CERN Accélérateur de science

Accueil > Résultats de la recherche: Curé, Benoît
Conseils de recherche
Recherche avancée
Add to Search +
Recherche collections:
Trier par: Afficher: Format de sortie:
CERN Document Server 134 notices trouvées  1 - 10suivantfin  aller vers la notice: La recherche a duré 0.73 secondes. 
1.
Strategic R&D Programme on Technologies for Future Experiments - Annual Report 2024 / Aglieri Rinella, Gianluca
This report summarises the activities of the CERN/EP strategic R&D programme on technologies for future experiments during the year 2024..
CERN-EP-RDET-2025-004 -

Notice détaillée
2.
Analysis of Measurements of the Magnetic Flux Density in Steel Blocks of the Compact Muon Solenoid Magnet Yoke with Solenoid Coil Fast Discharges / Klyukhin, Vyacheslav (SINP, Moscow ; CERN ; Dubna, JINR) ; Curé, Benoit (CERN) ; Gaddi, Andrea (CERN) ; Kehrli, Antoine (CERN) ; Ostrega, Maciej (CERN) ; Pons, Xavier (CERN)
The Compact Muon Solenoid (CMS) detector at the Large Hadron Collider at CERN is used to study the production of new particles in proton-proton collisions at a center of mass energy of 13.6 TeV. The detector includes a magnet based on a 6 m diameter superconducting coil operating at a current of 18.164 kA. [...]
arXiv:2501.01357.- 2024-12-19 - 14 p. - Published in : Symmetry 16 (2024) 1689 Fulltext: 2501.01357 - PDF; document - PDF;
Notice détaillée
3.
Cryogenic thermosiphon used for indirect cooling of superconducting magnets / Głuchowska, Weronika (CERN ; Wroclaw Tech. U.) ; Banaszkiewicz, Tomasz (Wroclaw Tech. U.) ; Mentink, Matthias (CERN) ; Cure, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Singh, Shuvay (CERN)
A thermosiphon is a thermodynamic phenomenon that facilitates the circulation of cryogen within a cooling system, relying solely on gravitational forces and phase change. This mechanism leverages the variations in the density of the cryogenic fluid throughout the entire cooling loop, creating a pressure gradient. [...]
2024 - 10 p. - Published in : Cryogenics 143 (2024) 103951 Fulltext: PDF;
Notice détaillée
4.
HTS Detector Magnet Demonstrator Based on a 3D-Printed Partially-Insulated Support Cylinder / Eijnden, Joep L Van den (CERN ; Eindhoven, Tech. U.) ; Vaskuri, Anna K (CERN) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN)
In this work, we extend the experimental demonstration of partially-insulated, ultra-radiation transparent detector magnet technology based on a 3D-printed aluminium alloy support structure containing 10% of silicon. This demonstrator magnet has a bore diameter of 390 mm, effective wall thickness of 3.7 mm, and it has 15 turns corresponding to 19 meters of HTS conductor. [...]
2024 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4604804 Fulltext: PDF;
Notice détaillée
5.
Characteristics of Aluminium-Stabilized HTS Detector Magnet Cable at 4 K and 5 T / Vaskuri, Anna K (CERN) ; Van den Eijnden, Joep L (CERN ; Eindhoven, Tech. U.) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN)
A high-temperature superconducting (HTS) cable for future particle detector magnets has been developed using a 99.3% pure aluminium alloy as a stabilizer for the HTS. This HTS conductor features a stack of four ReBCO tapes (4 mm wide, SuperOx) soldered to a tin-coated copper-clad aluminium alloy cable profile using tin–lead solder at 188 °C. [...]
2024 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 34 (2024) 1-6 Fulltext: PDF;
Notice détaillée
6.
Towards Ultra-Thin Detector Magnet Designs by Insulating Coil Windings With V$_2$0$_3$-Epoxy Composite / Vaskuri, Anna (CERN) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN) ; Pfeiffer, Stephan (CERN) ; Teissandier, Benoit (CERN)
We have measured temperature dependent resistivity of two types of vanadium oxide (V 2 O 3 ) epoxy composites from 77 K to room temperature. Such a composite could be used as an insulating layer between the windings of a superconducting magnet. [...]
2023 - 4 p. - Published in : IEEE Trans. Appl. Supercond. 33 (2023) 1-4
Notice détaillée
7.
Annual Report 2023 and Phase-I Closeout / Aglieri Rinella, Gianluca
This report summarises the activities of the CERN strategic R&D programme on technologies for future experiments during the year 2023, and highlights the achievements of the programme during its first phase 2020-2023..
CERN-EP-RDET-2024-001 - 208.

