-
Using graph neural networks to reconstruct charged pion showers in the CMS High Granularity Calorimeter
Authors:
M. Aamir,
B. Acar,
G. Adamov,
T. Adams,
C. Adloff,
S. Afanasiev,
C. Agrawal,
C. Agrawal,
A. Ahmad,
H. A. Ahmed,
S. Akbar,
N. Akchurin,
B. Akgul,
B. Akgun,
R. O. Akpinar,
E. Aktas,
A. AlKadhim,
V. Alexakhin,
J. Alimena,
J. Alison,
A. Alpana,
W. Alshehri,
P. Alvarez Dominguez,
M. Alyari,
C. Amendola
, et al. (550 additional authors not shown)
Abstract:
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadr…
▽ More
A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.
△ Less
Submitted 30 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Deep learning applications for quality control in particle detector construction
Authors:
N. Akchurin,
J. Damgov,
S. Dugad,
P. G C,
S. Grönroos,
K. Lamichhane,
J. Martinez,
T. Quast,
S. Undleeb,
A. Whitbeck
Abstract:
The growing complexity of particle detectors makes their construction and quality control a new challenge. We present studies that explore the use of deep learning-based computer vision techniques to perform quality checks of detector components and assembly steps, which will automate procedures and minimize the need for human interventions. This study focuses on the construction steps of a silico…
▽ More
The growing complexity of particle detectors makes their construction and quality control a new challenge. We present studies that explore the use of deep learning-based computer vision techniques to perform quality checks of detector components and assembly steps, which will automate procedures and minimize the need for human interventions. This study focuses on the construction steps of a silicon detector, which involve forming a mechanical structure with the sensor and wire bonding individual cells to electronics for reading out signals. Silicon detectors in high energy physics experiments today have millions of channels. Manual quality control of these and other high channel-density detectors requires enormous amounts of labor and can be prone to errors. Here, we explore computer vision applications to either augment or fully replace visual inspections done by humans. We investigated convolutional neural networks for image classification and autoencoders for anomalies detection. Two proof-of-concept studies will be presented.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Dual-Readout Calorimetry for Future Experiments Probing Fundamental Physics
Authors:
I. Pezzotti,
Harvey Newman,
J. Freeman,
J. Hirschauer,
R. Ferrari,
G. Gaudio,
G. Polesello,
R. Santoro,
M. Lucchini,
S. Giagu,
F. Bedeschi,
Sehwook Lee,
P. Harris,
C. Tully,
A. Jung,
Nural Akchurin,
A. Belloni,
S. Eno,
J. Qian,
B. Zhou,
J. Zhu,
Jason Sang Hun Lee,
I. Vivarelli,
R. Hirosky,
Hwidong Yoo
Abstract:
In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in their active material, dual-readout calorimeters aim to provide additional information on the light produced in the sensitive media via, for example, wavelength and polarization, and/or a precision timing measurements,…
▽ More
In this White Paper for the 2021 Snowmass process, we detail the status and prospects for dual-readout calorimetry. While all calorimeters allow estimation of energy depositions in their active material, dual-readout calorimeters aim to provide additional information on the light produced in the sensitive media via, for example, wavelength and polarization, and/or a precision timing measurements, allowing an estimation of the shower-by-shower particle content. Utilizing this knowledge of the shower particle content may allow unprecedented energy resolution for hadronic particles and jets and new types of particle flow algorithms. We also discuss the impact continued development of this kind of calorimetry could have on precision on Higgs boson property measurements at future colliders.
△ Less
Submitted 4 May, 2022; v1 submitted 8 March, 2022;
originally announced March 2022.
-
Response of a CMS HGCAL silicon-pad electromagnetic calorimeter prototype to 20-300 GeV positrons
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
F. Alam Khan,
M. Alhusseini,
J. Alison,
A. Alpana,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
P. Aspell,
I. O. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
S. Bannerjee,
P. Bargassa,
D. Barney,
F. Beaudette
, et al. (364 additional authors not shown)
Abstract:
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glu…
▽ More
The Compact Muon Solenoid Collaboration is designing a new high-granularity endcap calorimeter, HGCAL, to be installed later this decade. As part of this development work, a prototype system was built, with an electromagnetic section consisting of 14 double-sided structures, providing 28 sampling layers. Each sampling layer has an hexagonal module, where a multipad large-area silicon sensor is glued between an electronics circuit board and a metal baseplate. The sensor pads of approximately 1 cm$^2$ are wire-bonded to the circuit board and are readout by custom integrated circuits. The prototype was extensively tested with beams at CERN's Super Proton Synchrotron in 2018. Based on the data collected with beams of positrons, with energies ranging from 20 to 300 GeV, measurements of the energy resolution and linearity, the position and angular resolutions, and the shower shapes are presented and compared to a detailed Geant4 simulation.
