-
The Belle II Detector Upgrades Framework Conceptual Design Report
Authors:
H. Aihara,
A. Aloisio,
D. P. Auguste,
M. Aversano,
M. Babeluk,
S. Bahinipati,
Sw. Banerjee,
M. Barbero,
J. Baudot,
A. Beaubien,
F. Becherer,
T. Bergauer,
F. U. Bernlochner.,
V. Bertacchi,
G. Bertolone,
C. Bespin,
M. Bessner,
S. Bettarini,
A. J. Bevan,
B. Bhuyan,
M. Bona,
J. F. Bonis,
J. Borah,
F. Bosi,
R. Boudagga
, et al. (186 additional authors not shown)
Abstract:
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive wit…
▽ More
We describe the planned near-term and potential longer-term upgrades of the Belle II detector at the SuperKEKB electron-positron collider operating at the KEK laboratory in Tsukuba, Japan. These upgrades will allow increasingly sensitive searches for possible new physics beyond the Standard Model in flavor, tau, electroweak and dark sector physics that are both complementary to and competitive with the LHC and other experiments.
△ Less
Submitted 4 July, 2024; v1 submitted 26 June, 2024;
originally announced June 2024.
-
Low-lying electron energy levels in three-particle electron-muon ions $(μe Li)$, $(μe Be)$, $(μe B)$
Authors:
A. E. Dorokhov,
V. I. Korobov,
A. P. Martynenko,
F. A. Martynenko
Abstract:
The electron Lamb shift $(2P-2S)$ and the energy interval $(2S-1S)$ in muon-electron ions of lithium, beryllium, and boron have been calculated within the framework of the perturbation theory method for the fine structure constant and the electron-muon mass ratio. The corrections of the first and second orders of the perturbation theory, which include the effects of vacuum polarization, nuclear st…
▽ More
The electron Lamb shift $(2P-2S)$ and the energy interval $(2S-1S)$ in muon-electron ions of lithium, beryllium, and boron have been calculated within the framework of the perturbation theory method for the fine structure constant and the electron-muon mass ratio. The corrections of the first and second orders of the perturbation theory, which include the effects of vacuum polarization, nuclear structure and recoil, are taken into account. The obtained analytical results in perturbation theory are compared with the results of calculations within the variational approach. The obtained values for the Lamb shift $(2P-2S)$ and the interval $(2S-1S)$ can be used for comparison with future experimental data and verification of quantum electrodynamics.
△ Less
Submitted 26 January, 2021; v1 submitted 21 December, 2020;
originally announced December 2020.
-
Hyperfine structure of P states in muonic ions of lithium, beryllium and boron
Authors:
A. E. Dorokhov,
A. P. Martynenko,
F. A. Martynenko,
O. S. Sukhorukova
Abstract:
We calculate hyperfine structure intervals $ΔE^{hfs}(2P_{1/2})$ and $ΔE^{hfs}(2P_{3/2})$ for P-states in muonic ions of lithium, beryllium and boron. To construct the particle interaction operator in momentum space we use the tensor method of projection operators on states with definite quantum numbers of total atomic momentum F and total muon momentum j. We take into account vacuum polarization,…
▽ More
We calculate hyperfine structure intervals $ΔE^{hfs}(2P_{1/2})$ and $ΔE^{hfs}(2P_{3/2})$ for P-states in muonic ions of lithium, beryllium and boron. To construct the particle interaction operator in momentum space we use the tensor method of projection operators on states with definite quantum numbers of total atomic momentum F and total muon momentum j. We take into account vacuum polarization, relativistic, quadruple and structure corrections of orders $α^4$, $α^5$ and $α^6$. The obtained numerical values of hyperfine splittings can be used for a comparison with future experimental data of the CREMA collaboration.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Observations on MIMOSIS-0, the first dedicated CPS prototype for the CBM MVD
Authors:
M. Deveaux,
B. Arnoldi-Meadows,
G. Bertolone,
G. Claus,
A. Dorokhov,
M. Goffe,
A. Himmi,
K. Jaaskelainen,
