HP Imaging Oil

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking


Important information *** This Safety Data Sheet is only authorised for use by HP for HP Original products. Any
unauthorised use of this Safety Data Sheet is strictly prohibited and may result in legal action
being taken by HP. ***
1.1. Product identifier
Trade name or designation HP Indigo Imaging Oil for use with HP Indigo Digital Press 10000 series and 50000 (RF)
of the mixture Q4313A
Registration number -
UFI: R9VJ-U1JH-0308-AAYF
Synonyms Part Number Q4313A
Issue date 18-Feb-2014
Version number 17
Revision date 04-Mar-2023
Supersedes date 25-Jan-2023
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses HP product for use with HP Indigo Digital Presses 10000 series and 50000.
Uses advised against None known.
1.3. Details of the supplier of the safety data sheet
HP Inc UK Ltd, Regulatory Enquiries, Earley West
300 Thames Valley Park Drive, Reading, RG6 1PT
Telephone +44 20 7660 0596 (Consumer)
+44 20 7660 0403 (Commercial)

HP Inc. health effects line


(Toll-free within the US) 1-800-457-4209
(Direct) 1-760-710-0048
HP Inc. Customer Care
Line
(Toll-free within the US) 1-800-474-6836
(Direct) 1-208-323-2551
Email: [email protected]
1.4 Emergency telephone +44 20 35147487
number

SECTION 2: Hazards identification


2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 as amended
Health hazards
Aspiration hazard Category 1 H304 - May be fatal if swallowed
and enters airways.

2.2. Label elements


Label according to Regulation (EC) No. 1272/2008 as amended
Contains: Alkanes C11-15 iso, White Mineral Oil
Hazard pictograms

Signal word Danger


Hazard statements

H304 May be fatal if swallowed and enters airways.

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 1/8
Precautionary statements
Prevention
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P280 Wear personal protective equipment/face protection.
Response
P301 + P330 + P331 If swallowed: Rinse mouth. Do NOT induce vomiting.
P301 + P310 If swallowed: Immediately call a poison center/doctor.
Storage
P405 Store locked up.
Disposal
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Supplemental label information None.
2.3. Other hazards None known.

SECTION 3: Composition/information on ingredients


3.2. Mixtures
General information
Chemical name % CAS-No. / EC No. REACH Registration No. Index No. Notes
Alkanes C11-15 iso <100 90622-58-5 01-2119456810-40-XXXX -
920-901-0
Classification: Aspiration Toxicity 1;H304
White Mineral Oil <1 8042-47-5 - -
232-455-8
Classification: Aspiration Toxicity 1;H304

SECTION 4: First aid measures


General information Not available.
4.1. Description of first aid measures
Inhalation If overcome by vapor, remove person from exposure to fresh air. If breathing is difficult, give
oxygen. If symptoms persist, get medical attention.
Skin contact Wash affected areas thoroughly with mild soap and water.
Immediately take off all contaminated clothing. Wash clothing separately before reuse.
Get medical attention if irritation develops or persists.
Eye contact Do not rub eyes. Immediately flush with large amounts of clean, warm water (low pressure) for at
least 15 minutes or until particles are removed. If irritation persists get medical attention.
Do not apply neutralizing agents.
Ingestion Do not induce vomiting. Never give anything by mouth to an unconscious person.
If ingestion of a large amount does occur, seek medical attention.
4.2. Most important symptoms Not available.
and effects, both acute and
delayed
4.3. Indication of any Not available.
immediate medical attention
and special treatment needed

SECTION 5: Firefighting measures


General fire hazards Not available.
5.1. Extinguishing media
Suitable extinguishing Suitable extinguishing media: Dry chemical, CO2, water spray or regular foam.
media
Unsuitable extinguishing None known.
media
5.2. Special hazards arising Refer to section 10.
from the substance or mixture
5.3. Advice for firefighters
Special protective Not available.
equipment for firefighters
Special fire fighting Move containers from fire area if you can do it without risk.
procedures Evacuate area and fight fire from a safe distance.

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 2/8
Specific methods Move container from fire area if it can be done without risk.
Evacuate area and fight fire from a safe distance.

SECTION 6: Accidental release measures


6.1. Personal precautions, protective equipment and emergency procedures
For non-emergency Wear appropriate personal protective equipment.
personnel
For emergency responders Not available.
6.2. Environmental precautions Do not let product enter drains. Do not flush into surface water or sanitary sewer system.
6.3. Methods and material for Not available.
containment and cleaning up
6.4. Reference to other See Section 8 of the SDS for Personal Protective Equipment.
sections

SECTION 7: Handling and storage


7.1. Precautions for safe Avoid prolonged or repeated skin contact with this material. Avoid contact with skin, eyes and
handling clothing.
Keep away from open flames, hot surfaces and sources of ignition.
Do not reuse the empty container. Take precautionary measures against static discharges.
7.2. Conditions for safe Keep away from excessive heat or cold. Store in a cool and shaded area. Do not store in direct
storage, including any sunlight.
incompatibilities
7.3. Specific end use(s) Not available.

