-
GPU-based data processing for speeding-up correlation plenoptic imaging
Authors:
Francesca Santoro,
Isabella Petrelli,
Gianlorenzo Massaro,
George Filios,
Francesco V. Pepe,
Leonardo Amoruso,
Maria Ieronimaki,
Samuel Burri,
Edoardo Charbon,
Paul Mos,
Arin Ulku,
Michael Wayne,
Cristoforo Abbattista,
Claudio Bruschini,
Milena D'Angelo
Abstract:
Correlation Plenoptic Imaging (CPI) is a novel technological imaging modality enabling to overcome drawbacks of standard plenoptic devices, while preserving their advantages. However, a major challenge in view of real-time application of CPI is related with the relevant amount of required frames and the consequent computational-intensive processing algorithm. In this work, we describe the design a…
▽ More
Correlation Plenoptic Imaging (CPI) is a novel technological imaging modality enabling to overcome drawbacks of standard plenoptic devices, while preserving their advantages. However, a major challenge in view of real-time application of CPI is related with the relevant amount of required frames and the consequent computational-intensive processing algorithm. In this work, we describe the design and implementation of an optimized processing algorithm that is portable to an efficient computational environment and exploits the highly parallel algorithm offered by GPUs. Improvements by a factor ranging from 20x, for correlation measurement, to 500x, for refocusing, are demonstrated. Exploration of the relation between the improvement in performance achieved and actual GPU capabilities, also indicates the feasibility of near-real time processing capability, opening up to the potential use of CPI for practical real-time application.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
Inter-pixel cross-talk as background to two-photon interference effects in SPAD arrays
Authors:
Sergei Kulkov,
Tereza Potuckova,
Ermanno Bernasconi,
Claudio Bruschini,
Tommaso Milanese,
Edoardo Charbon,
Mst Shamim Ara Shawkat,
Andrei Nomerotski,
Peter Svihra
Abstract:
Cross-talk is a well-known feature of single-photon avalanche detectors. It is especially important to account for this effect in applications involving coincidences of two or more photons registered by the sensor since in this case the cross-talk may mimic the useful signal. In this work, we characterize the cross-talk of the LinoSPAD2 detector, as well as perform joint measurements of the cross-…
▽ More
Cross-talk is a well-known feature of single-photon avalanche detectors. It is especially important to account for this effect in applications involving coincidences of two or more photons registered by the sensor since in this case the cross-talk may mimic the useful signal. In this work, we characterize the cross-talk of the LinoSPAD2 detector, as well as perform joint measurements of the cross-talk and Hanbury Brown - Twiss two-photon interference, comparing and cross-calibrating both effects. With a median dark count rate of 125 cps/pixel, we report the average cross-talk probability of $0.22~\%$ for the nearest neighbor and also observe a long-range cross-talk of the order $2 \cdot 10^{-5}~\%$ for channels separated by up to 20 pixels.
△ Less
Submitted 30 June, 2024; v1 submitted 21 June, 2024;
originally announced June 2024.
-
Multifrequency-resolved Hanbury Brown-Twiss Effect
Authors:
Joseph Ferrantini,
Jesse Crawford,
Sergei Kulkov,
Jakub Jirsa,
Aaron Mueninghoff,
Lucas Lawrence,
Stephen Vintskevich,
Tommaso Milanese,
Samuel Burri,
Ermanno Bernasconi,
Claudio Bruschini,
Michal Marcisovsky,
Peter Svihra,
Andrei Nomerotski,
Paul Stankus,
Edoardo Charbon,
Raphael A. Abrahao
Abstract:
The Hanbury Brown-Twiss (HBT) effect holds a pivotal place in intensity interferometry and gave a seminal contribution to the development of quantum optics. To observe such an effect, both good spectral and timing resolutions are necessary. Most often, the HBT effect is observed for a single frequency at a time, due to limitations in dealing with multifrequencies simultaneously, halting and limiti…
▽ More
The Hanbury Brown-Twiss (HBT) effect holds a pivotal place in intensity interferometry and gave a seminal contribution to the development of quantum optics. To observe such an effect, both good spectral and timing resolutions are necessary. Most often, the HBT effect is observed for a single frequency at a time, due to limitations in dealing with multifrequencies simultaneously, halting and limiting some applications. Here, we report a fast and data-driven spectrometer built with a one-dimensional array of single-photon-sensitive avalanche diodes. We report observing the HBT effect for multifrequencies at the same time. Specifically, we observed the HBT for up to 5 lines of the Ne spectrum, but this can be improved even further. Our work represents a major step to make spectral binning and multifrequencies HBT more widely available. The technology we present can benefit both classical and quantum applications.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
A 1.8-um pitch, 47-ps jitter SPAD Array in 130nm SiGe BiCMOS Process
Authors:
Feng Liu,
Edoardo Charbon
Abstract:
We introduce the world's first SPAD family design in 130 nm SiGe BiCMOS process. At 1.8um, we achieved the smallest pitch on record thanks to guard-ring sharing techniques, while keeping a relatively high fill factor of 24.2%. 4x4 SPAD arrays with two parallel selective readout circuits were designed to explore crosstalk and scalability. The SPAD family has a minimum breakdown voltage of 11 V, a m…
▽ More
We introduce the world's first SPAD family design in 130 nm SiGe BiCMOS process. At 1.8um, we achieved the smallest pitch on record thanks to guard-ring sharing techniques, while keeping a relatively high fill factor of 24.2%. 4x4 SPAD arrays with two parallel selective readout circuits were designed to explore crosstalk and scalability. The SPAD family has a minimum breakdown voltage of 11 V, a maximum PDP of 40.6% and a typical timing jitter of 47 ps FWHM. The development of silicon SPADs in SiGe process paves the way to Ge-on-Si SPADs for SWIR applications, and to cryogenic optical interfaces for quantum applications.
△ Less
Submitted 19 June, 2024;
originally announced June 2024.
-
Beneath the Surface: Revealing Deep-Tissue Blood Flow in Human Subjects with Massively Parallelized Diffuse Correlation Spectroscopy
Authors:
Lucas Kreiss,
Melissa Wu,
Michael Wayne,
Shiqi Xu,
Paul McKee,
Derrick Dwamena,
Kanghyun Kim,
Kyung Chul Lee,
Wenhui Liu,
Aarin Ulku,
Mark Harfouche,
Xi Yang,
Clare Cook,
Amey Chaware,
Seung Ah Lee,
Erin Buckley,
Claudio Bruschini,
Edoardo Charbon,
Scott Huettel,
Roarke Horstmeyer
Abstract:
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) a…
▽ More
Diffuse Correlation Spectroscopy (DCS) allows the label-free investigation of microvascular dynamics deep within living tissue. However, common implementations of DCS are currently limited to measurement depths of $\sim 1-1.5cm$, which can limit the accuracy of cerebral hemodynamics measurement. Here we present massively parallelized DCS (pDCS) using novel single photon avalanche detector (SPAD) arrays with up to 500x500 individual channels. The new SPAD array technology can boost the signal-to-noise ratio by a factor of up to 500 compared to single-pixel DCS, or by more than 15-fold compared to the most recent state-of-the-art pDCS demonstrations. Our results demonstrate the first in vivo use of this massively parallelized DCS system to measure cerebral blood flow changes at $\sim 2cm$ depth in human adults. We compared different modes of operation and applied a dual detection strategy, where a secondary SPAD array is used to simultaneously assess the superficial blood flow as a built-in reference measurement. While the blood flow in the superficial scalp tissue showed no significant change during cognitive activation, the deep pDCS measurement showed a statistically significant increase in the derived blood flow index of 8-12% when compared to the control rest state.
