CERN Accelerating science

CERN Document Server 5 records found  Search took 0.59 seconds. 
1.
Secondary Phases Quantification and Fracture Toughness at Cryogenic Temperature of Austenitic Stainless Steel Welds for High-Field Superconducting Magnets / Santillana, Ignacio Aviles (CERN) ; Pison, Pilar Fernandez (CERN) ; Langeslag, Stefanie Agnes Elisabeth (CERN) ; Sgobba, Stefano (CERN) ; Lunt, Alexander (CERN) ; Boyer, Christelle (Euratom, St. Paul Lez Durance) ; Navas, Elisa Maria Ruiz (Carlos III U., Madrid)
The ITER magnet system is based on the “cable-in-conduit” conductor concept, which consists of various types of stainless steel jackets filled with superconducting strands. The jackets provide high strength and fracture toughness to counteract the high stress imposed by, amongst others, electromagnetic loads at cryogenic temperature. [...]
2018 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4205804
In : 13th European Conference on Applied Superconductivity, ICCG, Geneva, Switzerland, 17 - 21 Sep 2017, pp.4205804
2.
Qualification of structural stainless steel products for the ITER correction coil cases / Sgobba, Stefano (CERN) ; Dalin, Jean-Michel (CERN) ; Langeslag, Stefanie Agnes Elisabeth (CERN) ; Aviles Santillana, Ignacio (CERN ; Carlos III U., Madrid) ; Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Simon, Fabrice (Euratom, St. Paul Lez Durance) ; Wei, Jing (Hefei, Inst. Plasma Phys.) ; Chai, Zhiyong (Taiyuan Iron & Steel (group) Co., Ltd. (TISCO), Taiyuan) ; Li, Laifeng (Beijing, Tech. Inst. Phys. Chem.)
The ITER Correction Coils (CCs) consist of three sets of six coils, Bottom (BCC), Side (SCC) and Top Correction Coils (TCC), respectively. The CCs rely on 10 kA NbTi cable-in-conduit conductor. [...]
2017 - 5 p. - Published in : Fusion Eng. Des. 124 (2017) 980-984
3.
Investigation of Materials and Welds for the Precompression Structure of the ITER Central Solenoid / Sgobba, Stefano (CERN) ; Santillana, Ignacio Aviles (Carlos III U., Madrid ; CERN) ; Langeslag, Stefanie Agnes Elisabeth (CERN) ; Pison, Pilar Fernandez (Carlos III U., Madrid ; CERN) ; Menendez, Paula Freijedo (CERN) ; Izquierdo, Gonzalo Arnau (CERN) ; Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Hughes, Duke (ORNL, Oak Ridge (main))
The Central Solenoid (CS) is the backbone of the ITER magnet system. It consists of six independent coils held together by a vertical pre-compression structure that must react tensile loads and provide sufficient preload to maintain coil-to-coil contact during all stages of plasma operation. [...]
2018 - 1 p. - Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4202504
4.
Physical Properties of a High-Strength Austenitic Stainless Steel for the Precompression Structure of the ITER Central Solenoid / Sgobba, Stefano (CERN) ; Langeslag, Stefanie Agnes Elisabeth (CERN) ; Arauzo, Ana (Zaragoza U.) ; Roussel, Pascal (U. Grenoble Alpes) ; Libeyre, Paul (ITER, France)
The ITER central solenoid (CS) consists of six independent coils kept together by a precompression support structure that must react vertical tensile loads and provide sufficient preload to maintain coil-to-coil contact when the solenoid is energized. The CS precompression system includes tie plates, lower and upper key blocks, load distribution and isolation plates and other attachment, support and insulating hardware. [...]
2016 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 26 (2016) 7000104
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.7000104
5.
Advanced examination techniques applied to the qualification of critical welds for the ITER correction coils / Sgobba, Stefano (CERN) ; Langeslag, Stefanie Agnes Elisabeth (CERN) ; Libeyre, Paul (ITER, St. Paul Lez Durance) ; Marcinek, Dawid Jaroslaw (Cracow Tech. U.) ; Piguiet, Aline (CERN) ; Cécillon, Alexandre (RX Solutions, Chavanod)
The ITER correction coils (CCs) consist of three sets of six coils located in between the toroidal (TF) and poloidal field (PF) magnets. The CCs rely on a Cable-in-Conduit Conductor (CICC), whose supercritical cooling at 4.5 K is provided by helium inlets and outlets. [...]
2015 - Published in : Fusion Eng. Design 98-99 (2015) 2072-2075
In : 28th Symposium on Fusion Technology, San Sebastian, Spain, 29 Sep - 3 Oct 2014, pp.2072–2075

Veja também: nomes de autores similares
5 Langeslag, S
1 Langeslag, S A E
8 Langeslag, S A E
2 Langeslag, S.A.E.
8 Langeslag, Stefanie
1 Langeslag, Stefanie A E
Interested in being notified about new results for this query?
Set up a personal email alert or subscribe to the RSS feed.
Haven't found what you were looking for? Try your search on other servers:
Langeslag, Stefanie Agnes Elisabeth em Amazon
Langeslag, Stefanie Agnes Elisabeth em CERN EDMS
Langeslag, Stefanie Agnes Elisabeth em CERN Intranet
Langeslag, Stefanie Agnes Elisabeth em CiteSeer
Langeslag, Stefanie Agnes Elisabeth em Google Books
Langeslag, Stefanie Agnes Elisabeth em Google Scholar
Langeslag, Stefanie Agnes Elisabeth em Google Web
Langeslag, Stefanie Agnes Elisabeth em IEC
Langeslag, Stefanie Agnes Elisabeth em IHS
Langeslag, Stefanie Agnes Elisabeth em INSPIRE
Langeslag, Stefanie Agnes Elisabeth em ISO
Langeslag, Stefanie Agnes Elisabeth em KISS Books/Journals
Langeslag, Stefanie Agnes Elisabeth em KISS Preprints
Langeslag, Stefanie Agnes Elisabeth em NEBIS
Langeslag, Stefanie Agnes Elisabeth em SLAC Library Catalog
Langeslag, Stefanie Agnes Elisabeth em Scirus