CERN Accelerating science

Article
Title	Finite Element Analysis and Experimental Validation of Low-Pressure Beam Windows for XCET Detectors at CERN
Related title	FINITE ELEMENT ANALYIS AND EXPERIMENTAL VALIDATION OF LOW-PRESSURE BEAM WINDOWS FOR XCET DETECTORS AT CERN
Author(s)	Buesa Orgaz, Jan (CERN) ; Brugger, Markus (CERN) ; Romagnoli, Giulia (CERN) ; Sacristan De Frutos, Oscar (CERN) ; Sanchez Galan, Francisco (CERN)
Publication	Geneva : JACoW, 2021
Number of pages	4
In:	JACoW IPAC 2021 (2021) 2487-2490
In:	12th International Particle Accelerator Conference (IPAC 2021), Online, 24 - 28 May 2021, pp.2487-2490
DOI	10.18429/JACoW-IPAC2021-TUPAB410 (publication)
Subject category	Accelerators and Storage Rings
Abstract	In the framework of the renovation and consolidation of experimental areas at CERN, a low-pressure design beam superimposed windows (250 µm Mylar and 150 µm polyethylene) for the Threshold Cherenkov counters (XCET) has been modelled and verified for its implementation. The XCET is a detector used to count the number of selected charged particles in the beam by adjusting the pressure that leads to the emission of Cherenkov photons only above certain pressure threshold. Simultaneously, the charged particles pass from a vacuum environment to the pressurized refractive gas vessel through a solid interface. Minimal material in this solid interface is therefore crucial to avoid interactions of the low-energy particles which may lead to beam intensity loss or background production. Hence, thin and low-density materials are required to mitigate multiple scattering and energy loss of the incoming particles while still allowing the needed pressures inside the counter vessel. A XCET validation methodology was conducted using Finite Element Analysis (FEA), followed by experimental validations performing burst pressure tests and using Digital Image Correlation (DIC).
Copyright/License	publication: © 2021 (License: CC-BY-3.0)

Corresponding record in: Inspire