P. Klaus,
M. Koziel,
F. Marx,
F. Morel,
C. Müntz,
H. Pham,
M. Specht,
I. Valin,
J. Stroth,
M. Winter
Abstract:
The Micro Vertex Detector (MVD) of the future Compressed Baryonic Matter (CBM) experiment at FAIR will have to provide a spatial precision of $\sim 5~\rm μm$ in combination with a material budget of 0.3\% - 0.5\% X$_0$ for a full detector station. Simultaneously, it will have to handle the rate and radiation load of operating the fixed target experiment at an average collision rate of 100 kHz (4 -…
▽ More
The Micro Vertex Detector (MVD) of the future Compressed Baryonic Matter (CBM) experiment at FAIR will have to provide a spatial precision of $\sim 5~\rm μm$ in combination with a material budget of 0.3\% - 0.5\% X$_0$ for a full detector station. Simultaneously, it will have to handle the rate and radiation load of operating the fixed target experiment at an average collision rate of 100 kHz (4 - 10 AGeV Au+Au collisions) or 10 MHz (up to 28 GeV p-A collisions). The harsh requirements call for a dedicated detector technology, which is the next generation CMOS Monolithic Active Pixel Sensor MIMOSIS. We report about the requirements for the sensor, introduce the design approach being followed to cope with it and show first test results from a first sensor prototype called MIMOSIS-0 .
△ Less
Submitted 12 September, 2019;
originally announced September 2019.
-
Hyperfine structure of S-states in muonic ions of lithium, beryllium and boron
Authors:
A. E. Dorokhov,
A. A. Krutov,
A. P. Martynenko,
F. A. Martynenko,
O. S. Sukhorukova
Abstract:
We make precise calculation of hyperfine structure of $S$-states in muonic ions of lithium, beryllium and boron in quantum electrodynamics. Corrections of orders $α^5$ and $α^6$ due to the vacuum polarization, nuclear structure and recoil in first and second orders of perturbation theory are taken into account. We obtain estimates of the total values of hyperfine splittings which can be used for a…
▽ More
We make precise calculation of hyperfine structure of $S$-states in muonic ions of lithium, beryllium and boron in quantum electrodynamics. Corrections of orders $α^5$ and $α^6$ due to the vacuum polarization, nuclear structure and recoil in first and second orders of perturbation theory are taken into account. We obtain estimates of the total values of hyperfine splittings which can be used for a comparison with future experimental data.
△ Less
Submitted 2 September, 2018; v1 submitted 21 August, 2018;
originally announced August 2018.
-
Corrections of two-photon interactions in the fine and hyperfine structure of the P-energy levels of muonic hydrogen
Authors:
A. E. Dorokhov,
N. I. Kochelev,
A. P. Martynenko,
F. A. Martynenko,
A. E. Radzhabov
Abstract:
In the framework of the quasipotential method in quantum electrodynamics we calculate corrections to the nuclear structure proportional to $r_N^2$ from two-photon exchange amplitudes in the fine and hyperfine structure of P-states in muonic hydrogen, as well as the photon-photon interaction amplitudes, leading to the exchange of the axial vector meson. In constructing the quasipotential of the muo…
▽ More
In the framework of the quasipotential method in quantum electrodynamics we calculate corrections to the nuclear structure proportional to $r_N^2$ from two-photon exchange amplitudes in the fine and hyperfine structure of P-states in muonic hydrogen, as well as the photon-photon interaction amplitudes, leading to the exchange of the axial vector meson. In constructing the quasipotential of the muon-nucleus interaction, we use the method of projection operators on states of two particles with a definite spin and total angular momentum. Analytical calculation of the matrix elements is performed and contributions to the fine and hyperfine structure of the $2P_{1/2}$ and $2P_{3/2}$ levels are obtained.
△ Less
Submitted 9 July, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.