△ Less
Submitted 25 June, 2024; v1 submitted 6 March, 2024;
originally announced March 2024.
-
Time-resolved laser speckle contrast imaging (TR-LSCI) of cerebral blood flow
Authors:
Faraneh Fathi,
Siavash Mazdeyasna,
Dara Singh,
Chong Huang,
Mehrana Mohtasebi,
Xuhui Liu,
Samaneh Rabienia Haratbar,
Mingjun Zhao,
Li Chen,
Arin Can Ulku,
Paul Mos,
Claudio Bruschini,
Edoardo Charbon,
Lei Chen,
Guoqiang Yu
Abstract:
To address many of the deficiencies in optical neuroimaging technologies such as poor spatial resolution, time-consuming reconstruction, low penetration depth, and contact-based measurement, a novel, noncontact, time-resolved laser speckle contrast imaging (TR-LSCI) technique has been developed for continuous, fast, and high-resolution 2D mapping of cerebral blood flow (CBF) at different depths of…
▽ More
To address many of the deficiencies in optical neuroimaging technologies such as poor spatial resolution, time-consuming reconstruction, low penetration depth, and contact-based measurement, a novel, noncontact, time-resolved laser speckle contrast imaging (TR-LSCI) technique has been developed for continuous, fast, and high-resolution 2D mapping of cerebral blood flow (CBF) at different depths of the head. TR-LSCI illuminates the head with picosecond-pulsed, coherent, widefield near-infrared light and synchronizes a newly developed, high-resolution, gated single-photon avalanche diode camera (SwissSPAD2) to capture CBF maps at different depths. By selectively collecting diffuse photons with longer pathlengths through the head, TR-LSCI reduces partial volume artifacts from the overlying tissues, thus improving the accuracy of CBF measurement in the deep brain. CBF map reconstruction was dramatically expedited by incorporating highly parallelized computation. The performance of TR-LSCI was evaluated using head-simulating phantoms with known properties and in-vivo rodents with varied hemodynamic challenges to the brain. Results from these pilot studies demonstrated that TR-LSCI enabled mapping CBF variations at different depths with a sampling rate of up to 1 Hz and spatial resolutions ranging from tens of micrometers on the head surface to 1-2 millimeters in the deep brain. With additional improvements and validation in larger populations against established methods, we anticipate offering a noncontact, fast, high-resolution, portable, and affordable brain imager for fundamental neuroscience research in animals and for translational studies in humans.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Demonstration of particle tracking with scintillating fibres read out by a SPAD array sensor and application as a neutrino active target
Authors:
Matthew Franks,
Till Dieminger,
Kodai Kaneyasu,
Davide Sgalaberna,
Claudio Bruschini,
Edoardo Charbon,
Umut Kose,
Botao Li,
Paul Mos,
Michael Wayne,
Tim Weber,
Jialin Wu
Abstract:
Scintillating fibre detectors combine sub-mm resolution particle tracking, precise measurements of the particle stopping power and sub-ns time resolution. Typically, fibres are read out with silicon photomultipliers (SiPM). Hence, if fibres with a few hundred $μ$m diameter are used, either they are grouped together and coupled with a single SiPM, losing spatial resolution, or a very large number o…
▽ More
Scintillating fibre detectors combine sub-mm resolution particle tracking, precise measurements of the particle stopping power and sub-ns time resolution. Typically, fibres are read out with silicon photomultipliers (SiPM). Hence, if fibres with a few hundred $μ$m diameter are used, either they are grouped together and coupled with a single SiPM, losing spatial resolution, or a very large number of electronic channels is required. In this article we propose and provide a first demonstration of a novel configuration which allows each individual scintillating fibre to be read out regardless of the size of its diameter, by imaging them with Single-Photon Avalanche Diode (SPAD) array sensors. Differently from SiPMs, SPAD array sensors provide single-photon detection with single-pixel spatial resolution. In addition, O(us) or faster coincidence of detected photons allows to obtain noise-free images. Such a concept can be particularly advantageous if adopted as a neutrino active target, where scintillating fibres alternated along orthogonal directions can provide isotropic, high-resolution tracking in a dense material and reconstruct the kinematics of low-momentum protons (down to 150 MeV/c), crucial for an accurate characterisation of the neutrino nucleus cross section. In this work the tracking capabilities of a bundle of scintillating fibres coupled to SwissSPAD2 is demonstrated. The impact of such detector configuration in GeV-neutrino experiments is studied with simulations and reported. Finally, future plans, including the development of a new SPAD array sensor optimised for neutrino detection, are discussed.
△ Less
Submitted 13 November, 2023; v1 submitted 6 September, 2023;
originally announced September 2023.
-
Highly sensitive single-molecule detection in slow protein ion beams
Authors:
M. Strauß,
A. Shayeghi,
M. F. X. Mauser,
P. Geyer,
T. Kostersitz,
J. Salapa,
O. Dobrovolskiy,
S. Daly,
J. Commandeur,
Y. Hua,
V. Köhler,
M. Mayor,
J. Benserhir,
C. Bruschini,
E. Charbon,
M. Castaneda,
M. Gevers,
R. Gourgues,
N. Kalhor,
A. Fognini,
M. Arndt
Abstract:
The analysis of proteins in the gas phase benefits from detectors that exhibit high efficiency and precise spatial resolution. Although modern secondary electron multipliers already address numerous analytical requirements, new methods are desired for macromolecules at low energy. Previous studies have proven the sensitivity of superconducting detectors to high-energy particles in time-of-flight m…
▽ More
The analysis of proteins in the gas phase benefits from detectors that exhibit high efficiency and precise spatial resolution. Although modern secondary electron multipliers already address numerous analytical requirements, new methods are desired for macromolecules at low energy. Previous studies have proven the sensitivity of superconducting detectors to high-energy particles in time-of-flight mass spectrometry. Here we explore a new energy regime and demonstrate that superconducting nanowire detectors are exceptionally well suited for quadrupole mass spectrometry. Our detectors exhibit an outstanding quantum yield at remarkably low impact energies. Notably, at low ion energy, their sensitivity surpasses conventional ion detectors by three orders of magnitude, and they offer the possibility to discriminate molecules by their impact energy and charge. By combining these detectors into arrays, we demonstrate low-energy ion beam profilometry, while our cryogenic electronics pave the way for future developments of highly integrated detectors.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Photonic-electronic integrated circuit-based coherent LiDAR engine
Authors:
Anton Lukashchuk,
Halil Kerim Yildirim,
Andrea Bancora,
Grigory Lihachev,
Yang Liu,
Zheru Qiu,
Xinru Ji,
Andrey Voloshin,
Sunil A. Bhave,
Edoardo Charbon,
Tobias J. Kippenberg
Abstract:
Microelectronic integration is a key enabler for the ubiquitous deployment of devices in large volumes ranging from MEMS and imaging sensors to consumer electronics. Such integration has also been achieved in photonics, where compact optical transceivers for data centers employ co-integrated photonic and electronic components. Chip-scale integration is of particular interest to coherent laser rang…
▽ More