△ Less
Submitted 31 March, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Perspectives on the Calibration of CNN Energy Reconstruction in Highly Granular Calorimeters
Authors:
N. Akchurin,
C. Cowden,
J. Damgov,
A. Hussain,
S. Kunori
Abstract:
We present a study which shows encouraging stability of the response linearity for a simulated high granularity calorimeter module reconstructed by a CNN model to miscalibration, bias, and noise effects. Our results also show an intuitive, quantifiable relationship between these factors and the calibration parameters. We trained a CNN model to reconstruct energy in the calorimeter module using sim…
▽ More
We present a study which shows encouraging stability of the response linearity for a simulated high granularity calorimeter module reconstructed by a CNN model to miscalibration, bias, and noise effects. Our results also show an intuitive, quantifiable relationship between these factors and the calibration parameters. We trained a CNN model to reconstruct energy in the calorimeter module using simulated single-pion events; we then observed the response of the model under various miscalibration, bias, and noise conditions that affected the model input. From these data, we estimated linear response models to calibrate the CNN. We also quantified the relationship between these factors and the calibration parameters by regression analysis.
△ Less
Submitted 8 August, 2022; v1 submitted 24 August, 2021;
originally announced August 2021.
-
On the Use of Neural Networks for Energy Reconstruction in High-granularity Calorimeters
Authors:
N. Akchurin,
C. Cowden,
J. Damgov,
A. Hussain,
S. Kunori
Abstract:
We contrasted the performance of deep neural networks - Convolutional Neural Network (CNN) and Graph Neural Network (GNN) - to current state of the art energy regression methods in a finely 3D-segmented calorimeter simulated by GEANT4. This comparative benchmark gives us some insight to assess the particular latent signals neural network methods exploit to achieve superior resolution. A CNN traine…
▽ More
We contrasted the performance of deep neural networks - Convolutional Neural Network (CNN) and Graph Neural Network (GNN) - to current state of the art energy regression methods in a finely 3D-segmented calorimeter simulated by GEANT4. This comparative benchmark gives us some insight to assess the particular latent signals neural network methods exploit to achieve superior resolution. A CNN trained solely on a pure sample of pions achieved substantial improvement in the energy resolution for both single pions and jets over the conventional approaches. It maintained good performance for electron and photon reconstruction. We also used the Graph Neural Network (GNN) with edge convolution to assess the importance of timing information in the shower development for improved energy reconstruction. We implement a simple simulation based correction to the energy sum derived from the fraction of energy deposited in the electromagnetic shower component. This serves as an approximate dual-readout analogue for our benchmark comparison. Although this study does not include the simulation of detector effects, such as electronic noise, the margin of improvement seems robust enough to suggest these benefits will endure in real-world application. We also find reason to infer that the CNN/GNN methods leverage latent features that concur with our current understanding of the physics of calorimeter measurement.
△ Less
Submitted 4 January, 2022; v1 submitted 21 July, 2021;
originally announced July 2021.
-
Construction and commissioning of CMS CE prototype silicon modules
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modul…
▽ More
As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype
Authors:
B. Acar,
G. Adamov,
C. Adloff,
S. Afanasiev,
N. Akchurin,
B. Akgün,
M. Alhusseini,
J. Alison,
G. Altopp,
M. Alyari,
S. An,
S. Anagul,
I. Andreev,
M. Andrews,
P. Aspell,
I. A. Atakisi,
O. Bach,
A. Baden,
G. Bakas,
A. Bakshi,
P. Bargassa,
D. Barney,
E. Becheva,
P. Behera,
A. Belloni
, et al. (307 additional authors not shown)
Abstract:
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endca…
▽ More
The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.