-
The contribution of axial-vector mesons to hyperfine structure of muonic hydrogen
Authors:
A. E. Dorokhov,
N. I. Kochelev,
A. P. Martynenko,
F. A. Martynenko,
A. E. Radzhabov
Abstract:
The contribution from the axial-vector meson exchange to the potential of the muon-proton interaction in muonic hydrogen induced by anomalous axial-vector meson coupling to two photon state is calculated. It is shown that such contribution to the hyperfine splitting in muonic hydrogen is large and important for a comparison with precise experimental data. In the light of our result, the proton rad…
▽ More
The contribution from the axial-vector meson exchange to the potential of the muon-proton interaction in muonic hydrogen induced by anomalous axial-vector meson coupling to two photon state is calculated. It is shown that such contribution to the hyperfine splitting in muonic hydrogen is large and important for a comparison with precise experimental data. In the light of our result, the proton radius "puzzle" is discussed.
△ Less
Submitted 7 November, 2017; v1 submitted 13 July, 2017;
originally announced July 2017.
-
On drift fields in CMOS Monolithic Active Pixel Sensors with point-like collection diodes
Authors:
M. Deveaux,
J. Baudot,
A. Dorokhov,
D. Doering,
J. Heymes,
M. Kachel,
M. Koziel,
B. Linnik,
C. Müntz,
J. Stroth
Abstract:
- Paper withdrawn by the author - CMOS Monolithic Active Pixel Sensors for charged particle tracking are considered as technology for numerous experiments in heavy ion and particle physics. To match the requirements for those applications in terms of tolerance to non-ionizing radiation, it is being tried to deplete the sensitive volume of the, traditionally non-depleted, silicon sensors.
We stud…
▽ More
- Paper withdrawn by the author - CMOS Monolithic Active Pixel Sensors for charged particle tracking are considered as technology for numerous experiments in heavy ion and particle physics. To match the requirements for those applications in terms of tolerance to non-ionizing radiation, it is being tried to deplete the sensitive volume of the, traditionally non-depleted, silicon sensors.
We study the feasibility of this approach for the common case that the collection diodes of the pixel are small as compared to the pixel pitch. An analytic equation predicting the thickness of the depletion depth and the capacity of this point-like junction is introduced. We find that the predictions of this equations differs qualitatively from the usual results for flat PN junctions and that $dC/dU$-measurements are not suited to measure the depletion depth of diodes with point-like geometry. The predictions of the equation is compared with measurements on the depletion depth of CMOS sensors, which were carried out with a novel measurement protocol. It is found that the equation and the measurement results match with each other. By comparing our findings with TCAD simulations, we find that precise simulation models matches the empirical findings while simplified models overestimate the depletion depth dramatically. A potential explanation for this finding is introduced and the consequences for the design of CMOS sensors are discussed.
△ Less
Submitted 29 October, 2016; v1 submitted 26 July, 2016;
originally announced July 2016.
-
Optimisation of CMOS pixel sensors for high performance vertexing and tracking
Authors:
Jerome Baudot,
Auguste Besson,
Gilles Claus,
Wojciech Dulinski,
Andrei Dorokhov,
Mathieu Goffe,
Christine Hu-Guo,
Levente Molnar,
Xitzel Sanchez-Castro,
Serhyi Senyukov,
Marc Winter
Abstract:
CMOS Pixel Sensors tend to become relevant for a growing spectrum of charged particle detection instruments. This comes mainly from their high granularity and low material budget. However, several potential applications require a higher read-out speed and radiation tolerance than those achieved with available devices based on a 0.35 micrometers feature size technology. This paper shows preliminary…
▽ More
CMOS Pixel Sensors tend to become relevant for a growing spectrum of charged particle detection instruments. This comes mainly from their high granularity and low material budget. However, several potential applications require a higher read-out speed and radiation tolerance than those achieved with available devices based on a 0.35 micrometers feature size technology. This paper shows preliminary test results of new prototype sensors manufactured in a 0.18 micrometers process based on a high resistivity epitaxial layer of sizeable thickness. Grounded on these observed performances, we discuss a development strategy over the coming years to reach a full scale sensor matching the specifications of the upgraded version of the Inner Tracking System (ITS) of the ALICE experiment at CERN, for which a sensitive area of up to about 10 square meters may be equipped with pixel sensors.