Microelectronic integration is a key enabler for the ubiquitous deployment of devices in large volumes ranging from MEMS and imaging sensors to consumer electronics. Such integration has also been achieved in photonics, where compact optical transceivers for data centers employ co-integrated photonic and electronic components. Chip-scale integration is of particular interest to coherent laser ranging i.e. frequency modulated continuous wave (FMCW LiDAR), a perception technology that benefits from instantaneous velocity and distance detection, eye-safe operation, long-range and immunity to interference. Full wafer-scale integration of this technology has been compounded by the stringent requirements on the lasers, requiring high optical coherence, low chirp nonlinearity and requiring optical amplifiers. Here, we overcome this challenge and demonstrate a photonic-electronic integrated circuit-based coherent LiDAR engine, that combined all functionalities using fully foundry-compatible wafer scale manufacturing. It is comprised of a micro-electronic based high voltage arbitrary waveform generator, a hybrid photonic circuit based tunable Vernier laser with piezoelectric actuators, and an erbium-doped waveguide optical amplifier - all realized in a wafer scale manufacturing compatible process that comprises III-V semiconductors, SiN silicon nitride photonic integrated circuits as well as 130nm SiGe BiCMOS technology. The source is a turnkey, linearization-free, and can serve as a 'drop-in' solution in any FMCW LiDAR, that can be seamlessly integrated with an existing focal plane and optical phased array LiDAR approaches, constituting a missing step towards a fully chip-scale integrated LiDAR system.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
Large Reconfigurable Quantum Circuits with SPAD Arrays and Multimode Fibers
Authors:
Adrian Makowski,
Michał Dąbrowski,
Ivan Michel Antolovic,
Claudio Bruschini,
Hugo Defienne,
Edoardo Charbon,
Radek Lapkiewicz,
Sylvain Gigan
Abstract:
Reprogrammable linear optical circuits are essential elements of photonic quantum technology implementations. Integrated optics provides a natural platform for tunable photonic circuits, but faces challenges when high dimensions and high connectivity are involved. Here, we implement high-dimensional linear transformations on spatial modes of photons using wavefront shaping together with mode mixin…
▽ More
Reprogrammable linear optical circuits are essential elements of photonic quantum technology implementations. Integrated optics provides a natural platform for tunable photonic circuits, but faces challenges when high dimensions and high connectivity are involved. Here, we implement high-dimensional linear transformations on spatial modes of photons using wavefront shaping together with mode mixing in a multimode fiber, and measure photon correlations using a time-tagging single-photon avalanche diode (SPAD) array. In order to prove the suitability of our approach for quantum technologies we demonstrate two-photon interferences in a tunable complex linear network -- a generalization of a Hong-Ou-Mandel interference to 22 output ports. We study the scalability of our approach by quantifying the similarity between the ideal photon correlations and the correlations obtained experimentally for various linear transformations. Our results demonstrate the potential of wavefront shaping in complex media in conjunction with SPAD arrays for implementing high-dimensional reconfigurable quantum circuits. Specifically, we achieved $(80.5 \pm 6.8)\%$ similarity for indistinguishable photon pairs and $(84.9 \pm 7.0)\%$ similarity for distinguishable photon pairs using 22 detectors and random circuits. These results emphasize the scalability and reprogrammable nature of our approach.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Fast data-driven spectrometer with direct measurement of time and frequency for multiple single photons
Authors:
Jakub Jirsa,
Sergei Kulkov,
Raphael A. Abrahao,
Jesse Crawford,
Aaron Mueninghoff,
Ermanno Bernasconi,
Claudio Bruschini,
Samuel Burri,
Stephen Vintskevich,
Michal Marcisovsky,
Edoardo Charbon,
Andrei Nomerotski
Abstract:
We present a single-photon-sensitive spectrometer, based on a linear array of 512 single-photon avalanche diode detectors, with 0.04 nm spectral and 40 ps temporal resolutions. We employ a fast data-driven operation that allows direct measurement of time and frequency for simultaneous single photons, time- and frequency-stamping each single-photon detection. Our results combine excellent temporal…
▽ More
We present a single-photon-sensitive spectrometer, based on a linear array of 512 single-photon avalanche diode detectors, with 0.04 nm spectral and 40 ps temporal resolutions. We employ a fast data-driven operation that allows direct measurement of time and frequency for simultaneous single photons, time- and frequency-stamping each single-photon detection. Our results combine excellent temporal and spectral resolution. We benchmark our result against the Heisenberg Uncertainty Principle limit of hbar/2 for time and energy, and we are only a factor of 10 above it, despite the simplicity of our experimental setup, including room temperature operation. This work opens numerous applications in both classical and quantum photonics, especially when both spectral and temporal properties of single photons are exploited.
△ Less
Submitted 15 March, 2024; v1 submitted 24 April, 2023;
originally announced April 2023.
-
High-kinetic inductance NbN films for high-quality compact superconducting resonators
Authors:
Simone Frasca,
Ivo Nikolaev Arabadzhiev,
Sebastien Yves Bros de Puechredon,
Fabian Oppliger,
Vincent Jouanny,
Roberto Musio,
Marco Scigliuzzo,
Fabrizio Minganti,
Pasquale Scarlino,
Edoardo Charbon
Abstract:
Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as entails the degree of reproducibility necessary for large-scale of superconducting circuits. We demonstrate that resonators based on NbN thin films present a one-photon internal quality factor above 10$^5$ maintaining a high impedance (larger than 2k$Ω$), with a footprint of approximately 50x100 $μ$m…
▽ More
Niobium nitride (NbN) is a particularly promising material for quantum technology applications, as entails the degree of reproducibility necessary for large-scale of superconducting circuits. We demonstrate that resonators based on NbN thin films present a one-photon internal quality factor above 10$^5$ maintaining a high impedance (larger than 2k$Ω$), with a footprint of approximately 50x100 $μ$m$^2$ and a self-Kerr nonlinearity of few tenths of Hz. These quality factors, mostly limited by losses induced by the coupling to two-level systems, have been maintained for kinetic inductances ranging from tenths to hundreds of pH/square. We also demonstrate minimal variations in the performance of the resonators during multiple cooldowns over more than nine months. Our work proves the versatility of niobium nitride high-kinetic inductance resonators, opening perspectives towards the fabrication of compact, high-impedance and high-quality multimode circuits, with sizable interactions.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Compressive Raman microspectroscopy parallelized by single-photon avalanche diode arrays
Authors:
Clémence Gentner,
Samuel Burri,
Edoardo Charbon,
Claudio Bruschini,
Hilton B. de Aguiar
Abstract:
We demonstrate an efficient and scalable compressive Raman parallelization scheme based on single-photon avalanche diode (SPAD) arrays to reach pixel dwell times of 23 $μ$s, representing over 10$\times$ speed-up using the otherwise weak spontaneous Raman effect.
We demonstrate an efficient and scalable compressive Raman parallelization scheme based on single-photon avalanche diode (SPAD) arrays to reach pixel dwell times of 23 $μ$s, representing over 10$\times$ speed-up using the otherwise weak spontaneous Raman effect.
△ Less
Submitted 18 January, 2023;
originally announced January 2023.
