-
18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector
Authors:
Omar Barrera,
Nishanth Ravi,
Kapil Saha,
Supratik Dasgupta,
Joshua Campbell,
Jack Kramer,
Eugene Kwon,
Tzu-Hsuan Hsu,
Sinwoo Cho,
Ian Anderson,
Pietro Simeoni,
Jue Hou,
Matteo Rinaldi,
Mark S. Goorsky,
Ruochen Lu
Abstract:
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator…
▽ More
This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient (k2) of 2.0%, high series quality factor (Qs) of 156, shunt quality factor (Qp) of 142, and maximum Bode quality factor (Qmax) of 210. The third-order harmonics at 59.64 GHz is also observed with k2 around 0.6% and Q around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Acoustic and Electromagnetic Co-Modeling of Piezoelectric Devices at Millimeter Wave
Authors:
Tianyi Zhang,
Yen-Wei Chang,
Omar Barrera,
Naveed Ahmed,
Jack Kramer,
Ruochen Lu
Abstract:
This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validat…
▽ More
This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validate the method, thin-film lithium niobate (LiNbO3) first-order antisymmetric (A1) mode devices are used as the testbed, achieving great agreement for both the standalone resonators and a fifth-order ladder filter. Upon further development, the reported acoustic and EM co-modeling could guide the future design of compact piezoelectric devices at mmWave and beyond.
△ Less
Submitted 20 June, 2024; v1 submitted 29 May, 2024;
originally announced May 2024.
-
2 to 16 GHz Fundamental Symmetric Mode Acoustic Resonators in Piezoelectric Thin-Film Lithium Niobate
Authors:
Vakhtang Chulukhadze,
Jack Kramer,
Tzu-Hsuan Hsu,
Omar Barrera,
Ian Anderson,
Sinwoo Cho,
Joshua Campbell,
Ruochen Lu
Abstract:
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode en…
▽ More
As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide
Authors:
Jack Kramer,
Tzu-Hsuan Hsu,
Joshua Campbell,
Ruochen Lu
Abstract:
Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome th…
▽ More
Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized.
△ Less
Submitted 13 May, 2024;
originally announced May 2024.
-
Experimental Study of Periodically Poled Piezoelectric Film Lithium Niobate Resonator at Cryogenic Temperatures
Authors:
Jack Kramer,
Omar Barrera,
Sinwoo Cho,
Vakhtang Chulukhadze,
Tzu-Hsuan Hsu,
Ruochen Lu
Abstract:
This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thic…
▽ More
This work reports the first study of periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) resonators at cryogenic temperatures. We experimentally investigate the temperature dependency of resonant frequencies and quality factor (Q) of higher-order Lamb modes up to 20 GHz between 80°K and 297°K, using a tri-layer P3F LiNbO3 resonators as the experimental platform. The supported thickness-shear Lamb modes between second-order symmetric (S2) and eleventh-order antisymmetric (A11) modes show temperature coefficients of frequency (TCF) averaging -68.8 ppm/K. Higher Q and more pronounced spurious modes are observed at lower temperatures for many modes. Upon further study, the cryogenic study will be crucial for identifying dominant loss mechanisms and origins of spurious modes in higher-order Lamb wave devices for millimeter-wave applications.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Should the choice of BOIN design parameter p.tox only depend on the target DLT rate?
Authors:
Rong Lu
Abstract:
When the early stopping parameter n.earlystop is relatively small or the cohortsize value is not optimized via simulation, it may be better to use p.tox < 1.4 * target.DLT.rate, or try out different cohort sizes, or increase n.earlystop, whichever is both feasible and provides better operating characteristics. This is because if the cohortsize was not optimized via simulation, even when n.earlysto…
▽ More
When the early stopping parameter n.earlystop is relatively small or the cohortsize value is not optimized via simulation, it may be better to use p.tox < 1.4 * target.DLT.rate, or try out different cohort sizes, or increase n.earlystop, whichever is both feasible and provides better operating characteristics. This is because if the cohortsize was not optimized via simulation, even when n.earlystop = 12, the BOIN escalation/de-escalation rules generated using p.tox = 1.4 * target.DLT.rate could be exactly the same as those calculated using p.tox > 3 * target.DLT.rate, which might not be acceptable for some pediatric trials targeting 10% DLT rate. The traditional 3+3 design stops the dose finding process when 3 patients have been treated at the current dose level, 0 DLT has been observed, and the next higher dose has already been eliminated. If additional 3 patients were required to be treated at the current dose in the situation described above, the corresponding boundary table could be generated using BOIN design with target DLT rates ranging from 18% to 29%, p.saf ranging from 8% to 26%, and p.tox ranging from 39% to 99%. To generate the boundary table of this 3+3 design variant, BOIN parameters also need to satisfy a set of conditions.
△ Less
Submitted 25 January, 2024;
originally announced March 2024.
-
Capacitive coupling study of the HERD SCD prototype: preliminary results
Authors:
Ruo-Si Lu,
Rui Qiao,
Ke Gong,
Wen-Xi Peng,
Wei-Shuai Zhang,
Dong-Ya Guo,
Jia-Ju Wei,
Yi-Ming Hu,
Jian-Hua Guo,
Qi Wu,
Peng Hu,
Xuan Liu,
Bing Lu,
Yi-Rong Zhang
Abstract:
The Silicon Charge Detector (SCD) is a subdetector of the High Energy Cosmic Radiation Detection payload. The dynamic range of the silicon microstrip detector can be extended by the capacitive coupling effect, which is related to the interstrip capacitance and the coupling capacitance. A detector prototype with several sets of parameters was designed and tested in the ion beams at the CERN Super P…
▽ More
The Silicon Charge Detector (SCD) is a subdetector of the High Energy Cosmic Radiation Detection payload. The dynamic range of the silicon microstrip detector can be extended by the capacitive coupling effect, which is related to the interstrip capacitance and the coupling capacitance. A detector prototype with several sets of parameters was designed and tested in the ion beams at the CERN Super Proton Synchrotron. The capacitive coupling fractions with readout strip and floating strip incidences were studied using the beam test data and SPICE simulation.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
23.8-GHz Acoustic Filter in Periodically Poled Piezoelectric Film Lithium Niobate With 1.52-dB IL and 19.4% FBW
Authors:
Sinwoo Cho,
Omar Barrera,
Jack Kramer,
Vakhtang Chulukhadze,
Tzu-Hsuan Hsu,
Joshua Campbell,
Ian Anderson,
Ruochen Lu
Abstract:
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y…
▽ More
This paper reports the first piezoelectric acoustic filter in periodically poled piezoelectric film (P3F) lithium niobate (LiNbO3) at 23.8 GHz with low insertion loss (IL) of 1.52 dB and 3-dB fractional bandwidth (FBW) of 19.4%. The filter features a compact footprint of 0.64 mm2. The third-order ladder filter is implemented with electrically coupled resonators in 150 nm bi-layer P3F 128 rotated Y-cut LiNbO3 thin film, operating in second-order symmetric (S2) Lamb mode. The record-breaking performance is enabled by the P3F LiNbO3 platform, where piezoelectric thin films of alternating orientations are transferred subsequently, facilitating efficient higher-order Lamb mode operation with simultaneously high quality factor (Q) and coupling coefficient (k2) at millimeter-wave (mmWave). Also, the multi-layer P3F stack promises smaller footprints and better nonlinearity than single-layer counterparts, thanks to the higher capacitance density and lower thermal resistance. Upon further development, the reported P3F LiNbO3 platform is promising for compact filters at mmWave.