△ Less
Submitted 3 May, 2013; v1 submitted 2 May, 2013;
originally announced May 2013.
-
Charged particle detection performances of CMOS pixel sensors produced in a 0.18 um process with a high resistivity epitaxial layer
Authors:
Serhiy Senyukov,
Jerome Baudot,
Auguste Besson,
Gilles Claus,
Loic Cousin,
Andrei Dorokhov,
Wojciech Dulinski,
Mathieu Goffe,
Christine Hu-Guo,
Marc Winter
Abstract:
The apparatus of the ALICE experiment at CERN will be upgraded in 2017/18 during the second long shutdown of the LHC (LS2). A major motivation for this upgrade is to extend the physics reach for charmed and beauty particles down to low transverse momenta. This requires a substantial improvement of the spatial resolution and the data rate capability of the ALICE Inner Tracking System (ITS). To achi…
▽ More
The apparatus of the ALICE experiment at CERN will be upgraded in 2017/18 during the second long shutdown of the LHC (LS2). A major motivation for this upgrade is to extend the physics reach for charmed and beauty particles down to low transverse momenta. This requires a substantial improvement of the spatial resolution and the data rate capability of the ALICE Inner Tracking System (ITS). To achieve this goal, the new ITS will be equipped with 50 um thin CMOS Pixel Sensors (CPS) covering either the 3 innermost layers or all the 7 layers of the detector. The CPS being developed for the ITS upgrade at IPHC (Strasbourg) is derived from the MIMOSA 28 sensor realised for the STAR-PXL at RHIC in a 0.35 um CMOS process. In order to satisfy the ITS upgrade requirements in terms of readout speed and radiation tolerance, a CMOS process with a reduced feature size and a high resistivity epitaxial layer should be exploited. In this respect, the charged particle detection performance and radiation hardness of the TowerJazz 0.18 um CMOS process were studied with the help of the first prototype chip MIMOSA 32. The beam tests performed with negative pions of 120 GeV/c at the CERN-SPS allowed to measure a signal-to-noise ratio (SNR) for the non-irradiated chip in the range between 22 and 32 depending on the pixel design. The chip irradiated with the combined dose of 1 MRad and 10^13 n_eq/cm^2 was observed to yield a SNR ranging between 11 and 23 for coolant temperatures varying from 15 C to 30 C. These SNR values were measured to result in particle detection efficiencies above 99.5% and 98% before and after irradiation respectively. These satisfactory results allow to validate the TowerJazz 0.18 um CMOS process for the ALICE ITS upgrade.
△ Less
Submitted 7 March, 2013; v1 submitted 3 January, 2013;
originally announced January 2013.
-
Development of CMOS Pixel Sensors fully adapted to the ILD Vertex Detector Requirements
Authors:
Marc Winter,
Jerome Baudot,
Auguste Besson,
Gilles Claus,
Andrei Dorokhov,
Mathieu Goffe,
Christine Hu-Guo,
Frederic Morel,
Isabelle Valin,
Georgios Voutsinas,
Liang Zhang
Abstract:
CMOS Pixel Sensors are making steady progress towards the specifications of the ILD vertex detector. Recent developments are summarised, which show that these devices are close to comply with all major requirements, in particular the read-out speed needed to cope with the beam related background. This achievement is grounded on the double- sided ladder concept, which allows combining signals gener…
▽ More
CMOS Pixel Sensors are making steady progress towards the specifications of the ILD vertex detector. Recent developments are summarised, which show that these devices are close to comply with all major requirements, in particular the read-out speed needed to cope with the beam related background. This achievement is grounded on the double- sided ladder concept, which allows combining signals generated by a single particle in two different sensors, one devoted to spatial resolution and the other to time stamp, both assembled on the same mechanical support. The status of the development is overviewed as well as the plans to finalise it using an advanced CMOS process.
