DynamicPageList2
DynamicPageList2 is a Mediawiki extension developed for use on Wikinews (but not yet installed there), but it can be installed on any wiki. It allows wiki users to dynamically create lists of pages that are listed in a set of categories or namespaces using logical AND and OR.
DynamicPagelist2 vs. DynamicPageList
This is a hack of the original DynamicPageList extension featuring many Improvements (see below). Note that it's called DynamicPageList2 for distinction of DynamicPageList. You can use both extensions at the same time, because the new tag is DPL instead of DynamicPageList.
With DPL2 you have much more freedom when generating dynamic article lists by using AND and OR with categories. Moreover, there are much more display options to set.
Source and Installation
Latest version: 0.7.8.
First download the source from (2 possible locations):
- svn.wikimedia.org (for latest/development version)
- DynamicPageList2.php: Main file.
- DynamicPageList2.i18n.php: Required by
DynamicPageList2.php
, internationalization file used for all DPL messages.
- Alternative location: svnweb.tuxfamily.org (for latest or older releases)
- Development version: Browse - Tarball
- Older releases: Browse. RELX_Y_Z means version X.Y.Z. Use the Tarball link on the right to download.
To install it, put the file in your extensions/
directory, and add
require_once("extensions/DynamicPageList2.php");
to your LocalSettings.php
file.
For v0.7.0 and later, if you want to apply the 'category' parameter on the Uncategorized pages, you are required to execute this manual query on your MediaWiki database, replacing prefix
with your prefix if any:
CREATE VIEW prefix_dpl_clview AS SELECT IFNULL(cl_from, page_id) AS cl_from, IFNULL(cl_to, '') AS cl_to, cl_sortkey FROM prefix_page LEFT OUTER JOIN prefix_categorylinks ON page_id=cl_from
For MediaWiki 1.8.x, see DynamicPageList2#MediaWiki_Version.
If you are using this extension with IIS on a Windows box, make sure to give Read & Execute rights to the user IUSR_MACHINENAME (Anonymous Internet Guest Account) for the extensions directory and the DynamicPageList2.php file itself.
Authors
- Unendlich (EMail: fabian AT xover.htu.tuwien.ac.at).
- Dangerville
MediaWiki Version
- DPL2 v0.6 and later: MediaWiki 1.7.1 minimum for internationalization. (more info...).
- For MW 1.8.x, change the code (line 1024 in v0.7.7) from
return CategoryPage::columnList( $subaArticles, $subaArticles_start_char );
- to
return CategoryViewer::columnList( $subaArticles, $subaArticles_start_char );
- and on line 1027 from
return CategoryPage::shortList( $subaArticles, $subaArticles_start_char );
- to
return CategoryViewer::shortList( $subaArticles, $subaArticles_start_char );
- DPL2 v0.5.1: See test on MediaWiki 1.7 by gandm.
- DPL2 v0.5.x: Tested (mostly) successfully on Mediawiki 1.6.7.
Not compatible with Mediawiki 1.5.x. The extension uses (needs) more than two parameters and WikiMedia 1.5.x provides only two.
Bug report
Before reporting bugs, view old ones on the discussion page. For more recent ones, make an advanced search on MediaZilla. Select Product: MediaWiki extensions, and Component: DynamicPageList2.
Report new bugs on MediaZilla. Select Product: MediaWiki extensions, and Component: DynamicPageList2.
Note: if you have installed DPL2 on a public site, you are invited to add it to the list of sites using DPL2. Thank you.
Feature request
View old requests and request features on the discussion page.
Sites using DPL2
Please supply the list below with links to wikis where DynamicPageList2 is installed, and if possible, specific pages where we can see it in action. This is useful for users who do not have their own wiki installation to have a live demo of its features. We appreciate it.