△ Less
Submitted 28 June, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Dephasing of Strong-Field-Driven Floquet States Revealed by Time- and Spectrum-Resolved Quantum-Path Interferometry
Authors:
Yaxin Liu,
Bingbing Zhu,
Shicheng Jiang,
Shenyang Huang,
Mingyan Luo,
Sheng Zhang,
Hugen Yan,
Yuanbo Zhang,
Ruifeng Lu,
Zhensheng Tao
Abstract:
Floquet engineering, while a powerful tool for ultrafast quantum-state manipulation, faces challenges under strong-field conditions, as recent high harmonic generation studies unveil exceptionally short dephasing times. In this study, using time- and spectrum-resolved quantum-path interferometry, we investigate the dephasing mechanisms of terahertz-driven excitons. Our results reveal a dramatic in…
▽ More
Floquet engineering, while a powerful tool for ultrafast quantum-state manipulation, faces challenges under strong-field conditions, as recent high harmonic generation studies unveil exceptionally short dephasing times. In this study, using time- and spectrum-resolved quantum-path interferometry, we investigate the dephasing mechanisms of terahertz-driven excitons. Our results reveal a dramatic increase in exciton dephasing rate beyond a threshold field strength, indicating exciton dissociation as the primary dephasing mechanism. Importantly, we demonstrate long dephasing times of strong-field-dressed excitons, supporting coherent strong-field manipulation of quantum materials.
△ Less
Submitted 20 January, 2024; v1 submitted 16 November, 2023;
originally announced November 2023.
-
Fundamental Antisymmetric Mode Acoustic Resonator in Periodically Poled Piezoelectric Film Lithium Niobate
Authors:
Omar Barrera,
Jack Kramer,
Ryan Tetro,
Sinwoo Cho,
Vakhtang Chulukhadze,
Luca Colombo,
Ruochen Lu
Abstract:
Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature eve…
▽ More
Radio frequency (RF) acoustic resonators have long been used for signal processing and sensing. Devices that integrate acoustic resonators benefit from their slow phase velocity (vp), in the order of 3 to 10 km/s, which allows miniaturization of the device. Regarding the subject of small form factor, acoustic resonators that operate at the so-called fundamental antisymmetric mode (A0), feature even slower vp (1 to 3 km/s), which allows for smaller devices. This work reports the design and fabrication of A0 mode resonators leveraging the advantages of periodically poled piezoelectricity (P3F) lithium niobate, which includes a pair of piezoelectric layers with opposite polarizations to mitigate the charge cancellation arising from opposite stress of A0 in the top and bottom piezoelectric layers. The fabricated device shows a quality factor (Q) of 800 and an electromechanical coupling (k2) of 3.29, resulting in a high figure of merit (FoM, Q times k2) of 26.3 at the resonant frequency of 294 MHz, demonstrating the first efficient A0 device in P3F platforms. The proposed A0 platform could enable miniature signal processing, sensing, and ultrasound transducer applications upon optimization.
△ Less
Submitted 27 August, 2023;
originally announced September 2023.
-
On the Theory of Solid-State Harmonic Generation Governed by Crystal Symmetry
Authors:
Chen Qian,
Shicheng Jiang,
Tong Wu,
Hongming Weng,
Chao Yu,
Ruifeng Lu
Abstract:
The solid-state harmonic generation (SSHG) derives from photocurrent coherence. The crystal symmetry, including point-group symmetry and time-reversal symmetry, constrains the amplitude and phase of the photocurrent, thus manipulates the coherent processes in SSHG. We revisit the expression of photocurrent under the electric dipole approximation and give an unambiguous picture of non-equilibrium d…
▽ More
The solid-state harmonic generation (SSHG) derives from photocurrent coherence. The crystal symmetry, including point-group symmetry and time-reversal symmetry, constrains the amplitude and phase of the photocurrent, thus manipulates the coherent processes in SSHG. We revisit the expression of photocurrent under the electric dipole approximation and give an unambiguous picture of non-equilibrium dynamics of photocarriers on laser-dressed effective bands. In addition to the dynamical phase, we reveal the indispensable roles of the phase difference of transition dipole moments and the phase induced by shift vector in the photocurrent coherence. Microscopic mechanism of the selection rule, orientation dependence, polarization characteristics, time-frequency analysis and ellipticity dependence of harmonics governed by symmetries is uniformly clarified in our theoretical framework. This work integrates non-equilibrium electronic dynamics of condensed matter in strong laser fields, and paves a way to explore more nonlinear optical phenomena governed by crystal symmetry.
△ Less
Submitted 16 January, 2024; v1 submitted 20 April, 2023;
originally announced April 2023.
-
Evolution of the number and temperature of the remaining cold atoms in CW-laser photoionization of laser-cooled $^{87}$Rb atoms
Authors:
Fei Wang,
Feng-Dong Jia,
Wei-Chen Liang,
Xiao-Kang Li,
Yu-Han Wang,
Jing-Yu Qian,
Dian-Cheng Zhang,
Yong Wu,
Jian-Guo Wang,
Rong-Hua Lu,
Xiang-Yuan Xu,
Ya-Ping Ruan,
Ping Xue,
Zhi-Ping Zhong
Abstract:
Based on the Rb$^+$-Rb hybrid trap, we investigate the effect of ion-atom elastic collisions on the number and temperature of the remaining atoms. We measured the remaining atomic number and temperature as a function of the wavelength and intensity of the ionization laser, and whether the ion trap was turned on. Fittings with a single exponential decay function plus an offset to the number and rad…
▽ More
Based on the Rb$^+$-Rb hybrid trap, we investigate the effect of ion-atom elastic collisions on the number and temperature of the remaining atoms. We measured the remaining atomic number and temperature as a function of the wavelength and intensity of the ionization laser, and whether the ion trap was turned on. Fittings with a single exponential decay function plus an offset to the number and radius of the remaining atoms are found to be in good agreement. We found a difference in the exponential factor of different wavelengths of ionization laser with the ion trap on or off. We suppose that the presence of electrons affects ion-atom collisions through disorder-induced heating. Our research contributes to a better understanding of how ultracold neutral plasma evolves, particularly the subsequent kinetics of atomic processes, which also serves as a useful reference for high-energy-density plasma.
△ Less
Submitted 21 March, 2023; v1 submitted 18 March, 2023;
originally announced March 2023.