-
MALTA-Cz: A radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate
Authors:
H. Pernegger,
P. Allport,
D. V. Berlea,
A. Birman,
D. Bortoletto,
C. Buttar,
E. Charbon,
F. Dachs,
V. Dao,
H. Denizli,
D. Dobrijevic,
M. Dyndal,
A. Fenigstein,
L. Flores Sanz de Acedo,
P. Freeman,
A. Gabrielli,
M. Gazi,
L. Gonella,
V. Gonzalez,
G. Gustavino,
A. Haim,
T. Kugathasan,
M. LeBlanc,
M. Munker,
K. Y. Oyulmaz
, et al. (14 additional authors not shown)
Abstract:
Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granulari…
▽ More
Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granularity, high hit-rate capability, fast response time and superior radiation tolerance. The small pixel size ($36.4\times 36.4$~$μ$m$^2$) provides high spatial resolution. Its asynchronous readout architecture is designed for high hit-rates and fast time response in triggered and trigger-less detector applications. The readout architecture is designed to stream all hit data to the multi-channel output which allows an off-sensor trigger formation and the use of hit-time information for event tagging.
The sensor manufacturing has been optimised through process adaptation and special implant designs to allow the manufacturing of small electrode DMAPS on thick high-resistivity p-type Czochralski substrate. The special processing ensures excellent charge collection and charge particle detection efficiency even after a high level of radiation. Furthermore the special implant design and use of a Czochralski substrate improves the sensor's time resolution. This paper presents a summary of sensor design optimisation through process and implant choices and TCAD simulation to model the signal response. Beam and laboratory test results on unirradiated and irradiated sensors have shown excellent detection efficiency after a dose of $2\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. The time resolution of the sensor is measured to be $σ=2$~ns.
△ Less
Submitted 13 September, 2023; v1 submitted 10 January, 2023;
originally announced January 2023.
-
Digital Pixel Test Structures implemented in a 65 nm CMOS process
Authors:
Gianluca Aglieri Rinella,
Anton Andronic,
Matias Antonelli,
Mauro Aresti,
Roberto Baccomi,
Pascal Becht,
Stefania Beole,
Justus Braach,
Matthew Daniel Buckland,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Leonardo Cecconi,
Edoardo Charbon,
Giacomo Contin,
Dominik Dannheim,
Joao de Melo,
Wenjing Deng,
Antonello di Mauro,
Jan Hasenbichler,
Hartmut Hillemanns,
Geun Hee Hong,
Artem Isakov,
Antoine Junique,
Alex Kluge
, et al. (27 additional authors not shown)
Abstract:
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the…
▽ More
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the first critical steps towards the realisation of this detector is to validate the sensor technology through extensive characterisation both in the laboratory and with in-beam measurements. The Digital Pixel Test Structure (DPTS) is one of the prototypes produced in the first sensor submission in this technology and has undergone a systematic measurement campaign whose details are presented in this article.
The results confirm the goals of detection efficiency and non-ionising and ionising radiation hardness up to the expected levels for ALICE ITS3 and also demonstrate operation at +20 C and a detection efficiency of 99% for a DPTS irradiated with a dose of $10^{15}$ 1 MeV n$_{\mathrm{eq}}/$cm$^2$. Furthermore, spatial, timing and energy resolutions were measured at various settings and irradiation levels.
△ Less
Submitted 10 July, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
Correlated-photon imaging at 10 volumetric images per second
Authors:
Gianlorenzo Massaro,
Paul Mos,
Sergii Vasiukov,
Francesco Di Lena,
Francesco Scattarella,
Francesco V. Pepe,
Arin Ulku,
Davide Giannella,
Edoardo Charbon,
Claudio Bruschini,
Milena D'Angelo
Abstract:
The correlation properties of light provide an outstanding tool to overcome the limitations of traditional imaging techniques. A relevant case is represented by correlation plenoptic imaging (CPI), a quantum-inspired volumetric imaging protocol employing spatio-temporally correlated photons from either entangled or chaotic sources to address the main limitations of conventional light-field imaging…
▽ More
The correlation properties of light provide an outstanding tool to overcome the limitations of traditional imaging techniques. A relevant case is represented by correlation plenoptic imaging (CPI), a quantum-inspired volumetric imaging protocol employing spatio-temporally correlated photons from either entangled or chaotic sources to address the main limitations of conventional light-field imaging, namely, the poor spatial resolution and the reduced change of perspective for 3D imaging. However, the application potential of high-resolution imaging modalities relying on photon correlations is limited, in practice, by the need to collect a large number of frames. This creates a gap, unacceptable for many relevant tasks, between the time performance of correlated-light imaging and that of traditional imaging methods. In this article, we address this issue by exploiting the photon number correlations intrinsic in chaotic light, combined with a cutting-edge ultrafast sensor made of a large array of single-photon avalanche diodes (SPADs). This combination of source and sensor is embedded within a novel single-lens CPI scheme enabling to acquire 10 volumetric images per second. Our results place correlated-photon imaging at a competitive edge and prove its potential in practical applications.
△ Less
Submitted 7 August, 2023; v1 submitted 5 December, 2022;
originally announced December 2022.
-
On Analog Silicon Photomultipliers in Standard 55-nm BCD Technology for LiDAR Applications
Authors:
Jiuxuan Zhao,
Tommaso Milanese,
Francesco Gramuglia,
Pouyan Keshavarzian,
Shyue Seng Tan,
Michelle Tng,
Louis Lim,
Vinit Dhulla,
Elgin Quek,
Myung-Jae Lee,
Edoardo Charbon
Abstract:
We present an analog silicon photomultiplier (SiPM) based on a standard 55 nm Bipolar-CMOS-DMOS (BCD) technology. The SiPM is composed of 16$\times$16 single-photon avalanche diodes (SPADs) and measures 0.29$\times$0.32 mm$^2$. Each SPAD cell is passively quenched by a monolithically integrated 3.3 V thick oxide transistor. The measured gain is 3.4$\times$ 10$^5$ at 5 V excess bias voltage. The si…
▽ More
We present an analog silicon photomultiplier (SiPM) based on a standard 55 nm Bipolar-CMOS-DMOS (BCD) technology. The SiPM is composed of 16$\times$16 single-photon avalanche diodes (SPADs) and measures 0.29$\times$0.32 mm$^2$. Each SPAD cell is passively quenched by a monolithically integrated 3.3 V thick oxide transistor. The measured gain is 3.4$\times$ 10$^5$ at 5 V excess bias voltage. The single-photon timing resolution (SPTR) is 185 ps and the multiple-photon timing resolution (MPTR) is 120 ps at 3.3 V excess bias voltage. We integrate the SiPM into a co-axial light detection and ranging (LiDAR) system with a time-correlated single-photon counting (TCSPC) module in FPGA. The depth measurement up to 25 m achieves an accuracy of 2 cm and precision of 2 mm under the room ambient light condition. With co-axial scanning, the intensity and depth images of complex scenes with resolutions of 128$\times$256 and 256$\times$512 are demonstrated. The presented SiPM enables the development of cost-effective LiDAR system-on-chip (SoC) in the advanced technology.
△ Less
Submitted 29 December, 2021;
originally announced December 2021.
