Modeling heat transfer from quench protection heaters to superconducting cables in Nb$_{3}$Sn magnets

Salmi, T.; Caspi, S.; Felice, H.; Arbelaez, D.; Prestemon, S.; ten Kate, H. H. J.; Chlachidze, G.

doi:10.5170/CERN-2013-006.30

Article
Report number	arXiv:1401.3939 ; FERMILAB-CONF-13-594-TD
Title	Modeling heat transfer from quench protection heaters to superconducting cables in Nb$_{3}$Sn magnets
Author(s)	Salmi, T. (LBNL, Berkeley) ; Arbelaez, D. (LBNL, Berkeley) ; Caspi, S. (LBNL, Berkeley) ; Felice, H. (LBNL, Berkeley) ; Prestemon, S. (LBNL, Berkeley) ; Chlachidze, G. (Fermilab) ; ten Kate, H. H. J. (Twente U., Enschede)
Publication	2013
Imprint	16 Jan 2014
Number of pages	8
Note	Comments: 8 pages, Contribution to WAMSDO 2013: Workshop on Accelerator Magnet, Superconductor, Design and Optimization; 15 - 16 Jan 2013, CERN, Geneva, Switzerland 8 pages, Contribution to WAMSDO 2013: Workshop on Accelerator Magnet, Superconductor, Design and Optimization; 15 - 16 Jan 2013, CERN, Geneva, Switzerland
In:	WAMSDO: Workshop on Accelerator Magnet Superconductors, Design and Optimization, pp.30-37
DOI	10.5170/CERN-2013-006.30
Subject category	Accelerators and Storage Rings
Abstract	We use a recently developed quench protection heater modeling tool for an analysis of heater delays in superconducting high-field Nb$_{3}$Sn accelerator magnets. The results suggest that the calculated delays are consistent with experimental data, and show how the heater delay depends on the main heater design parameters.
Copyright/License	publication: © 2013-2025 CERN (License: CC-BY-3.0)