-
Nanoscale Imaging of Super-High-Frequency Microelectromechanical Resonators with Femtometer Sensitivity
Authors:
Daehun Lee,
Shahin Jahanbani,
Jack Kramer,
Ruochen Lu,
Keji Lai
Abstract:
Implementing microelectromechanical system (MEMS) resonators calls for detailed microscopic understanding of the devices, such as energy dissipation channels, spurious modes, and imperfections from microfabrication. Here, we report the nanoscale imaging of a freestanding super-high-frequency (3 ~ 30 GHz) lateral overtone bulk acoustic resonator with unprecedented spatial resolution and displacemen…
▽ More
Implementing microelectromechanical system (MEMS) resonators calls for detailed microscopic understanding of the devices, such as energy dissipation channels, spurious modes, and imperfections from microfabrication. Here, we report the nanoscale imaging of a freestanding super-high-frequency (3 ~ 30 GHz) lateral overtone bulk acoustic resonator with unprecedented spatial resolution and displacement sensitivity. Using transmission-mode microwave impedance microscopy, we have visualized mode profiles of individual overtones and analyzed higher-order transverse spurious modes and anchor loss. The integrated TMIM signals are in good agreement with the stored mechanical energy in the resonator. Quantitative analysis with finite-element modeling shows that the noise floor is equivalent to an in-plane displacement of 10 fm/sqrt(Hz) at room temperatures, which can be further improved under cryogenic environments. Our work contributes to the design and characterization of MEMS resonators with better performance for telecommunication, sensing, and quantum information science applications.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Performance of the CMS High Granularity Calorimeter prototype to charged pion beams of 20$-$300 GeV/c
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
J. P. Figueiredo de sa Sousa de Almeida,
P. G. Dias de Almeida,
A. Alpana,
M. Alyari,
I. Andreev,
U. Aras,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Banerjee,
P. DeBarbaro,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (435 additional authors not shown)
Abstract:
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing med…
▽ More
The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.
△ Less
Submitted 27 May, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Catching the geometric phase effect around conical intersection in molecules by high order harmonic spectroscopy
Authors:
Guanglu Yuan,
Ruifeng Lu,
Shicheng Jiang,
Konstantin Dorfman
Abstract:
Nonadiabatic dynamics around an avoid crossing or a conical intersection play a crucial role in the photoinduced processes of most polyatomic molecules. The present work shows that the topological phase in conical intersection makes the behavior of pump-probe high-order harmonic spectroscopy different from the case of avoid crossing. The coherence built up when the system crosses the avoid crossin…
▽ More
Nonadiabatic dynamics around an avoid crossing or a conical intersection play a crucial role in the photoinduced processes of most polyatomic molecules. The present work shows that the topological phase in conical intersection makes the behavior of pump-probe high-order harmonic spectroscopy different from the case of avoid crossing. The coherence built up when the system crosses the avoid crossing will lead to the oscillatory behavior of the spectrum, while the geometric phase erodes these oscillations in the case of conical intersection. Additionally, the dynamical blueshift and the splitting of time-resolved spectrum allow capturing the snapshot dynamics with sub-femtosecond resolution.
△ Less
Submitted 30 October, 2022;
originally announced October 2022.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 20 July, 2024; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will…
▽ More
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.
△ Less
Submitted 23 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Exclusive J/$ψ$ Detection and Physics with ECCE
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the…
▽ More
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider
Authors:
F. Bock,
N. Schmidt,
P. K. Wang,
N. Santiesteban,
T. Horn,
J. Huang,
J. Lajoie,
C. Munoz Camacho,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (263 additional authors not shown)
Abstract:
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key…
▽ More
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider
Authors:
C. Fanelli,
Z. Papandreou,
K. Suresh,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann
, et al. (258 additional authors not shown)
Abstract:
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to…
▽ More
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.
△ Less
Submitted 19 May, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider
Authors:
J. C. Bernauer,
C. T. Dean,
C. Fanelli,
J. Huang,
K. Kauder,
D. Lawrence,
J. D. Osborn,
C. Paus,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (256 additional authors not shown)
Abstract:
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes…
▽ More
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Real spectra and phase transition of skin effect in nonreciprocal systems
Authors:
Qi-Bo Zeng,
Rong Lü
Abstract:
We study the one-dimensional nonreciprocal lattices with real nearest neighboring hopping and find that the energy spectra under open boundary conditions can be entirely real or imaginary. We further investigate the spectral properties and the non-Hermitian skin effect in the one-dimensional mosaic lattices with real nonreciprocal hopping introduced at equally spaced sites. The eigenenergies of su…
▽ More
We study the one-dimensional nonreciprocal lattices with real nearest neighboring hopping and find that the energy spectra under open boundary conditions can be entirely real or imaginary. We further investigate the spectral properties and the non-Hermitian skin effect in the one-dimensional mosaic lattices with real nonreciprocal hopping introduced at equally spaced sites. The eigenenergies of such lattices undergo a real-complex-imaginary or real-complex transition as the nonreciprocity varies. Moreover, the skin effect exhibits phase transitions depending on the period of the mosaic nonreciprocity. The bulk states are abruptly shifted from one end of the lattice to the opposite one by crossing the critical points, accompanied by the closing and reopening of point gaps in the spectra under periodic boundary conditions. The phase diagrams of the transition are presented and the critical boundaries are analytically determined. Our work unveils the intriguing properties of the energy spectrum and skin effect in non-Hermitian systems.
△ Less
Submitted 13 June, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Solid-like high harmonic generation from rotationally periodic systems
Authors:
Yigeng Peng,
Tong Wu,
Guanglu Yuan,
Lihan Chi,
Chao Yu,
Ruifeng Lu
Abstract:
High harmonic generation (HHG) from crystals in strong laser fields has been understood by the band theory of solid, which is based on the periodic boundary condition (PBC) of translational invariant. For systems having PBC of rotational invariant, in principles an analogous Bloch theorem can be developed and applied. Taking a ring-type cluster of cyclo[18]carbon as a representative, we theoretica…
▽ More
High harmonic generation (HHG) from crystals in strong laser fields has been understood by the band theory of solid, which is based on the periodic boundary condition (PBC) of translational invariant. For systems having PBC of rotational invariant, in principles an analogous Bloch theorem can be developed and applied. Taking a ring-type cluster of cyclo[18]carbon as a representative, we theoretically suggest a quasi-band model and study its HHG by solving time-dependent Liouville-von Neumann equation. Under the irradiation of circularly polarized laser, explicit selection rules for left-handed and right-handed harmonics are observed, while in linearly polarized laser field, cyclo[18]carbon exhibits solid-like HHG originated from intra-band oscillations and inter-band transitions, which in turn is promising to optically detect the symmetry and geometry of controversial structures. In a sense, this work presents a connection linking the high harmonics of gases and solids.
