CERN Accelerating science

Published Articles
Report number	CERN-ACC-2015-268
Title	New Method for Validation of Aperture Margins in the LHC Triplet
Author(s)	Chetvertkova, Vera (CERN) ; Schmidt, Ruediger (CERN) ; Velotti, Francesco (CERN ; EPFL-ISIC, Lausanne) ; Wollmann, Daniel (CERN)
Publication	2015
Number of pages	3
In:	6th International Particle Accelerator Conference, Richmond, VA, USA, 3 - 8 May 2015, pp.TUPTY052
Subject category	Accelerators and Storage Rings
Abstract	Safety of LHC equipment including superconducting magnets depends not only on the proper functioning of the systems for machine protection, but also on the accurate adjustment of the protective devices such as collimators. In case of a failure of the extraction kicker magnets, which are part of the beam dumping system, it is important to ensure protection of the superconducting triplet magnets from missteered beam. The magnets are located to the right of Interaction Point 5 (IP5) and are protected by one set of collimators in the beam dumping insertion in IR6 and another set close to the triplet magnets. In this paper, a new method for verification of the correct collimator position with respect to the aperture is presented. It comprises the application of an extended orbit bump with identical trajectory as the beam trajectory after a deflection by the beam dump kickers. By further increasing the bump amplitude and successively moving in/out the collimators in the region of interest, the accurate positioning of the collimators can be validated. The effectiveness of the method for LHC IP5 and IP1 and both beams is discussed
Copyright/License	publication: © 2015-2025 The Author(s) (License: CC-BY-3.0)

Corresponding record in: Inspire