-
Measurements and analysis of different front-end configurations for monolithic SiGe BiCMOS pixel detectors for HEP applications
Authors:
Fulvio Martinelli,
Chiara Magliocca,
Roberto Cardella,
Edoardo Charbon,
Giuseppe Iacobucci,
Marzio Nessi,
Lorenzo Paolozzi,
Holger Rücker,
Pierpaolo Valerio
Abstract:
This paper presents a small-area monolithic pixel detector ASIC designed in 130 nm SiGe BiCMOS technology for the upgrade of the pre-shower detector of the FASER experiment at CERN. The purpose of this prototype is to study the integration of fast front-end electronics inside the sensitive area of the pixels and to identify the configuration that could satisfy at best the specifications of the exp…
▽ More
This paper presents a small-area monolithic pixel detector ASIC designed in 130 nm SiGe BiCMOS technology for the upgrade of the pre-shower detector of the FASER experiment at CERN. The purpose of this prototype is to study the integration of fast front-end electronics inside the sensitive area of the pixels and to identify the configuration that could satisfy at best the specifications of the experiment. Self-induced noise, instabilities and cross-talk were minimised to cope with the several challenges associated to the integration of pre-amplifiers and discriminators inside the pixels. The methodology used in the characterisation and the design choices will also be described. Two of the variants studied here will be implemented in the pre-production ASIC of the FASER experiment pre-shower for further tests.
△ Less
Submitted 22 November, 2021;
originally announced November 2021.
-
Sub-10 ps Minimum Ionizing Particle Detection with Geiger-Mode APDs
Authors:
Francesco Gramuglia,
Emanuele Ripiccini,
Carlo Alberto Fenoglio,
Ming-Lo Wu,
Lorenzo Paolozzi,
Claudio Bruschini,
Edoardo Charbon
Abstract:
Major advances in silicon pixel detectors, with outstanding timing performance, have recently attracted significant attention in the community. In this work we present and discuss the use of state-of-the-art Geiger-mode APDs, also known as single-photon avalanche diodes (SPADs), for the detection of minimum ionizing particles (MIPs) with best-in-class timing resolution. The SPADs were implemented…
▽ More
Major advances in silicon pixel detectors, with outstanding timing performance, have recently attracted significant attention in the community. In this work we present and discuss the use of state-of-the-art Geiger-mode APDs, also known as single-photon avalanche diodes (SPADs), for the detection of minimum ionizing particles (MIPs) with best-in-class timing resolution. The SPADs were implemented in standard CMOS technology and integrated with on-chip quenching and recharge circuitry. Two devices in coincidence allowed to measure the time-of-flight of 180 GeV/c momentum pions with a coincidence time resolution of 22 ps FWHM (9.5 ps Gaussian sigma). Radiation hardness measurements, also presented here, highlight the suitability of this family of devices for a wide range of high energy physics (HEP) applications.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
Resolving the controversy in biexciton binding energy of cesium lead halide perovskite nanocrystals through heralded single-particle spectroscopy
Authors:
Gur Lubin,
Gili Yaniv,
Miri Kazes,
Arin Can Ulku,
Ivan Michel Antolovic,
Samuel Burri,
Claudio Bruschini,
Edoardo Charbon,
Venkata Jayasurya Yallapragada,
Dan Oron
Abstract:
Understanding exciton-exciton interaction in multiply-excited nanocrystals is crucial to their utilization as functional materials. Yet, for lead halide perovskite nanocrystals, which are promising candidates for nanocrystal-based technologies, numerous contradicting values have been reported for the strength and sign of their exciton-exciton interaction. In this work we unambiguously determine th…
▽ More
Understanding exciton-exciton interaction in multiply-excited nanocrystals is crucial to their utilization as functional materials. Yet, for lead halide perovskite nanocrystals, which are promising candidates for nanocrystal-based technologies, numerous contradicting values have been reported for the strength and sign of their exciton-exciton interaction. In this work we unambiguously determine the biexciton binding energy in single cesium lead halide perovskite nanocrystals at room temperature. This is enabled by the recently introduced SPAD array spectrometer, capable of temporally isolating biexciton-exciton emission cascades while retaining spectral resolution. We demonstrate that CsPbBr$_3$ nanocrystals feature an attractive exciton-exciton interaction, with a mean biexciton binding energy of 10 meV. For CsPbI$_3$ nanocrystals we observe a mean biexciton binding energy that is close to zero, and individual nanocrystals show either weakly attractive or weakly repulsive exciton-exciton interaction. We further show that within ensembles of both materials, single-nanocrystal biexciton binding energies are correlated with the degree of charge-carrier confinement.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
Heralded spectroscopy reveals exciton-exciton correlations in single colloidal quantum dots
Authors:
Gur Lubin,
Ron Tenne,
Arin Can Ulku,
Ivan Michel Antolovic,
Samuel Burri,
Sean Karg,
Venkata Jayasurya Yallapragada,
Claudio Bruschini,
Edoardo Charbon,
Dan Oron
Abstract:
Multiply-excited states in semiconductor quantum dots feature intriguing physics and play a crucial role in nanocrystal-based technologies. While photoluminescence provides a natural probe to investigate these states, room temperature single-particle spectroscopy of their emission has so far proved elusive due to the temporal and spectral overlap with emission from the singly-excited and charged s…
▽ More
Multiply-excited states in semiconductor quantum dots feature intriguing physics and play a crucial role in nanocrystal-based technologies. While photoluminescence provides a natural probe to investigate these states, room temperature single-particle spectroscopy of their emission has so far proved elusive due to the temporal and spectral overlap with emission from the singly-excited and charged states. Here we introduce biexciton heralded spectroscopy, enabled by a single-photon avalanche diode array based spectrometer. This allows us to directly observe biexciton-exciton emission cascades and measure the biexciton binding energy of single quantum dots at room temperature, even though it is well below the scale of thermal broadening and spectral diffusion. Furthermore, we uncover correlations hitherto masked in ensembles, of the biexciton binding energy with both charge-carrier confinement and fluctuations of the local electrostatic potential. Heralded spectroscopy has the potential of greatly extending our understanding of charge-carrier dynamics in multielectron systems and of parallelization of quantum optics protocols.
△ Less
Submitted 31 July, 2021;
originally announced August 2021.
-
A massively scalable Time-to-Digital Converter with a PLL-free calibration system in a commercial 130 nm process
Authors:
Fulvio Martinelli,
Pierpaolo Valerio,
Roberto Cardarelli,
Edoardo Charbon,
Giuseppe Iacobucci,
Marzio Nessi,
Lorenzo Paolozzi
Abstract:
A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along with an analytical model of linearity. The model allowed us to understand the source of the performance superiority (in terms of linearity) of our design and to pr…
▽ More
A 33.6 ps LSB Time-to-Digital converter was designed in 130 nm BiCMOS technology. The core of the converter is a differential 9-stage ring oscillator, based on a multi-path architecture. A novel version of this design is proposed, along with an analytical model of linearity. The model allowed us to understand the source of the performance superiority (in terms of linearity) of our design and to predict further improvements. The oscillator is integrated in a event-by-event self-calibration system that allows avoiding any PLL-based synchronization. For this reason and for the compactness and simplicity of the architecture, the proposed TDC is suitable for applications in which a large number of converters and a massive parallelization are required such as High-Energy Physics and medical imaging detector systems. A test chip for the TDC has been fabricated and tested. The TDC shows a DNL$\leq$1.3 LSB, an INL$\leq$2 LSB and a single-shot precision of 19.5 ps (0.58 LSB). The chip dissipates a power of 5.4 mW overall.