Notice détaillée
8.
Fifteen Years of Operation of the Compact Muon Solenoid Detector Superconducting Magnet / Curé, Benoit (CERN) ; Le Godec, Gilles (CERN) ; Ostrega, Maciej (CERN) ; Wagner, Udo (CERN)
The Compact Muon Solenoid (CMS) detector magnet has been in operation since 2008 at CERN's Large Hadron Collider (LHC). It will have to operate until the end of the High-Luminosity LHC run, beyond 2040. [...]
2024 - 8 p. - Published in : IEEE Trans. Appl. Supercond. 34 (2024) 1-8 Fulltext: PDF;
Notice détaillée
9.
Self-protected high-temperature superconducting demonstrator magnet for particle detectors / Van den Eijnden, Joep L (CERN ; Eindhoven, Tech. U.) ; Vaskuri, Anna K (CERN) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Mentink, Matthias (CERN)
A high temperature superconducting (HTS) demonstration coil has been developed in the frame of the Experimental Physics department Research and Development program at CERN The magnet extends the recent experimental demonstration of aluminium-stabilised HTS conductors and supports the development of future large scale detector magnets. The HTS magnet has five turns and an open bore diameter of 230 mm. [...]
2023 - 14 p. - Published in : Supercond. Sci. Technol. 37 (2024) 015007 Fulltext: PDF;
Notice détaillée
10.
Comparison of Two Detector Magnetic Systems for the Future Circular Hadron-Hadron Collider / Klyukhin, Vyacheslav (SINP, Moscow ; CERN) ; Ball, Austin (CERN) ; Berriaud, Christophe Paul (IRFU, Saclay) ; Curé, Benoit (CERN) ; Dudarev, Alexey (CERN) ; Gaddi, Andrea (CERN) ; Gerwig, Hubert (CERN) ; Hervé, Alain (Wisconsin U., Madison) ; Mentink, Matthias (CERN) ; Riegler, Werner (CERN) et al.
The conceptual design study of a Future Circular hadron-hadron Collider (FCC-hh) to be con-structed at CERN with a center-of-mass energy of the order of 100 TeV requires superconducting magnetic systems with a central magnetic flux density of an order of 4 T for the experimental detectors. The developed concept of the FCC-hh detector involves the use of an iron-free magnetic system consisting of three superconducting solenoids. [...]
arXiv:2401.02835.- 2023-09-17 - 11 p. - Published in : Appl. Sciences 13 (2023) 10387 Fulltext: document - PDF; 2401.02835 - PDF;
Notice détaillée

CERN Document Server : 134 notices trouvées   1 - 10suivantfin  aller vers la notice:
Voir aussi: noms d'auteurs similaires
60 Cure, B
19 Cure, B.
137 Cure, Benoit
137 Curè, Benoit
60 Curé, B
19 Curé, B.
137 Curé, Benoit
Vous désirez être averti des nouveaux résultats pour cette recherche?
Abonnez-vous à une alerte email personnalisée ou inscrivez-vous via le flux RSS.
Vous n'avez pas trouvé ce que vous avez cherché? Essayez votre requête sur d'autres serveurs:
Curé, Benoît dans Amazon
Curé, Benoît dans CERN EDMS
Curé, Benoît dans CERN Intranet
Curé, Benoît dans CiteSeer
Curé, Benoît dans Google Books
Curé, Benoît dans Google Scholar
Curé, Benoît dans Google Web
Curé, Benoît dans IEC		Curé, Benoît dans IHS
Curé, Benoît dans INSPIRE
Curé, Benoît dans ISO
Curé, Benoît dans KISS Books/Journals
Curé, Benoît dans KISS Preprints
Curé, Benoît dans NEBIS
Curé, Benoît dans SLAC Library Catalog
Curé, Benoît dans Scirus