△ Less
Submitted 8 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Cerium-Doped Fused-Silica Fibers as Wavelength Shifters
Authors:
N. Akchurin,
N. Bartosik,
J. Damgov,
F. De Guio,
G. Dissertori,
E. Kendir,
S. Kunori,
T. Mengke,
F. Nessi-Tedaldi,
N. Pastrone,
S. Pigazzini,
Ş. Yaltkayab
Abstract:
We have evaluated the performance of a Ce-doped fused-silica fiber as wavelength shifter coupled to a CeF$_{3}$ crystal using electron beams at CERN. The pulse shape and collection efficiency were measured using irradiated (100 kGy) and un-irradiated fibers. In addition, we evaluated the light yield of various Ce-doped fibers and explored the possibility of using them in the future, including for…
▽ More
We have evaluated the performance of a Ce-doped fused-silica fiber as wavelength shifter coupled to a CeF$_{3}$ crystal using electron beams at CERN. The pulse shape and collection efficiency were measured using irradiated (100 kGy) and un-irradiated fibers. In addition, we evaluated the light yield of various Ce-doped fibers and explored the possibility of using them in the future, including for precision timing applications in a high-luminosity collider environment.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum
Authors:
Daniel Abercrombie,
Nural Akchurin,
Ece Akilli,
Juan Alcaraz Maestre,
Brandon Allen,
Barbara Alvarez Gonzalez,
Jeremy Andrea,
Alexandre Arbey,
Georges Azuelos,
Patrizia Azzi,
Mihailo Backović,
Yang Bai,
Swagato Banerjee,
James Beacham,
Alexander Belyaev,
Antonio Boveia,
Amelia Jean Brennan,
Oliver Buchmueller,
Matthew R. Buckley,
Giorgio Busoni,
Michael Buttignol,
Giacomo Cacciapaglia,
Regina Caputo,
Linda Carpenter,
Nuno Filipe Castro
, et al. (114 additional authors not shown)
Abstract:
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of t…
▽ More
This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations.
△ Less
Submitted 3 July, 2015;
originally announced July 2015.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Dual-readout Calorimetry
Authors:
N. Akchurin,
F. Bedeschi,
A. Cardini,
M. Cascella,
F. Cei,
D. De Pedis,
S. Fracchia,
S. Franchino,
M. Fraternali,
G. Gaudio,
P. Genova,
J. Hauptman,
L. La Rotonda,
S. Lee,
M. Livan,
E. Meoni,
A. Moggi,
D. Pinci,
A. Policicchio,
J. G. Saraiva,
A. Sill,
T. Venturelli,
R. Wigmans
Abstract:
The RD52 Project at CERN is a pure instrumentation experiment whose goal is to understand the fundamental limitations to hadronic energy resolution, and other aspects of energy measurement, in high energy calorimeters. We have found that dual-readout calorimetry provides heretofore unprecedented information event-by-event for energy resolution, linearity of response, ease and robustness of calibra…
▽ More
The RD52 Project at CERN is a pure instrumentation experiment whose goal is to understand the fundamental limitations to hadronic energy resolution, and other aspects of energy measurement, in high energy calorimeters. We have found that dual-readout calorimetry provides heretofore unprecedented information event-by-event for energy resolution, linearity of response, ease and robustness of calibration, fidelity of data, and particle identification, including energy lost to binding energy in nuclear break-up. We believe that hadronic energy resolutions of σ/E $\approx$ 1 - 2% are within reach for dual-readout calorimeters, enabling for the first time comparable measurement preci- sions on electrons, photons, muons, and quarks (jets). We briefly describe our current progress and near-term future plans. Complete information on all aspects of our work is available at the RD52 website http://highenergy.phys.ttu.edu/dream/.
△ Less
Submitted 30 July, 2013; v1 submitted 21 July, 2013;
originally announced July 2013.
-
Another Detector for the International Linear Collider
Authors:
Nural Akchurin,
Sehwook Lee,
Richard Wigmans,
Hanna Arnold,
Aaron Bazal,
Robert Basili,
John Hauptman,
Tim Overton,
Andrew Priest,
Bingzhe Zhao,
Alexander Mikhailichenko,
Michele Cascella,
Franco Grancagnolo,
Giovanni Tassielli,
Franco Bedeschi,
Fabrizio Scuri,
Sung Keun Park,
Fedor Ignatov,
Gabriella Gaudio,
Michele Livan
Abstract:
We describe another detectora designed for the International Linear Collider based on several tested instrumentation innovations in order to achieve the necessary experi- mental goal of a detecter that is 2-to-10 times better than the already excellent SLC and LEP detectors, in particular, (1) dual-readout calorimeter system based on the RD52/DREAM measurements at CERN, (2) a cluster-counting drif…
▽ More
We describe another detectora designed for the International Linear Collider based on several tested instrumentation innovations in order to achieve the necessary experi- mental goal of a detecter that is 2-to-10 times better than the already excellent SLC and LEP detectors, in particular, (1) dual-readout calorimeter system based on the RD52/DREAM measurements at CERN, (2) a cluster-counting drift chamber based on the successful kloe chamber at Frascati, and (3) a second solenoid to return the magnetic flux without iron. A high-performance pixel vertex chamber is presently undefined. We discuss particle identification, momentum and energy resolutions, and the machine-detector interface that together offer the possibility of a very high-performance detector for $e^+e^-$physics up to $\sqrt{s} = 1$ TeV.
