1.
|
Requirements for qualification of manufacture of the ITER Central Solenoid and Correction Coils
/ Libeyre, Paul (ITER, St. Paul Lez Durance) ; Li, Hongwei (ITER China, Beijing) ; Reiersen, Wayne (US ITER Project, Oak Ridge) ; Dolgetta, Nello (ITER, St. Paul Lez Durance) ; Jong, Cornelis (ITER, St. Paul Lez Durance) ; Lyraud, Charles (ITER, St. Paul Lez Durance) ; Mitchell, Neil (ITER, St. Paul Lez Durance) ; Laurenti, Adamo (ITER, St. Paul Lez Durance) ; Sgobba, Stefano (CERN) ; Turck, Bernard (ITER, St. Paul Lez Durance) et al.
2015
- Published in : Fusion Eng. Design 98-99 (2015) 1103-1108
In : 28th Symposium on Fusion Technology, San Sebastian, Spain, 29 Sep - 3 Oct 2014, pp.1103–1108
|
|
2.
|
From manufacture to assembly of the ITER central solenoid
/ Libeyre, P (BIAM, St Paul lez Durance) ; Schild, T (BIAM, St Paul lez Durance) ; Bruton, A (BIAM, St Paul lez Durance) ; Cormany, C (BIAM, St Paul lez Durance) ; Dolgetta, N (BIAM, St Paul lez Durance) ; Gaxiola, E (BIAM, St Paul lez Durance) ; Jong, C (BIAM, St Paul lez Durance) ; Mitchell, N (BIAM, St Paul lez Durance) ; Evans, D (BIAM, St Paul lez Durance) ; Levesy, B (BIAM, St Paul lez Durance) et al.
The Central Solenoid (CS), a key component of the ITER Magnet system, using a 45 kA Nb 3 Sn conductor, includes six identical coils, called modules, to form a solenoid, enclosed inside a structure providing vertical pre-compression and mechanical support. Procurement of the components of the ITER CS is the responsibility of US ITER, the US Domestic Agency (USDA), while the assembly of these components will be carried out by the ITER Organization (IO). [...]
2019 - 4 p.
- Published in : Fusion Eng. Des. 146 (2019) 437-440
|
|
3.
|
Manufacture of the ITER Central Solenoid Components
/ Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Cormany, Carl (Euratom, St. Paul Lez Durance) ; Dolgetta, Nello (Euratom, St. Paul Lez Durance) ; Gaxiola, Enrique (Euratom, St. Paul Lez Durance) ; Jong, Cornelis (Euratom, St. Paul Lez Durance) ; Lyraud, Charles (Euratom, St. Paul Lez Durance) ; Mitchell, Neil (Euratom, St. Paul Lez Durance) ; Journeaux, Jean-Yves (Euratom, St. Paul Lez Durance) ; Pearce, Robert (Euratom, St. Paul Lez Durance) ; Evans, David (Euratom, St. Paul Lez Durance) et al.
The ITER central solenoid (CS) components are currently being manufactured. This Nb$_{3}$Sn superconducting magnet will provide the magnetic flux swing required to induce up to 15 MA as plasma current. [...]
2018
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4200805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4200805
|
|
4.
|
Starting Manufacture of the ITER Central Solenoid
/ Libeyre, P (ITER, France) ; Cormany, C (ITER, France) ; Dolgetta, N (ITER, France) ; Gaxiola, E (ITER, France) ; Jong, C (ITER, France) ; Lyraud, C (ITER, France) ; Mitchell, N (ITER, France) ; Journeaux, J Y (ITER, France) ; Vollmann, T (ITER, France) ; Evans, D (ITER, France) et al.
The central solenoid (CS) is a key component of the ITER magnet system to provide the magnetic flux swing required to drive induced plasma current up to 15 MA. The manufacture of its different subcomponents has now started, following completion of the design analyses and achievement of the qualification of the manufacturing procedures. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4203305
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4203305
|
|
5.
|
The Laser Welding with Hot Wire of 316LN Thick Plate Applied on ITER Correction Coil Case
/ Fang, Chao (ASIPP, Anhui) ; Song, Yuntao (ASIPP, Anhui) ; Wu, Weiyue (ASIPP, Anhui) ; Wei, Jing (ASIPP, Anhui) ; Zhang, Shuquan (ASIPP, Anhui) ; Li, Hongwei (ITER China, Beijing) ; Dolgetta, N (ITER, St. Paul Lez Durance) ; Libeyre, P (ITER, St. Paul Lez Durance) ; Cormany, C (ITER, St. Paul Lez Durance) ; Sgobba, S (CERN)
ITER correction coil (CC) cases have characteristics of small cross section, large dimensions, and complex structure. The cases are made of heavy thick (20 mm), high strength and high toughness austenitic stainless steel 316LN. [...]
2014
- Published in : J. Fusion Energy 33 (2014) 752-758
|
|
6.
|
Electrical insulation testing for ITER fusion tokamak
/ Gaxiola, E (Euratom, St. Paul Lez Durance) ; Evans, D (Euratom, St. Paul Lez Durance) ; Laquiere, J (Euratom, St. Paul Lez Durance) ; Laurenti, A (Euratom, St. Paul Lez Durance) ; Libeyre, P (Euratom, St. Paul Lez Durance) ; Lyraud, C (Euratom, St. Paul Lez Durance) ; Piccin, R (Euratom, St. Paul Lez Durance) ; Rinaudo, G (Euratom, St. Paul Lez Durance) ; Simon, F (Euratom, St. Paul Lez Durance) ; Vollmann, T (Euratom, St. Paul Lez Durance) et al.