△ Less
Submitted 1 September, 2021; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Towards quantum 3D imaging devices: the Qu3D project
Authors:
Cristoforo Abbattista,
Leonardo Amoruso,
Samuel Burri,
Edoardo Charbon,
Francesco Di Lena,
Augusto Garuccio,
Davide Giannella,
Zdenek Hradil,
Michele Iacobellis,
Gianlorenzo Massaro,
Paul Mos,
Libor Motka,
Martin Paur,
Francesco V. Pepe,
Michal Peterek,
Isabella Petrelli,
Jaroslav Rehacek,
Francesca Santoro,
Francesco Scattarella,
Arin Ulku,
Sergii Vasiukov,
Michael Wayne,
Milena D'Angelo,
Claudio Bruschini,
Maria Ieronymaki
, et al. (1 additional authors not shown)
Abstract:
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in stan…
▽ More
We review the advancement of the research toward the design and implementation of quantum plenoptic cameras, radically novel 3D imaging devices that exploit both momentum-position entanglement and photon-number correlations to provide the typical refocusing and ultra-fast, scanning-free, 3D imaging capability of plenoptic devices, along with dramatically enhanced performances, unattainable in standard plenoptic cameras: diffraction-limited resolution, large depth of focus, and ultra-low noise. To further increase the volumetric resolution beyond the Rayleigh diffraction limit, and achieve the quantum limit, we are also developing dedicated protocols based on quantum Fisher information. However, for the quantum advantages of the proposed devices to be effective and appealing to end-users, two main challenges need to be tackled. First, due to the large number of frames required for correlation measurements to provide an acceptable SNR, quantum plenoptic imaging would require, if implemented with commercially available high-resolution cameras, acquisition times ranging from tens of seconds to a few minutes. Second, the elaboration of this large amount of data, in order to retrieve 3D images or refocusing 2D images, requires high-performance and time-consuming computation. To address these challenges, we are developing high-resolution SPAD arrays and high-performance low-level programming of ultra-fast electronics, combined with compressive sensing and quantum tomography algorithms, with the aim to reduce both the acquisition and the elaboration time by two orders of magnitude. Routes toward exploitation of the QPI devices will also be discussed.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Integrated multiplexed microwave readout of silicon quantum dots in a cryogenic CMOS chip
Authors:
Andrea Ruffino,
Tsung-Yeh Yang,
John Michniewicz,
Yatao Peng,
Edoardo Charbon,
Miguel Fernando Gonzalez-Zalba
Abstract:
Solid-state quantum computers require classical electronics to control and readout individual qubits and to enable fast classical data processing [1-3]. Integrating both subsystems at deep cryogenic temperatures [4], where solid-state quantum processors operate best, may solve some major scaling challenges, such as system size and input/output (I/O) data management [5]. Spin qubits in silicon quan…
▽ More
Solid-state quantum computers require classical electronics to control and readout individual qubits and to enable fast classical data processing [1-3]. Integrating both subsystems at deep cryogenic temperatures [4], where solid-state quantum processors operate best, may solve some major scaling challenges, such as system size and input/output (I/O) data management [5]. Spin qubits in silicon quantum dots (QDs) could be monolithically integrated with complementary metal-oxide-semiconductor (CMOS) electronics using very-large-scale integration (VLSI) and thus leveraging over wide manufacturing experience in the semiconductor industry [6]. However, experimental demonstrations of integration using industrial CMOS at mK temperatures are still in their infancy. Here we present a cryogenic integrated circuit (IC) fabricated using industrial CMOS technology that hosts three key ingredients of a silicon-based quantum processor: QD arrays (arranged here in a non-interacting 3x3 configuration), digital electronics to minimize control lines using row-column addressing and analog LC resonators for multiplexed readout, all operating at 50 mK. With the microwave resonators (6-8 GHz range), we show dispersive readout of the charge state of the QDs and perform combined time- and frequency-domain multiplexing, enabling scalable readout while reducing the overall chip footprint. This modular architecture probes the limits towards the realization of a large-scale silicon quantum computer integrating quantum and classical electronics using industrial CMOS technology.
△ Less
Submitted 20 January, 2021;
originally announced January 2021.
-
CMOS-based cryogenic control of silicon quantum circuits
Authors:
Xiao Xue,
Bishnu Patra,
Jeroen P. G. van Dijk,
Nodar Samkharadze,
Sushil Subramanian,
Andrea Corna,
Charles Jeon,
Farhana Sheikh,
Esdras Juarez-Hernandez,
Brando Perez Esparza,
Huzaifa Rampurawala,
Brent Carlton,
Surej Ravikumar,
Carlos Nieva,
Sungwon Kim,
Hyung-Jin Lee,
Amir Sammak,
Giordano Scappucci,
Menno Veldhorst,
Fabio Sebastiano,
Masoud Babaie,
Stefano Pellerano,
Edoardo Charbon,
Lieven M. K. Vandersypen
Abstract:
The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced l…
▽ More
The most promising quantum algorithms require quantum processors hosting millions of quantum bits when targeting practical applications. A major challenge towards large-scale quantum computation is the interconnect complexity. In current solid-state qubit implementations, a major bottleneck appears between the quantum chip in a dilution refrigerator and the room temperature electronics. Advanced lithography supports the fabrication of both CMOS control electronics and qubits in silicon. When the electronics are designed to operate at cryogenic temperatures, it can ultimately be integrated with the qubits on the same die or package, overcoming the wiring bottleneck. Here we report a cryogenic CMOS control chip operating at 3K, which outputs tailored microwave bursts to drive silicon quantum bits cooled to 20mK. We first benchmark the control chip and find electrical performance consistent with 99.99% fidelity qubit operations, assuming ideal qubits. Next, we use it to coherently control actual silicon spin qubits and find that the cryogenic control chip achieves the same fidelity as commercial instruments. Furthermore, we highlight the extensive capabilities of the control chip by programming a number of benchmarking protocols as well as the Deutsch-Josza algorithm on a two-qubit quantum processor. These results open up the path towards a fully integrated, scalable silicon-based quantum computer.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Quantum illumination imaging with a single-photon avalanche diode camera
Authors:
Hugo Defienne,
Jiuxuan Zhao,
Edoardo Charbon,
Daniele Faccio
Abstract:
Single-photon-avalanche diode (SPAD) arrays are essential tools in biophotonics, optical ranging and sensing and quantum optics. However, their small number of pixels, low quantum efficiency and small fill factor have so far hindered their use for practical imaging applications. Here, we demonstrate full-field entangled photon pair correlation imaging using a 100-kpixels SPAD camera. By measuring…
▽ More
Single-photon-avalanche diode (SPAD) arrays are essential tools in biophotonics, optical ranging and sensing and quantum optics. However, their small number of pixels, low quantum efficiency and small fill factor have so far hindered their use for practical imaging applications. Here, we demonstrate full-field entangled photon pair correlation imaging using a 100-kpixels SPAD camera. By measuring photon coincidences between more than 500 million pairs of positions, we retrieve the full point spread function of the imaging system and subsequently high-resolution images of target objects illuminated by spatially entangled photon pairs. We show that our imaging approach is robust against stray light, enabling quantum imaging technologies to move beyond laboratory experiments towards real-world applications such as quantum LiDAR.
