Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    Estane Skythane S190A TPU: Type

    Uploaded by

    juliushasan2
    The document provides technical data and information about Estane Skythane S190A TPU, including its physical properties, mechanical properties, thermal properties, and injection molding guide. It specifies properties like hardness, tensile strength, elongation, tear resistance, compression set, and vicat softening temperature. The injection molding guide provides recommended drying and injection conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Estane Skythane S190A TPU: Type

    Uploaded by

    juliushasan2
    60 views2 pages
    The document provides technical data and information about Estane Skythane S190A TPU, including its physical properties, mechanical properties, thermal properties, and injection molding guide. It specifies properties like hardness, tensile strength, elongation, tear resistance, compression set, and vicat softening temperature. The injection molding guide provides recommended drying and injection conditions.

    Original Title

    S190A TDS

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides technical data and information about Estane Skythane S190A TPU, including its physical properties, mechanical properties, thermal properties, and injection molding guide. It specifies properties like hardness, tensile strength, elongation, tear resistance, compression set, and vicat softening temperature. The injection molding guide provides recommended drying and injection conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views2 pages

    Estane Skythane S190A TPU: Type

    Uploaded by

    juliushasan2
    The document provides technical data and information about Estane Skythane S190A TPU, including its physical properties, mechanical properties, thermal properties, and injection molding guide. It specifies properties like hardness, tensile strength, elongation, tear resistance, compression set, and vicat softening temperature. The injection molding guide provides recommended drying and injection conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Estane Skythane™ S190A TPU® TECHNICAL DATA SHEET

    Type: Estane® Skythane™ S190A is a Shore 92A; polyester based thermoplastic polyurethane
    (TPU). (FDA approved (21 CFR 177.2600, 177.1680)

    Uses: Injection Molding

    Physical Properties Standard No. Units Value


    Shore A 92
    Hardness ASTM D2240 Shore D 48
    Specific Gravity ASTM D792 g/cm3 1.21
    Mechanical
    Tensile Stress ASTM D412 kgf/cm2
    At 100% elongation 95
    At 300% elongation 190
    Tensile Strength ASTM D412 kgf/cm2 500
    Ultimate Elongation ASTM D412 % 650
    Tear Resistance (Die C) ASTM D624 kgf/cm 140
    Abrasion Loss ISO 4649 mm3 30
    Compression Set ASTM D395
    At 23°C X 22hr % 15
    At 70°C X 22hr % 40
    Mold Shrinkage ASTM D955 m/m 0.009
    Thermal 30
    Vicat Softening Temperature ASTM D1525 °C 110
    *Test samples were annealed at 100°C and 24 hours at room temperature before testing.
    ** These are typical values and should not be used for specifications.

    June 4, 2007
    The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for Lubrizol Advanced Materials, Inc.
    particular applications or the results to be obtained. The information is based on laboratory work with small-scale equipment and does not necessarily indicate end
    product performance. Because of the variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees 9911 Brecksville Road
    are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are the responsibility of the user. Lubrizol
    Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability of any use or handling of any material beyond Lubrizol Advanced
    Cleveland, OH 44141-3247
    Materials, Inc.'s direct control. The SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 888-234-2436
    OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission, recommendation, nor as an
    inducement to practice any patented invention without permission of the patent owner. www.estane.com
    © 2007 The Lubrizol Corporation
    Estane® Skythane™ S190A TPU
    Issue date: 01/09
    Issue nr: 1/1
    Page 2

    Injection Molding Guide

    Test Machine
    1. Manufacturer: Engel (Model: ES240/75P)
    2.Clamping Force: 75 ton
    3. Screw Diameter: 35 mm
    4.Screw Stroke: 160 mm
    5.Lubrizol Mold No.: M-34
    6. Cavity Dimension: 125*125*2.0 mm

    Drying Conditions
    Drying Conditions
    Recommend 1 70~80°C for 4~5 hours by dehumidifying dryer

    Injection Conditions
    Barrel Temperature Mold Temperature
    Feeding Zone 185~195
    Metering Zone 185~200 10-40
    Nozzle 190~205
    Injection Conditions (I) Injection Conditions (II)
    Injection Pressure 1200~2000 Back Pressure (psi) 30-80
    (psi) Screw Speed (rpm) 180-220
    Injection Speed Slow
    Hold Pressure (psi) 1200-1800 Cycle Time(s) 25-35
    Injection Time(s) 12 -18

    You might also like