△ Less
Submitted 16 March, 2012;
originally announced March 2012.
-
M.i.p. detection performances of a 100 us read-out CMOS pixel sensor with digitised outputs
Authors:
Marc Winter,
Jerome Baudot,
Auguste Besson,
Claude Colledani,
Yavuz Degerli,
Rita De Masi,
Andrei Dorokhov,
Guy Doziere,
Wojciech Dulinski,
Marie Gelin,
Fabrice Guilloux,
Abdelkader Himmi,
Christine Hu-Guo,
Frederic Morel,
Fabienne Orsini,
Isabelle Valin,
Georgios Voutsinas
Abstract:
Swift, high resolution CMOS pixel sensors are being developed for the ILC vertex detector, aiming to allow approaching the interaction point very closely. A major issue is the time resolution of the sensors needed to deal with the high occupancy generated by the beam related background. A 128x576 pixel sensor providing digitised outputs at a read-out time of 92.5 us, was fabricated in 2008 withi…
▽ More
Swift, high resolution CMOS pixel sensors are being developed for the ILC vertex detector, aiming to allow approaching the interaction point very closely. A major issue is the time resolution of the sensors needed to deal with the high occupancy generated by the beam related background. A 128x576 pixel sensor providing digitised outputs at a read-out time of 92.5 us, was fabricated in 2008 within the EU project EUDET, and tested with charged particles at the CERN-SPS. Its prominent performances in terms of noise, detection efficiency versus fake hit rate, spatial resolution and radiation tolerance are overviewed. They validate the sensor architecture.
△ Less
Submitted 16 February, 2009;
originally announced February 2009.
-
Design and performance of the silicon sensors for the CMS barrel pixel detector
Authors:
Y. Allkofer,
C. Amsler,
D. Bortoletto,
V. Chiochia,
L. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
C. Hoermann,
R. Horisberger,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. A. Sanders,
S. Son,
M. Swartz,
T. Speer
Abstract:
The CMS experiment at the LHC includes a hybrid silicon pixel detector for the reconstruction of charged tracks and of the interaction vertices. The barrel region consists of n-in-n sensors with 100X150 um^2 cell size processed on diffusion oxygenated float zone silicon. A biasing grid is implemented and pixel isolation is achieved with the moderated p-spray technique. An extensive test program…
▽ More
The CMS experiment at the LHC includes a hybrid silicon pixel detector for the reconstruction of charged tracks and of the interaction vertices. The barrel region consists of n-in-n sensors with 100X150 um^2 cell size processed on diffusion oxygenated float zone silicon. A biasing grid is implemented and pixel isolation is achieved with the moderated p-spray technique. An extensive test program was carried out on the H2 beam line of the CERN SPS. In this paper we describe the sensor layout, the beam test setup and the results obtained with both irradiated and non-irradiated prototype devices. Measurements of charge collection, hit detection efficiency, Lorentz angle and spatial resolution are presented.
△ Less
Submitted 12 February, 2007;
originally announced February 2007.