Here are some links where DynamicPageList2 is being used (check the Special:Version page to get the version):
- DPLWiki: official site for demo/testing of the DPL (test there freely)
- OpenOffice.org Wiki
- WikiIndex: WikiIndex's DPL Test Page
- Princeton University QED (formerly TigerWeb): TigerWeb:Dynamic_Page_List
- OpenWetWare
- Nissan Tech Wiki
- Crewscut.com : used for creating dynamic lists on our frontpage
- D&D Wiki: Used to provide lists for the races, monsters, and other such categories.
- VoWi: DynamicPageList2 used on VoWi:Moderation to create lists of articles that need to be worked on.
Usage of DynamicPageList2
To use DPL, use the following XML-like syntax on your wiki page:
<DPL> ...parameters... </DPL>
The output of this would be something like: (depending on the outputmode you select)
You can nest DPL in a static list on your wiki page:
<ul> <li>Item1</li> <li>Item2 <DPL> ...parameters... </DPL> </li> </ul>
The list of pages being output, as well as the order and display mode of the list has to match the defined parameters.
The following lists parameters and their effects
category
Purpose:
Include pages in the union of given categories. You can specify more than one category with the pipe '|' as a separator, with the effect that the pages listed have to be at least in one of the categories (logical OR). If you specify the 'category=' parameter more than once, the pages listed have to match all these parameters (logical AND).
Syntax:
category=1st category name|2nd category name|3rd category name|...
Example 1:
<DPL> category=Africa|Europe category=Politics and conflicts </DPL>
This list will output pages that have [[Category:Africa]] OR [[Category:Europe]], AND [[Category:Politics and conflicts]] listed.
v0.7.0 - You can specify the set of Uncategorized pages as a normal category, with an empty string (e.g. 'category=
' for uncategorized pages only, 'category=|Animals
' or 'namespace=Animals|
' for the Uncategorized or the Animals category, 'category=Mammals||Insects
' for the Mammals category, uncategorized pages or the Insects category, etc.). See Source and Installation for the extra required installation steps.
v0.7.7 - If ordermethod=category,... and headingmode are enabled, you can restrict the categories you want as headings in the result by preceding the list of categories (specified with the category parameter) with a '+'. See the example below.
Example 2:
<DPL> category=+Africa|Europe category=Politics and conflicts ordermethod=category,sortkey headingmode=ordered </DPL>
This list will output pages that have [[Category:Africa]] OR [[Category:Europe]], AND [[Category:Politics and conflicts]] listed. The list will be ordered (OL tag) and organized in 2 main items/headings: the Africa one and the Europe one (Politics and conflicts will not be used as a heading). Under each item/heading, a sublist of pages ordered by their sortkey for the category used as heading.
Notes:
You may use Magic words like {{CURRENTMONTHNAME}}, {{CURRENTDAY}}, {{CURRENTYEAR}} etc in the category name, as long as they do not contain the character "|".
Related extension variables (more info): $wgDPL2MaxCategoryCount
, $wgDPL2AllowUnlimitedCategories
, $wgDPL2MinCategoryCount
.
notcategory
Purpose:
Much like the category parameter, but requires that every page listed not be in a particular category. Unlike in 'category' you cannot combine several categories using logical OR in this parameter.
Syntax:
notcategory=category name
Example:
<DPL> category=Africa notcategory=Zimbabwe notcategory=Kenya </DPL>
This list will output pages that have [[Category:Africa]] but do not have either [[Category:Zimbabwe]] or [[Category:Kenya]] listed.
Notes:
You may use Magic words like {{CURRENTMONTHNAME}}, {{CURRENTDAY}}, {{CURRENTYEAR}} etc in the category name.
Related extension variables (more info): $wgDPL2MaxCategoryCount
, $wgDPL2AllowUnlimitedCategories
, $wgDPL2MinCategoryCount
.
namespace
Purpose:
To restrict the articles in the list to only be in one of the given namespaces.
v0.7.7 - Magic words supported. See Help:Magic_words#Page_names_and_related_info and Help:Magic_words#Namespaces_and_URLs for relevant magic words.
