6" minimalist furniture legs, set of 4, walnut, white oak, mahogany, maple

Set of 4 minimalist furniture legs. These are designed for easy installation on a wide variety of furniture, vanities, cabinets, etc. Each leg installs with just two wood screws (provided). We make these from start to finish in our Greenwood, Indiana workshop using only high quality hardwoods. If you are using these on a long piece of furniture, such as a dresser, you will want to consider using one or two support legs in the middle. We now offer this leg in quantities of one to allow you to purchase the exact number of middle legs you need. You can find them in our separate listing here: https://www.etsy.com/listing/1824261267/center-support-furniture-leg-6-walnut Four wood options: Walnut, White Oak, Maple, Mahogany Choose from two finish options: *Unfinished- raw wood ready for your choice of stain or clear coat *Finished- 2 coats of clear polyurethane which brings out the natural color of the wood Dimensions: 6" tall, 6" wide, 1.5" thick You will receive 4 legs, 8 screws, and one t-20 torx bit Shipping is FREE to the U.S. We recommend installing these at a 45 degree angle from each corner of your base. This will increase rigidity while keeping the horizontal mounting pieces out of sight. If possible, flip your piece of furniture upside down. Choose your desired position for each leg, and use the screw holes as a guide to predrill holes in the bottom of your furniture. If you are using the screws we provide, a 3/32" drill bit will be ideal. Next, drive the screws, making sure the entire top of the leg seats firmly against your furniture. Floor protectors are available in our Etsy Shop: https://1600design.etsy.com/listing/1821159662/felt-floor-protectors-15-diameter-stick