Advances in the Design of Proton Linear Accelerators - Meson Factories and Injectors for Synchrotrons (p. 1) |
by Nagle, D E |
New Accelerators for Very Heavy Ions - Productions of Super-Elements (p. 5) |
by Ghiorso, A |
Recent Advances in DC Accelerators (p. 16) |
by Rose, P H |
A Decade of Progress in Cyclotrons - - Frequency Modulated and Isochronous (p. 23) |
by Khoe, T K |
High Current DC Ion Beams (p. 29) |
by Kelley, G G |
Studies of an Expanded Plasma Front Duoplasmatron Ion Source (p. 39) |
by Fasolo, J A |
A Study of Duoplasmatron Ion Source with an Expansion Cup (p. 46) |
by Abdel-Aziz, M E |
Characteristics of High Current P. I. G. Ion Source at Low Gas Pressure (p. 53) |
by Abdel-Aziz, M E |
Dynamag Ion Source with Open Cyclindrical Extractor (p. 60) |
by Cleland, M R |
A Penning Discharge Ion Source for High Brightness (p. 65) |
by Bennett, G W |
A Small "Cold-Cathode" High- Intensity Cyclotron Ion Source (p. 70) |
by Wells, D K |
Surface Ionization Ion Sources (p. 72) |
by Wilson, R G |
Production of Negative Helium Ions by Nearly-Resonant Charge Exchange in Potassium (p. 75) |
by Ennis, R M |
Modified He Ion Source Using Cs Vapor Charge Exchange (p. 78) |
by Rose, F A |
Modification of an Ion Source for the Production of Microampere 4He- Beams* (p. 82) |
by John, J |
A High Current Electron Gun Suitable for Use Down to 1 Nanosecond Pulse Length (p. 87) |
by Willard, J |
On the Design of Axially Symmetric Electron Guns (p. 93) |
by Beal, J W |
The Electron Gun for the Stanford Two-Mile Accelerator (p. 98) |
by Miller, R H |
Multiple Beam Pulse Capability of the SLAC Injector (p. 104) |
by Koontz, R F |
A Magnetic Bottle with Electrodes for Trapping Low Energy Electrons (p. 110) |
by Krisciokaitis, R J |
New Developments in High Voltage Technology (p. 113) |
by Trump, J G |
Magnetically Suppressed Accelerator Tubes (p. 122) |
by Howe, F A |
A Differential Pumping Tube for Electrostatic Accelerators (p. 126) |
by Howe, F A |
High Gradient Accelerating Column Design and Construction (p. 129) |
by Lee, G M |
Highly Stabilized Electron Accelerators for Electron Microscopy at Extra-High Voltages (p. 134) |
by Reinhold, G |
Future High Voltage DC Power Supplies of the Shielded Design (p. 139) |
by Reinhold, G |
Simple Improvements in Small High-Voltage DC Power Supplies (p. 143) |
by Langsdorf, A |
Progress in the Development of a 4-MV Positive Ion Accelerator for High Beam Currents (p. 145) |
by Reinhold, G |
An Original Neutron Generator Using a Short Structure Accelerating System and Turbomolecular Pumping (p. 151) |
by Fremiot, C |
Mechanical Design Concepts of Dynamitron Accelerators (p. 157) |
by Mason, C F |
An Improved Control System for Van De Graaff Accelerators (p. 161) |
by Gere, E A |
Terminal Voltage Fluctuations of an FN Tandem Van De Graaff Accelerator (p. 166) |
by Fauska, H |
Multi-Loop Feedback System for Dynamitron Voltage Regulation (p. 169) |
by Thompson, C C |
A Nanosecond Beam Pulsing and Time-of-Flight System for an MP Tandem (p. 174) |
by Purser, K H |
X-Radiation from Van De Graaff Accelerator Ion Sources (p. 181) |
by Bernard, D L |
An Improved Sulphur Hexafluoride Gas Handling System for a Potential Drop Partical Accelerator (p. 187) |
by Marsik, S J |
The MIT High Duty, High Intensity 400-MeV Linear Electron Accelerator (p. 191) |
