| Published Articles | |
| Report number | FERMILAB-PUB-08-459-TD |
| Title | Development and Coil Fabrication for the LARP 3.7-m Long Nb3Sn Quadrupole |
| Author(s) |
Ambrosio, Giorgio (Fermilab) ; Andreev, Nikolai (Fermilab) ; Anerella, Michael (BNL, Upton) ; Barzi, Emanuela (Fermilab) ; Bossert, Rodger (Fermilab) ; Caspi, Shlomo (LBNL, Berkeley) ; Chlachidize, Guram (Fermilab) ; Dietderich, Daniel R (LBNL, Berkeley) ; Felice, Helene (LBNL, Berkeley) ; Ferracin, Paolo (LBNL, Berkeley) ; Ghosh, Arup (BNL, Upton) ; Hafalia, R (LBNL, Berkeley) ; Hannaford, R (LBNL, Berkeley) ; Jochen, G (BNL, Upton) ; Kashikhin, V V (Fermilab) ; Kovach, P (BNL, Upton) ; Lamm, Michael (Fermilab) ; Lietzke, A (LBNL, Berkeley) ; McInturff, Al D (LBNL, Berkeley ; Texas A&M U., College Station) ; Nobrega, F (Fermilab) ; Novitsky, I (Fermilab) ; Peggs, S (BNL, Upton) ; Muratore, Joseph F (BNL, Upton) ; Prestemon, Soren (LBNL, Berkeley) ; Sabbi, GianLuca (LBNL, Berkeley) ; Schmalzle, Jesse (BNL, Upton) ; Turrioni, Daniele (Fermilab) ; Whitson, G (Fermilab) ; Wanderer, Peter (BNL, Upton) ; Zlobin, Alexander V (Fermilab) |
| Publication | 2009 |
| Imprint | 2009-02 |
| Number of pages | 4 |
| In: | IEEE Trans. Appl. Supercond. 19 (2009) 1231-1234 |
| In: | Applied Superconductivity Conference 2008, Chicago, IL, USA, 17 - 22 Aug 2008, pp.1231-1234 |
| DOI | 10.1109/TASC.2009.2019601 |
| Subject category | Accelerators and Storage Rings |
| Accelerator/Facility, Experiment | LARP CERN LHC |
| Project | CERN HL-LHC |
| Abstract | The U.S. LHC Accelerator Research Program (LARP) has started the fabrication of 3.7-m long Nb$_3$Sn quadrupole models. The Long Quadrupoles (LQ) are ldquoProof-of-Principlerdquo magnets which are to demonstrate that Nb$_3$Sn technology is mature for use in high energy particle accelerators. Their design is based on the LARP Technological Quadrupole (TQ) models, developed at FNAL and LBNL, which have design gradients higher than 200 T/m and an aperture of 90 mm. The plans for the LQ R&D; and a design update are presented and discussed in this paper. The challenges of fabricating long accelerator-quality Nb$_3$Sn coils are presented together with the solutions adopted for the LQ coils (based on the TQ experience). During the fabrication and inspection of practice coils some problems were found and corrected. The fabrication at BNL and FNAL of the set of coils for the first Long Quadrupole is in progress. |
| Copyright/License | © 2009-2025 IEEE |
Corresponding record in: Inspire
Zapis kreiran 2021-06-24, zadnja izmjena 2021-06-24
PDF