SECTION 8: Exposure controls/personal protection


8.1. Control parameters
Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values No biological exposure limits noted for the ingredient(s).
Recommended monitoring Not available.
procedures
Derived no effect levels Not available.
(DNELs)
Predicted no effect Not available.
concentrations (PNECs)
Exposure guidelines Manufacturer recommended exposure limit based on petroleum hydrocarbon at > 95%. TWA =
171ppm (1200 mg/m3).
8.2. Exposure controls
Appropriate engineering Use in a well ventilated area.
controls
Individual protection measures, such as personal protective equipment
General information Use personal protective equipment to minimize exposure to skin and eye.
Eye/face protection Not available.
Skin protection
- Hand protection Not available.
- Other Chemical resistant gloves.
Respiratory protection Not available.
Thermal hazards Not available.
Hygiene measures Handle in accordance with good industrial hygiene and safety practice.

Use personal protective equipment to minimize exposure to skin and eye.


Environmental exposure Not available.
controls

SECTION 9: Physical and chemical properties


9.1. Information on basic physical and chemical properties
Appearance clear liquid
Physical state Liquid.
Form Liquid.
Color Colorless.
Odor mild hydrocarbon-like
Odor threshold Not available.

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 3/8
pH Not available.
Melting point/freezing point Not available.
Initial boiling point and boiling 370.4 °F (188 °C) (based on petroleum hydrocarbon)
range
Flash point 147.2 °F (64.0 °C) Pensky-Martens Closed Cup (based on Petroleum Hydrocarbon)
Evaporation rate Not available.
Flammability (solid, gas) Not available.
Upper/lower flammability or explosive limits
Explosive limit - lower (%) Not available.
Explosive limit - upper (%) Not available.
Vapor pressure Not available.
Relative vapor density Not available.
Solubility(ies)
Solubility (water) Not soluble in water
Partition coefficient Not available.
(n-octanol/water)
Auto-ignition temperature Not available.
Decomposition temperature Not available.
Viscosity Not available.
Explosive properties Not available.
Oxidizing properties Not applicable.
9.2. Other information
Density 0.77 g/cm3
Specific gravity 0.771
VOC 770 g/L (6.34 lbs/gal.US) (Calculated)

SECTION 10: Stability and reactivity


10.1. Reactivity Not available.
10.2. Chemical stability Stable under recommended storage conditions.
10.3. Possibility of hazardous Will not occur.
reactions
10.4. Conditions to avoid Not available.
10.5. Incompatible materials This product may react with strong oxidizing agents.
10.6. Hazardous Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular
decomposition products weight hydrocarbons.

SECTION 11: Toxicological information


General information Refer to Section 2 for potential health effects and Section 4 for first aid measures.
Information on likely routes of exposure
Inhalation Under normal conditions of intended use, this material is not expected to be an inhalation hazard.
Skin contact Contact with skin may result in mild irritation.
Eye contact Contact with eyes may result in mild irritation.
Ingestion Ingestion is not a likely route of exposure. Health injuries are not known or expected under normal
use.
Symptoms Not available.
11.1. Information on toxicological effects

Acute toxicity Harmful if swallowed.


Components Species Test Results
White Mineral Oil (CAS 8042-47-5)
Acute
Dermal
LD50 Rat >= 5000 mg/kg
Oral
LD50 Rat >= 5000 mg/kg
Skin corrosion/irritation Not classified.
Material name: Q4313A SDS GREAT BRITAIN
10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 4/8
Serious eye damage/eye Not classified.
irritation
Respiratory sensitization Not classified.
Skin sensitization Mildly irritating to the skin with prolonged exposure.
Germ cell mutagenicity Not classified.
Carcinogenicity Not classified.
Reproductive toxicity Not classified.
Specific target organ toxicity - Not classified.
single exposure
Specific target organ toxicity - Not classified.
repeated exposure
Aspiration hazard May be harmful if swallowed and enters airways.
Mixture versus substance Not available.
information
Other information No data is available on the product itself.

SECTION 12: Ecological information


12.1. Toxicity No toxicity data noted for the ingredient(s).
Aquatic toxicity This product has not been tested for ecological effects.

12.2. Persistence and No data is available on the degradability of this product.


degradability
12.3. Bioaccumulative potential No data available on bioaccumulation.
Partition coefficient Not available.
n-octanol/water (log Kow)
Bioconcentration factor (BCF) Not available.
12.4. Mobility in soil Not available.
12.5. Results of PBT and vPvB Not a PBT or vPvB substance or mixture.
assessment
12.6. Other adverse effects Not available.

