php.1.in

.TH PHP 1 "2013" "The PHP Group" "Scripting Language"
.SH NAME
php \- PHP Command Line Interface 'CLI'
.SH SYNOPSIS
.B php
[options] [
.B \-f\fP ]
.IR file
[[\-\-] 
.IR args.\|.\|. ]
.LP
.B php
[options] 
.B \-r 
.IR code
[[\-\-]
.IR args.\|.\|. ]
.LP
.B php
[options] [\-B 
.IR code ] 
.B \-R 
.IR code
[\-E 
.IR code ]
[[\-\-]
.IR args.\|.\|. ]
.LP
.B php
[options] [\-B 
.IR code ]
.B \-F 
.IR file
[\-E 
.IR code ] 
[[\-\-]
.IR args.\|.\|. ]
.LP
.B php
[options] \-\- [
.IR args.\|.\|. ]
.LP
\fBphp \fP[options] \fB\-a\fP
.LP
.B php
[options] \-S
.IR addr:port
[\-t
.IR docroot ]
.LP
.SH DESCRIPTION
\fBPHP\fP is a widely\-used general\-purpose scripting language that is especially suited for 
Web development and can be embedded into HTML. This is the command line interface
that enables you to do the following:
.P
You can parse and execute files by using parameter \-f followed by the name of the 
.IR file 
to be executed.
.LP
Using parameter \-r you can directly execute PHP 
.IR code 
simply as you would do inside a
.B \.php
file when using the 
.B eval() 
function.
.LP
It is also possible to process the standard input line by line using either
the parameter \-R or \-F. In this mode each separate input line causes the
.IR code 
specified by \-R or the 
.IR file
specified by \-F to be executed.
You can access the input line by \fB$argn\fP. While processing the input lines
.B $argi 
contains the number of the actual line being processed. Further more
the parameters \-B and \-E can be used to execute 
.IR code
(see \-r) before and
after all input lines have been processed respectively. Notice that the
input is read from
.B STDIN
and therefore reading from 
.B STDIN 
explicitly changes the next input line or skips input lines.
.LP
PHP also contains an embedded web server for application development purpose. By using the \-S option where
.B addr:port
point to a local address and port PHP will listen to HTTP requests on that address and port and serve files from the current working directory or the
.B docroot
passed by the \-t option.
.LP
If none of \-r \-f \-B \-R \-F \-E or \-S is present but a single parameter is given 
then this parameter is taken as the filename to parse and execute (same as 
with \-f). If no parameter is present then the standard input is read and 
executed.
.SH OPTIONS
.TP 15
.PD 0
.B \-\-interactive
.TP
.PD 1
.B \-a
Run PHP interactively. This lets you enter snippets of PHP code that directly
get executed. When readline support is enabled you can edit the lines and also
have history support.
.TP
.PD 0
.B \-\-bindpath \fIaddress:port\fP|\fIport\fP
.TP
.PD 1
.B \-b \fIaddress:port\fP|\fIport\fP
Bind Path for external FASTCGI Server mode (CGI only).
.TP
.PD 0
.B \-\-no\-chdir
.TP
.PD 1
.B \-C
Do not chdir to the script's directory (CGI only).
.TP
.PD 0
.B \-\-no\-header
.TP
.PD 1
.B \-q
Quiet-mode. Suppress HTTP header output (CGI only).
.TP
.PD 0
.B \-\-timing \fIcount\fP
.TP
.PD 1
.B \-T \fIcount\fP
Measure execution time of script repeated count times (CGI only).