by Bertozzi, W |
High Duty Factor RF Sources at 800 MHz (p. 197) |
by Hagerman, D C |
Fast Automatic Phase and Amplitude Control of High-Power RF Systems (p. 205) |
by Jameson, R A |
Optimum Generator Characteristics of RF Amplifiers for Heavily Beam-Loaded Accelerators (p. 213) |
by Boyd, T J |
The RF System for the AGS Linac Injector (p. 217) |
by Sheehan, J F |
Design and Performance of the SLAC RF Drive System (p. 223) |
by Farkas, Z D |
RF System Design for the SLAC Storage Ring (p. 229) |
by Allen, M A |
The AGS Conversion RF System (p. 234) |
by Tranis, A |
The AGS Conversion Radio Frequency Power Amplifier (p. 237) |
by Rheaume, R H |
Accelerating System for the Cornell 10 - GeV Electron Synchrotron (p. 241) |
by Tigner, M |
RF Power System for the Separated-Orbit Cyclotron Experiment (p. 246) |
by Mosko, S W |
Experimental Studies of the Omnitron Electrical Components (p. 250) |
by Davis, J W |
A Compact RF System for a 30-Inch AVF Cyclotron (p. 257) |
by Hendry, G O |
A Compact 70 - MW, 250 - KV Modulator Using Thyratrons (p. 260) |
by Latham, C |
Computer Design of UHF Power Amplifier Tubes (p. 266) |
by Liska, D |
The Klystrom - An Ultra High Power RF Energy Source (p. 273) |
by Reid, D W |
Low Distortion RF Amplifier Video Pulses (p. 278) |
by Fox, L J |
Design of Traveling Wave Electron Linear Accelerators (p. 282) |
by Gallagher, W J |
RF Perturbation Measurements in Long Linac Cavities (p. 286) |
by Owen, C W |
Studies of Multistem Drift Tube Accelerator Structures (p. 290) |
by Giordano, S |
Numerical Analysis of the RF Field in a Drift Tube Loaded Cavity (p. 295) |
by Batchelor, K |
Studies of Multi-Drive Excitation for Alvarez Structures (p. 303) |
by Giordano, S |
Design of a 3 Ampere Peak Steady State 0.001 Duty, 10 - MeV Linear Electron Accelerator (p. 307) |
by Whitham, K |
Folded Ferrite Loaded Cavities for Impedance Matching in the AGS (p. 312) |
by Plotkin, M |
RF Accelerating Cavities for AGS Conversion (p. 315) |
by Rakowsky, G |
The Development of 2000 - Ampere Diodes for High Current Ferrite Biasing Supplies (p. 320) |
by Tusting, R F |
Pole-Zero Analysis of Distributed Radio-Frequency Acceleration Systems (p. 328) |
by Katz, J E |
Coaxial Cavities for Separated Orbit Cyclotrons (p. 331) |
by Ziegler, N F |
Low Temperature Aspects of a Cryogenic Accelerator (p. 336) |
by Schwettman, H A |
Accelerating Structures for Superconducting Electron Linacs (p. 345) |
by Weaver, J N |
Proposed Microwave Systems for Superconducting Radiofrequency Beam Separators (p. 350) |
by Halama, H J |
Design Study of a Superconducting Radiofrequency Beam Separator (p. 356) |
by Hahn, H |
The Future of Superconducting Magnets (p. 361) |
by Laverick, C |
Secondary Beam Magnets for the 200 - BeV Accelerator -- Conventional or Superconducting? (p. 372) |
by Meuser, R B |
Selection of a Lamination Shape for a Fast-Cycling Alternating-Gradient Magnet Core (p. 377) |
by Hernandez, H P |
Effect of Fast Neutron Irradiation at Low Temperature on NbZr Coil Performance (p. 383) |
by Benaroya, R |
Elliptical and Circular Current Sheets to Produce a Prescribed Internal Field (p. 386) |
by Beth, R A |
Superconducting Beam Handling Equipment (p. 389) |
by Britton, R B |
Copper-Tape-Wound, Edge-Cooled Solenoid (p. 393) |