Syntax:
namespace=1st namespace name|2nd namespace name|3rd namespace name|...
The namespace name may be anyone, assuming it represents a valid namespace in the system, including custom ones, BUT no pseudo-namespace such as Media, Special which have negative namespace ids. See Help:Namespace. The empty string is the main article namespace (e.g. 'namespace=
' for pages in Main ns only, 'namespace=|Help
' or 'namespace=Talk|
' for Main or Talk ns, 'namespace=User||Category
' for User, Main or Category, etc.).
Name spaces are case sensitive namespace=User_talk
will work, but namespace=User_Talk
will not.
- Namespace ids are no longer allowed as namespace arguments, because it caused a conflict between namespace given a number as name on one hand, and namespace with that same number as namespace id on the other hand. E.g. if you created a custom namespace with '1' as title (yes, it's possible),
namespace=1
would give you pages in '1' and not pages in namespace with id=1 (Talk). In that case, you could not get pages in the Talk ns anymore. Solution: use only ids or only names. Names are more user-friendly.
Example 1:
<DPL> category=Policy namespace=Wikinews|Discussion </DPL>
This list will output pages that are in the Wikinews or Discussion namespace and belong to [[Category:Policy]].
Example 2 (with magic word):
<DPL> category=Policy namespace={{NAMESPACE}} </DPL>
This list will output pages that are in the namespace the current page is in - whatever it is - and belong to [[Category:Policy]].
notnamespace
Purpose:
Much like the notcategory parameter, but for namespaces. Requires that every page listed not be in one of given namespaces.
v0.7.7 - Magic words supported. See Help:Magic_words#Page_names_and_related_info and Help:Magic_words#Namespaces_and_URLs for relevant magic words.
Syntax:
notnamespace=namespace name
Example 1:
<DPL> notnamespace=Wikinews notnamespace=Discussion </DPL>
This list will output pages that are NEITHER in the Wikinews NOR in the Discussion namespace.
Example 2 (with magic word):
<DPL> notnamespace=Wikinews notnamespace={{NAMESPACE}} </DPL>
This list will output pages that are NEITHER in the Wikinews NOR in the namespace the current page is in.
linksto
Introduced in v0.7.7.
Purpose:
Filters the articles which link to a certain page. Magic words are supported. See Help:Magic_words#Page_names_and_related_info for relevant magic words.
Syntax:
linksto=full page name
Example 1:
<DPL> category=Poets linksto=Dublin </DPL>
This list will output pages that are in category "Poets" and link to the page with title Dublin in the Main namespace.
Example 2 (with magic word):
<DPL> category=Poets linksto={{FULLPAGENAME}} </DPL>
This list will output pages that are in category "Poets" and link to the current page, whatever it is.
shownamespace
Purpose:
To restrict the appearance of the namespace name of a page before the page. For example, when this parameter is used, instead of Template:Stub the listing would simply be Stub.
Example:
shownamespace=false
If omitted, the default is true.
Example:
<DPL> category=Africa namespace=Talk shownamespace=false </DPL>
This list will output all Talk pages in [[Category:Africa]], listed without the Talk: prepended to page names.
mode
Purpose:
To control the output of the DPL.
Syntax:
mode=modename
modename can be one of:
- unordered — outputs an unordered list — HTML tag "ul" — (default)
- ordered — outputs an ordered list — HTML tag "ol"
- none — outputs a list using newlines and HTML tags "br" to separate each item
- inline — outputs a list using symbol defined by the inlinetext parameter to separate items. See inlinetext for more info.
- category — outputs resulting articles in a way category-pages are shown (you have to use
ordermethod=title|category,title|user,title
with this option!)
Example:
<DPL> category=Africa mode=ordered </DPL>
This list will output pages that have [[Category:Africa]] shown in an <ol>...</ol> list.