△ Less
Submitted 24 January, 2022; v1 submitted 18 January, 2022;
originally announced January 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
The Role of Shift Vector in High-Harmonic Generation from Non-Centrosymmetric Topological Insulators under Strong Laser Fields
Authors:
Chen Qian,
Chao Yu,
Shicheng Jiang,
Tan Zhang,
Jiacheng Gao,
Shang Shi,
Hanqi Pi,
Hongming Weng,
Ruifeng Lu
Abstract:
As a promising avenue to obtain new extreme ultraviolet light source and detect electronic properties, high-harmonic generation (HHG) has been actively developed in both theory and experiment. In solids lacking inversion symmetry, when electrons undergo a nonadiabatic transition, a directional charge shift occurs and is characterized by shift vector, which measures the real-space shift of the phot…
▽ More
As a promising avenue to obtain new extreme ultraviolet light source and detect electronic properties, high-harmonic generation (HHG) has been actively developed in both theory and experiment. In solids lacking inversion symmetry, when electrons undergo a nonadiabatic transition, a directional charge shift occurs and is characterized by shift vector, which measures the real-space shift of the photoexcited electron and hole. For the first time, we have revealed that shift vector plays prominent roles in the real-space tunneling mechanism of three-step model for electrons under strong laser fields. Since shift vector is determined by the topological properties of related wave functions, we expect HHG with its contribution can provide direct knowledge on the band topology in noncentrosymmetric topological insulators (TIs). In both Kane-Mele model and realistic material BiTeI, we have found that the shift vector reverses when band inversion happens during the topological phase transition between normal and topological insulators. Under oscillating strong laser fields, the reversal of shift vector leads to completely opposite radiation time of high-order harmonics. This makes HHG a feasible all-optical strong-field method to directly identify the band inversion in non-centrosymmetric TIs.
△ Less
Submitted 3 January, 2022; v1 submitted 27 June, 2021;
originally announced June 2021.
-
Temporal characterization of electron dynamics in attosecond XUV and infrared laser fields
Authors:
L. Guo,
Y. Jia,
M. Q. Liu,
X. Y. Jia,
S. L. Hu,
R. H. Lu,
S. S. Han,
J. Chen
Abstract:
We use a Wigner distribution-like function based on the strong field approximation theory to obtain the time-energy distributions and the ionization time distributions of electrons ionized by an XUV pulse alone and in the presence of an infrared (IR) pulse. In the case of a single XUV pulse, although the overall shape of the ionization time distribution resembles the XUV-envelope, its detail shows…
▽ More
We use a Wigner distribution-like function based on the strong field approximation theory to obtain the time-energy distributions and the ionization time distributions of electrons ionized by an XUV pulse alone and in the presence of an infrared (IR) pulse. In the case of a single XUV pulse, although the overall shape of the ionization time distribution resembles the XUV-envelope, its detail shows dependence on the emission direction of the electron and the carrier-envelope phase of the pulse, which mainly results from the low-energy interference structure. It is further found that the electron from the counter-rotating term plays an important role in the interference. In the case of the two-color pulse, both the time-energy distributions and the ionization time distributions change with varying IR field. Our analysis demonstrates that the IR field not only modifies the final electron kinetic energy but also changes the electron's emission time, which results from the change of the electric field induced by the IR pulse. Moreover, the ionization time distributions of the photoelectrons emitted from atoms with higher ionization energy are also given, which show less impact of the IR field on the electron dynamics.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Real-Time Likelihood-Free Inference of Roman Binary Microlensing Events with Amortized Neural Posterior Estimation
Authors:
Keming Zhang,
Joshua S. Bloom,
B. Scott Gaudi,
Francois Lanusse,
Casey Lam,
Jessica R. Lu
Abstract:
Fast and automated inference of binary-lens, single-source (2L1S) microlensing events with sampling-based Bayesian algorithms (e.g., Markov Chain Monte Carlo; MCMC) is challenged on two fronts: high computational cost of likelihood evaluations with microlensing simulation codes, and a pathological parameter space where the negative-log-likelihood surface can contain a multitude of local minima tha…
▽ More
Fast and automated inference of binary-lens, single-source (2L1S) microlensing events with sampling-based Bayesian algorithms (e.g., Markov Chain Monte Carlo; MCMC) is challenged on two fronts: high computational cost of likelihood evaluations with microlensing simulation codes, and a pathological parameter space where the negative-log-likelihood surface can contain a multitude of local minima that are narrow and deep. Analysis of 2L1S events usually involves grid searches over some parameters to locate approximate solutions as a prerequisite to posterior sampling, an expensive process that often requires human-in-the-loop domain expertise. As the next-generation, space-based microlensing survey with the Roman Space Telescope is expected to yield thousands of binary microlensing events, a new fast and automated method is desirable. Here, we present a likelihood-free inference (LFI) approach named amortized neural posterior estimation, where a neural density estimator (NDE) learns a surrogate posterior $\hat{p}(θ|x)$ as an observation-parametrized conditional probability distribution, from pre-computed simulations over the full prior space. Trained on 291,012 simulated Roman-like 2L1S simulations, the NDE produces accurate and precise posteriors within seconds for any observation within the prior support without requiring a domain expert in the loop, thus allowing for real-time and automated inference. We show that the NDE also captures expected posterior degeneracies. The NDE posterior could then be refined into the exact posterior with a downstream MCMC sampler with minimal burn-in steps.
△ Less
Submitted 30 March, 2021; v1 submitted 10 February, 2021;
originally announced February 2021.
-
Construction and On-site Performance of the LHAASO WFCTA Camera
Authors:
F. Aharonian,
Q. An,
Axikegu,
L. X. Bai,
Y. X. Bai,
Y. W. Bao,
D. Bastieri,
X. J. Bi,
Y. J. Bi,
H. Cai,
J. T. Cai,
Z. Cao,
Z. Cao,
J. Chang,
J. F. Chang,
X. C. Chang,
B. M. Chen,
J. Chen,
L. Chen,
L. Chen,
L. Chen,
M. J. Chen,
M. L. Chen,
Q. H. Chen,
S. H. Chen
, et al. (234 additional authors not shown)
Abstract:
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this…
▽ More
The focal plane camera is the core component of the Wide Field-of-view Cherenkov/fluorescence Telescope Array (WFCTA) of the Large High-Altitude Air Shower Observatory (LHAASO). Because of the capability of working under moonlight without aging, silicon photomultipliers (SiPM) have been proven to be not only an alternative but also an improvement to conventional photomultiplier tubes (PMT) in this application. Eighteen SiPM-based cameras with square light funnels have been built for WFCTA. The telescopes have collected more than 100 million cosmic ray events and preliminary results indicate that these cameras are capable of working under moonlight. The characteristics of the light funnels and SiPMs pose challenges (e.g. dynamic range, dark count rate, assembly techniques). In this paper, we present the design features, manufacturing techniques and performances of these cameras. Finally, the test facilities, the test methods and results of SiPMs in the cameras are reported here.