by Morris, D W |
Use of Aluminum Coils Instead of Copper Coils in Accelerator Magnet Systems (p. 398) |
by Green, M A |
A Prestressed -Core Hollow-Strap-Coil Test Magnet for the Omnitron (p. 405) |
by Scalise, D T |
A New Hydrodynamic Liquid Cooling Method for Edge-Cooled, Flat Conductor Magnet Coils and for Liquid-Cooled Ferrite RF Resonator Discs (p. 410) |
by Dorward, J G |
Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles (p. 414) |
by Danby, G T |
Drift Tube Quadrupoles (p. 420) |
by Otis, A N |
AGS Low Field Correction Elements (p. 425) |
by Herrera, J C |
Magnet Design for Very High Energy Synchrotron Employing a Separated Function Magnet Lattice (p. 431) |
by Danby, G T |
Methods of Computing the Time Constant and Impedence of Magnets (p. 437) |
by Praeg, W F |
Three Dimensional Properties of Magnetic Beam Transport Elements (p. 442) |
by Danby, G T |
The Beam Transport System of the Michigan State University Cyclotron (p. 450) |
by MacKenzie, G H |
Magnet System for 4- MeV Experimental Separated-Orbit Cyclotron (p. 456) |
by Hudson, E D |
A Sector Magnet for a 10-50 MeV SOC (p. 460) |
by Hudson, E D |
A Fast Sequencing Bipolar Energy Discharge System for the Beam Bumper Magnet in the Zero Gradient Synchrotron (p. 464) |
by Hornstra, F |
Fast Kicker Magnets for the 200 - GeV Accelerator (p. 468) |
by Faltens, A |
Establishment of Precise Magnetic Fields in the Momentum Analyzing System at SLAC (p. 473) |
by Seppi, E J |
A Turbine Driven Rotating Coil Magnetometer (p. 478) |
by Rowe, E M |
Complex of Systems for Measuring the Characteristics and Stabilization of Static Magnetic Fields (p. 482) |
by Denisov, Yu N |
Influence of Magnetic Elements on an Isochronous Cyclotron Field (p. 487) |
by Theus, R B |
The 200 - MeV Electron-Positron Storage Ring Magnet Power Supply (p. 493) |
by Hicks, J W |
A Megawatt Solid-State Inverter to Power the Cornell 10 - GeV Electron Synchrotron (p. 496) |
by Kellers, C F |
A Low Ripple Pulsed Phased Back Power Supply (p. 500) |
by Cassel, R |
Flat Topping the PPA Synchrotron Magnet (p. 503) |
by Huttar, D |
Protective Relaying and Monitoring of the Ring Magnet Power Supply for the Argonne National Laboratory Zero Gradient Synchrotron (p. 507) |
by Visser, A T |
Fault Detection in Synchrotron Magnet Coils (p. 512) |
by Rohrmayer, A |
The Failure of the Alternators of the Nimrod Main Magnet Power Supply (p. 517) |
by Brooks, H C |
Review of Dynamic Instabilities in Circular Accelerators (p. 522) |
by Neil, V K |
Electron Linac Instabilities (p. 529) |
by Loew, G A |
A Method of Computing Generalized Orbit Constants in Synchrotron Lattices (p. 541) |
by Morgan, G H |
Studies of Resonant Synchrotron Oscillation Effects Using Moser Transformations (p. 546) |
by Steban, J D |
Orbits in Fixed Field Alternating Gradient Synchrotron (p. 552) |
by Chien, C S |
Revised Linac Beam Dynmics Equations (p. 557) |
by Schnizer, B |
Theory of Longitudinal Instabilities in Synchrotrons, with Applications (p. 562) |
by Pease, R L |
Beam-Envelope Oscillations with Space Charge in Circular Particle Accelerators (p. 567) |
by Lapostolle, Pierre M |
On the Design of a High Intensity Proton Linear Accelerator (p. 572) |
by Lapostolle, Pierre M |
