Scribd Logo
Upload

Welcome to Scribd!

  • 206 views

    Slings Shackles

    Uploaded by

    Dhana Shekar
    Using synthetic web slings and metal components like chains and shackles requires careful inspection and use to prevent damage or failure that could cause injury. Slings should be inspected for cuts, tears, abrasions, broken stitching, and other defects before each use. Chains require link-by-link examination and replacement if wear exceeds 15% of link diameter. Shackles must have straight pins and properly seated screws, and be replaced if pins or crowns are worn more than 10% from their original diameter. Careful attention to load weight, sharp edges, temperature, and proper handling techniques can help ensure safety when rigging with these components.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd

    Slings Shackles

    Uploaded by

    Dhana Shekar
    206 views5 pages
    Using synthetic web slings and metal components like chains and shackles requires careful inspection and use to prevent damage or failure that could cause injury. Slings should be inspected for cuts, tears, abrasions, broken stitching, and other defects before each use. Chains require link-by-link examination and replacement if wear exceeds 15% of link diameter. Shackles must have straight pins and properly seated screws, and be replaced if pins or crowns are worn more than 10% from their original diameter. Careful attention to load weight, sharp edges, temperature, and proper handling techniques can help ensure safety when rigging with these components.

    Original Description:

    slings

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Using synthetic web slings and metal components like chains and shackles requires careful inspection and use to prevent damage or failure that could cause injury. Slings should be inspected for cuts, tears, abrasions, broken stitching, and other defects before each use. Chains require link-by-link examination and replacement if wear exceeds 15% of link diameter. Shackles must have straight pins and properly seated screws, and be replaced if pins or crowns are worn more than 10% from their original diameter. Careful attention to load weight, sharp edges, temperature, and proper handling techniques can help ensure safety when rigging with these components.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    206 views5 pages

    Slings Shackles

    Uploaded by

    Dhana Shekar
    Using synthetic web slings and metal components like chains and shackles requires careful inspection and use to prevent damage or failure that could cause injury. Slings should be inspected for cuts, tears, abrasions, broken stitching, and other defects before each use. Chains require link-by-link examination and replacement if wear exceeds 15% of link diameter. Shackles must have straight pins and properly seated screws, and be replaced if pins or crowns are worn more than 10% from their original diameter. Careful attention to load weight, sharp edges, temperature, and proper handling techniques can help ensure safety when rigging with these components.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    You are on page 1of 5

    Using Slings and Shackles

    Synthetic Web Slings


    What should you know about using synthetic web slings?
    Synthetic web slings are easily cut and have poor abrasion resistance when compared with chain and wire rope slings. Nylon slings are damaged by acids, but resist caustics. Polyester slings are damaged by caustics but resist acids. Sunlight, moisture, and temperatures above 90C (194F) damage both nylon and polyester slings. Use slings made of the right material for the job. Check the manufacturers' slings for their code number and the rated capacity. Reference charts showing slings and hitch rated capacities are available from manufacturers. Inspect slings before using them. Keep an inspection record for each sling.

    What should you check when selecting slings?


    Refer to the manufacturer's reference chart for the capacity rating. Check a sling before using it. Determine the weight of the load. Prevent loading more than the rated capacity by considering sling angle. Protect webbing from sharp corners, protrusions, or abrasive surfaces. Ensure that the sling choking action is on the webbing, not the hardware. Have slings repaired by a sling manufacturer only. Do not drag slings across floors or other abrasive surfaces. Do not drop slings with metal fittings. Do not set loads down on top of slings. Do not pull slings from under loads when the load is resting on the sling. Do not weld anything hung from a sling. Do not lengthen or shorten slings by tying knots. Do not place stitch patterns (laps) on hooks, around sharp corners, or at choker bearing points. Increased stiffness of sling material. Acid or caustic burns. Melted, burned or weld spatter damage. Holes, tears, cuts, snags. Broken or worn stitching. Excessive abrasive wear. Knots in any part of the sling. Crushed webbing or embedded particles. Bleached sling colour.