.TP
.PD 0
.B \-\-php\-ini \fIpath\fP|\fIfile\fP
.TP
.PD 1
.B \-c \fIpath\fP|\fIfile\fP
Look for 
.B php.ini 
file in the directory
.IR path
or use the specified
.IR file
.TP
.PD 0
.B \-\-no\-php\-ini
.TP
.PD 1
.B \-n
No 
.B php.ini 
file will be used
.TP
.PD 0
.B \-\-define \fIfoo\fP[=\fIbar\fP]
.TP
.PD 1
.B \-d \fIfoo\fP[=\fIbar\fP]
Define INI entry 
.IR foo 
with value
.IR bar
.TP
.B \-e
Generate extended information for debugger/profiler
.TP
.PD 0
.B \-\-file \fIfile\fP
.TP
.PD 1
.B \-f \fIfile\fP
Parse and execute 
.IR file
.TP
.PD 0
.B \-\-global \fIname\fP
.TP
.PD 1
.B \-g \fIname\fP
Make variable
.IR name
global in script.
.TP
.PD 0
.B \-\-help
.TP
.PD 1
.B \-h
This help
.TP
.PD 0
.B \-\-hide\-args
.TP
.PD 1
.B \-H
Hide script name (\fIfile\fP) and parameters (\fIargs\.\.\.\fP) from external 
tools. For example you may want to use this when a php script is started as 
a daemon and the command line contains sensitive data such as passwords.
.TP
.PD 0
.B \-\-info
.TP
.PD 1
.B \-i
PHP information and configuration
.TP
.PD 0
.B \-\-syntax\-check
.TP
.PD 1
.B \-l
Syntax check only (lint)
.TP
.PD 0
.B \-\-modules
.TP
.PD 1
.B \-m
Show compiled in modules
.TP
.PD 0
.B \-\-run \fIcode\fP
.TP
.PD 1
.B \-r \fIcode\fP
Run PHP 
.IR code
without using script tags
.B '<?..?>'
.TP
.PD 0
.B \-\-process\-begin \fIcode\fP
.TP
.PD 1
.B \-B \fIcode\fP
Run PHP 
.IR code
before processing input lines
.TP
.PD 0
.B \-\-process\-code \fIcode\fP
.TP
.PD 1
.B \-R \fIcode\fP
Run PHP 
.IR code
for every input line
.TP
.PD 0
.B \-\-process\-file \fIfile\fP
.TP
.PD 1
.B \-F \fIfile\fP
Parse and execute 
.IR file
for every input line
.TP
.PD 0
.B \-\-process\-end \fIcode\fP
.TP
.PD 1
.B \-E \fIcode\fP
Run PHP 
.IR code
after processing all input lines
.TP
.PD 0
.B \-\-syntax\-highlight
.TP
.PD 1
.B \-s
Output HTML syntax highlighted source
.TP
.PD 0
.B \-\-server \fIaddr:port\fP
.TP
.PD 1
.B \-S \fIaddr:port\fP
Start embedded Webserver on the given local address and port
.TP
.PD 0
.B \-\-docroot \fIdocroot\fP
.TP
.PD 1
.B \-t \fIdocroot\fP
Specify the document root to be used by the embedded web server
.TP
.PD 0
.B \-\-version
.TP
.PD 1
.B \-v
Version number
.TP
.PD 0
.B \-\-stripped
.TP
.PD 1
.B \-w
Output source with stripped comments and whitespace
.TP
.PD 0
.B \-\-zend\-extension \fIfile\fP
.TP
.PD 1
.B \-z \fIfile\fP
Load Zend extension 
.IR file
.TP
.IR args.\|.\|.
Arguments passed to script. Use 
.B '\-\-'
.IR args
when first argument starts with 
.B '\-'
or script is read from stdin
.TP
.PD 0
.B \-\-rfunction
.IR name
.TP
.PD 1
.B \-\-rf
.IR name
Shows information about function
.B name
.TP
.PD 0
.B \-\-rclass
.IR name
.TP
.PD 1
.B \-\-rc
.IR name
Shows information about class
.B name
.TP
.PD 0
.B \-\-rextension
.IR name
.TP
.PD 1
.B \-\-re
.IR name
Shows information about extension
.B name
.TP
.PD 0
.B \-\-rzendextension
.IR name
.TP
.PD 1
.B \-\-rz
.IR name
Shows information about Zend extension
.B name
.TP
.PD 0
.B \-\-rextinfo
.IR name
.TP
.PD 1
.B \-\-ri
.IR name
Shows configuration for extension
.B name
.TP
.B \-\-ini
Show configuration file names
.SH FILES
.TP 15
.B php\-cli.ini
The configuration file for the CLI version of PHP.
