MALM Zircon Mid Century Modern Wood Fireplace 30, 34 and 38 options MCM Wood burning Fireplace Zircon - 30 / Clay

This new design on a long lasting vintage style is back and made to order specifically for you made in the California to order by Malm. Made to order Black mid century modern Malm is 6 months out, porcelain painted are 7 months out from the date of order made specifically for you as well as any extra flue pipe (if you’re ceiling is higher than 8’ add pipe in 12” or 24” intervals” The High Sierra 30" wood burning fireplace is custom made to order for you MADE IN THE USA Includes matching 8" pipe to 8' ceiling height- if you have a taller ceiling than 8" then you should add MALM High Sierra Flue 7" 8" 9" for the 30" you will need a 7" ceiling box if it is new construction High Sierra Cone Fireplace 30" unit features: Available in colored porcelain or matte black Lift-off screen Two sections of 7x24" pipe One section of 7x30" pipe Wood grate not included 30" install here is the PDF manual for install and clearances for the Malm Zircon High Sierra High Sierra Cone Fireplace 34" unit features: Available in colored porcelain, brushed stainless steel, or matte black Lift-off screen Three sections of 8x24" pipe Eight bags Malm refractory Wood grate not included 34" install instructions & clearances PDF here High Sierra Cone Fireplace 38" unit features: Available in matte black only Lift-off screen Three sections of 9x24" pipe One 9" to 10" adapter Ten bags Malm refractory Wood grate not included 38" install instructions & clearances PDF here When you order you can choose matte black or the porcelain color you want Porcelain colors to choose from are Clay, Camel, Almond, Ash, Slate Gray, Terra Cotta, Forest Green, Blue, White, Black, Medium Blue, Platinum, Mint Green, Lemon Yellow, Turquoise, Baby Blue. Also available for this High Sierras fireplace available in Solid Copper, Nickle, stainless steel, or other specialty finishes. Contact us for more information. Call or email Brad at Smokey Mountain Fireplaces for pricing 541.678.3574 Limited 5 year warranty Made in America made custom to specific to each order Wall Clearance is 10" for the wood fireplace to non-combustibles Want to see installation instructions here is the PDF manual for install and clearances for the Malm Zircon High Sierra Malm Warranty does not cover if the fireplace is used outdoors or in outdoor exposure Below is the Forest Green Porcelain Malm Zircon High Sierra About MALM Fireplaces Malm began making fireplaces in 1960. Malm fireplaces are designed and manufactured in California's Sonoma County near the famed wine country. Modern or traditional designs are available, designed with solid craftsmanship and quality materials.Our freestanding fireplaces are perfect for today's busy lifestyles. Traditional masonry brick fireplaces take hours to heat the mass of bricks and waste much of the heat. Malm fireplaces heat up rapidly and radiate heat efficiently in all directions. Unlike traditional wood-burning fireplaces, our fireplaces allow you a clear view of your fire from any angle and are available in a range of designer colors.Malm's selection of architect-designed fireplaces is available in a variety of porcelain colors, brass, stainless, nickel, copper-plated, or matte black finish.Malm also designs and creates custom fireplaces. Designs include larger size models of the standard units to large units constructed with exotic metal finishes and glass. This appliance has been tested in accordance with National Safety Standards and has been certified by Lab Test for installation and operation as described in this manual. Please read all the instructions before beginning your installation. Check with your local building code agency to ensure compliance with local codes. In the absence of local codes the installation must comply with National Fuel Gas Code ANSI Z22.3.1. In Canada, current CAN/CGA-B149.1 and B149.2 installation codes. Return policy for MALM Fireplaces - No Returns on MALM High Sierra made to order fireplaces. questions please call or email [email protected] Brad at Smokey Mountain 541.678.3574 Once the order has been placed we start the process of manufacturing, it takes 6 months. if you need to cancel before it has been made, we can discuss the possibility of a refund with a 5% fee, only if we confirm the item has not started in manufacturing.