-
Simulation of Heavily Irradiated Silicon Pixel Detectors
Authors:
M. Swartz,
V. Chiochia,
Y. Allkofer,
C. Amsler,
D. Bortoletto,
L. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
C. Hoermann,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. A. Sanders,
S. Son,
T. Speer
Abstract:
We show that doubly peaked electric fields are necessary to describe grazing-angle charge collection measurements of irradiated silicon pixel sensors. A model of irradiated silicon based upon two defect levels with opposite charge states and the trapping of charge carriers can be tuned to produce a good description of the measured charge collection profiles in the fluence range from 0.5x10^{14}…
▽ More
We show that doubly peaked electric fields are necessary to describe grazing-angle charge collection measurements of irradiated silicon pixel sensors. A model of irradiated silicon based upon two defect levels with opposite charge states and the trapping of charge carriers can be tuned to produce a good description of the measured charge collection profiles in the fluence range from 0.5x10^{14} Neq/cm^2 to 5.9x10^{14} Neq/cm^2. The model correctly predicts the variation in the profiles as the temperature is changed from -10C to -25C. The measured charge collection profiles are inconsistent with the linearly-varying electric fields predicted by the usual description based upon a uniform effective doping density. This observation calls into question the practice of using effective doping densities to characterize irradiated silicon. The model is now being used to calibrate pixel hit reconstruction algorithms for CMS.
△ Less
Submitted 24 May, 2006;
originally announced May 2006.
-
Observation, modeling, and temperature dependence of doubly peaked electric fields in irradiated silicon pixel sensors
Authors:
M. Swartz,
V. Chiochia,
Y. Allkofer,
D. Bortoletto,
L. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
C. Hoermann,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. A. Sanders,
S. Son,
T. Speer
Abstract:
We show that doubly peaked electric fields are necessary to describe grazing-angle charge collection measurements of irradiated silicon pixel sensors. A model of irradiated silicon based upon two defect levels with opposite charge states and the trapping of charge carriers can be tuned to produce a good description of the measured charge collection profiles in the fluence range from 0.5x10^{14}…
▽ More
We show that doubly peaked electric fields are necessary to describe grazing-angle charge collection measurements of irradiated silicon pixel sensors. A model of irradiated silicon based upon two defect levels with opposite charge states and the trapping of charge carriers can be tuned to produce a good description of the measured charge collection profiles in the fluence range from 0.5x10^{14} Neq/cm^2 to 5.9x10^{14} Neq/cm^2. The model correctly predicts the variation in the profiles as the temperature is changed from -10C to -25C. The measured charge collection profiles are inconsistent with the linearly-varying electric fields predicted by the usual description based upon a uniform effective doping density. This observation calls into question the practice of using effective doping densities to characterize irradiated silicon.
△ Less
Submitted 5 January, 2006; v1 submitted 5 October, 2005;
originally announced October 2005.
-
A double junction model of irradiated silicon pixel sensors for LHC
Authors:
V. Chiochia,
M. Swartz,
Y. Allkofer,
D. Bortoletto,
L. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
C. Hoermann,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. A. Sanders,
S. Son,
M. Swartz,
T. Speer
Abstract:
In this paper we discuss the measurement of charge collection in irradiated silicon pixel sensors and the comparison with a detailed simulation. The simulation implements a model of radiation damage by including two defect levels with opposite charge states and trapping of charge carriers. The modeling proves that a doubly peaked electric field generated by the two defect levels is necessary to…
▽ More
In this paper we discuss the measurement of charge collection in irradiated silicon pixel sensors and the comparison with a detailed simulation. The simulation implements a model of radiation damage by including two defect levels with opposite charge states and trapping of charge carriers. The modeling proves that a doubly peaked electric field generated by the two defect levels is necessary to describe the data and excludes a description based on acceptor defects uniformly distributed across the sensor bulk. In addition, the dependence of trap concentrations upon fluence is established by comparing the measured and simulated profiles at several fluences and bias voltages.
△ Less
Submitted 30 June, 2005;
originally announced June 2005.
