|
1.
|
Towards the Last Stages of the CERN’s AD-Target Area Consolidation Project and Recommissioning Plans to Resume Operation
/ Torregrosa, Claudio (CERN) ; Ahdida, Claudia (CERN) ; Bouvard, Aymeric (CERN) ; Broche, Alexandre (CERN) ; Burger, Stephane (CERN) ; Butcher, Mark (CERN) ; Calviani, Marco (CERN) ; Clerc, Vincent (CERN) ; De Macedo, Aurelio (CERN) ; De Man, Sven (CERN) et al.
Antiprotons are produced at CERN at the Antiproton Decelerator (AD) Target Area by impacting 26 GeV/c proton beams onto a fixed target. Further collection, momentum selection, and transport of the secondary particles - including antiprotons - towards the AD ring is realised by a 400 kA pulsed magnetic horn and a set of magnetic dipoles and quadrupoles. [...]
Geneva : JACoW, 2021 - 4 p.
- Published in : JACoW IPAC 2021 (2021) 3563-3566
Fulltext: PDF;
In : 12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.3563-3566
|
|
|
2.
|
Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype
/ Esposito, Raffaele (CERN ; Ecole Polytechnique, Lausanne) ; Aberle, Oliver (CERN) ; Calviani, Marco (CERN) ; Coiffet, Thibaut (CERN) ; Crouvizier, Mickaël (CERN) ; Franqueira Ximenes, Rui (CERN) ; Maire, Vincent (CERN) ; Pérez Fontenla, Ana Teresa (CERN) ; Timmins, Marc (CERN)
The new neutron spallation target for the CERN neutron Time-Of-Flight (n_TOF) facility is based on a nitrogen-cooled Pb core impacted by short high-intensity proton beam pulses. An extensive material characterization campaign has been carried out to define the constitutive behavior of lead and assess its response under pulsed proton beam irradiation. [...]
Geneva : JACoW, 2021 - 4 p.
- Published in : JACoW IPAC 2021 (2021) 3555-3558
Fulltext: PDF;
In : 12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.3555-3558
|
|
|
3.
|
|
|
4.
|
rf design studies on the 750 MHz radio frequency quadrupole linac for proton-induced x-ray emission analysis
/ Pommerenke, Hermann Winrich (CERN ; U. Rostock) ; Bencini, Vittorio (CERN) ; Grudiev, Alexej (CERN) ; Lombardi, Alessandra Maria (CERN) ; Mathot, Serge (CERN) ; Montesinos, Eric (CERN) ; Timmins, Marc (CERN) ; van Rienen, Ursula (U. Rostock) ; Vretenar, Maurizio (CERN)
The proton-induced x-ray emission (PIXE) is the most commonly used ion beam analysis technique. It allows for nondestructive quantitative elemental characterization and is used in a variety of fields, particularly for the diagnosis of cultural heritage artwork. [...]
2019 - 12 p.
- Published in : Phys. Rev. Accel. Beams 22 (2019) 052003
Fulltext from Publisher: PDF;
|
|
|
5.
|
Design, Prototyping Activities and Beam Irradiation Test for the New n_{TOF} Neutron Spallation Target
/ Esposito, Raffaele (CERN ; Ecole Polytechnique, Lausanne) ; Bergeret, Marc (CERN) ; Busom, Josep (CERN) ; Butcher, Mark (CERN) ; Calviani, Marco (CERN) ; Cimmino, Roberta (CERN) ; Coiffet, Thibaut (CERN) ; Espadanal, Joao (CERN) ; Gentini, Luca (CERN) ; Illan Fiastre, Ricardo (CERN) et al.
A third-generation neutron spallation target for the neutron time-of-flight facility at CERN (n_{TOF}) is currently undergoing the design and prototyping stage. The new design aims at improving reliability, increasing beam intensity on target and avoiding issues encountered in the current generation target, in particular the contamination of the cooling system water with radioactive spallation products coming from washing out lead. [...]
2018 - 4 p.