△ Less
Submitted 31 July, 2020;
originally announced July 2020.
-
Superluminal Motion-Assisted 4-Dimensional Light-in-Flight Imaging
Authors:
Kazuhiro Morimoto,
Ming-Lo Wu,
Andrei Ardelean,
Edoardo Charbon
Abstract:
Advances in high speed imaging techniques have opened new possibilities for capturing ultrafast phenomena such as light propagation in air or through media. Capturing light-in-flight in 3-dimensional xyt-space has been reported based on various types of imaging systems, whereas reconstruction of light-in-flight information in the fourth dimension z has been a challenge. We demonstrate the first 4-…
▽ More
Advances in high speed imaging techniques have opened new possibilities for capturing ultrafast phenomena such as light propagation in air or through media. Capturing light-in-flight in 3-dimensional xyt-space has been reported based on various types of imaging systems, whereas reconstruction of light-in-flight information in the fourth dimension z has been a challenge. We demonstrate the first 4-dimensional light-in-flight imaging based on the observation of a superluminal motion captured by a new time-gated megapixel single-photon avalanche diode camera. A high resolution light-in-flight video is generated with no laser scanning, camera translation, interpolation, nor dark noise subtraction. A machine learning technique is applied to analyze the measured spatio-temporal data set. A theoretical formula is introduced to perform least-square regression, and extra-dimensional information is recovered without prior knowledge. The algorithm relies on the mathematical formulation equivalent to the superluminal motion in astrophysics, which is scaled by a factor of a quadrillionth. The reconstructed light-in-flight trajectory shows a good agreement with the actual geometry of the light path. Our approach could potentially provide novel functionalities to high speed imaging applications such as non-line-of-sight imaging and time-resolved optical tomography.
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
Quantum Transport in 40-nm MOSFETs at Deep-Cryogenic Temperatures
Authors:
Tsung-Yeh Yang,
Andrea Ruffino,
John Michniewicz,
Yatao Peng,
Edoardo Charbon,
M. Fernando Gonzalez-Zalba
Abstract:
In this letter, we characterize the electrical properties of commercial bulk 40-nm MOSFETs at room and deep cryogenic temperatures, with a focus on quantum information processing (QIP) applications. At 50 mK, the devices operate as classical FETs or quantum dot devices when either a high or low drain bias is applied, respectively. The operation in classical regime shows improved transconductance a…
▽ More
In this letter, we characterize the electrical properties of commercial bulk 40-nm MOSFETs at room and deep cryogenic temperatures, with a focus on quantum information processing (QIP) applications. At 50 mK, the devices operate as classical FETs or quantum dot devices when either a high or low drain bias is applied, respectively. The operation in classical regime shows improved transconductance and subthreshold slope with respect to 300 K. In the quantum regime, all measured devices show Coulomb blockade. This is explained by the formation of quantum dots in the channel, for which a model is proposed. The variability in parameters, important for quantum computing scaling, is also quantified. Our results show that bulk 40-nm node MOSFETs can be readily used for the co-integration of cryo-CMOS classical-quantum circuits at deep cryogenic temperatures and that the variability approaches the uniformity requirements to enable shared control.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
A megapixel time-gated SPAD image sensor for 2D and 3D imaging applications
Authors:
Kazuhiro Morimoto,
Andrei Ardelean,
Ming-Lo Wu,
Arin Can Ulku,
Ivan Michel Antolovic,
Claudio Bruschini,
Edoardo Charbon
Abstract:
We present the first 1Mpixel SPAD camera ever reported. The camera features 3.8ns time gating and 24kfps frame rate; it was fabricated in 180nm CIS technology. Two pixels have been designed with a pitch of 9.4$μ$m in 7T and 5.75T configurations, respectively, achieving a maximum fill factor of 13.4%. The maximum PDP is 27%, median DCR 2.0cps, variation in gating length 120ps, position skew 410ps,…
▽ More
We present the first 1Mpixel SPAD camera ever reported. The camera features 3.8ns time gating and 24kfps frame rate; it was fabricated in 180nm CIS technology. Two pixels have been designed with a pitch of 9.4$μ$m in 7T and 5.75T configurations, respectively, achieving a maximum fill factor of 13.4%. The maximum PDP is 27%, median DCR 2.0cps, variation in gating length 120ps, position skew 410ps, and rise/fall time <550ps, all FWHM at 3.3V of excess bias. The sensor was used to capture 2D/3D scenes over 2m with an LSB of 5.4mm and a precision better than 7.8mm. Extended dynamic range is demonstrated in dual exposure operation mode. Spatially overlapped multi-object detection is experimentally demonstrated in single-photon time-gated ToF for the first time.
△ Less
Submitted 30 December, 2019;
originally announced December 2019.
-
Characterization and Analysis of On-Chip Microwave Passive Components at Cryogenic Temperatures
Authors:
Bishnu Patra,
Mohammadreza Mehrpoo,
Andrea Ruffino,
Fabio Sebastiano,
Edoardo Charbon,
Masoud Babaie
Abstract:
This paper presents the characterization of microwave passive components, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep cryogenic temperature (4.2 K). The variations in capacitance, inductance and quality factor are explained in relation to the temperature dependence of the physical parameters and the resulting insights on modeling of passives at cryogenic tem…
▽ More
This paper presents the characterization of microwave passive components, including metal-oxide-metal (MoM) capacitors, transformers, and resonators, at deep cryogenic temperature (4.2 K). The variations in capacitance, inductance and quality factor are explained in relation to the temperature dependence of the physical parameters and the resulting insights on modeling of passives at cryogenic temperatures are provided. Both characterization and modeling, reported for the first time down to 4.2 K, are essential in designing cryogenic CMOS radio-frequency integrated circuits, a promising candidate to build the electronic interface for scalable quantum computers.
△ Less
Submitted 29 November, 2019;
originally announced November 2019.
-
Quantum correlation measurement with single photon avalanche diode arrays
Authors:
Gur Lubin,
Ron Tenne,
Ivan Michel Antolovic,
Edoardo Charbon,
Claudio Bruschini,
Dan Oron
Abstract:
Temporal photon correlation measurement, instrumental to probing the quantum properties of light, typically requires multiple single photon detectors. Progress in single photon avalanche diode (SPAD) array technology highlights their potential as high performance detector arrays for quantum imaging and photon number resolving (PNR) experiments. Here, we demonstrate this potential by incorporating…
▽ More
Temporal photon correlation measurement, instrumental to probing the quantum properties of light, typically requires multiple single photon detectors. Progress in single photon avalanche diode (SPAD) array technology highlights their potential as high performance detector arrays for quantum imaging and photon number resolving (PNR) experiments. Here, we demonstrate this potential by incorporating a novel on-chip SPAD array with 55% peak photon detection probability, low dark count rate and crosstalk probability of 0.14% per detection, in a confocal microscope. This enables reliable measurements of second and third order photon correlations from a single quantum dot emitter. Our analysis overcomes the inter-detector optical crosstalk background even though it is over an order of magnitude larger than our faint signal. To showcase the vast application space of such an approach, we implement a recently introduced super-resolution imaging method, quantum image scanning microscopy (Q-ISM).
