5/7/23, 9:12 PM Variables in Python – Real Python

Variables in Python
by John Sturtz  24 Comments  basics python

Mark as Completed   Tweet  Share  Email

Table of Contents
Variable Assignment
Variable Types in Python
Object References
Object Identity
Variable Names
Reserved Words (Keywords)
Conclusion

 Remove ads

 Watch Now This tutorial has a related video course created by the Real Python team. Watch it together with the
written tutorial to deepen your understanding: Variables in Python

In the previous tutorial on Basic Data Types in Python, you saw how values of various Python data types can be
created. But so far, all the values shown have been literal or constant values:

Python >>>

>>> print(5.3)
5.3

If you’re writing more complex code, your program will need data that can change as program execution proceeds.

Here’s what you’ll learn in this tutorial: You will learn how every item of data in a Python program can be described
by the abstract term object, and you’ll learn how to manipulate objects using symbolic names called variables.

Free PDF Download: Python 3 Cheat Sheet

https://realpython.com/python-variables/ 1/10
5/7/23, 9:12 PM Variables in Python – Real Python

 Take the Quiz: Test your knowledge with our interactive “Python Variables” quiz. Upon completion you will
receive a score so you can track your learning progress over time:

Take the Quiz »

Variable Assignment
Think of a variable as a name attached to a particular object. In Python, variables need not be declared or defined in
advance, as is the case in many other programming languages. To create a variable, you just assign it a value and then
start using it. Assignment is done with a single equals sign (=):

Python >>>

>>> n = 300

This is read or interpreted as “n is assigned the value 300.” Once this is done, n can be used in a statement or
expression, and its value will be substituted:

Python >>>

>>> print(n)
300

Just as a literal value can be displayed directly from the interpreter prompt in a REPL session without the need for
print(), so can a variable:

Python >>>

>>> n
300

Later, if you change the value of n and use it again, the new value will be substituted instead:

Python >>>

>>> n = 1000
>>> print(n)
1000
>>> n
1000

Python also allows chained assignment, which makes it possible to assign the same value to several variables
simultaneously:

Python >>>

>>> a = b = c = 300
>>> print(a, b, c)
300 300 300

The chained assignment above assigns 300 to the variables a, b, and c simultaneously.

 Remove ads

Variable Types in Python

In many programming languages, variables are statically typed. That means a variable is initially declared to have a
specific data type, and any value assigned to it during its lifetime must always have that type.

Variables in Python are not subject to this restriction. In Python, a variable may be assigned a value of one type and
then later re-assigned a value of a different type:

https://realpython.com/python-variables/ 2/10
5/7/23, 9:12 PM Variables in Python – Real Python

Python >>>

>>> var = 23.5

>>> print(var)
23.5

>>> var = "Now I'm a string"

>>> print(var)
Now I'm a string

Object References
What is actually happening when you make a variable assignment? This is an important question in Python, because
the answer differs somewhat from what you’d find in many other programming languages.

Python is a highly object-oriented language. In fact, virtually every item of data in a Python program is an object of a
specific type or class. (This point will be reiterated many times over the course of these tutorials.)

Consider this code:

Python >>>

>>> print(300)
300

When presented with the statement print(300), the interpreter does the following:

Creates an integer object

Gives it the value 300
Displays it to the console

You can see that an integer object is created using the built-in type() function:

Python >>>

>>> type(300)
<class 'int'>

A Python variable is a symbolic name that is a reference or pointer to an object. Once an object is assigned to a
variable, you can refer to the object by that name. But the data itself is still contained within the object.

For example:

Python >>>

>>> n = 300

This assignment creates an integer object with the value 300 and assigns the variable n to point to that object.

Variable Assignment

The following code verifies that n points to an integer object:

Python >>>

>>> print(n)
300
>>> type(n)
<class 'int'>

Now consider the following statement:

https://realpython.com/python-variables/ 3/10
5/7/23, 9:12 PM Variables in Python – Real Python

Python >>>

>>> m = n

What happens when it is executed? Python does not create another object. It simply creates a new symbolic name or
reference, m, which points to the same object that n points to.

Multiple References to a Single Object

Next, suppose you do this:

Python >>>

>>> m = 400

Now Python creates a new integer object with the value 400, and m becomes a reference to it.

References to Separate Objects

Lastly, suppose this statement is executed next:

Python >>>

>>> n = "foo"

Now Python creates a string object with the value "foo" and makes n reference that.

Orphaned Object

There is no longer any reference to the integer object 300. It is orphaned, and there is no way to access it.

Tutorials in this series will occasionally refer to the lifetime of an object. An object’s life begins when it is created, at
which time at least one reference to it is created. During an object’s lifetime, additional references to it may be
created, as you saw above, and references to it may be deleted as well. An object stays alive, as it were, so long as
there is at least one reference to it.

