| Studies on a heat exchanger producing subcooled liquid helium (p. 225) |
| by Ohuchi, N |
| A superconducting bending magnet system for a compact synchrotron light source (p. 367) |
| by Green, M A |
| Cryogenic tests of the g-2 superconducting solenoid magnet system (p. 383) |
| by Jia, L X |
| A design method for multiple tube gas-cooled electrical leads for the g-2 superconducting magnets (p. 573) |
| by Green, M A |
| Refrigerated hydrogen gas jet for the Fermilab antiproton accumulator (p. 685) |
| by Allspach, D H |
| Performance of the supercritical helium cooling loop for the jet divertor cryopump (p. 751) |
| by Obert, W |
| Conclusions from procuring, installing and commissioning six large-scale helium refrigerators at CERN (p. 761) |
| by Barranco-Luque, M |
| The superfluid helium cryogenic system for the LHC test string : design construction and first operation(p. 777) |
| by Bézaguet, Alain-Arthur |
| Measurement and analysis of thermal performance of LHC prototype cryostats (p. 785) |
| by Benda, V |
| A composite vacuum barrier for the LHC short straight section (p. 793) |
| by Jenny, B |
| Experimental investigation of accidental loss of insulation vacuum in an LHC prototype dipole cryostat (p. 799) |
| by Lebrun, P |
| Cryogenic performance of a superfluid helium relief valve for the LHC superconducting magnets (p. 805) |
| by Danielsson, H |
| Measurement of the thermo hydraulic behaviour of LHC dipole prototypes after quench (p. 811) |
| by Gerin, G |
| Conceptual design of the CMS 4 tesla solenoid (p. 819) |
| by Lottin, J C |
| TESLA Test Facility alternate cryostat design (p. 839) |
| by Nicol, T H |
| Status of the TTF cryogenic system (p. 847) |
| by Grygiel, G |
| Design manufacture and test of the TESLA-TTF cavity cryostat (p. 855) |
| by Alessandria, F |
| Status report of the TTF capture cavity cryostat (p. 863) |
| by Bühler, S |
| Cryostat for testing rf power couplers (p. 869) |
| by Kuchnir, M |
| Design of power and HOM couplers for TESLA (p. 877) |
| by Koepke, K P |
| Various methods of manufacturing superconducting accelerating cavities (p. 885) |
| by Benvenuti, Cristoforo |
| A novel rotating temperature and radiation mapping system in superfluid He and its successful diagnostics (p. 895) |
| by Shu, Q S |
| Cryogenic and electrical test cryostat for instrumented superconductive rf cavities (chechia) (p. 905) |
| by Clay, P |
| The TESLA 500 cryogenic system layout (p. 911) |
| by Horlitz, G |
| Safe and efficient operation of multistage cold compressor systems (p. 921) |
| by Kauschke, M |
| Cooling characteristics of a modified miniature pulse tube refrigerator (p. 1427) |
| by Haruyama, T |
| Industrial-type cryogenic thermometer with built-in heat interception (p. 1715) |
| by Balle, C |
| Irradiation of quench protection diodes at cryogenic temperatures in a nuclear research reactor (p. 1963) |
| by Hagedorn, Dietrich |
| Results of thermal hydraulic measurements on two 15 ka ITER style cable in conduit conductors (no pagination) |
| by Rousset, B |
| A way to increase the critical current in the stainless steel jacketed Nb$_{3}$Sn conductor for fusion (no pagination) |
| by Decool, P |
| Test faility for joints of subsize cable-in-conduit conductors for NET/ITER winding studies (no pagination) |
| by Jäger, B |
| Coupling losses of fusion conduction: influence of some design parameters (no pagination) |
| by Duchateau, J L |
| Coupling loss time constants in full-size Nb$_{3}$Sn CIC model conductors for fusion magnets (no pagination) |
| by Nijhuis, A |
| Contact surfaces between strands of Rutherford cables in various curing conditions |
| by Kimura, A |
| Initial performance of upgraded Tevatron cryogenic systems |
| by Norris, B L |
| Radiation tests at cryogenic temperature on selected organic materials for LHC |
| by Hümmer, K |
| Cryogenic testing and analysis associated with tevatron lower temperature opera tion |
| by Theilacker, J C |
| Operation and maintenance of Fermilab's 300 kW helium screw compressors after two million hours of operation |
| by Martínez, A |
| Electrical safety of a thin superconducting solenoid in an iron yoke |
| by Smith, R P |
| Operation and maintenance of Fermilab's satellite refrigerator expansion engines |
| by Soyars, W M |
| Portable neon purification system |
| by Richardson, R A |