△ Less
Submitted 3 October, 2019;
originally announced October 2019.
-
Single-photon SPAD imagers in biophotonics: Review and Outlook
Authors:
Claudio Bruschini,
Harald Homulle,
Ivan Michel Antolovic,
Samuel Burri,
Edoardo Charbon
Abstract:
Single-photon avalanche diode (SPAD) arrays are solid-state detectors offering imaging capabilities at the level of individual photons, with unparalleled photon counting and time-resolved performance. This fascinating technology has progressed at very high pace in the past 15~years, since its inception in standard CMOS technology in 2003. A host of architectures has been explored, ranging from sim…
▽ More
Single-photon avalanche diode (SPAD) arrays are solid-state detectors offering imaging capabilities at the level of individual photons, with unparalleled photon counting and time-resolved performance. This fascinating technology has progressed at very high pace in the past 15~years, since its inception in standard CMOS technology in 2003. A host of architectures has been explored, ranging from simpler implementations, based solely on off-chip data processing, to progressively ``smarter" sensors including on-chip, or even pixel-level, timestamping and processing capabilities. As the technology matured, a range of biophotonics applications has been explored, including (endoscopic) FLIM, (multi-beam multiphoton) FLIM-FRET, SPIM-FCS, super-resolution microscopy, time-resolved Raman, NIROT, and PET. We will review some representative sensors and their corresponding applications, including the most relevant challenges faced by chip designers and end-users. Finally, we will provide an outlook on the future of this fascinating technology.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
FPGA Design Techniques for Stable Cryogenic Operation
Authors:
Harald Homulle,
Stefan Visser,
Bishnu Patra,
Edoardo Charbon
Abstract:
In this paper we show how a deep-submicron FPGA can be modified to operate at extremely low temperatures through modifications in the supporting hardware and in the firmware programming it. Though FPGAs are not designed to operate at a few Kelvin, it is possible to do so on virtue of the extremely high doping levels found in deep-submicron CMOS technology nodes. First, any PCB component, that does…
▽ More
In this paper we show how a deep-submicron FPGA can be modified to operate at extremely low temperatures through modifications in the supporting hardware and in the firmware programming it. Though FPGAs are not designed to operate at a few Kelvin, it is possible to do so on virtue of the extremely high doping levels found in deep-submicron CMOS technology nodes. First, any PCB component, that does not conform with this requirement, is removed. Both the majority of decoupling capacitor types and voltage regulators are not well behaved at cryogenic temperatures, asking for an ad-hoc solution to stabilize the FPGA supply voltage, especially for sensitive applications. Therefore, we have designed a firmware that enforces a constant power consumption, so as to stabilize the supply voltage in the interior of the FPGA chip. The FPGA is powered with a supply at several meters distance, causing significant IR drop and thus fluctuations on the local supply voltage. To achieve the stabilization, the variation in digital logic speed, which directly corresponds to changes in supply voltage, is constantly measured and corrected for through a tunable oscillator farm, implemented on the FPGA. The method is versatile and robust, enabling seamless porting to other FPGA families and configurations.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
A Reconfigurable Cryogenic Platform for the Classical Control of Scalable Quantum Computers
Authors:
Harald Homulle,
Stefan Visser,
Bishnu Patra,
Giorgio Ferrari,
Enrico Prati,
Fabio Sebastiano,
Edoardo Charbon
Abstract:
Recent advances in solid-state qubit technology are paving the way to fault-tolerant quantum computing systems. However, qubit technology is limited by qubit coherence time and by the complexity of coupling the quantum system with a classical electronic infrastructure.
We propose an infrastructure, enabling to read and control qubits, that is implemented on a field-programmable gate array (FPGA)…
▽ More
Recent advances in solid-state qubit technology are paving the way to fault-tolerant quantum computing systems. However, qubit technology is limited by qubit coherence time and by the complexity of coupling the quantum system with a classical electronic infrastructure.
We propose an infrastructure, enabling to read and control qubits, that is implemented on a field-programmable gate array (FPGA). The FPGA platform supports functionality required by several qubit technologies and can operate physically close to the qubits over a temperature range from 4K to 300K. Extensive characterization of the platform over this temperature range revealed all major components (such as LUTs, MMCM, PLL, BRAM, IDELAY2) operate correctly and the logic speed is very stable. The stability is finally concretized by operating an integrated ADC with relatively stable performance over temperature.
△ Less
Submitted 24 April, 2017; v1 submitted 18 February, 2016;
originally announced February 2016.
-
FPGA implementation of a 32x32 autocorrelator array for analysis of fast image series
Authors:
Jan Buchholz,
Jan Wolfgang Krieger,
Gábor Mocsár,
Balázs Kreith,
Edoardo Charbon,
György Vámosi,
Udo Kebschull,
Jörg Langowski
Abstract:
With the evolving technology in CMOS integration, new classes of 2D-imaging detectors have recently become available. In particular, single photon avalanche diode (SPAD) arrays allow detection of single photons at high acquisition rates (\geq 100 kfps), which is about two orders of magnitude higher than with currently available cameras. Here we demonstrate the use of a SPAD array for imaging fluor…
▽ More
With the evolving technology in CMOS integration, new classes of 2D-imaging detectors have recently become available. In particular, single photon avalanche diode (SPAD) arrays allow detection of single photons at high acquisition rates (\geq 100 kfps), which is about two orders of magnitude higher than with currently available cameras. Here we demonstrate the use of a SPAD array for imaging fluorescence correlation spectroscopy (imFCS), a tool to create 2D maps of the dynamics of fluorescent molecules inside living cells. Time-dependent fluorescence fluctuations, due to fluorophores entering and leaving the observed pixels, are evaluated by means of autocorrelation analysis. The multi-τ correlation algorithm is an appropriate choice, as it does not rely on the full data set to be held in memory. Thus, this algorithm can be efficiently implemented in custom logic. We describe a new implementation for massively parallel multi-τ correlation hardware. Our current implementation can calculate 1024 correlation functions at a resolution of 10μs in real-time and therefore correlate real-time image streams from high speed single photon cameras with thousands of pixels.
△ Less
Submitted 7 December, 2011;
originally announced December 2011.
-
Fast fluorescence dynamics in non-ratiometric calcium indicators
Authors:
M. Gersbach,
D. L. Boiko,
C. Niclass,
C. Petersen,
E. Charbon
Abstract:
A fluorescence decay of high-affinity non-ratiometric Ca2+ indicator Oregon Green BAPTA-1 (OGB-1) is analyzed with unprecedented temporal resolution in the two-photon excitation regime. A triple exponential decay is shown to best fit the fluorescence dynamics of OGB-1. We provide a new model for accurate measurements of the free Ca2+ concentration and dissociation constants of non-ratiometric ca…
▽ More
A fluorescence decay of high-affinity non-ratiometric Ca2+ indicator Oregon Green BAPTA-1 (OGB-1) is analyzed with unprecedented temporal resolution in the two-photon excitation regime. A triple exponential decay is shown to best fit the fluorescence dynamics of OGB-1. We provide a new model for accurate measurements of the free Ca2+ concentration and dissociation constants of non-ratiometric calcium indicators.
△ Less
Submitted 13 November, 2008; v1 submitted 17 July, 2008;
originally announced July 2008.