Computer Calculations of Effect of Space Charge on Longitudinal Beam Dynamics in Proton Linear Accelerators (p. 577) |
by Benton, A |
Space Charge Effects in High Current Linear Electron Accelerator Injection Systems (p. 581) |
by Williams, C B |
A Relativistically Corrected Three Dimensional Space Charge Analysis of Electron Bunching (p. 586) |
by Haimson, J |
Space-Charge Effects on the Quadropole Focusing System in Low-Energy Proton Linear Accelerators (p. 594) |
by Ohnuma, S |
Throbbing Beam Instabilities in Particle Accelerators and Storage Rings (p. 602) |
by Lee, M J |
Space Charge Defocussing of Bunched Beams (p. 607) |
by Gallagher, W J |
Longitudinal Space Charge Effects in RF Buckets (p. 612) |
by Trzeciak, W S |
Computer Studies of Orbits in High Energy Microtrons (p. 624) |
by Robinson, C S |
The Design of Low-Beta Insertions for Storage Rings (p. 630) |
by Morton, P L |
Beam Measurements in the Harwell Variable Energy Cyclotron (p. 635) |
by Lawson, J D |
Studies of Beam Behavior in the Energy Region of 50-400 MeV with the Brookhaven Alternating Gradient Synchrotron (p. 641) |
by Van Steenbergen, A |
The Resistive Wall Instability and Damping System in Nimrod (p. 653) |
by Gardner, I S K |
Beam Extraction from the Proton Synchrotron (p. 660) |
by Barton, M Q |
Use of a Debuncher to Obtain Variable Energy from A Linear Accelerator Beam (p. 666) |
by Myers, W |
A Proposed System for Multi-Cycle Injection of Positrons and Electrons into the 6-GeV Cambridge Electron Accelerator (p. 670) |
by Robinson, K W |
Adjustment and Test of the 300 - MeV Extraction System For the NASA 600 - MeV Synchrocyclotron (p. 677) |
by Younger, F C |
External Beam Performance at P. P. A. (p. 684) |
by Kirchgessner, J |
ZGS External Proton Beam (p. 688) |
by Ratner, L G |
A New Scheme of Beam Extraction of the Argonne Zero Gradient Synchrotron (p. 693) |
by Martin, J H |
Radiofrequency Stimulation of Resonant Slow Extraction Systems (p. 696) |
by Robertson, D S |
Slow Extraction from FFAG Accelerators (p. 702) |
by Hammer, C L |
Completion of Construction and Initial Operation of the SLAC Accelerator (p. 705) |
by Neal, R B |
The General Atomic Coupled Electron Linear Accelerator (p. 721) |
by Adcock, D R |
Operation and Performance of a Compact, Isochronous Cyclotron (p. 729) |
by Mulady, J R |
A Small Helium-3 Cyclotron (p. 733) |
by Main, R M |
Performance Characteristics of the ZGS (p. 740) |
by Martin, R L |
The Operational Experience with Nimrod (p. 743) |
by Gray, D A |
Design of a 15-MeV CW Microtron (p. 749) |
by Wintersteiner, P P |
Four-Sector Racetrack Microtrons (p. 756) |
by Froelich, H R |
A 4-MeV Experimental Separated-Orbit Cyclotron (p. 760) |
by Worsham, R E |
Nevis Synchrocyclotron Improvement Program (p. 764) |
by Cohen, R |
Choice of the Injector System for the 200 - BeV Accelerator (p. 767) |
by Peterson, J M |
RF System Considerations in Interlaced-Beam Injector Synchrotrons (p. 773) |
by Tool, G S |
Electron Beams from 1011 - 1012 Watt Pulsed Accelerators (p. 777) |
by Link, W T |
The Generation and Diagnosis of Pulsed Relativistic Electron Beams Above 1010 Watts (p. 782) |
by Graybill, S E |
Intense, Nanosecond Electron Beams (p. 789) |
by Charbonnier, F M |
Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings (p. 794) |
by Milleron, N |
A Vacuum Chamber System for High Radiation Environment (p. 804) |