△ Less
Submitted 4 July, 2021; v1 submitted 29 December, 2020;
originally announced December 2020.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
A Reanalysis of Public Galactic Bulge Gravitational Microlensing Events from OGLE-III and IV
Authors:
Nathan Golovich,
William A. Dawson,
Fran Bartolić,
Casey Y. Lam,
Jessica R. Lu,
Michael S. Medford,
Michael D. Schneider,
George Chapline,
Edward F. Schlafly,
Alex Drlica-Wagner,
Kerianne Pruett
Abstract:
Modern surveys of gravitational microlensing events have progressed to detecting thousands per year. Surveys are capable of probing Galactic structure, stellar evolution, lens populations, black hole physics, and the nature of dark matter. One of the key avenues for doing this is studying the microlensing Einstein radius crossing time distribution ($t_E$). However, systematics in individual light…
▽ More
Modern surveys of gravitational microlensing events have progressed to detecting thousands per year. Surveys are capable of probing Galactic structure, stellar evolution, lens populations, black hole physics, and the nature of dark matter. One of the key avenues for doing this is studying the microlensing Einstein radius crossing time distribution ($t_E$). However, systematics in individual light curves as well as over-simplistic modeling can lead to biased results. To address this, we developed a model to simultaneously handle the microlensing parallax due to Earth's motion, systematic instrumental effects, and unlensed stellar variability with a Gaussian Process model. We used light curves for nearly 10,000 OGLE-III and IV Milky Way bulge microlensing events and fit each with our model. We also developed a forward model approach to infer the timescale distribution by forward modeling from the data rather than using point estimates from individual events. We find that modeling the variability in the baseline removes a source of significant bias in individual events, and previous analyses over-estimated the number of long timescale ($t_E>100$ days) events due to their over simplistic models ignoring parallax effects and stellar variability. We use our fits to identify hundreds of events that are likely black holes.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Generalized Perfect Optical Vortex along Arbitrary Trajectories
Authors:
Yue Chen,
Tingchang Wang,
Yuxuan Ren,
Zhaoxiang Fang,
Guangrui Ding,
Liqun He,
Rongde Lu,
Kun Huang
Abstract:
Perfect optical vortex (POV) is a type of vortex beam with an infinite thin ring and a fixed radius independent of its topological charge. Here we propose the concept of generalized perfect optical vortex along arbitrary curves beyond the regular shapes of circle and ellipse. Generalized perfect optical vortices also share the similar properties as POVs, such as defined only along infinite thin cu…
▽ More
Perfect optical vortex (POV) is a type of vortex beam with an infinite thin ring and a fixed radius independent of its topological charge. Here we propose the concept of generalized perfect optical vortex along arbitrary curves beyond the regular shapes of circle and ellipse. Generalized perfect optical vortices also share the similar properties as POVs, such as defined only along infinite thin curves and owning topological charges independent of scales. Notably, they naturally degenerate to the POVs and elliptic POVs along circles and ellipses, respectively. We also experimentally generated the generalized perfect optical vortices through a digital micromirror device (DMD) and measured the phase distributions by interferometry, exhibiting good agreements with the simulations. Moreover, we derive a proper modified formula to yield the generalized perfect optical vortices with uniform intensity distribution along predesigned curves. The generalized perfect optical vortices might find the potential applications in optical tweezers and communication.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Electron-Backscattering-Assisted High Harmonic Generation from Bilayer Nanostructures
Authors:
Chao Yu,
Shicheng Jiang,
Tong Wu,
Guanglu Yuan,
Yigeng Peng,
Cheng Jin,
Ruifeng Lu
Abstract:
In the framework of time-dependent density functional theory, we obtain high-order harmonics of photon energies up to 10 Up from bilayer crystals with an interlayer spacing d = 70 Å. At grazing incidence, a clear double-plateau structure is observed in the harmonic spectrum. The photon energy of the second plateau far beyond atomic-like harmonics can be well explained by the inclusion of backscatt…
▽ More
In the framework of time-dependent density functional theory, we obtain high-order harmonics of photon energies up to 10 Up from bilayer crystals with an interlayer spacing d = 70 Å. At grazing incidence, a clear double-plateau structure is observed in the harmonic spectrum. The photon energy of the second plateau far beyond atomic-like harmonics can be well explained by the inclusion of backscattering of ionized electrons. Ab initio simulations reveal that the cutoff of the second plateau is continuously extended with an increasing d. Our classical calculations predict that the maximum electronic kinetic energy is linearly dependent on d over a wide range. Moreover, the harmonic yield in the second plateau is significantly enhanced by increases in the wavelength of the driving laser. Owing to the confined spreading of the electronic wave packet, a beneficial wavelength scaling of λ2.85 is obtained. This study therefore establishes a novel and efficient way of producing high-energy light source based on layered nanostructures.
△ Less
Submitted 30 September, 2020; v1 submitted 1 June, 2020;
originally announced June 2020.
-
Search for a Variation of the Fine Structure around the Supermassive Black Hole in Our Galactic Center
Authors:
A. Hees,
T. Do,
B. M. Roberts,
A. M. Ghez,
S. Nishiyama,
R. O. Bentley,
A. K. Gautam,
S. Jia,
T. Kara,
J. R. Lu,
H. Saida,
S. Sakai,
M. Takahashi,
Y. Takamori
Abstract:
Searching for space-time variations of the constants of Nature is a promising way to search for new physics beyond General Relativity and the standard model motivated by unification theories and models of dark matter and dark energy. We propose a new way to search for a variation of the fine-structure constant using measurements of late-type evolved giant stars from the S-star cluster orbiting the…
▽ More
Searching for space-time variations of the constants of Nature is a promising way to search for new physics beyond General Relativity and the standard model motivated by unification theories and models of dark matter and dark energy. We propose a new way to search for a variation of the fine-structure constant using measurements of late-type evolved giant stars from the S-star cluster orbiting the supermassive black hole in our Galactic Center. A measurement of the difference between distinct absorption lines (with different sensitivity to the fine structure constant) from a star leads to a direct estimate of a variation of the fine structure constant between the star's location and Earth. Using spectroscopic measurements of 5 stars, we obtain a constraint on the relative variation of the fine structure constant below $10^{-5}$. This is the first time a varying constant of Nature is searched for around a black hole and in a high gravitational potential. This analysis shows new ways the monitoring of stars in the Galactic Center can be used to probe fundamental physics.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Ghost imaging based on Y-net: a dynamic coding and conjugate-decoding approach
Authors:
Ruiguo Zhu,
Hong Yu,
Zhijie Tan,
Ronghua Lu,
Shensheng Han,
Zengfeng Huang,
Jian Wang
Abstract:
Ghost imaging incorporating deep learning technology has recently attracted much attention in the optical imaging field. However, deterministic illumination and multiple exposure are still essential in most scenarios. Here we propose a ghost imaging scheme based on a novel conjugate-decoding deep learning framework (Y-net), which works well under both deterministic and indeterministic illumination…
▽ More
Ghost imaging incorporating deep learning technology has recently attracted much attention in the optical imaging field. However, deterministic illumination and multiple exposure are still essential in most scenarios. Here we propose a ghost imaging scheme based on a novel conjugate-decoding deep learning framework (Y-net), which works well under both deterministic and indeterministic illumination. Benefited from the end-to-end characteristic of our network, the image of a sample can be achieved directly from a pair of correlated speckles collected by the detectors, and the sample is illuminated only once in the experiment. The spatial distribution of the speckles encoding the sample in the experiment can be completely different from that of the simulation speckles for training, as long as the statistical characteristics of the speckles remain unchanged. This approach is particularly important to high-resolution x-ray ghost imaging applications due to its potential for improving image quality and reducing radiation damage. And the idea of conjugate-decoding network may also be applied to other learning-based imaging
△ Less
Submitted 11 February, 2020; v1 submitted 10 February, 2020;
originally announced February 2020.