When the number of references to an object drops to zero, it is no longer accessible. At that point, its lifetime is over.
Python will eventually notice that it is inaccessible and reclaim the allocated memory so it can be used for something
else. In computer lingo, this process is referred to as garbage collection.

 Remove ads

https://realpython.com/python-variables/ 4/10
5/7/23, 9:12 PM Variables in Python – Real Python

Object Identity
In Python, every object that is created is given a number that uniquely identifies it. It is guaranteed that no two
objects will have the same identifier during any period in which their lifetimes overlap. Once an object’s reference
count drops to zero and it is garbage collected, as happened to the 300 object above, then its identifying number
becomes available and may be used again.

The built-in Python function id() returns an object’s integer identifier. Using the id() function, you can verify that two
variables indeed point to the same object:

Python >>>

>>> n = 300
>>> m = n
>>> id(n)
60127840
>>> id(m)
60127840

>>> m = 400
>>> id(m)
60127872

After the assignment m = n, m and n both point to the same object, confirmed by the fact that id(m) and id(n) return
the same number. Once m is reassigned to 400, m and n point to different objects with different identities.

Deep Dive: Caching Small Integer Values

From what you now know about variable assignment and object references in Python, the following probably
won’t surprise you:

Python >>>

>>> m = 300
>>> n = 300
>>> id(m)
60062304
>>> id(n)
60062896

With the statement m = 300, Python creates an integer object with the value 300 and sets m as a reference to it. n
is then similarly assigned to an integer object with value 300—but not the same object. Thus, they have different
identities, which you can verify from the values returned by id().

But consider this:

Python >>>

>>> m = 30
>>> n = 30
>>> id(m)
1405569120
>>> id(n)
1405569120

Here, m and n are separately assigned to integer objects having value 30. But in this case, id(m) and id(n) are
identical!

For purposes of optimization, the interpreter creates objects for the integers in the range [-5, 256] at startup,
and then reuses them during program execution. Thus, when you assign separate variables to an integer value
in this range, they will actually reference the same object.

https://realpython.com/python-variables/ 5/10
5/7/23, 9:12 PM Variables in Python – Real Python

Variable Names
The examples you have seen so far have used short, terse variable names like m and n. But variable names can be
more verbose. In fact, it is usually beneficial if they are because it makes the purpose of the variable more evident at
first glance.

Officially, variable names in Python can be any length and can consist of uppercase and lowercase letters (A-Z, a-z),
digits (0-9), and the underscore character (_). An additional restriction is that, although a variable name can contain
digits, the first character of a variable name cannot be a digit.

Note: One of the additions to Python 3 was full Unicode support, which allows for Unicode characters in a
variable name as well. You will learn about Unicode in greater depth in a future tutorial.

For example, all of the following are valid variable names:

Python >>>

>>> name = "Bob"

>>> Age = 54
>>> has_W2 = True
>>> print(name, Age, has_W2)
Bob 54 True

But this one is not, because a variable name can’t begin with a digit:

Python >>>

>>> 1099_filed = False

SyntaxError: invalid token

Note that case is significant. Lowercase and uppercase letters are not the same. Use of the underscore character is
significant as well. Each of the following defines a different variable:

Python >>>

>>> age = 1
>>> Age = 2
>>> aGe = 3
>>> AGE = 4
>>> a_g_e = 5
>>> _age = 6
>>> age_ = 7
>>> _AGE_ = 8

>>> print(age, Age, aGe, AGE, a_g_e, _age, age_, _AGE_)

1 2 3 4 5 6 7 8

There is nothing stopping you from creating two different variables in the same program called age and Age, or for that
matter agE. But it is probably ill-advised. It would certainly be likely to confuse anyone trying to read your code, and
even you yourself, after you’d been away from it awhile.

It is worthwhile to give a variable a name that is descriptive enough to make clear what it is being used for. For
example, suppose you are tallying the number of people who have graduated college. You could conceivably choose
any of the following:

https://realpython.com/python-variables/ 6/10
5/7/23, 9:12 PM Variables in Python – Real Python

Python >>>

>>> numberofcollegegraduates = 2500

>>> NUMBEROFCOLLEGEGRADUATES = 2500
>>> numberOfCollegeGraduates = 2500
>>> NumberOfCollegeGraduates = 2500
>>> number_of_college_graduates = 2500

>>> print(numberofcollegegraduates, NUMBEROFCOLLEGEGRADUATES,

... numberOfCollegeGraduates, NumberOfCollegeGraduates,
... number_of_college_graduates)
2500 2500 2500 2500 2500

All of them are probably better choices than n, or ncg, or the like. At least you can tell from the name what the value of
the variable is supposed to represent.