△ Less
Submitted 24 July, 2013; v1 submitted 21 July, 2013;
originally announced July 2013.
-
The 4th Concept Detector for the International Linear Collider
Authors:
Sung Keun Park,
Franco Grancagnolo,
John Hauptman,
Alexander Mikhailichenko,
Nural Akchurin
Abstract:
The 4th Concept detector presently being designed for the International Linear Collider introduces several innovations in order to achieve the necessary experimental goal of a detecter that is 2-to-10 times better than the already excellent SLC and LEP detectors. We introduce a dual-readout calorimeter system, a cluster counting drift chamber, and a second solenoid to return the magnetic flux wi…
▽ More
The 4th Concept detector presently being designed for the International Linear Collider introduces several innovations in order to achieve the necessary experimental goal of a detecter that is 2-to-10 times better than the already excellent SLC and LEP detectors. We introduce a dual-readout calorimeter system, a cluster counting drift chamber, and a second solenoid to return the magnetic flux without iron. We discuss particle identification, momentum and energy resolutions, and the machine-detector interface that together offer the possibility of a very high-performance detector for e^+e^-physics up to $\sqrt{s} = 1$ TeV.
△ Less
Submitted 6 August, 2007; v1 submitted 31 July, 2007;
originally announced August 2007.
-
Search for a Standard Model Higgs Boson in CMS via Vector Boson Fusion in the H->WW->lνlνChannel
Authors:
E. Yazgan,
J. Damgov,
N. Akchurin,
V. Genchev,
D. Green,
S. Kunori,
M. Schmitt,
W. Wu,
M. T. Zeyrek
Abstract:
We present the potential for discovering the Standard Model Higgs boson produced by the vector-boson fusion mechanism. We considered the decay of Higgs bosons into the W+W- final state, with both W-bosons subsequently decaying leptonically. The main background is ttbar with one or more jets produced. This study is based on a full simulation of the CMS detector, and up-to-date reconstruction code…
▽ More
We present the potential for discovering the Standard Model Higgs boson produced by the vector-boson fusion mechanism. We considered the decay of Higgs bosons into the W+W- final state, with both W-bosons subsequently decaying leptonically. The main background is ttbar with one or more jets produced. This study is based on a full simulation of the CMS detector, and up-to-date reconstruction codes. The result is that a signal of 5 sigma significance can be obtained with an integrated luminosity of 12-72 1/fb for Higgs boson masses between 130-200 GeV. In addition, the major background can be measured directly to 7% from the data with an integrated luminosity of 30 1/fb. In this study, we also suggested a method to obtain information in Higgs mass using the transverse mass distributions.
△ Less
Submitted 13 June, 2007;
originally announced June 2007.
-
Studies of the Response of the Prototype CMS Hadron Calorimeter, Including Magnetic Field Effects, to Pion, Electron, and Muon Beams
Authors:
V. V. Abramov,
B. S. Acharya,
N. Akchurin,
I. Atanasov,
G. Baiatian,
A. Ball,
S. Banerjee,
P. de Barbaro,
V. Barnes,
G. Bencze,
A. Bodek,
M. Booke,
H. Budd,
L. Cremaldi,
P. Cushman,
S. R. Dugad,
L. Dimitrov,
A. Dyshkant,
J. Elias,
V. N. Evdokimov,
D. Fong,
J. Freeman,
V. Genchev,
P. I. Goncharov,
D. Green
, et al. (10 additional authors not shown)
Abstract:
We report on the response of a prototype CMS hadron calorimeter module to charged particle beams of pions, muons, and electrons with momenta up to 375 GeV/c. The data were taken at the H2 and H4 beamlines at CERN in 1995 and 1996. The prototype sampling calorimeter used copper absorber plates and scintillator tiles with wavelength shifting fibers for readout. The effects of a magnetic field of u…
▽ More
We report on the response of a prototype CMS hadron calorimeter module to charged particle beams of pions, muons, and electrons with momenta up to 375 GeV/c. The data were taken at the H2 and H4 beamlines at CERN in 1995 and 1996. The prototype sampling calorimeter used copper absorber plates and scintillator tiles with wavelength shifting fibers for readout. The effects of a magnetic field of up to 3 Tesla on the response of the calorimeter to muons, electrons, and pions are presented, and the effects of an upstream lead tungstate crystal electromagnetic calorimeter on the linearity and energy resolution of the combined calorimetric system to hadrons are evaluated. The results are compared with Monte Carlo simulations and are used to optimize the choice of total absorber depth, sampling frequency, and longitudinal readout segmentation.
△ Less
Submitted 21 July, 2000;
originally announced July 2000.