Related extension variable(s): $wgDPL2CategoryStyleListCutoff
.
inlinetext
This replaced 'inlinesymbol'.
Purpose:
To define the inline text used in mode=inline
.
Syntax:
inlinetext=wikitext
, with wikitext some wiki text, default is ' - '.
Extra whitespaces are stripped by DPL from the beginning and end of wikitext. If you want to show one or multiple spaces, use one or multiple '
', or use 'nowiki' tags like in '<nowiki> - </nowiki>' which has same effect as ' - '.
Example:
<DPL> category=Africa mode=inline inlinetext= • </DPL>
This list will output pages that have [[Category:Africa]] shown like Item1 • Item2 • Item3 • ...
headingmode
Purpose:
To control the output of the headings in a DPL with complex/multi-parameter ordermethods. (No effect with single-param ordermethods.) For ordermethod=method1,method2,...
, method1 is used for headings. E.g. headingmode
affects category headings in ordermethod=category,title
(2-param ordermethod).
Syntax:
headingmode=modename
modename can be one of:
- none — headings are not displayed, no heading — (default)
- unordered — outputs an unordered list — HTML tag "ul"
- ordered — outputs an ordered list — HTML tag "ol"
- definition — outputs a definition list — HTML tag "dl"
- H2 — outputs sections — HTML tags "H2"
- H3 — outputs sections — HTML tags "H3"
- H4 — outputs sections — HTML tags "H4"
Example:
<DPL> category=Africa|Europe ordermethod=category,title headingmode=definition mode=ordered </DPL>
This list will output pages that belong to one of the categories Africa, Europe in a list similar to this (HTML source), with Pages 1 and 2 in the Africa category, Page 1 in the Europe category as well (in fact, the titles are replaced with the appropriate links):
<dl> <dt>Africa</dt> <dd> <ol> <li>Page1</li> <li>Page2</li> </ol> </dd> <dt>Europe</dt> <dd> <ol> <li>Page1</li> </ol> </dd> </dl>
titlemaxlength
Purpose:
To limit the number of characters of the title to display. If the page title (this does not include the namespace or any other prefix before the title) is bigger than the titlemaxlength value, the title is truncated and ended by '...'.
Syntax:
Same syntax as the count parameter.
order
Purpose:
Controls the sort direction of the list.
Example:
order=orderdirection
orderdirection can be one of:
- descending — outputs list from most recent to least recent — (default)
- ascending — outputs list from least recent to most recent
Example:
<DPL> category=Africa order=ascending </DPL>
This list will output pages that have [[Category:Africa]] shown ordered from oldest to newest.
count
Purpose:
Controls the number of results that are shown.
Syntax:
count=n
, with n
a positive integer
A blank value (count=
) for unlimited. It is unlimited by default, depending on extension variables: $wgDPL2MaxResultCount
, $wgDPL2AllowUnlimitedResults
.
Example:
<DPL> category=Africa ordermethod=pagetouched count=2 </DPL>
This list will output the two pages most recently changed that have [[Category:Africa]].
ordermethod
Purpose:
Determines what criterium (resp. criteria) is (resp. are) used to order the list.
Syntax:
ordermethod=method1,method2,...
means ordered by method1 first, then by method2, etc. (like the ORDER clause in SQL)
methodN can be one of:
- categoryadd — outputs list based on most recent addition to the first category (requires to include one category and one only using 'category' parameter)
- firstedit — outputs list based on first edit to the pages (creation)
- lastedit — outputs list based on most recent edit to the pages
- pagetouched — outputs list based on 'page_touched' timestamp. Read comment on
page_touched
field in Page_table to see the difference from most recent edit by an author. - title — outputs list sorted by article (prefix +) title — (default)
Multi-param ordermethods (see also headingmode option):
- category,firstedit — outputs list sorted by category, then by first edit
- category,lastedit — outputs list sorted by category, then by last edit within a category
- category,pagetouched — outputs list sorted by category, then by pagetouched
- category,title — outputs list sorted by category, then by title
- Replaced by category,sortkey in v0.7.7 to customize the order with sortkeys from category tags, like in MediaWiki category pages.
