OpenOCD - Open On-Chip Debugger Code

# SPDX-License-Identifier: GPL-2.0-or-later
#

# Source the ESP common configuration file.
source [find target/esp_common.cfg]

# Target specific global variables
set _CHIPNAME 					"esp32s3"
set _CPUTAPID 					0x120034e5
set _ESP_ARCH 					"xtensa"
set _ONLYCPU					3
set _ESP_SMP_TARGET				1
set _ESP_SMP_BREAK 				1
set _ESP_EFUSE_MAC_ADDR_REG  	0x60007044

if { [info exists ESP32_S3_ONLYCPU] } {
	set _ONLYCPU $ESP32_S3_ONLYCPU
}

proc esp32s3_memprot_is_enabled { } {
	# SENSITIVE_CORE_X_IRAM0_DRAM0_DMA_SPLIT_LINE_CONSTRAIN_0_REG
	if { [get_mmr_bit 0x600C10C0 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_0_PIF_PMS_CONSTRAIN_0_REG
	if { [get_mmr_bit 0x600C1124 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_1_PIF_PMS_CONSTRAIN_0_REG
	if { [get_mmr_bit 0x600C11D0 0] != 0 } {
		return 1
	}
	# IRAM0, SENSITIVE_CORE_X_IRAM0_PMS_CONSTRAIN_0_REG
	if { [get_mmr_bit 0x600C10D8 0] != 0 } {
		return 1
	}
	# DRAM0, SENSITIVE_CORE_X_DRAM0_PMS_CONSTRAIN_0_REG
	if { [get_mmr_bit 0x600C10FC 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_0_IRAM0_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C10E4 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_1_IRAM0_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C10F0 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_0_DRAM0_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C1104 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_1_DRAM0_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C1114 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_0_PIF_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C119C 0] != 0 } {
		return 1
	}
	# SENSITIVE_CORE_1_PIF_PMS_MONITOR_0_REG
	if { [get_mmr_bit 0x600C1248 0] != 0 } {
		return 1
	}
	return 0
}

proc esp32s3_soc_reset { } {
	soft_reset_halt
}

create_esp_target $_ESP_ARCH

source [find target/xtensa-core-esp32s3.cfg]