-
Extraction of electric field in heavily irradiated silicon pixel sensors
Authors:
A. Dorokhov,
Y. Allkofer,
C. Amsler,
D. Bortoletto,
V. Chiochia,
L. Cremaldi,
S. Cucciarelli,
C. Hoermann,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. Sanders,
S. Son,
T. Speer,
M. Swartz
Abstract:
A new method for the extraction of the electric field in the bulk of heavily irradiated silicon pixel sensors is presented. It is based on the measurement of the Lorentz deflection and mobility of electrons as a function of depth. The measurements were made at the CERN H2 beam line, with the beam at a shallow angle with respect to the pixel sensor surface. The extracted electric field is used to…
▽ More
A new method for the extraction of the electric field in the bulk of heavily irradiated silicon pixel sensors is presented. It is based on the measurement of the Lorentz deflection and mobility of electrons as a function of depth. The measurements were made at the CERN H2 beam line, with the beam at a shallow angle with respect to the pixel sensor surface. The extracted electric field is used to simulate the charge collection and the Lorentz deflection in the pixel sensor. The simulated charge collection and the Lorentz deflection is in good agreement with the measurements both for non-irradiated and irradiated up to 1E15 neq/cm2 sensors.
△ Less
Submitted 25 June, 2005; v1 submitted 6 December, 2004;
originally announced December 2004.
-
Fluence Dependence of Charge Collection of irradiated Pixel Sensors
Authors:
T. Rohe,
D. Bortoletto,
V. Chiochia,
L. M. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
C. Hoermann,
D. Kim,
M. Konecki,
D. Kotlinski,
K. Prokofiev,
C. Regenfus,
D. A. Sanders,
S. Son,
T. Speer,
M. Swartz
Abstract:
The barrel region of the CMS pixel detector will be equipped with ``n-in-n'' type silicon sensors. They are processed on DOFZ material, use the moderated p-spray technique and feature a bias grid. The latter leads to a small fraction of the pixel area to be less sensitive to particles. In order to quantify this inefficiency prototype pixel sensors irradiated to particle fluences between…
▽ More
The barrel region of the CMS pixel detector will be equipped with ``n-in-n'' type silicon sensors. They are processed on DOFZ material, use the moderated p-spray technique and feature a bias grid. The latter leads to a small fraction of the pixel area to be less sensitive to particles. In order to quantify this inefficiency prototype pixel sensors irradiated to particle fluences between $4.7\times 10^{13}$ and $2.6\times 10^{15} \Neq$ have been bump bonded to un-irradiated readout chips and tested using high energy pions at the H2 beam line of the CERN SPS. The readout chip allows a non zero suppressed analogue readout and is therefore well suited to measure the charge collection properties of the sensors.
In this paper we discuss the fluence dependence of the collected signal and the particle detection efficiency. Further the position dependence of the efficiency is investigated.
△ Less
Submitted 4 January, 2005; v1 submitted 23 November, 2004;
originally announced November 2004.
-
Simulation of Heavily Irradiated Silicon Pixel Sensors and Comparison with Test Beam Measurements
Authors:
Vincenzo Chiochia,
Morris Swartz,
Daniela Bortoletto,
Lucien Cremaldi,
Susanna Cucciarelli,
Andrei Dorokhov,
Christoph Hoermann,
Dongwook Kim,
Marcin Konecki,
Danek Kotlinski,
Kirill Prokofiev,
Christian Regenfus,
Tilman Rohe,
David A. Sanders,
Seunghee Son,
Thomas Speer
Abstract:
Charge collection measurements performed on heavily irradiated p-spray DOFZ pixel sensors with a grazing angle hadron beam provide a sensitive determination of the electric field within the detectors. The data are compared with a complete charge transport simulation of the sensor which includes signal trapping and charge induction effects. A linearly varying electric field based upon the standar…
▽ More
Charge collection measurements performed on heavily irradiated p-spray DOFZ pixel sensors with a grazing angle hadron beam provide a sensitive determination of the electric field within the detectors. The data are compared with a complete charge transport simulation of the sensor which includes signal trapping and charge induction effects. A linearly varying electric field based upon the standard picture of a constant type-inverted effective doping density is inconsistent with the data. A two-trap double junction model implemented in the ISE TCAD software can be tuned to produce a doubly-peaked electric field which describes the data reasonably well. The modeled field differs somewhat from previous determinations based upon the transient current technique. The model can also account for the level of charge trapping observed in the data.
△ Less
Submitted 4 May, 2005; v1 submitted 16 November, 2004;
originally announced November 2004.