- user,firstedit — outputs list sorted by user, then by firstedit by the user
- user,lastedit — outputs list sorted by user, then by lastedit by the user
Example:
<DPL> category=Africa ordermethod=lastedit </DPL>
This list will output pages that have [[Category:Africa]] showing most recently edited articles at the top.
debug
Purpose:
Sets debugging level.
Syntax:
debug=n
, where n is one of:
- 0 — silent mode, shows nothing
- 1 — quiet mode, shows (fatal) errors
- 2 — default mode, like 1 + shows warnings; — (default)
- 3 — verbose mode, like 2 + shows SQL query.
If you use debug param but not in first position in the DPL element, the new debug settings are not applied before all previous parameters have been parsed and checked. This will generate a warning for debug=2
and above.
Example:
<DPL> namespace=Media debug=0 namespace=Special </DPL>
This list will output the error for the first namespace: Media is not a valid namespace value (pseudo-namespace). Assuming you haven't changed the default debug value (2), you will also get a warning: debug=1
is not input first (before namespace=Media
). So it did not apply to namespace=Media
but only to what's after. Indeed, you won't get the warning for the second namespace (Special) since debug=0
changed debug settings to silent mode.
DPL debug messages are translatable in DynamicPageList2.i18n.php
. See also DynamicPageList2#Internationalization.
minoredits
Purpose:
Controls the inclusion or exlusion of minor edits in lists.
Requires: ordermethod=[...]firstedit|lastedit
Example:
minoredits=criteria
criteria can be one of:
- exclude — ignore minor edits when sorting lists
- include — includes minor edits to sort lists — (default)
Example:
<DPL> category=Africa ordermethod=lastedit minoredits=exclude </DPL>
This list will order pages tagged with [[Category:Africa]] by lastedit, but minor edits will be ignored in the ordering.
redirects
Purpose:
Controls the inclusion or exlusion of redirect pages in lists.
Example:
redirects=criteria
criteria can be one of:
- exclude — excludes redirect pages from lists — (default)
- include — allows redirect pages to appear in lists
- only — lists only redirect pages in lists
Example:
<DPL> category=Africa redirects=include </DPL>
This list will content pages and redirect pages tagged with [[Category:Africa]].
addfirstcategorydate
Requires to include one and one category only, with 'category' parameter.
Conflicts with other "add*date" (addeditdate, etc.) parameters to avoid confusion.
Purpose:
Shows the date/time the article got added to the first listed include category.
Example:
addfirstcategorydate=true
If omitted, the default is false.
Example:
<DPL> category=Africa addfirstcategorydate=true </DPL>
This list will output a list of pages belonging to [[Category:Africa]], prepending each result with the time and date (formatted according to your local mediawiki date display preferences or the user preferences if user logged in).
addeditdate
Requires ordermethod=[...,]firstedit or ordermethod=[...,]lastedit. ([...,] means complex ordermethods with extra param before firstedit|lastedit are allowed.)
Conflicts with other "add*date" (addpagetoucheddate, etc.) parameters.
Purpose:
If firstedit (resp. lastedit), 'addeditdate=true' shows the date of the first revision/creation (resp. last revision) of the page.
Example:
addeditdate=true
If omitted, the default is false.
Example:
<DPL> category=Africa ordermethod=lastedit addeditdate=true </DPL>
This list will output a list of pages belonging to [[Category:Africa]], prepending each result with the date of last revision (formatted according to your local mediawiki date display preferences or the user's preferences if logged in).
addpagecounter
Purpose:
Shows number of times the page has been viewed according to the definition of the 'page_counter' field on Page_table.