-
How to obtain complex transition dipole moments satisfying crystal symmetry and periodicity from ab-initio calculations
Authors:
Shicheng Jiang,
Chao Yu,
Jigen Chen,
Yanwei Huang,
R. F. Lu,
C. D. Lin
Abstract:
Transition dipole moments (TDM) between energy bands of solids deserve special attention nowadays as intense lasers can easily drive non-adiabatic transitions of excited electron wave packets across the Brillouin zones. The TDM is required to be continuous, satisfying crystal symmetry, and periodic at zone boundaries. While present day ab-initio algorithms are powerful in calculating band structur…
▽ More
Transition dipole moments (TDM) between energy bands of solids deserve special attention nowadays as intense lasers can easily drive non-adiabatic transitions of excited electron wave packets across the Brillouin zones. The TDM is required to be continuous, satisfying crystal symmetry, and periodic at zone boundaries. While present day ab-initio algorithms are powerful in calculating band structures of solids, they all introduced random phases into the eigenfunctions at each crystal momentum k. In this paper, we show how to choose a ``smooth-periodic'' gauge where TDMs can be smooth versus k, preserving crystal symmetry, as well as maintaining periodic at zone boundaries. Based on band structure and TDMs in the ``smooth-periodic'' gauge calculated from ab-initio algorithms, we revisit high-order harmonic generation from MgO which exhibits inversion symmetry and ZnO which has broken symmetry. The symmetry properties of TDMs with respect to k ensure the absence of even-order harmonics in system with inversion symmetry, while the TDM in the `smooth-periodic'' gauge for ZnO is shown to enhance even harmonics that were underestimated in previous simulations. These results reveal the importance of correctly treating the complex TDMs in nonlinear laser-solid interactions which has been elusive so far.
△ Less
Submitted 6 March, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
A Laterally Vibrating Lithium Niobate MEMS Resonator Array Operating at 500°C in Air
Authors:
Savannah R. Benbrook,
Caitlin A. Chapin,
Ruochen Lu,
Yansong Yang,
Songbin Gong,
Debbie G. Senesky
Abstract:
This paper is the first report of the high-temperature characteristics of a laterally vibrating piezoelectric lithium niobate (LiNbO$_{3}$) MEMS resonator array up to 500°C in air. After a high-temperature burn-in treatment, device quality factor (Q) is enhanced to 508 and the resonance shifts to a lower frequency and remains stable up to 500°C. During subsequent in situ high-temperature testing,…
▽ More
This paper is the first report of the high-temperature characteristics of a laterally vibrating piezoelectric lithium niobate (LiNbO$_{3}$) MEMS resonator array up to 500°C in air. After a high-temperature burn-in treatment, device quality factor (Q) is enhanced to 508 and the resonance shifts to a lower frequency and remains stable up to 500°C. During subsequent in situ high-temperature testing, the resonant frequencies of two coupled shear horizontal (SH0) modes in the array are 87.36 MHz and 87.21 MHz at 25°C and 84.56 MHz and 84.39 MHz at 500°C, correspondingly, representing a -3% shift in frequency over the temperature range. Upon cooling to room temperature, the resonant frequency returns to 87.36 MHz, demonstrating recoverability of device performance. The first- and second-order temperature coefficient of frequency (TCF) are found to be -95.27 ppm/°C and 57.5 ppb/°C$^{2}$ for resonant mode A, and -95.43 ppm/°C and 55.8 ppb/°C$^{2}$ for resonant mode B, respectively. The temperature-dependent quality factor (Q) and electromechanical coupling coefficient ($k_{t}^{2}$) are extracted and reported. Device Q decreases to 334 after high-temperature exposure, while $k_{t}^{2}$ increases to 12.40%. This work supports the use of piezoelectric LiNbO$_{3}$ as a material platform for harsh environment radio-frequency (RF) resonant sensors (e.g. temperature and infrared).
△ Less
Submitted 11 December, 2019; v1 submitted 22 November, 2019;
originally announced November 2019.
-
Crystal Symmetry and Polarization of High-order Harmonics in ZnO
Authors:
Shicheng Jiang,
Shima Gholam-Mirzaei,
Erin Crites,
John E. Beetar,
Mamta Singh,
Ruifeng Lu,
Michael Chini,
C. D. Lin
Abstract:
We carried out a joint theoretical and experimental study of the polarization of high-order harmonics generated from ZnO by intense infrared laser pulses. Experimentally we found that the dependence of parallel and perpendicular polarizations on the crystal orientation for all odd harmonics are nearly identical, but they are quite different from even harmonics which also show little order dependen…
▽ More
We carried out a joint theoretical and experimental study of the polarization of high-order harmonics generated from ZnO by intense infrared laser pulses. Experimentally we found that the dependence of parallel and perpendicular polarizations on the crystal orientation for all odd harmonics are nearly identical, but they are quite different from even harmonics which also show little order dependence. A one-dimensional two-band model, combined with a linear coupled excitation model, is shown to be able to explain the observed polarization behavior, including low-order harmonics. We further note that the same odd/even order contrast have been reported in a number of other crystals, despite that the harmonics were perceived to be generated via entirely different mechanisms. We demonstrated that this universality is governed by crystal symmetry, not by specific mechanisms. Thus, polarization measurements of harmonics offers a powerful pure optical method for determining the crystal axes as well as monitoring their ultrafast changes when crystals are undergoing deformation. In addition, the ellipticity of harmonic has been studied. It shows that ellipticity of high-order harmonics from solids can be tuned precisely by changing the bond structure of the sample.
△ Less
Submitted 12 August, 2019;
originally announced August 2019.
-
5-GHz Antisymmetric Mode Acoustic Delay Lines in Lithium Niobate Thin Film
Authors:
Ruochen Lu,
Yansong Yang,
Ming-Huang Li,
Michael Breen,
Songbin Gong
Abstract:
We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works with similar feature sizes, because of its simultaneously fast phase velocity, large coupling coefficient, and low-loss. In this work, the propagation characte…
▽ More
We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works with similar feature sizes, because of its simultaneously fast phase velocity, large coupling coefficient, and low-loss. In this work, the propagation characteristics of the A1 mode in lithium niobate is analytically modeled and validated with finite element analysis. The design space of A1 ADLs is then investigated, including both the fundamental design parameters and those introduced from the practical implementation. The implemented ADLs at 5 GHz show a minimum insertion loss of 7.94 dB, an average IL of 9.1 dB, and a fractional bandwidth around 4%, with delays ranging between 15 ns to 109 ns and the center frequencies between 4.5 GHz and 5.25 GHz. The propagation characteristics of A1 mode acoustic waves have also been extracted for the first time. The A1 ADL platform can potentially enable wide-band high-frequency passive signal processing functions for future 5G applications in the sub-6 GHz spectrum bands.
