Download Latest Version apcupsd-3.14.14.tar.gz (1.8 MB)
Email in envelope

Get an email when there's a new version of Apcupsd UPS control software

Home / Contributions / WebMin
Name Modified Size InfoDownloads / Week
Parent folder
README 2014-03-08 2.3 kB
0
apcupsd0.812.wbm.gz 2014-03-08 12.8 kB
3 3 weekly downloads
Totals: 2 Items   15.1 kB 3 
README for the file  apcupsd-0.81-2.wbm.gz  AKA  apcupsd0.812.wbm.gz

This webmin package was written in 2001 by Eugene Borodin and posted
on http://www.bks.da.ru/webmin-modules/   It is licensed under the GPL in force in
2001.  It is also available from http://diego.caravana.to/software/webmin-apc-ups-modules-mirror/

The module requires apcupsd to be installed.  It has been tested under
Ubuntu 12.04 using an APC BACKUP ES700 and under FreeBSD 8.2 using an
APC SmartUPS 1500 and apcupsd-3.14.10 and Webmin apcupsd-3.14.10

From the original authors website:

"...This module administers the APC UPS monitoring package 

It is a wrapper around CGI programms included in apcupsd distribution.

See also the README file. 

This is FREE software, you can use it anyway..."

The Ubuntu distribution has instructions to install this under Ubuntu
here:

https://help.ubuntu.com/community/apcupsd

Under FreeBSD the instructions are:

cd /usr/ports/sysutils/apcupsd
make install
cd /usr/ports/sysutils/webmin
make install

add webmin_enable="YES"  to /etc/rc.conf

cd /usr/local/lib/webmin
./setup.sh

/usr/local/etc/rc.d/webmin start

Now log into webmin from your browser, usually https://localhost:10000 

Go to "Webmin->Webmin Configuration" from the left hand menu and click on "Webmin Modules" 

Click "Third party module from" and enter apcupsd0.812.wbm.gz then click on the install module button 

Click on "APC UPS Daemon" under "Other" from the left menu in Webmin. 

Adjust the package module configuration as follows:

Configurable options for APC UPS Daemon 


 Configuration file for apcupsd     /usr/local/etc/apcupsd/apcupsd.conf
 Time interval for update screens (in sec)     60 
 Path to multimon.cgi     /usr/local/etc/apcupsd/cgi/multimon.cgi
 Path to upsfstats.cgi     /usr/local/etc/apcupsd/cgi/upsfstats.cgi
 Path to upsstats.cgi      /usr/local/etc/apcupsd/cgi//upsstats.cgi
 Path to upsimage.cgi      /usr/local/etc/apcupsd/cgi/upsimage.cgi
 Start apcupsd command     /usr/local/etc/rc.d/apcupsd start
 Stop apcupsd command     /usr/local/etc/rc.d/apcupsd stop

Optionally:

•Go to the Webmin Configuration module.
•Click on the Trusted Referrers icon.
•Check the Trust links from unknown referrers box, and click Save.
Source: README, updated 2014-03-08