On the other hand, they aren’t all necessarily equally legible. As with many things, it is a matter of personal
preference, but most people would find the first two examples, where the letters are all shoved together, to be harder
to read, particularly the one in all capital letters. The most commonly used methods of constructing a multi-word
variable name are the last three examples:

Camel Case: Second and subsequent words are capitalized, to make word boundaries easier to see.
(Presumably, it struck someone at some point that the capital letters strewn throughout the variable name
vaguely resemble camel humps.)
Example: numberOfCollegeGraduates
Pascal Case: Identical to Camel Case, except the first word is also capitalized.
Example: NumberOfCollegeGraduates
Snake Case: Words are separated by underscores.
Example: number_of_college_graduates

Programmers debate hotly, with surprising fervor, which of these is preferable. Decent arguments can be made for all
of them. Use whichever of the three is most visually appealing to you. Pick one and use it consistently.

You will see later that variables aren’t the only things that can be given names. You can also name functions, classes,
modules, and so on. The rules that apply to variable names also apply to identifiers, the more general term for names
given to program objects.

The Style Guide for Python Code, also known as PEP 8, contains Naming Conventions that list suggested standards
for names of different object types. PEP 8 includes the following recommendations:

Snake Case should be used for functions and variable names.

Pascal Case should be used for class names. (PEP 8 refers to this as the “CapWords” convention.)

 Remove ads

Reserved Words (Keywords)

There is one more restriction on identifier names. The Python language reserves a small set of keywords that
designate special language functionality. No object can have the same name as a reserved word.

In Python 3.6, there are 33 reserved keywords:

Python
Keywords      

False def if raise

None del import return

True elif in try

and else is while

https://realpython.com/python-variables/ 7/10
5/7/23, 9:12 PM Variables in Python – Real Python

Python
Keywords      

as except lambda with

assert finally nonlocal yield

break for not

class from or

continue global pass

You can see this list any time by typing help("keywords") to the Python interpreter. Reserved words are case-sensitive
and must be used exactly as shown. They are all entirely lowercase, except for False, None, and True.

Trying to create a variable with the same name as any reserved word results in an error:

Python >>>

>>> for = 3
SyntaxError: invalid syntax

Conclusion
This tutorial covered the basics of Python variables, including object references and identity, and naming of Python
identifiers.

You now have a good understanding of some of Python’s data types and know how to create variables that reference
objects of those types.

Next, you will see how to combine data objects into expressions involving various operations.

 Take the Quiz: Test your knowledge with our interactive “Python Variables” quiz. Upon completion you will
receive a score so you can track your learning progress over time:

Take the Quiz »

« Basic Data Types in Python Variables in Python Operators and Expressions in

Python »

Mark as Completed   

 Watch Now This tutorial has a related video course created by the Real Python team. Watch it together with the
written tutorial to deepen your understanding: Variables in Python

🐍 Python Tricks 💌

https://realpython.com/python-variables/ 8/10
5/7/23, 9:12 PM Variables in Python – Real Python

Get a short & sweet Python Trick delivered to your inbox every couple of
days. No spam ever. Unsubscribe any time. Curated by the Real Python
team.

Email Address

Send Me Python Tricks »

About John Sturtz

John is an avid Pythonista and a member of the Real Python tutorial team.

» More about John

Each tutorial at Real Python is created by a team of developers so that it meets our high quality standards. The team members who
worked on this tutorial are:

Dan Joanna

Master Real-World Python Skills

With Unlimited Access to Real Python

Join us and get access to thousands of tutorials,

hands-on video courses, and a community of expert
Pythonistas:

https://realpython.com/python-variables/ 9/10
5/7/23, 9:12 PM Variables in Python – Real Python

Level Up Your Python Skills »

What Do You Think?

Rate this article:  

 Tweet  Share  Share  Email

What’s your #1 takeaway or favorite thing you learned? How are you going to put your newfound skills to use?
Leave a comment below and let us know.

Commenting Tips: The most useful comments are those written with the goal of learning from or helping
out other students. Get tips for asking good questions and get answers to common questions in our
support portal.

Looking for a real-time conversation? Visit the Real Python Community Chat or join the next “Office Hours”
Live Q&A Session. Happy Pythoning!

Keep Learning

Related Tutorial Categories: basics python

Recommended Video Course: Variables in Python

 Remove ads

© 2012–2023 Real Python ⋅ Newsletter ⋅ Podcast ⋅ YouTube ⋅ Twitter ⋅ Facebook ⋅ Instagram ⋅

Python Tutorials ⋅ Search ⋅ Privacy Policy ⋅ Energy Policy ⋅ Advertise ⋅ Contact
❤️Happy Pythoning!

https://realpython.com/python-variables/ 10/10