Example:
addpagecounter=true
If omitted, the default is false.
addpagetoucheddate
Requires ordermethod=[...,]pagetouched or ordermethod=[...,]title. ([...,] means complex ordermethods with extra param before are allowed.)
Purpose:
Shows date/time of last change to the page according to the definition of the 'page_touched' field on Page_table.
Example:
addpagetoucheddate=true
If omitted, the default is false.
Example:
<DPL> category=Africa ordermethod=pagetouched addpagetoucheddate=true </DPL>
This list will output a list of pages belonging to [[Category:Africa]], prepending each result with the date of last change (formatted according to your local mediawiki date display preferences or the user's preferences if logged in).
adduser
Requires ordermethod=[...,]firstedit or ordermethod=[...,]lastedit. ([...,] means complex ordermethods with extra param.)
Purpose:
If firstedit (resp. lastedit), 'adduser=true' shows the date of the the first revision/creation (resp. last revision) of the page.
Example:
adduser=true
If omitted, the default is false.
Example:
<DPL> category=Africa ordermethod=lastedit adduser=true </DPL>
This list will output a list of pages belonging to [[Category:Africa]], prepending each result with the author of the last revision.
listattr
Purpose:
Adds attributes to HTML list elements, depending on 'mode' (html element is 'ol' for ordered, 'ul' for unordered, 'div' for others). Can be used with pseudo 'mode=inline' where 'inlinetext' contains one or more <BR/>.
Not applicable to 'mode=category' or mode='inline' (with no
<BR/> in inlinetext).
Syntax:
listattr= attribute1="val1" attribute2="val2" ...
Examples:
Input
(HTML) Output
<DPL>
ordermethod=category,title
headingmode=ordered
mode=none
listattr= class="submenul"
itemattr= class="submenuli" style="font-style: italic;"
</DPL>
<ol>
<li> Cat1 (link)
<div class="submenul">
<span class="submenuli" style="font-style: italic;"> Page1_1 </span> <br/>
<span class="submenuli" style="font-style: italic;"> Page1_2 </span>
</div>
</li>
<li> Cat2 (link)
<div class="submenul">
<span class="submenuli" style="font-style: italic;"> Page2_1 </span> <br/>
<span class="submenuli" style="font-style: italic;"> Page2_2 </span>
</div>
</li>
</ol>
<DPL>
ordermethod=category,title
headingmode=ordered
mode=unordered
listattr= class="submenul"
itemattr= class="submenuli" style="font-weight: bold;"
</DPL>
<ol>
<li> Cat1 (link)
<ul class="submenul">
<li class="submenuli" style="font-weight: bold;"> Page1_1 </li>
<li class="submenuli" style="font-weight: bold;"> Page1_2 </li>
</ul>
</li>
<li> Cat2 (link)
<ul class="submenul">
<li class="submenuli" style="font-weight: bold;"> Page2_1 </li>
<li class="submenuli" style="font-weight: bold;"> Page2_2 </li>
</ul>
</li>
</ol>
itemattr
Purpose:
Adds attributes to HTML list items, depending on 'mode' (element is 'li' for ordered/unordered, 'span' for others).
Not applicable to 'mode=category'.
Syntax:
itemattr= attribute1="val1" attribute2="val2" ...
Example: see listitemattr.
hlistattr
Purpose:
Adds attributes to the HTML list element at the heading/top level, depending on 'headingmode' (HTML element would be 'ol' for ordered, 'ul' for unordered, 'dl' for definition, 'div' for others)
Not yet applicable to 'headingmode=none'.
Syntax:
hlistattr= attribute1="val1" attribute2="val2" ...