△ Less
Submitted 12 October, 2019; v1 submitted 29 July, 2019;
originally announced July 2019.
-
Accuracy of the semiclassical picture of photoionization in intense laser fields
Authors:
Li Guo,
Shilin Hu,
Mingqing Liu,
Zheng Shu,
Xiwang Liu,
Jie Li,
Weifeng Yang,
Ronghua Lu,
Shensheng Han,
Jing Chen
Abstract:
In the semiclassical picture of photoionization process in intense laser fields, the ionization rate solely depends on the amplitude of the electric field and the final photoelectron momentum corresponds to the instant of ionization of the photoelectron, however, this picture has never been checked rigorously. Recently an attosecond angular streaking technique based on this semiclassical perspecti…
▽ More
In the semiclassical picture of photoionization process in intense laser fields, the ionization rate solely depends on the amplitude of the electric field and the final photoelectron momentum corresponds to the instant of ionization of the photoelectron, however, this picture has never been checked rigorously. Recently an attosecond angular streaking technique based on this semiclassical perspective has been widely applied to temporal measurement of the atomic and molecular dynamics in intense laser fields. We use a Wigner-distribution-like function to calculate the time-emission angle distribution, angular distribution and ionization time distribution for atomic ionization process in elliptically polarized few-cycle laser fields. By comparing with semiclassical calculations, we find that the two methods always show discrepancies except in some specific cases and the offset angles are generally not consistent with the offset times of the ionization time distributions obtained by the two methods even when the non-adiabatic effect is taken into account, indicating that the "attoclock" technique is in principle inaccurate. Moreover, calculations for linearly polarized laser fields also show similar discrepancies between two methods in the ionization time distribution. Our analysis indicates that the discrepancy between the semiclassical and quantum calculations can be attributed to correlation, i. e., temporal nonlocalization effect.
△ Less
Submitted 8 May, 2019; v1 submitted 1 May, 2019;
originally announced May 2019.
-
Toward Ka Band Acoustics: Lithium Niobate Asymmetrical Mode Piezoelectric MEMS Resonators
Authors:
Yansong Yang,
Ruochen Lu,
Tomas Manzaneque,
Songbin Gong
Abstract:
This work presents a new class of micro-electro-mechanical system (MEMS) resonators toward Ka band (26.5-40GHz) for fifth-generation (5G) wireless communication. Resonant frequencies of 21.4 and 29.9 GHz have been achieved using the fifth and seventh order asymmetric (A5 and A7) Lamb-wave modes in a suspended Z-cut lithium niobate (LiNbO3) thin film. The fabricated device has demonstrated an elect…
▽ More
This work presents a new class of micro-electro-mechanical system (MEMS) resonators toward Ka band (26.5-40GHz) for fifth-generation (5G) wireless communication. Resonant frequencies of 21.4 and 29.9 GHz have been achieved using the fifth and seventh order asymmetric (A5 and A7) Lamb-wave modes in a suspended Z-cut lithium niobate (LiNbO3) thin film. The fabricated device has demonstrated an electromechanical coupling (kt2) of 1.5% and 0.94% and extracted mechanical Qs of 406 and 474 for A5 and A7 respectively. The quality factors are the highest reported for piezoelectric MEMS resonators operating at this frequency range. The demonstrated performance has shown the strong potential of LiNbO3 asymmetric mode devices to meet the front-end filtering requirements of 5G.
△ Less
Submitted 28 May, 2018;
originally announced May 2018.
-
Seasonal forecasts of the summer 2016 Yangtze River basin rainfall
Authors:
Philip E. Bett,
Adam A. Scaife,
Chaofan Li,
Chris Hewitt,
Nicola Golding,
Peiqun Zhang,
Nick Dunstone,
Doug M. Smith,
Hazel E. Thornton,
Riyu Lu,
Hong-Li Ren
Abstract:
The Yangtze River has been subject to heavy flooding throughout history, and in recent times severe floods such as those in 1998 have resulted in heavy loss of life and livelihoods. Dams along the river help to manage flood waters, and are important sources of electricity for the region. Being able to forecast high-impact events at long lead times therefore has enormous potential benefit. Recent i…
▽ More
The Yangtze River has been subject to heavy flooding throughout history, and in recent times severe floods such as those in 1998 have resulted in heavy loss of life and livelihoods. Dams along the river help to manage flood waters, and are important sources of electricity for the region. Being able to forecast high-impact events at long lead times therefore has enormous potential benefit. Recent improvements in seasonal forecasting mean that dynamical climate models can start to be used directly for operational services. The teleconnection from El Niño to Yangtze River basin rainfall meant that the strong El Niño in winter 2015/2016 provided a valuable opportunity to test the application of a dynamical forecast system.
This paper therefore presents a case study of a real time seasonal forecast for the Yangtze River basin, building on previous work demonstrating the retrospective skill of such a forecast. A simple forecasting methodology is presented, in which the forecast probabilities are derived from the historical relationship between hindcast and observations. Its performance for 2016 is discussed. The heavy rainfall in the May-June-July period was correctly forecast well in advance. August saw anomalously low rainfall, and the forecasts for the June-July-August period correctly showed closer to average levels. The forecasts contributed to the confidence of decision-makers across the Yangtze River basin. Trials of climate services such as this help to promote appropriate use of seasonal forecasts, and highlight areas for future improvements.
△ Less
Submitted 26 June, 2018; v1 submitted 24 August, 2017;
originally announced August 2017.
-
Production and decay of K-shell hollow krypton in collisions with 52 - 197 MeV/u bare xenon ions
Authors:
Caojie Shao,
Deyang Yu,
Xiaohong Cai,
Xi Chen,
Kun Ma,
Jarah Evslin,
Yingli Xue,
Wei Wang,
Yury. S. Kozhedub,
Rongchun Lu,
Zhangyong Song,
Mingwu Zhang,
Junliang Liu,
Bian Yang,
Yipan Guo,
Jianming Zhang,
Fangfang Ruan,
Yehong Wu,
Yuezhao Zhang,
Chenzhong Dong,
Ximeng Chen,
Zhihu Yang
Abstract:
X-ray spectra of K-shell hollow krypton atoms produced in single collisions with 52 - 197 MeV/u Xe54+ ions are measured in a heavy-ion storage ring equipped with an internal gas-jet target. Energy shifts of the Kα_1,2^s, Kα_1,2^(h,s), and K\b{eta}_1,3^s transitions are obtained. Thus, the average number of the spectator L-vacancies presented during the x-ray emission is deduced. From the relative…
▽ More
X-ray spectra of K-shell hollow krypton atoms produced in single collisions with 52 - 197 MeV/u Xe54+ ions are measured in a heavy-ion storage ring equipped with an internal gas-jet target. Energy shifts of the Kα_1,2^s, Kα_1,2^(h,s), and K\b{eta}_1,3^s transitions are obtained. Thus, the average number of the spectator L-vacancies presented during the x-ray emission is deduced. From the relative intensities of the Kα_1,2^s and Kα_1,2^(h,s) transitions, the ratio of K-shell hollow krypton to singly K-shell ionized atoms is determined to be 14 - 24%. In the considered collisions, the K-vacancies are mainly created by the direct ionization which cannot be calculated within the perturbation descriptions. The experimental results are compared with a relativistic coupled channel calculation performed within the independent particle approximation.
△ Less
Submitted 12 June, 2017;
originally announced June 2017.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Distribution uniformity of laser-accelerated proton beams
Authors:
J. G. Zhu,
K. Zhu,
L. Tao,
X. H. Xu,
C. Lin,
W. J. Ma,
H. Y. Lu,
Y. Y. Zhao,
Y. R. Lu,
J. E. Chen,
X. Q. Yan
Abstract:
Compared with conventional accelerators, laser plasma accelerators can generate high energy ions at a greatly reduced scale, due to their TV/m acceleration gradient. A compact laser plasma accelerator (CLAPA) has been built at the Institute of Heavy Ion Physics at Peking University. It will be used for applied research like biological irradiation, astrophysics simulations, etc. A beamline system w…
▽ More
Compared with conventional accelerators, laser plasma accelerators can generate high energy ions at a greatly reduced scale, due to their TV/m acceleration gradient. A compact laser plasma accelerator (CLAPA) has been built at the Institute of Heavy Ion Physics at Peking University. It will be used for applied research like biological irradiation, astrophysics simulations, etc. A beamline system with multiple quadrupoles and an analyzing magnet for laser-accelerated ions is proposed here. Since laser-accelerated ion beams have broad energy spectra and large angular divergence, the parameters (beam waist position in the Y direction, beam line layout, drift distance, magnet angles etc.) of the beamline system are carefully designed and optimised to obtain a radially symmetric proton distribution at the irradiation platform. Requirements of energy selection and differences in focusing or defocusing in application systems greatly influence the evolution of proton distributions. With optimal parameters, radially symmetric proton distributions can be achieved and protons with different energy spread within 5% have similar transverse areas at the experiment target.
△ Less
Submitted 14 October, 2017; v1 submitted 10 February, 2017;
originally announced February 2017.
-
Quantum-trajectory analysis for charge transfer in solid materials induced by strong laser fields
Authors:
Shicheng Jiang,
Chao Yu,
Guanglu Yuan,
Tong Wu,
Ziwen Wang,
Ruifeng Lu
Abstract:
We investigate the dependence of charge transfer on the intensity of driving laser field when SiO2 crystal is irradiated by an 800 nm laser. It is surprising that the direction of charge transfer undergoes a sudden reversal when the driving laser intensity exceeds critical values with different carrier envelope phases. By applying quantum-trajectory analysis, we find that the Bloch oscillation pla…
▽ More
We investigate the dependence of charge transfer on the intensity of driving laser field when SiO2 crystal is irradiated by an 800 nm laser. It is surprising that the direction of charge transfer undergoes a sudden reversal when the driving laser intensity exceeds critical values with different carrier envelope phases. By applying quantum-trajectory analysis, we find that the Bloch oscillation plays an important role in charge transfer in solid. Also, we study the interaction of strong laser with gallium nitride (GaN) that is widely used in optoelectronics. A pump-probe scheme is applied to control the quantum trajectories of the electrons in the conduction band. The signal of charge transfer is controlled successfully by means of theoretically proposed approach.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
-
Fourier-transform Ghost Imaging with Hard X-rays
Authors:
Hong Yu,
Ronghua Lu,
Shensheng Han,
Honglan Xie,
Guohao Du,
Tiqiao Xiao,
Daming Zhu
Abstract:
Knowledge gained through X-ray crystallography fostered structural determination of materials and greatly facilitated the development of modern science and technology in the past century. Atomic details of sample structures is achievable by X-ray crystallography, however, it is only applied to crystalline structures. Imaging techniques based on X-ray coherent diffraction or zone plates are capable…
▽ More
Knowledge gained through X-ray crystallography fostered structural determination of materials and greatly facilitated the development of modern science and technology in the past century. Atomic details of sample structures is achievable by X-ray crystallography, however, it is only applied to crystalline structures. Imaging techniques based on X-ray coherent diffraction or zone plates are capable of resolving the internal structure of non-crystalline materials at nanoscales, but it is still a challenge to achieve atomic resolution. Here we demonstrate a novel lensless Fourier-transform ghost imaging method with pseudo-thermal hard X-rays by measuring the second-order intensity correlation function of the light. We show that high resolution Fourier-transform diffraction pattern of a complex amplitude sample can be achieved at Fresnel region and the amplitude and phase distributions of a sample in spatial domain can be retrieved successfully. The method of lensless X-ray Fourier-transform ghost imaging extends X-ray crystallography to non-crystalline samples, and its spatial resolution is limited only by the wavelength of the X-ray, thus atomic resolution should be routinely obtainable. Since highly coherent X-ray source is not required, comparing to conventional X-ray coherent diffraction imaging, the method can be implemented with laboratory X-ray sources, and it also provides a potential solution for lensless diffraction imaging with fermions, such as neutron and electron where the intensive coherent source usually is not available.
△ Less
Submitted 18 March, 2016; v1 submitted 14 March, 2016;
originally announced March 2016.
-
Nonlinear Image Formation by Optical Superlattices
Authors:
Bo Yang,
Xu-Hao Hong,
Rong-Er Lu,
Yang-Yang Yue,
Chao Zhang,
Yi-Qiang Qin,
Yong-Yuan Zhu
Abstract:
The angular spectrum theory is applied to the nonlinear harmonic generation process in optical superlattices. Several explicit and analytical structure functions are deduced to design optical superlattices for various purposes. Employing this method, nonlinear image formation is achieved during the second-harmonic generation process in a properly designed optical superlattice. This method is unive…
▽ More
The angular spectrum theory is applied to the nonlinear harmonic generation process in optical superlattices. Several explicit and analytical structure functions are deduced to design optical superlattices for various purposes. Employing this method, nonlinear image formation is achieved during the second-harmonic generation process in a properly designed optical superlattice. This method is universal for both nonlinear beam shaping and nonlinear arbitrary image formation. The theory has been experimentally validated in two-dimensional optical superlattice of LiTaO3 crystals and the results agree well with the theoretical prediction. This work not only extends the application of optical superlattices, but also opens a new area for imaging technologies.
△ Less
Submitted 23 November, 2015;
originally announced November 2015.