Open Source ChromeOS Computational Fluid Dynamics (CFD) Software

OpenFOAM - The Open Source CFD Toolbox. OpenFOAM is a generic, programmable software tool for Computational Fluid Dynamics (CFD). For more information, see: - Main Website: https://openfoam.org - C++ Source Documentation: https://cpp.openfoam.org - Issue (Bug) Tracking: https://bugs.openfoam.org - User Guide: https://cfd.direct/openfoam/user-guide

cfMesh is an open-source library for volume mesh generation based on OpenFOAM. It implements various meshing workflows for volume mesh generation needed for CFD simulations with OpenFOAM. It is already a part of foam-extend, OpenFOAM for Windows, Caelus and OpenFOAM+ released by ESI. This repository is intended for contribution and collaborative development. If you have a new meshing algorithm or interested in contributing to cfMesh, do not hesitate to contact us. Please note that this code is not the same as CF-MESH+, which is a commercial product offered by Creative Fields Holding.

hftga2foam converts .tga height fields (as produced by povray or hf-lab) to blockmesh dictionaries (geometric mesh descriptions) for the OpenFOAM computational fluid dynamics package.

Computational Fluid Dynamics (CFD) solver aimed to solve multi-physics problems on unstructured grids (inviscid Euler, Navier-Stokes flows, Heat transfer). F90 based. MPI, cgns, Metis libraries used.

ENGRID is a mesh generation software with CFD applications in mind. It supports automatic prismatic boundary layer grids for Navier-Stokes simulations and has a Qt based GUI.

General CFD package, including grid generator and flow solver, CGNS compatible; V0.2.1 released 09/03/04.

OpenVLAB is an open source integrated framework for the numerical simulation of fluid flows (CFD) based on the resolution of Navier-Stokes equations. It is designed for analysis, design & optimization on airfoils, wings, wind-turbine, and much more..

OpenFlower is a free and open source CFD code (for Linux and Windows) mainly intended to solve the turbulent incompressible Navier-Stokes equations with a LES approach. It can deal with arbitrary complex 3D geometries with its finite volume approach.

The ADFC code is a computational fluid dynamics (CFD) C++ solver for incompressible viscous flow over 2D and 3D geometries. It uses finite element and the characteristic method on unstructured meshes to solve Navier-Stokes equations.

PRIN-3D (PRoto-code for Internal flows modeled by Navier-Stokes equations in 3-Dimensions) is a CFD code written in MATLAB, with turbulent and reactive capabilities.

RANSFOIL is a console program to calculate airflow field around an isolated airfoil in low-speed, subsonic, transonic or supersonic regime by numerically solving the Reynolds averaged Navier-Stokes (RANS) equations using mature computational fluid dynamics (CFD) method. As postprocess results, the aerodynamic parameters of the airfoil, e.g., lift coefficient and drag coefficient, can be integrated from the airflow distribution near wall boundary. In addition, the coupling between airflow and heat transfer and the effect of surface roughness on near wall flow are considered by this program, it can be used for engineering calculation of the friction drag and heat transfer coefficients on airfoil surface. RANSFOIL reads coordinates data from a 1D XYZ file which describes the grid points or control points on airfoil as only input, then outputs grid and solution files in 2D PLOT3D format to record grid coordinates and airflow data and a report file to show aerodynamic parameters.

CFD scientific software. Provides simulation of 3D CFD problem based on Quasi-Gas Dynamics approach with radiation processes token into account. Lots of spectral intervals are considered. Parallel MPI/OpenMP-based implementation is provided.

CFDtools is a set of libraries to manage data format for CFD (mesh/grid and flow data). It provides additional tools for development of simulations softwares.

Golp is an easy-to-use property class library for CFD&NHT programs. Golp is not, but more than a property database, it provides thermodynamics and thermophysical properties by generic interfaces. The classes can also be built as COM and python modules.

Hephaestus is a computational framework to be used for iterative solution programs, such as weather models or CFD applications. (Now in need of an administrator/developers).

Lata is a file format to store CFD results, with special care for huge datasets. This project provides tools for manipulate and convert the lata files. This project is part of the VisIt plugin reader. The Snorky3D sofware is presented in the following conference communication: Visualisation of CFD computations: millions of particles in real time with Snorky3D Visu 2012, september 2012, Paris, France http://visu2012.imag.fr/articles/mathieu.pdf