-
Type inversion in irradiated silicon: a half truth
Authors:
M. Swartz,
D. Bortoletto,
V. Chiochia,
L. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
M. Konecki,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. A. Sanders,
S. Son,
T. Speer
Abstract:
Charge collection measurements performed on heavily irradiated p-spray dofz pixel sensors with a grazing angle hadron beam provide a sensitive determination of the electric field within the detectors. The data are compared with a complete charge transport simulation of the sensor which includes signal trapping and charge induction effects. A linearly varying electric field based upon the standar…
▽ More
Charge collection measurements performed on heavily irradiated p-spray dofz pixel sensors with a grazing angle hadron beam provide a sensitive determination of the electric field within the detectors. The data are compared with a complete charge transport simulation of the sensor which includes signal trapping and charge induction effects. A linearly varying electric field based upon the standard picture of a constant type-inverted effective doping density is inconsistent with the data. A two-trap double junction model implemented in ISE TCAD software can be tuned to produce a doubly-peaked electric field which describes the data reasonably well at two different fluences. The modeled field differs somewhat from previous determinations based upon the transient current technique. The model can also account for the level of signal trapping observed in the data.
△ Less
Submitted 13 September, 2004; v1 submitted 9 September, 2004;
originally announced September 2004.
-
Position Dependence of Charge Collection in Prototype Sensors for the CMS Pixel Detector
Authors:
T. Rohe,
D. Bortoletto,
V. Chiochia,
L. M. Cremaldi,
S. Cucciarelli,
A. Dorokhov,
M. Konecki,
K. Prokofiev,
C. Regenfus,
D. A. Sanders,
S. Son,
T. Speer,
M. Swartz
Abstract:
This paper reports on the sensor R&D activity for the CMS pixel detector. Devices featuring several design and technology options have been irradiated up to a proton fluencec of 1E15 n_eq/cm**2 at the CERN PS. Afterward they were bump bonded to unirradiated readout chips and tested using high energy pions in the H2 beam line of the CERN SPS. The readout chip allows a non zero suppressed full ana…
▽ More
This paper reports on the sensor R&D activity for the CMS pixel detector. Devices featuring several design and technology options have been irradiated up to a proton fluencec of 1E15 n_eq/cm**2 at the CERN PS. Afterward they were bump bonded to unirradiated readout chips and tested using high energy pions in the H2 beam line of the CERN SPS. The readout chip allows a non zero suppressed full analogue readout and therefore a good characterization of the sensors in terms of noise and charge collection properties. The position dependence of signal is presented and the differences between the two sensor options are discussed.
△ Less
Submitted 31 August, 2004; v1 submitted 2 December, 2003;
originally announced December 2003.
-
Tests of silicon sensors for the CMS pixel detector
Authors:
A. Dorokhov,
C. Amsler,
D. Bortoletto,
V. Chiochia,
L. Cremaldi,
S. Cucciarelli,
M. Konecki,
K. Prokofiev,
C. Regenfus,
T. Rohe,
D. Sanders,
S. Son,
T. Speer,
M. Swartz
Abstract:
The tracking system of the CMS experiment, currently under construction at the Large Hadron Collider (LHC) at CERN (Geneva, Switzerland), will include a silicon pixel detector providing three spacial measurements in its final configuration for tracks produced in high energy pp collisions. In this paper we present the results of test beam measurements performed at CERN on irradiated silicon pixel…
▽ More
The tracking system of the CMS experiment, currently under construction at the Large Hadron Collider (LHC) at CERN (Geneva, Switzerland), will include a silicon pixel detector providing three spacial measurements in its final configuration for tracks produced in high energy pp collisions. In this paper we present the results of test beam measurements performed at CERN on irradiated silicon pixel sensors. Lorentz angle and charge collection efficiency were measured for two sensor designs and at various bias voltages.
△ Less
Submitted 11 November, 2003;
originally announced November 2003.