Example:
Input
(HTML) Output
<DPL>
ordermethod=category,pagetouched
headingmode=H2
mode=ordered
hlistattr= class="topmenul" id="dmenu"
</DPL>
<div class="topmenul" id="dynamicmenu">
<H2> Category 1 (link) </H2>
<ol>
<li>Page1_1</li>
<li>Page1_2</li>
</ol>
<H2> Category 2 (link) </H2>
<ol>
<li>Page2_1</li>
</ol>
</div>
See also hitemattr.
hitemattr
Purpose:
Adds attributes to HTML list items (headings) at the heading level, depending on 'headingmode' (HTML element would be 'li' for ordered/unordered, 'div' for others).
To be used with headingmode='unordered' or 'ordered'. (Not yet applicable for others.)
Syntax:
hitemattr= attribute1="val1" attribute2="val2" ...
Example:
Input
(HTML) Output
<DPL>
ordermethod=category,title
headingmode=unordered
mode=ordered
hlistattr= class="topmenul" id="dmenu"
hitemattr= class="topmenuli" style="color: red;"
</DPL>
<ul class="topmenul" id="dmenu">
<li class="topmenuli" style="color: red;"> Category 1 (link)
<ol>
<li>Page1_1</li>
<li>Page1_2</li>
</ol>
</li>
<li class="topmenuli" style="color: red;"> Category 2 (link)
<ol>
<li>Page2_1</li>
</ol>
</li>
</ul>
Server-Wide Configuration
Extension options
You can set the following global variables, preferably in your LocalSettings.php
(after including DynamicPageList2.php
) or in DynamicPageList2.php
directly, to configure and restrict the usage of the DPL extension server-wide.
$wgDPL2MaxCategoryCount
Maximum number of categories specified in a DPL with 'category' or 'notcategory' parameters = Maximum number of categories allowed in the SQL-query. To prevent too complex queries.
$wgDPL2AllowUnlimitedCategories
Allows unlimited categories in the query. ($wgDPLMaxCategoryCount
will be ignored)
$wgDPL2MinCategoryCount
Minimum number of categories specified in a DPL with 'category' or 'notcategory' parameters = Minimum number of categories needed in the SQL-query for setting limits. To prevent output of a gigantic list.
$wgDPL2MaxResultCount
Maximum number of results to allow.
$wgDPL2AllowUnlimitedResults
Allow unlimited results to be shown. ($wgDPLMaxResultCount will be ignored
)
$wgDPL2CategoryStyleListCutoff
Max length to format a list of articles chunked by letter as bullet list, if list bigger, columnar format user (same as cutoff arg for CategoryPage::formatList()
). Used by mode=category
.
$wgDPL2Options
Gives control on the extension parameters (see Usage of DynamicPageList2 for the list). The best way to get familiar with it is to look at its declaration in DynamicPageList2.php
(beginning). Use it at your own risk. Anyway, below are some usage examples:
- Change default parameter values:
$wgDPL2Options['param']['default']='val'
. Make sure val is a valid param value.
- Example:
$wgDPL2Options['shownamespace']['default']='false'
to change the shownamespace default value to 'false'.
- Restrict parameter options: if the parameter param has options option0, ... , optionN (according to the definition of
$wgDPL2Options
in DynamicPageList2.php
), $wgDPL2Options['param'] = array('option0',...,'optionn-1','optionn+1',...,'optionN')
will disable optionn for users (not allowed). If you disable an option currently defined as default parameter value, make sure you change the default value to another option as well (see previous item).
Internationalization
Since MediaWiki 1.7.1, extension messages are translatable (more info). To use this feature and translate the DPL messages into your favorite language, have a look at DynamicPageList2.i18n.php
. All you have to do is to create in this file a $wgDPL2Messages['lang']
array where 'lang' is your language code, and use $wgDPL2Messages['en']
as a model. Replace values with appropriate translations.
ToDo
See Talk:DynamicPageList2#General_ToDo_list.
Improvements and Changes
Release 0.7.8
Features:
- addpagecounter feature (adds # times page has been viewed)
- 'ordermethod=counter' feature: orders pages by #times page has been viewed
- Date output according to time zone offset in user's preferences
- Improved generation of links.
Bugfixes: