|
1.
|
Examination and Characterization of Physical and Mechanical Properties of the ITER Central Solenoid Module Coils
/ Sgobba, Stefano (CERN) ; Aviles Santillana, Ignacio (CERN) ; Lourenço, Sandra Sophie (CERN) ; Guinchard, Michael (CERN) ; De Frutos, Oscar Sacristan (CERN) ; Jong, Cornelis (Euratom, St. Paul Lez Durance) ; Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Schild, Thierry (Euratom, St. Paul Lez Durance) ; Gaxiola, Enrique (Euratom, St. Paul Lez Durance) ; Bennet, José (CEA, DEN, Saclay) et al.
The ITER Central Solenoid (CS) consists of a stack of six independent coil packs called modules. It features a total height of 18 m and a diameter of over 4 m. [...]
2022 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4200605
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4200605
|
|
|
2.
|
Assessment of Residual Stresses in ITER CS Helium Inlet Welds Fatigue Tested at Cryogenic Temperature
/ Sgobba, S (CERN) ; Aviles Santillana, I (CERN) ; Langeslag, S (CERN) ; Fernandez Pison, P (CERN ; Carlos III U., Madrid) ; Castillo Rivero, S (CERN ; Seville U.) ; Libeyre, P (Euratom, St. Paul Lez Durance) ; Jong, C (Euratom, St. Paul Lez Durance) ; Everitt, D (Oak Ridge, U.S. ITER) ; Freudenberg, K (Oak Ridge, U.S. ITER)
The ITER Central Solenoid (CS) consists of six independent wound modules. The
cooling of the cable-in-conduit conductor is assured by a forced flow of supercritical He at 4.5 K
supplied by He inlets located at the innermost radius of the coil. [...]
2019 - 6 p.
- Published in : IOP Conf. Ser. Mater. Sci. Eng. 502 (2019) 012095
In : 27th International Cryogenic Engineering Conference - International Cryogenic Materials Conference 2018, Oxford, United Kingdom, 3 - 7 Sep 2018, pp.012095
|
|
|
3.
|
From manufacture to assembly of the ITER central solenoid
/ Libeyre, P (BIAM, St Paul lez Durance) ; Schild, T (BIAM, St Paul lez Durance) ; Bruton, A (BIAM, St Paul lez Durance) ; Cormany, C (BIAM, St Paul lez Durance) ; Dolgetta, N (BIAM, St Paul lez Durance) ; Gaxiola, E (BIAM, St Paul lez Durance) ; Jong, C (BIAM, St Paul lez Durance) ; Mitchell, N (BIAM, St Paul lez Durance) ; Evans, D (BIAM, St Paul lez Durance) ; Levesy, B (BIAM, St Paul lez Durance) et al.
The Central Solenoid (CS), a key component of the ITER Magnet system, using a 45 kA Nb 3 Sn conductor, includes six identical coils, called modules, to form a solenoid, enclosed inside a structure providing vertical pre-compression and mechanical support. Procurement of the components of the ITER CS is the responsibility of US ITER, the US Domestic Agency (USDA), while the assembly of these components will be carried out by the ITER Organization (IO). [...]
2019 - 4 p.
- Published in : Fusion Eng. Des. 146 (2019) 437-440
|
|
|
4.
|
Post-mortem analysis of ITER CS helium inlets fatigue tested at cryogenic temperature
/ Aviles Santillana, I (CERN) ; Sgobba, S (CERN) ; Castillo Rivero, S (CERN) ; Libeyre, P (BIAM, St Paul lez Durance) ; Jong, C (BIAM, St Paul lez Durance) ; Everitt, D (Oak Ridge, U.S. ITER)
In the ITER Magnet System, ten thousand tonnes of superconducting Cable In Conduit Conductor (CICC) arecooled down by a forcedflow of supercritical helium, which is supplied from helium inlets. For the ITER CentralSolenoid (CS), consisting of six independent pancake wound modules, the He inlets consist of three overlappingholes covered by an oblong shaped boss, welded to the CS jacket through full penetration, multi-pass TungstenInert Gas (TIG) welding [...]
2019 - 5 p.
