CERN Accelerating science

CERN Document Server 10 registres trobats  La cerca s'ha fet en 1.01 segons. 
1.
Manufacture and performance test result of a 95 kA-class Nb-Ti cable-in-conduit conductor for the low field winding-package of CFETR-TF coil / Dai, Chao (Hefei, Inst. Plasma Phys.) ; Wu, Yu (Hefei, Inst. Plasma Phys.) ; Sedlak, Kamil (LPHE, Lausanne) ; Bajas, Hugo (LPHE, Lausanne) ; Nijhuis, Arend (Twente U., Enschede) ; Bruzzone, Pierluigi (LPHE, Lausanne) ; Devred, Arnaud (CERN) ; Qin, Jinggang (Hefei, Inst. Plasma Phys.) ; Liu, Yunhao (Hefei, CUST) ; Xue, Tianjun (Showa Wire Cable, Kawasaki) et al.
The engineering design of the CFETR TF prototype coil and conductors has been completed. The wind-package (WP) of the coil is graded into three regions based on the magnetic field distribution for saving cost. [...]
2023 - 8 p. - Published in : Physica C 606 (2023) 1354212
2.
Application of Copper Thermal Spraying for Electrical Joints between Superconducting Nb33Sn Cables / D'Auria, Vincenzo (PSI, Villigen) ; Bruzzone, Pierluigi (PSI, Villigen) ; Meyer, Mickael Sebastian (CERN) ; Castro, Enrique Rodriguez (CERN ; Carlos III U., Madrid) ; Sgobba, Stefano (CERN)
This manuscript reports on the application of copper thermal spraying in the manufacturing process of an electrical connection between Nb3Sn cables for superconducting magnets of fusion reactors. The joint is realized through diffusion bonding of the sprayed coating of the two cables. [...]
2021 - 10 p. - Published in : Materials 15 (2021) 125 Fulltext: PDF;
3.
Superconductors for fusion: a roadmap / Mitchell, Neil (Euratom, St. Paul Lez Durance) ; Zheng, Jinxing (Hefei, Inst. Plasma Phys.) ; Vorpahl, Christian (EFDA-CSU, Garching) ; Corato, Valentina (ENEA, Frascati) ; Sanabria, Charlie (Unlisted, US) ; Segal, Michael (Unlisted, US) ; Sorbom, Brandon (Unlisted, US) ; Slade, Robert (Unlisted, GB) ; Brittles, Greg (Unlisted, GB) ; Bateman, Rod (Unlisted, GB) et al.
With the first tokamak designed for full nuclear operation now well into final assembly (ITER), and a major new research tokamak starting commissioning (JT60SA), nuclear fusion is becoming a mainstream potential energy source for the future. A critical part of the viability of magnetic confinement for fusion is superconductor technology. [...]
2021 - 57 p. - Published in : Supercond. Sci. Technol. 34 (2021) 103001
4.
Progress on the Upgrade of EDIPO, a 15 T Large Aperture Dipole / Araujo, Douglas Martins (CERN) ; Ballarino, Amalia (CERN) ; Bordini, Bernardo (CERN) ; Bottura, Luca (CERN) ; Hopkins, Simon C (CERN) ; Perez, Juan C (CERN) ; Ravaioli, Emmanuele (CERN) ; de Rijk, Gijs (CERN) ; Bruzzone, Pierluigi (Ecole Polytechnique, Lausanne) ; Sarasola, Xabier (Ecole Polytechnique, Lausanne) et al.
The upgraded magnet assembly of the EDIPO test facility aims at generating 15 T at 4.2 K and 85% of short sample limit in a large rectangular aperture and over a uniform field length of 1000 mm. During 2020 the design studies have concentrated on two flared-end block-coil design options with four double-pancake coils, two per pole. [...]
2021 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 31 (2021) 9500205
5.
Performance test and analysis of the first large-scale cable-in-conduit conductor with high JJcc Nb33Sn strand for fusion reactor / Dai, Chao (Hefei, Inst. Plasma Phys.) ; Wu, Yu (Hefei, Inst. Plasma Phys.) ; Li, Jiangang (Hefei, Inst. Plasma Phys.) ; Guo, Zichuan (USTC, Hefei) ; Qin, Jinggang (Hefei, Inst. Plasma Phys.) ; Long, Feng (Hefei, Inst. Plasma Phys.) ; Nijhuis, Arend (Twente U. Tech., Enschede) ; Bruzzone, Pierluigi (PSI, Villigen) ; Stepanov, Boris (PSI, Villigen) ; Shi, Yi (Hefei, Inst. Plasma Phys.) et al.
The Comprehensive Research Facility for Fusion Technology (CRAFT) project has been launched in 2019, for developing the essential engineering technologies for Chinese Fusion Engineering Testing Reactor (CFETR). Within this project, a full-size toroidal field (TF) coil will be built as the prototype coil for CFETR. [...]
2021 - 10 p. - Published in : Nucl. Fusion 61 (2021) 036044
6.
Magnetic and Mechanical 3-D Modelling of a 15 T Large Aperture Dipole Magnet / Araujo, Douglas Martins (CERN) ; Bottura, Luca (CERN) ; Bruzzone, Pierluigi (Ecole Polytechnique, Lausanne) ; Cau, Francesca (Fusion for Energy, Barcelona) ; Ferracin, Paolo (CERN) ; Pong, Ian (LBNL, Berkeley) ; Portone, Alfredo (Fusion for Energy, Barcelona) ; Prestemon, Soren (LBNL, Berkeley) ; Ravaioli, Emmanuele (CERN) ; Reccia, Luigi (Fusion for Energy, Barcelona) et al.