    What should you avoid when using slings?

    What kinds of damage make a synthetic web-sling unusable?


    Chain Slings
    When should you inspect chain slings?

    Inspect chain slings every working day. Check for visible faults in links and hooks.

    How should you check chain slings during the periodical inspection? A competent person should inspect chain slings periodically, according to the manufacturer's recommendations. For record keeping purposes it is useful if each chain has a metal tag with an identification number and load limit information. Information about the chain length and other characteristics and a inspection schedule should recorded in a log book.

    Clean sling before inspection. Hang the chain up or stretch the chain out on a level floor in a well-lighted area. Remove all twists. Measure the sling length. Discard if a sling has been stretched.

    Make a link-by-link inspection and discard if:


    a. b. c. d. Wear exceeds 15% of a link diameter. Cut, nicked, cracked, gouged, burned, or corrosion pitted Twisted or bent. Stretched. Links tend to close up and get longer.

    Check master link, load pins and hooks for any of the above faults. Hooks should be removed from service if they have been opened more than 15% of the normal throat opening, measured at the narrowest point, or twisted more than 10 from the plane of the unbent hook. Manufacturers' reference charts show sling and hitch capacities. Record manufacturer, type, load limit and inspection dates How should you use chain slings safely? Find out load weight before lifting.

    Lower working a load limit if there may be severe impact. Balance the load to avoid overstress on one sling arm or the load slipping free. Pad sharp corners to prevent bending links. Replace broken safety latches. Reduce the load limit when using chain in temperatures above 425C (800F). Keep hands and fingers from between load and chain.

    Store chain sling arms on racks in assigned areas. What should you avoid using chain slings? Avoid impact loading: do not jerk the load when lifting or lowering the sling. This increases the actual stress on the sling.
    Do not drag chains. Do not splice a chain by inserting a bolt between two links. Do not shorten a chain with knots or by twisting. Do not force a hook over a link. Do not use homemade connections. Use only attachments designed for the chain. Do not heat treat or weld chain links: the lifting capacity will be reduced drastically.

    What are the types of shackles that you can choose?


    Anchor (bow type) and chain ("D" type) shackles are used with screw or round pins. When selecting the right shackle, refer to manufacturers' tables for the safe working loads of the shackles. Shackles are sized according to the diameter of the bow section rather than the pin size. Never use a shackle if the distance between the eyes is greater than listed in the manufacturers' tables.

    How should you inspect shackles?


    All pins must be straight and all screw pins must be completely seated. Cotter pins must be used with all round pin shackles. Replace shackles worn in the crown or the pin by more than 10% of the original diameter.

    What should you avoid when using shackles?


    Do not replace the shackle pin with a bolt. A load will bend the bolt. Do not allow a shackle to be pulled at an angle. The legs will open. Pack the pin with washers to center the shackle.

    Do not use screw pin shackles if the pin can roll and unscrew. If the load shifts, the sling will unscrew the shackle pin.

    Rigging Component Pre-Use Inspection Checklist


    Wire Rope Slings
    Identification #s of slings ________________ _________________________________

    No
    Broken wires Worn and abraded wires Fatigue fracture Reduction in rope diameter Stretch Corrosion Insufficient lubrication Damaged or inadequate splices Corroded, cracked, bent, worn and improperly applied connections Kinks Heat damage Electric arc

    Yes

    Other
    Amount _________ Amount _________ Amount _________

    Specify ____________ __________________ __________________

    Replace?

    Synthetic Web Slings, Round slings, Twinpath slings


    Identification #s of slings ________________ _________________________________

    No
    Worn or distorted fittings Cuts Holes Punches Tears Frayed material Broken stitching Acid, caustic or heat burns Replace?

    Yes

    Other

    If Yes, identify replacements ___________________ ___________________ ___________________

    Date: ___________________________________ Operator/User: _____________________________ Insufficiencies Reported to: _______________________________

    You might also like