| 1. |
Zhang, Ting: The peridynamic Drucker‐Prager plastic model with fractional order derivative for the numerical simulation of tunnel excavation. -
Bognor Regis: Wiley Subscription Services, Inc, 2022. - 40 S.
In: International journal for numerical and analytical methods in geomechanics. (2022) S. 1620-1659, ISSN 0363-9061
 Zeitschriftenartikel |
|
|
| 2. |
Huang, Jian: Numerical study of rock-breaking mechanism in hard rock with full PDC bit model in compound impact drilling: Elsevier Ltd, 2023
In: Energy reports. (2023) S. 3896-3909, ISSN 2352-4847
Zeitschriftenartikel |
|
|
| 3. |
Jiang, Jia-Fei: Identification of material parameters for Drucker–Prager plasticity model for FRP confined circular concrete columns: Elsevier Ltd, 2012
In: International journal of solids and structures. (2012) S. 445-456, ISSN 0020-7683
Zeitschriftenartikel |
|
|
| 4. |
Rinaldi, Marianna: Additive layer manufacturing of poly (ether ether ketone) via FDM: Elsevier Ltd, 2018
In: Composites. Part B, Engineering. (2018) S. 162-172, ISSN 1359-8368
Zeitschriftenartikel |
|
|
| 5. |
Justo, J.: Characterization of 3D printed long fibre reinforced composites: Elsevier Ltd, 2018
In: Composite structures. (2018) S. 537-548, ISSN 0263-8223
Zeitschriftenartikel |
|
|
| 6. |
Gross, Bethany C: Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. -
United States, 2014
In: Analytical chemistry (Washington). (2014) S. 3240-3253, ISSN 0003-2700
Zeitschriftenartikel |
|
|
| 7. |
Zhang, X.H.: Study on the mechanical properties of hydrate-bearing silty clay: Elsevier Ltd, 2015
In: Marine and petroleum geology. (2015) S. 72-80, ISSN 0264-8172
Zeitschriftenartikel |
|
|
| 8. |
Lee, Jeongjoo: Slot‐Die and Roll‐to‐Roll Processed Single Junction Organic Photovoltaic Cells with the Highest Efficiency. -
Weinheim: Wiley Subscription Services, Inc, 2019. - 9 S.
In: Advanced energy materials. (2019) S. n/a, ISSN 1614-6832
Zeitschriftenartikel |
|
|
| 9. |
Ionescu, Ioan R.: Viscoplastic modeling of granular column collapse with pressure-dependent rheology: Elsevier B.V, 2015
In: Journal of non-Newtonian fluid mechanics. (2015) S. 1-18, ISSN 0377-0257
Zeitschriftenartikel |
|
|
| 10. |
Paździor, Katarzyna: A review of the existing and emerging technologies in the combination of AOPs and biological processes in industrial textile wastewater treatment: Elsevier B.V, 2019
In: Chemical engineering journal (Lausanne, Switzerland : 1996). (2019) S. 120597, ISSN 1385-8947
Zeitschriftenartikel |
|
|
| 11. |
Qinami, Aurel: Variational eigenerosion for rate‐dependent plasticity in concrete modeling at small strain. -
Hoboken, USA: John Wiley & Sons, Inc, 2020. - 22 S.
In: International journal for numerical methods in engineering. (2020) S. 1388-1409, ISSN 0029-5981
Zeitschriftenartikel |
|
|
| 12. |
Hu, Liwen: Modeling of Cloud-Based Digital Twins for Smart Manufacturing with MT Connect: Elsevier B.V, 2018
In: Procedia manufacturing. (2018) S. 1193-1203, ISSN 2351-9789
Zeitschriftenartikel |
|
|
| 13. |
Kotz, Frederik: Three-dimensional printing of transparent fused silica glass. -
England: Nature Publishing Group, 2017. - 3 S.
In: Nature (London). (2017) S. 337-339, ISSN 0028-0836
Zeitschriftenartikel |
|
|
| 14. |
Schumacher, Christian: Microstructures to control elasticity in 3D printing, 2015
In: ACM transactions on graphics. (2015) S. 1-13, ISSN 0730-0301
Zeitschriftenartikel |
|
|
| 15. |
Eckel, Zak C.: Additive manufacturing of polymer-derived ceramics. -
United States: American Association for the Advancement of Science, 2016
In: Science (American Association for the Advancement of Science). (2016) S. 58-62, ISSN 0036-8075
Zeitschriftenartikel |
|
|
| 16. |
Blok, L.G.: An investigation into 3D printing of fibre reinforced thermoplastic composites: Elsevier B.V, 2018
In: Additive manufacturing. (2018) S. 176-186, ISSN 2214-8604
Zeitschriftenartikel |
|
|
| 17. |
Parab, Niranjan D: Real time observation of binder jetting printing process using high-speed X-ray imaging. -
England: Nature Publishing Group, 2019
In: Scientific reports. (2019) S. 2499-2499, ISSN 2045-2322
Zeitschriftenartikel |
|
|
| 18. |
Romero-Ramirez, Francisco J.: Speeded up detection of squared fiducial markers: Elsevier B.V, 2018
In: Image and vision computing. (2018) S. 38-47, ISSN 0262-8856
Zeitschriftenartikel |
|
|
| 19. |
Heidari-Rarani, M.: Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites: Elsevier Ltd, 2019
In: Composites. Part B, Engineering. (2019) S. 107147, ISSN 1359-8368
Zeitschriftenartikel |
|
|
| 20. |
Zhang, Jingchuan: A review of the current progress and application of 3D printed concrete: Elsevier Ltd, 2019
In: Composites. Part A, Applied science and manufacturing. (2019) S. 105533, ISSN 1359-835X
Zeitschriftenartikel |
|
|
Suchhistorie (1 Recherche)
Jahr