The uniqueness of the ITER fusion project drives purpose and scope here to fulfil (functional) Procurement Arrangement (PA) requirements for the Central Solenoid (CS) and Correction Coil (CC) magnets' electrical insulation [1-3]; as used and undertaken for covering high voltage testing operations of the magnet coil winding pack (WP) vacuum pressure insulation (VPI) beam qualification, followed in 2016 by start of magnets series production in the USA and China [1, 2]. Useful to be considered common state-of-the-art electrical power components testing practices [3, 4] are presented here as performed to verify that the integrity and insulation of the various components are within acceptable limits during different phases of the fabrication and to certify acceptance on delivery of the complete coils. [...]
2017 - 4 p.
- Published in : 10.1109/EIC.2017.8004670
In : 35th IEEE Electrical Insulation Conference, Baltimore, MD, USA, 11 - 14 Jun 2017, pp.408-411
|
|
7.
|
Examination and Characterization of Physical and Mechanical Properties of the ITER Central Solenoid Module Coils
/ Sgobba, Stefano (CERN) ; Aviles Santillana, Ignacio (CERN) ; Lourenço, Sandra Sophie (CERN) ; Guinchard, Michael (CERN) ; De Frutos, Oscar Sacristan (CERN) ; Jong, Cornelis (Euratom, St. Paul Lez Durance) ; Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Schild, Thierry (Euratom, St. Paul Lez Durance) ; Gaxiola, Enrique (Euratom, St. Paul Lez Durance) ; Bennet, José (CEA, DEN, Saclay) et al.
The ITER Central Solenoid (CS) consists of a stack of six independent coil packs called modules. It features a total height of 18 m and a diameter of over 4 m. [...]
2022 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4200605
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4200605
|
|
8.
|
World-Wide Benchmarking of ITER Nb$_{3}$Sn Strand Test Facilities
/ Jewell, MC (ITER Org Fus Energy, F-13607 St Paul Les Durance, France.) ; Oberli, Luc-Rene (CERN) ; Takahashi, Yoshikazu (Japan Atom Energy Agcy, Naka, Ibaraki 3110193, Japan.) ; Shikov, Alexander (Bochvar Res Inst Inorgan Mat JSC VNIIAN, Moscow 123098, Russia.) ; Devred, Arnaud (ITER Org Fus Energy, F-13607 St Paul Les Durance, France.) ; Vostner, Alexander (Fus Energy F4E, Barcelona 08019, Spain.) ; Liu, Fang (Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei 230031, Peoples R China.) ; Wu, Yu (Chinese Acad Sci ASIPP, Inst Plasma Phys, Hefei 230031, Peoples R China.) ; Jewell, Matthew C (ITER Org Fus Energy, F-13607 St Paul Les Durance, France.) ; Boutboul, Thierry (CERN) et al.
The world-wide procurement of Nb$_{3}$Sn and NbTi for the ITER superconducting magnet systems will involve eight to ten strand suppliers from six Domestic Agencies (DAs) on three continents. To ensure accurate and consistent measurement of the physical and superconducting properties of the composite strand, a strand test facility benchmarking effort was initiated in August 2008. [...]
2010
- Published in : IEEE Trans. Appl. Supercond. 20 (2010) 1500-1503
IEEE Published version, local copy: PDF;
In : 21st International Conference on Magnet Technology, Hefei, China, 18 - 23 Oct 2009, pp.1500-1503
|
|
9.
|
Qualification of the Manufacturing Procedures of the ITER Correction Coils
/ Libeyre, P (Euratom, St. Paul Lez Durance) ; Cormany, C (Euratom, St. Paul Lez Durance) ; Dolgetta, N (Euratom, St. Paul Lez Durance) ; Gaxiola, E (Euratom, St. Paul Lez Durance) ; Ilyin, Y (Euratom, St. Paul Lez Durance) ; Mitchell, N (Euratom, St. Paul Lez Durance) ; Simon, F (Euratom, St. Paul Lez Durance) ; Evans, D (Euratom, St. Paul Lez Durance) ; Sgobba, S (CERN) ; Langeslag, S A E (CERN) et al.
The system of correction coils (CC) is a component of the ITER magnet system, required to correct toroidal asymmetries and reduce error magnetic fields detrimental for physical processes in the plasma. It includes 18 coils, inserted in between toroidal field coils and poloidal field coils and split into 3 sets of 6 coils each: bottom correction coils (BCC), side correction coils (SCC), and top correction coils (TCC). [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4201405
|
|
10.
|
Examination of ITER Central Solenoid prototype joints
/ Aviles Santillana, I (CERN) ; Sgobba, S (CERN) ; Castillo Rivero, S (CERN) ; Fernandez Pison, P (CERN) ; Libeyre, P (BIAM, St Paul lez Durance) ; Everitt, D (Oak Ridge, U.S. ITER) ; Martovetsky, N (Oak Ridge, U.S. ITER)
The ITER Magnet System will be the largest and most challenging integrated superconducting magnet systemever built. For the Central Solenoid (CS), cable–in–conduit - conductors (CICCs) of nearly one kilometre lengthare produced, but still, it will be necessary to connect several lengths together to wind the gigantic 110 tonnescoils. [...]
2019 - 5 p.
- Published in : Fusion Eng. Des. 146 (2019) 157-161
|
|