by Hanson, W B |
A Ceramic Vacuum Chamber for a Fast-Cycling Proton Synchrotron (p. 809) |
by Clee, P T |
Experience with Metal and Epoxy Vacuum Chambers and the Development of Alumina Ceramic Vacuum Chambers at the CEA (p. 815) |
by Hay, R D |
Vacuum Behaviour of Various Materials with Radiation and Heat (p. 821) |
by Gould, C L |
Improvement of Hydrogen Pumping Characteristics of Penning Discharge Getter-Ion-Pumps (p. 831) |
by Turner, C M |
Economical Powering of a Large Multiplicity of Sputter-Ion Pumps (p. 836) |
by Carides, T |
Fast-Acting Valve (p. 838) |
by Moenich, J S |
The Engineering of Accelerator Facilities (p. 843) |
by Gordon, H S |
Operation of Accelerators Directly Off the Utility System (p. 849) |
by Rohrmayer, A |
Expansion of the Bevatron External Proton Beam Experimental Facilities (p. 854) |
by Lou, K H |
The Physical Design of a 200 - MeV Linac Facility (p. 860) |
by Grand, P |
Conversion of AGS Ring to Modular Construction (p. 867) |
by Hoober, D |
Modular Accelerator Design (p. 872) |
by Tom, J L |
Variable Energy Cyclotron (p. 876) |
by McFarlin, W A |
The Maryland University Sectored Isochronous Cyclotron - MUSIC (p. 881) |
by Leboutet, H |
Capability vs Cost for Servicing and Handling System Choices in 200 - BeV Accelerator Design Study (p. 887) |
by Salsig, W W |
Selection of Injector Synchrotron Parameters to Minimize Cost of the 200 - BeV Accelerator (p. 892) |
by Selph, F B |
Computer-Aided Recording of Control Wiring (p. 898) |
by Featherstone, R P |
Precision Alignment of a Large Beam Transport System (p. 903) |
by Herrmannsfeldt, W B |
Handling High Power Electron Beams (p. 908) |
by Penner, S |
Design, Construction, and Early Operating Experience of the SLAC Beam Switchyard and Experimental Areas (p. 918) |
by Weidner, H |
Beam Dumps, Energy Slits and Collimators at SLAC - - Their Final Versions and First Performance Data (p. 923) |
by Walz, D R |
System for Guiding a Relativistic High-Current Electron Beam (p. 928) |
by Sherwood, W A |
Water Cooled Targets for Intense Ion Beams (p. 933) |
by Hanley, P R |
Rotating Neutron Target System (p. 938) |
by Booth, R |
High Current Target for Positive Ion Accelerators (p. 943) |
by Seiler, R F |
A High-Power Windowless Gas Target (p. 945) |
by Lidsky, L M |
A High Power Positron Conversion Target for an Electron Linac (p. 950) |
by Parkins, M F |
Secondary Beam Targetry Developments (p. 955) |
by Marcks, D F |
Targetry Used on the Bevatron to Extract Secondary Experimental Beams (p. 960) |
by Stone, K F |
Radiation Problems with High-Energy Proton Accelerators (p. 965) |
by Gilbert, W S |
Residual Radiation Studies for Medium Energy Proton Accelerators (p. 977) |
by Fulmer, C B |
Induced Radioactivity and Related Measurements in a 3 - GeV High Current Proton Synchrotron (p. 980) |
by Awschalom, M |
A Survey of Radiation Doses and Induced Activity at the ZGS from September 1965 to September 1966 (p. 985) |
by Lucks, H |
Radioactivity Produced by a Linac (p. 990) |
by Wyckoff, J M |
Remote Maintenance Techniques Proposed for the 200 - GeV Accelerator (p. 997) |
by Krevitt, R |
Automatically and Remotely Welded and Removable Weld Flange Vacuum Joint (p. 1004) |
by Voss, J M |
The AGS Magnet Enclosure Beam Spill and Personnel Saftey Monitor (p. 1010) |