In 2018, two structures have been proposed with the goal of replacing the magnet EDIPO that stopped operating in 2016. These two solutions were designed to generate a field of 15 T on an aperture of 100 × 150 mm22 at 4.2 K by using Nb3Sn superconducting Rutherford cable. [...]
2020 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4000705
7.
The 16 T dipole development program for FCC and HE-LHC / Schoerling, Daniel (CERN) ; Arbelaez, Diego (LBNL, Berkeley) ; Auchmann, Bernhard (PSI, Villigen) ; Bajko, Marta (CERN) ; Ballarino, Amalia (CERN) ; Barzi, Emanuela (Fermilab) ; Bellomo, Giovanni (INFN, Milan) ; Benedikt, Michael (CERN) ; Izquierdo Bermudez, Susana (CERN) ; Bordini, Bernardo (CERN) et al.
A future circular collider (FCC) with a center-of-mass energy of 100 TeV and a circumference of around 100 km, or an energy upgrade of the LHC (HE-LHC) to 27 TeV require bending magnets providing 16 T in a 50-mm aperture. Several development programs for these magnets, based on Nb33Sn technology, are being pursued in Europe and in the U.S. [...]
FERMILAB-PUB-19-400-TD.- 2019 - 9 p. - Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4003109
8.
Magnetic and mechanical design of a 15-T large aperture dipole magnet for cable testing / Sarasola, Xabier (Ecole Polytechnique, Lausanne) ; Bruzzone, Pierluigi (Ecole Polytechnique, Lausanne) ; Bottura, Luca (CERN) ; Ferracin, Paolo (CERN) ; Araujo, Douglas Martins (CERN) ; de Rijk, Gijs (CERN) ; Cau, Francesca (Fusion for Energy, Barcelona) ; Portone, Alfredo (Fusion for Energy, Barcelona) ; Testoni, Pietro (Fusion for Energy, Barcelona) ; Prestemon, Soren (LBNL, Berkeley) et al.
A large aperture Nb33Sn dipole is proposed to replace the magnet assembly of EDIPO, which was irreversibly damaged in 2016. The goal is to generate a background field of 15 T at 4.2 K in a clear aperture of approximately 100×150 mm22 and over a uniform length of 1000 mm in order to test superconducting cables for both fusion and high-energy physics applications. [...]
2019 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4001405
9.
Conceptual Design of a Large Aperture Dipole for Testing of Cables and Insert Coils at High Field / Bruzzone, Pierluigi (CRPP, Lausanne) ; Bottura, Luca (CERN) ; Cau, Francesca (Fusion for Energy, Barcelona) ; de Rijk, Gijs (CERN) ; Ferracin, Paolo (CERN) ; Minervini, Joseph (MIT) ; Portone, Alfredo (Fusion for Energy, Barcelona) ; Prestemon, Soren (LBL, Berkeley) ; Rochepault, Etienne (CERN) ; Ravaioli, Emmanuele (LBL, Berkeley) et al.
Advances in the performance of low and high temperature superconductors enable the development of advanced magnets for a range of applications, including tokamaks for fusion energy, dipoles and quadrupoles for hadron colliders. The capability of testing prototype cables and insert coils at high field is critical to these developments. [...]
2017 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 28 (2017) 4005505
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4005505
10.
Computations of AC Loss in the ITER Magnets during Fast Field Transients / Bottura, Luca (CERN) ; Bruzzone, Pierluigi (EPFL-CRPP, Fusion Technology Division, Villigen PSI, Switzerland) ; Lister, Jonathan B (EPFL-CRPP, Lausanne, Switzerland) ; Marinucci, Claudio (EPFL-CRPP, Fusion Technology Division, Villigen PSI, Switzerland) ; Portone, Alfredo (EFDA-CSU, Garching, Germany)
The calculation of AC loss due to the control currents in ITER is a cumbersome task. The reason is that control transients require small field changes (0.1 T or less) at moderate frequency (up to 10 Hz), where effects of partial penetration of the filaments and shielding are important and need to be taken into account to produce sound AC loss estimates. [...]
CERN-AT-2007-013-MTM.- Geneva : CERN, 2007 - 6 p. - Published in : IEEE Trans. Appl. Supercond. 17 (2007) 2438-2441 Access to fulltext document: PDF; IEEE Published version, local copy: PDF;
In : Applied Superconductivity Conference, Seattle, WA, USA, 27 Aug - 1 Sep 2006, pp.2438-2441

Vegeu també: autors amb noms similars
11 Bruzzone, P
6 Bruzzone, P L
Us interessa rebre alertes sobre nous resultats d'aquesta cerca?
Definiu una alerta personal via correu electrònic o subscribiu-vos al canal RSS.
No heu trobat el que estaveu cercant? Proveu la vostra cerca a:
Bruzzone, Pierluigi dins Amazon
Bruzzone, Pierluigi dins CERN EDMS
Bruzzone, Pierluigi dins CERN Intranet
Bruzzone, Pierluigi dins CiteSeer
Bruzzone, Pierluigi dins Google Books
Bruzzone, Pierluigi dins Google Scholar
Bruzzone, Pierluigi dins Google Web
Bruzzone, Pierluigi dins IEC
Bruzzone, Pierluigi dins IHS
Bruzzone, Pierluigi dins INSPIRE
Bruzzone, Pierluigi dins ISO
Bruzzone, Pierluigi dins KISS Books/Journals
Bruzzone, Pierluigi dins KISS Preprints
Bruzzone, Pierluigi dins NEBIS
Bruzzone, Pierluigi dins SLAC Library Catalog
Bruzzone, Pierluigi dins Scirus