CERN Accelerating science

Article
Title	Installation of the LHC Long Straight Sections (LSS)
Author(s)	Bartolome-Jimenez, Sonia ; Trinquart, Gilbert
Affiliation	(CERN) ; (LSS)
Publication	2005
In:	21st IEEE Particle Accelerator Conference, Knoxville, TN, USA, 16 - 20 May 2005, pp.1563
Subject category	Accelerators and Storage Rings
Accelerator/Facility, Experiment	CERN LHC
Abstract	The LHC long straight sections (LSS) serve as experimental or utility insertions. There are two high luminosity experimental insertions located at points 1 and 5 and two more experimental insertions at points 2 and 8 which also contain the injection systems. The beams only cross at these four locations and are focused by superconducting low-beta triplets. Insertions 3 and 7 each contain two collimation systems. Insertion 4 contains two RF systems. Insertion 6 contains the beam dumping system. The installation of the LSS is a challenge due to the compact layout that characterises these areas and the difficulties related to the underground work mainly in zones of restricted access. Specific devices are required for handling and installing various heavy and voluminous elements. This paper reviews the installation scenarios, describes the sequences presently planned and highlights the potential problem areas. The particular case of sector 7-8 where the LSS elements will be installed in parallel with the cryogenic distribution line (QRL) is used as an example of a 'rapid' installation scheme to illustrate how resources are used. The consequences of possible shortcuts are also mentioned.
Copyright/License	publication: (License: CC-BY)