by Distenfeld, C H |
The NBS Linac Master Control and Personnel Protection System (p. 1016) |
by Spokas, O E |
The Control System for the Stanford Linear Accelerator (p. 1022) |
by Mallory, K B |
Computer Control of the Los Alamos Linear Accelerator (p. 1030) |
by Butler, H S |
Experiments in Computer Control and Analysis of the AGS (p. 1042) |
by Frankel, R |
Digital Computer Control of the Bevatron Inflection System (p. 1044) |
by Lancaster, H D |
The Multiplex Control System for the Cornell 10 - GeV Synchrotron (p. 1050) |
by Littauer, R M |
Beam Manipulation Equipment at the Zero Gradient Synchrotron (p. 1053) |
by Trendler, R C |
On-Line Computer Preparation of Tune Profiles of the Zero Gradient Synchrotron (p. 1057) |
by Knott, M J |
Instrumentation and Electronics for the SLAC Beam Switchyard (p. 1061) |
by Scholl, R |
The SLAC Beam Switchyard Control Computer (p. 1066) |
by Howry, S K |
Control of the Beam Spill at the PPA (p. 1071) |
by Henness, J |
Data Transmission Across High Voltage Interfaces Via Light Links (p. 1074) |
by Budge, E C |
Crossing High-Voltage Interfaces with Large Bandwidth Signals (p. 1078) |
by Severns, R P |
A Solid State Control and Logic System for Beam Handling and Ion Optics External to the NRL Isochronous Cyclotron (p. 1082) |
by Gordon, S E |
Control of Betatron Oscillations in a Cyclotron by Use of an On-Line Computer (p. 1087) |
by Lösel, M E |
Damping Coherent Oscillations in the AGS (p. 1091) |
by Raka, E C |
The SLAC Long Ion Chamber System for Machine Protection (p. 1096) |
by Fishman, M |
High Current Beam Scanner (p. 1099) |
by Wegner, H E |
A Low Frequency Beam Position Monitor (p. 1106) |
by Johnston, L |
Beam Monitors Based on Light Observation for the Beam Switchyard of the Stanford Two-Mile Linear Accelerator (p. 1111) |
by Coombes, R W |
AGS Injector Beam Monitoring System (p. 1116) |
by Otis, A |
Microwave Beam Position Monitors at SLAC (p. 1127) |
by Farinholt, E V |
Measurement of Charge Emission from Targets as a Means of Burst Intensity and Beam Intensity Monitoring (p. 1132) |
by Budal, K |
Plunging Faraday Cup System and a Slit System for Use in the Zero Gradient Synchrotron Short Straight Sections (p. 1138) |
by Batch, R V |
A Single Pulse Transverse Phase Space Beam Analyser (p. 1143) |
by Sluyters, T |
A Diagnostic System for Optimization of the External Beam Quality of the Oak Ridge Isochronous Cyclotron (p. 1151) |
by Lord, R S |
Measurement and Monitoring of the Ejected Proton Beam "58" of the CERN Proton Synchrotron (p. 1155) |
by Agoritsas, V |
The CERN Storage Ring Project (p. 1161) |
by Johnsen, Kjell |
Storage Rings for Electrons and Positrons (p. 1169) |
by Mills, F E |
Microwave Electron Accelerators in the Medium Energy Range (p. 1174) |
by Nunan, C S |
Design Study on 1000 - GeV Cybernetic Accelerator and 1 - GeV Model (p. 1186) |
by Vasilev, A A |
The Serpukov 70 - GeV Accelerator (p. 1190) |
by Myae, E A |
Related Techniques in Thermonuclear Research (p. 1192) |
by Kerst, D W |
Present Day Electron Synchrotrons for Energies above 3- GeV (p. 1197) |
by McDaniel, B D |
Proton Synchrotrons for Energies above 20- GeV (p. 1204) |
by Blewett, John Pauls |
Automatically and remotely welded and removable weld flange vacuum joint |
by Voss, J M |