- Published in : 10.18429/JACoW-IPAC2018-WEPMF084
Fulltext: PDF;
In : 9th International Particle Accelerator Conference, Vancouver, Canada, 29 Apr - 4 May 2018, pp.WEPMF084
|
|
|
6.
|
RF Design of a High-frequency RFQ Linac for PIXE Analysis
/ Pommerenke, Hermann (CERN ; U. Rostock) ; Bilton, Amy (CERN) ; Grudiev, Alexej (CERN) ; Lombardi, Alessandra (CERN) ; Mathot, Serge (CERN) ; Montesinos, Eric (CERN) ; Timmins, Marc (CERN) ; Vretenar, Maurizio (CERN) ; van Rienen, Ursula (U. Rostock)
Protons with an energy of few MeV are commonly used for Ion Beam Analysis of materials, in particular with the Proton Induced X-ray Emission technique (PIXE). Because of its non-damaging character, PIXE is used in a variety of fields, in particular for the diagnosis of cultural heritage artwork. [...]
CERN-ACC-2018-193.-
2018 - 4 p.
- Published in : 10.18429/JACoW-LINAC2018-THPO058
Fulltext: PDF;
In : 29th International Linear Accelerator Conference, Beijing, China, 16 - 21 Sep 2018, pp.THPO058
|
|
|
7.
|
Prototyping Activities for a New Design of the CERN's Antiproton Production Target
/ Torregrosa, Claudio (CERN) ; Butcher, Mark (CERN) ; Calviani, Marco (CERN) ; Canhoto, J. (CERN) ; Ferriere, Romain (CERN) ; Gentini, Luca (CERN) ; Grenier-Boley, Edouard (CERN) ; Mircea Grec, Lucian (CERN) ; Perillo-Marcone, Antonio (CERN) ; Seidenbinder, Regis (CERN) et al.
Antiprotons are produced at CERN by impacting intense proton beams of 26 GeV/c onto a high-Z water-cooled target. The current design consists in an Ir core target in a graphite matrix and inserted in a Ti-6Al-4V assembly. [...]
2018 - 4 p.
- Published in : 10.18429/JACoW-IPAC2018-TUPAF038
Fulltext: PDF;
In : 9th International Particle Accelerator Conference, Vancouver, Canada, 29 Apr - 4 May 2018, pp.TUPAF038
|
|
|
8.
|
Fabrication and testing of a novel S-Band backward travelling wave accelerating structure for proton therapy linacs
/ Benedetti, Stefano (CERN ; Ecole Polytechnique, Lausanne) ; Argyropoulos, Theodoros (CERN) ; Blanch Gutiérrez, Cesar (CERN) ; Catalán Lasheras, Nuria (CERN) ; Degiovanni, Alberto (CERN) ; Esperante Pereira, Daniel (Valencia U., IFIC ; CERN) ; Garlaschè, Marco (CERN) ; Giner Navarro, Jorge (CERN) ; Grudiev, Alexej (CERN) ; McMonagle, Gerard (CERN) et al.
Compact and more affordable, facilities for proton therapy are now entering the market of commercial medical accelerators. At CERN, a joint collaboration between CLIC and TERA Foundation led to the design, fabrication and testing of a high gradient accelerating structure prototype, capable of halving the length of state-of-art light ion therapy linacs. [...]
CERN-ACC-2017-334; CLIC-Note-1136.-
2017 - 3 p.
- Published in : 10.18429/JACoW-LINAC2016-MOPLR048
Fulltext: moplr048 - PDF; moplr048_2 - PDF;
In : 28th Linear Accelerator Conference, East Lansing, Michigan, 25 - 30 Sep 2016, pp.MOPLR048
|
|
|
9.
|
|
|
10.
|
High-frequency compact RFQs for medical and industrial applications
/ Vretenar, Maurizio (CERN) ; Dimov, Veliko (CERN) ; Garlaschè, Marco (CERN) ; Grudiev, Alexej (CERN) ; Koubek, Benjamin (CERN) ; Lombardi, Alessandra (CERN) ; Mathot, Serge (CERN) ; Mazur, David (CERN) ; Montesinos, Eric (CERN) ; Timmins, Marc (CERN)
CERN has completed the construction of a 750 MHz RFQ reaching 5 MeV proton energy in a length of only 2 meters, to be used as injector for a compact proton therapy linac. Beyond proton therapy, this compact and lightweight design can be used for several applications, ranging from the production of radioisotopes in hospitals to ion beam analysis of industrial components or of artworks. [...]
CERN-ACC-2017-350.-
2017 - 6 p.
- Published in : 10.18429/JACoW-LINAC2016-TH1A06
Fulltext: PDF;
In : 28th Linear Accelerator Conference, East Lansing, Michigan, 25 - 30 Sep 2016, pp.TH1A06
|
|
alerte email personnalisée
ou inscrivez-vous via le 
flux RSS.