending separate requests to the service via provided C/C+ and Java APIs, b) uploading current control programs written in a specialized ramp profile description language to be interpreted by the system, c) scripting using a provided set of programs, and d) using supplied GUIs. In addition, special programs are available to monitor and log all control requests being sent to the service and to provide traces of current. Also, a graphical simulator is provided to facilitate testing of ramp profiles developed by the user.
△ Less
Submitted 7 November, 2001;
originally announced November 2001.