SECTION 13: Disposal considerations


13.1. Waste treatment methods
Residual waste Not available.
Contaminated packaging Do not re-use empty containers.
Empty containers should be taken to an approved waste handling site for recycling or disposal.
EU waste code 08 03 13 - waste ink other than those mentioned in 08 03 12
Disposal methods/information Do not dispose of together with general office waste. Do not allow this material to drain into
sewers/water supplies.

Dispose of waste material according to Local, State, Federal, and Provincial Environmental
Regulations. Ensure collection and disposal with an appropriately licensed waste contractor.

SECTION 14: Transport information


DOT
UN number Not available.
UN proper shipping name Not Regulated
Transport hazard class(es)
Class Not available.
Subsidiary risk -
Packing group Not available.
Environmental hazards
Marine pollutant No
Special precautions for user Not available.
IATA
UN number Not available.
UN proper shipping name Not Regulated.
Transport hazard class(es)
Class Not available.
Subsidiary risk -
Material name: Q4313A SDS GREAT BRITAIN
10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 5/8
Packing group Not available.
Environmental hazards No.
Special precautions for user Not available.
IMDG
UN number Not available.
UN proper shipping name Not Regulated.
Transport hazard class(es)
Class Not available.
Subsidiary risk -
Packing group Not available.
Transport hazard class(es)
Marine pollutant No.
EmS Not available.
Special precautions for user Not available.
ADR
UN number Not available.
UN proper shipping name Not Regulated.
Transport hazard class(es)
Class Not available.
Subsidiary risk -
Hazard No. (ADR) Not available.
Tunnel restriction code Not available.
Packing group Not available.
Environmental hazards No.
Special precautions for user Not available.
Further information Transport in bulk according to Annex II of MARPOL73/78 and the IBC code: Not applicable.

Not a dangerous good under DOT, IATA, ADR, IMDG, or RID.

SECTION 15: Regulatory information


15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Retained direct EU regulations
Regulation (EC) No. 1005/2009 on substances that deplete the ozone layer, Annex I and II, as amended
Not listed.
Regulation (EU) 2019/1021 On persistent organic pollutants (recast), as amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 1 as amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 2 as amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex I, Part 3 as amended
Not listed.
Regulation (EU) No. 649/2012 concerning the export and import of dangerous chemicals, Annex V as amended
Not listed.
Regulation (EC) No. 166/2006 Annex II Pollutant Release and Transfer Registry, as amended
Not listed.
Regulation (EC) No. 1907/2006, REACH Article 59(10) Candidate List as currently published by ECHA
Not listed.
Authorizations
Regulation (EC) No. 1907/2006, REACH Annex XIV Substances subject to authorization, as amended
Not listed.
Restrictions on use
Regulation (EC) No. 1907/2006, REACH Annex XVII Substances subject to restriction on marketing and use as amended
Not listed.
Other EU regulations
Directive 2012/18/EU on major accident hazards involving dangerous substances, as amended
Not listed.

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 6/8
Other regulations
HP complies with chemical regulatory requirements in chemical substance notification laws, where applicable. All chemical
substances are notified or exempt from notification or listed in the inventory as existing substances in the following countries: US
(TSCA), Canada (DSL/NDSL), Australia (AICIS), Japan (ISHL, ENCS), Philippines (PICCS), New Zealand (NZIoC) and China
(IECSC). For guidance on importation and/or additional requirements for registration schemes such as EAEU, EU, South Korea,
Turkey, UK, India and Taiwan, please contact the Sustainability and Compliance Center ([email protected]).

Not available.
15.2. Chemical safety See attached SUMI or GEIS document, if applicable.
assessment
Other information This Safety Data Sheet complies with the requirements of Regulation (EU) 2015/830.
Classification according to Regulation (EC) No 1272/2008 as amended.

SECTION 16: Other information


References Regulation (EC) No. 1907/2006 of December 18, 2006 concerning the Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH) and establishing a European Chemicals
Agency (REACH).

Regulation (EC) No. 1272/2008 of December 16, 2008 on classification, labeling and packaging of
substances and mixtures, and amendments (CLP).

The information in this document is based on the present state of our knowledge, including but not
limited to the data present in the registrations of the ingredients, it does not purport to be
all-inclusive and shall be used only as a guide.

Information on evaluation The classification for health and environmental hazards is derived by a combination of calculation
method leading to the methods and test data, if available.
classification of mixture
Full text of any statements, H304 May be fatal if swallowed and enters airways.
which are not written out in full
under sections 2 to 15
Revision information SECTION 15: Regulatory information: International regulations
SECTION 16: Other information: Disclaimer
Training information Follow training instructions when handling this material.
Disclaimer This Safety Data Sheet document is provided without charge to customers of HP. Data is the most
current known to HP at the time of preparation of this document and is believed to be accurate. It
should not be construed as guaranteeing specific properties of the products as described or
suitability for a particular application. This document was prepared to the requirements of the
jurisdiction specified in Section 1 above and may not meet regulatory requirements in other
countries.