.TP
.B php.ini
The standard configuration file will only be used when 
.B php\-cli.ini
cannot be found.
.SH EXAMPLES
.TP 5
\fIphp \-r 'echo "Hello World\\n";'\fP
This command simply writes the text "Hello World" to standard out.
.TP
\fIphp \-r 'print_r(gd_info());'\fP
This shows the configuration of your gd extension. You can use this
to easily check which image formats you can use. If you have any
dynamic modules you may want to use the same ini file that php uses
when executed from your webserver. There are more extensions which
have such a function. For dba use:
.RS
\fIphp \-r 'print_r(dba_handlers(1));'\fP
.RE
.TP
\fIphp \-R 'echo strip_tags($argn)."\\n";'\fP
This PHP command strips off the HTML tags line by line and outputs the 
result. To see how it works you can first look at the following PHP command
\'\fIphp \-d html_errors=1 \-i\fP\' which uses PHP to output HTML formatted
configuration information. If you then combine those two 
\'\fIphp \.\.\.|php \.\.\.\fP\' you'll see what happens.
.TP
\fIphp \-E 'echo "Lines: $argi\\n";'\fP
Using this PHP command you can count the lines being input.
.TP
\fIphp \-R '@$l+=count(file($argn));' \-E 'echo "Lines:$l\\n";'\fP
In this example PHP expects each input line being a file. It counts all lines 
of the files specified by each input line and shows the summarized result. 
You may combine this with tools like find and change the php scriptlet.
.TP
\fIphp \-R 'echo "$argn\\n"; fgets(STDIN);'\fP
Since you have access to STDIN from within \-B \-R \-F and \-E you can skip 
certain input lines with your code. But note that in such cases $argi only 
counts the lines being processed by php itself. Having read this you will 
guess what the above program does: skipping every second input line.
.SH TIPS
You can use a shebang line to automatically invoke php
from scripts. Only the CLI version of PHP will ignore
such a first line as shown below:
.P
.PD 0
.RS
#!/bin/php
.P
<?php
.P
 // your script
.P
?>
.RE
.PD 1
.P
.SH SEE ALSO
For a more or less complete description of PHP look here:
.PD 0
.P
.B http://www.php.net/manual/
.PD 1
.P
.SH BUGS
You can view the list of known bugs or report any new bug you
found at:
.PD 0
.P
.B http://bugs.php.net
.PD 1
.SH AUTHORS
The PHP Group: Thies C. Arntzen, Stig Bakken, Andi Gutmans, Rasmus Lerdorf, Sam Ruby, Sascha Schumann, Zeev Suraski, Jim Winstead, Andrei Zmievski.
.P
Additional work for the CLI sapi was done by Edin Kadribasic, Marcus Boerger and Johannes Schlueter.
.P
A List of active developers can be found here:
.PD 0
.P
.B http://www.php.net/credits.php
.PD 1
.P
And last but not least PHP was developed with the help of a huge amount of 
contributors all around the world.
.SH VERSION INFORMATION
This manpage describes \fBphp\fP, version @PHP_VERSION@.
.SH COPYRIGHT
Copyright \(co 1997\-2013 The PHP Group
.LP
This source file is subject to version 3.01 of the PHP license,
that is bundled with this package in the file LICENSE, and is
available through the world-wide-web at the following url:
.PD 0
.P
.B http://www.php.net/license/3_01.txt
.PD 1
.P
If you did not receive a copy of the PHP license and are unable to
obtain it through the world-wide-web, please send a note to
.B license@php.net
so we can mail you a copy immediately.