- Published in : Fusion Eng. Des. 146 (2019) 642-646
|
|
|
5.
|
Examination of ITER Central Solenoid prototype joints
/ Aviles Santillana, I (CERN) ; Sgobba, S (CERN) ; Castillo Rivero, S (CERN) ; Fernandez Pison, P (CERN) ; Libeyre, P (BIAM, St Paul lez Durance) ; Everitt, D (Oak Ridge, U.S. ITER) ; Martovetsky, N (Oak Ridge, U.S. ITER)
The ITER Magnet System will be the largest and most challenging integrated superconducting magnet systemever built. For the Central Solenoid (CS), cable–in–conduit - conductors (CICCs) of nearly one kilometre lengthare produced, but still, it will be necessary to connect several lengths together to wind the gigantic 110 tonnescoils. [...]
2019 - 5 p.
- Published in : Fusion Eng. Des. 146 (2019) 157-161
|
|
|
6.
|
Manufacture of the ITER Central Solenoid Components
/ Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Cormany, Carl (Euratom, St. Paul Lez Durance) ; Dolgetta, Nello (Euratom, St. Paul Lez Durance) ; Gaxiola, Enrique (Euratom, St. Paul Lez Durance) ; Jong, Cornelis (Euratom, St. Paul Lez Durance) ; Lyraud, Charles (Euratom, St. Paul Lez Durance) ; Mitchell, Neil (Euratom, St. Paul Lez Durance) ; Journeaux, Jean-Yves (Euratom, St. Paul Lez Durance) ; Pearce, Robert (Euratom, St. Paul Lez Durance) ; Evans, David (Euratom, St. Paul Lez Durance) et al.
The ITER central solenoid (CS) components are currently being manufactured. This Nb$_{3}$Sn superconducting magnet will provide the magnetic flux swing required to induce up to 15 MA as plasma current. [...]
2018
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4200805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4200805
|
|
|
7.
|
Starting Manufacture of the ITER Central Solenoid
/ Libeyre, P (ITER, France) ; Cormany, C (ITER, France) ; Dolgetta, N (ITER, France) ; Gaxiola, E (ITER, France) ; Jong, C (ITER, France) ; Lyraud, C (ITER, France) ; Mitchell, N (ITER, France) ; Journeaux, J Y (ITER, France) ; Vollmann, T (ITER, France) ; Evans, D (ITER, France) et al.
The central solenoid (CS) is a key component of the ITER magnet system to provide the magnetic flux swing required to drive induced plasma current up to 15 MA. The manufacture of its different subcomponents has now started, following completion of the design analyses and achievement of the qualification of the manufacturing procedures. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4203305
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4203305
|
|
|
8.
|
Requirements for qualification of manufacture of the ITER Central Solenoid and Correction Coils
/ Libeyre, Paul (ITER, St. Paul Lez Durance) ; Li, Hongwei (ITER China, Beijing) ; Reiersen, Wayne (US ITER Project, Oak Ridge) ; Dolgetta, Nello (ITER, St. Paul Lez Durance) ; Jong, Cornelis (ITER, St. Paul Lez Durance) ; Lyraud, Charles (ITER, St. Paul Lez Durance) ; Mitchell, Neil (ITER, St. Paul Lez Durance) ; Laurenti, Adamo (ITER, St. Paul Lez Durance) ; Sgobba, Stefano (CERN) ; Turck, Bernard (ITER, St. Paul Lez Durance) et al.
2015
- Published in : Fusion Eng. Design 98-99 (2015) 1103-1108
In : 28th Symposium on Fusion Technology, San Sebastian, Spain, 29 Sep - 3 Oct 2014, pp.1103–1108
|
|
|
9.
|
Status of the SNS Beam Power Upgrade Project
/ Henderson, Stuart (ORNL, Oak Ridge, Tennessee) ; Aleksandrov, Alexander V (ORNL, Oak Ridge, Tennessee) ; Anderson, David E (ORNL, Oak Ridge, Tennessee) ; Assadi, Saeed (ORNL, Oak Ridge, Tennessee) ; Campisi, Isidoro Enrico (ORNL, Oak Ridge, Tennessee) ; Casagrande, Fabio (ORNL, Oak Ridge, Tennessee) ; Champion, Mark (ORNL, Oak Ridge, Tennessee) ; Cutler, Roy I (ORNL, Oak Ridge, Tennessee) ; Danilov, Viatcheslav V (ORNL, Oak Ridge, Tennessee) ; Dodson, George W (ORNL, Oak Ridge, Tennessee) et al.
2006 - 3 p.
External link: Published version from JACoW
In : 10th European Particle Accelerator Conference, Edinburgh, UK, 26 - 30 Jun 2006, pp.345
|
|
alerte email personnalisée
ou inscrivez-vous via le 
flux RSS.