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 7/8
Explanation of abbreviations

ACGIH American Conference of Governmental Industrial Hygienists


CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR Code of Federal Regulations
COC Cleveland Open Cup
DOT Department of Transportation
EPCRA Emergency Planning and Community Right-to-Know Act (aka SARA)
IARC International Agency for Research on Cancer
NIOSH National Institute for Occupational Safety and Health
NTP National Toxicology Program
OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
RCRA Resource Conservation and Recovery Act
REC Recommended
REL Recommended Exposure Limit
SARA Superfund Amendments and Reauthorization Act of 1986
STEL Short-Term Exposure Limit
TCLP Toxicity Characteristics Leaching Procedure
TLV Threshold Limit Value
TSCA Toxic Substances Control Act
VOC Volatile Organic Compounds

Material name: Q4313A SDS GREAT BRITAIN


10586 Version #: 17 Revision date: 04-Mar-2023 Issue date: 18-Feb-2014 8/8
Safe Use of Mixtures Information (SUMI)
--
Maintenance fluid digital printing: MF02 *English*
Disclaimer
This SUMI is a generic document for communicating conditions of safe use of a product in response to the REACH obligation. This document relates only to conditions
of safe use and is not specific to a product. By adding this SUMI to a specific product SDS, the importer/formulator declares that the mixture can safely be used
following the instructions below. Following occupational health legislation, the employer of workers remains responsible for communicating relevant use information
to employees. When developing workplace instructions for employees, SUMI Sheets should always be considered in combination with the SDS and the label of the
product. Derived No Effect Levels (DNEL) and Predicted No Effect Concentration (PNEC) values of substances derived from the Chemical Safety Assessment (CSA) will
be given in section 8 of the SDS. The REACH registration number(s), where applicable, completes an extended product SDS.

Operational conditions
Maximum duration Up to 1 hour per day.
Frequency of exposure < 240 days per year.
Physical state Liquid.
Process conditions Covers use at ambient temperatures.
Provide a good standard of controlled ventilation (10 to 15 air changes per hour).
Keep emissions below the occupational exposure limits of the ingredients specified in section 8 of the SDS.
Avoid direct contact.
Regular cleaning of equipment and work area.
Supervision in place to check that Risk Management Measures (RMM's) in place are being correctly used and Operational
Conditions (OC's) followed.
Risk management measures
Conditions and measures Wear safety glasses with side shields (or goggles), if splashing is possible.
related to Personal Protection Wear appropriate chemical resistent gloves: see section 8 of the SDS.
Equipment, hygiene and health Wear appropriate chemical resistent clothing.
evaluation. Provide adequate ventilation. In case of insufficient ventilation wear suitable respiratory equipment.
Eye wash station and emergency showers are recommended.
Avoid breathing mist/vapours.
Avoid contact with skin, eyes and clothing.
Training of workers in relation to proper use and maintenance of all Personal protection equipment (PPE) must be ensured.

Good practice advice


Use personal protective equipment as required.
Wash hands before breaks and after work.
Keep good industrial hygiene and safety practice.
Use only with adequate ventilation.
Do no eat, drink or smoke when using this product.
Wash contaminated clothing before reuse.
Store at room temperature.
Environmental measures
Do not allow this material to drain into sewers/water supplies.
Dispose of waste material according to Local, State, Federal and Provincial Environmental Regulations.
Ensure collection and disposal with appropriately licenced waste contractor.
Use descriptors
IS-Use at industrial sites.
PW-Widespread use by professional workers.
SU7-Printing and reproduction media.
PC35-Washing and cleaning products.
PROC7 Industrial spraying.
PROC8a-Transfer of substance or mixture (charging and discharging) at non-dedicated facilities.
PROC8b-Transfer of substance or mixture (charging and discharging) at dedicated facilities.
PROC11-Non-industrial spraying.
PROC28 - Manual maintenance (cleaning and repair) of machinery.
ERC4-Use of non-reactive processing aid at industrial site (no inclusion into or onto article).
ERC8a-Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor).
Additional information on product composition
In section 2 of the SDS as well as on the label, the classification of the mixture is provided.
All ingredients contributing to the classification are stated in Section 3 of the SDS.
Relevant limit values of ingredients on which the exposure assessment is based, are listed in section 8 of the SDS.
The product may contain sensitizing ingredients that may cause allergic reaction to certain people.
Section 2 of the SDS states these ingredients where applicable.
MF02_English.pdf

You might also like