File: /home/sukhdev/hp-data/Downloads/smb.

conf Page 1 of 8

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name

workgroup = AVPCo

# server string is the equivalent of the NT Description field

server string = "AVP & Co Samba Server"

# This option is important for security. It allows you to restrict

# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1.

# if you want to automatically load your printer list rather

# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
printing = lprng

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).

max log size = 0

# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user

# Use password server option only with security = server

# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for

# all combinations of upper and lower case.
; password level = 8
; username level = 8
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 2 of 8

# You may wish to use password encryption. Please read

# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd

# The following is needed to keep smbclient from spouting spurious errors

# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt

# The following are needed to allow password changing from Windows to

# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = no
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*

# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.

pam password change = yes

# Unix users can map to different SMB User names

; username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes

obey pam restrictions = yes

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces

# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
interfaces = 192.168.1.0/24 192.168.15.0/24

# Configure remote browse list synchronisation here

# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
local master = yes
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 3 of 8

# OS Level determines the precedence of this server in master browser

# elections. The default value should be reasonable
os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This

# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
domain master = yes

# Preferred Master causes Samba to force a local browser election on startup

# and gives it a slightly higher chance of winning the election
preferred master = yes

# Enable this if you want Samba to be a domain logon server for

# Windows95 workstations.
domain logons = yes

# if you enable domain logons then you may want a per-machine or

# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)

# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on

# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no

# Case Preservation can be handy - system default is _no_

# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions ==============================

[homes]
comment = Home Directories
browseable = no
writable = yes
valid users = %S
create mode = 0664
directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 4 of 8

; map to guest = bad user

# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /usr/local/samba/lib/netlogon
guest ok = yes
writable = no
share modes = no

# Un-comment the following to provide a specific roving profile share

# the default is to use the user's home directory
[Profiles]
path = /usr/local/samba/profiles
browseable = no
guest ok = yes

# NOTE: If you have a BSD-style print system there is no need to

# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = yes
public = yes
guest ok = yes
writeable = no
printable = yes
# Set public = yes to allow user 'guest account' to print
public = yes
guest ok = yes
writable = yes
printable = yes
print command = lpr -P %p -o raw %s -r
lpq command = lpstat -o %p
lprm command = cancel %p-$j

# This one is useful for people to share files

[tmp]
comment = Temporary file space
path = /dos_temp
read only = no
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[backups]
comment = Backups space
path = /backups
read only = no
public = no
browsable=yes
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[ws6]
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 5 of 8

comment = WordStar 6 space

path = /dos_prog/ws6
read only = no
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[foxpro]
comment = FoxPro space
path = /dos_prog/foxpro
read only = no
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[office97]
comment = MSOffice space
path = /office97
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[gjxdata]
comment = Grand Jurix 2000 Data CDs
path = /gjx
read only = no
writeable = yes
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[gjxnew]
comment = Grand Jurix 2000 Data DVD
path = /media/cdrecorder
read only = yes
writeable = no
public = yes
browsable=yes

[lom]
comment = Law Office Manager Data
path = /lawoffman
read only = no
writeable = yes
public = yes
browsable=yes
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 6 of 8

read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[lawoffice]
comment = Lawoffice file space
path = /dos_prog/lawoffice
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[vppdata]
comment = VPP file space
path = /dos_prog/vppdata
public = yes
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[virus]
comment = virus
path = /tmp/viruses/
public = no
browsable=yes
read only = no
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[setups]
comment = program setups
path = /setups
read only = no
writable = yes
public = yes
browsable=yes
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes

[old]
comment = Archival file space
path = /dos_prog_old/
read only = yes
public = yes
browsable=yes
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 7 of 8

writable = yes

[pack]
comment = Notice file space
path = /dos_prog/pack
read only = no
public = yes
browsable=yes
create mask = 0777
force create mode = 0777
force group = +avp
directory mask = 0777
writable = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
File: /home/sukhdev/hp-data/Downloads/smb.conf Page 8 of 8

; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765