| Age | Commit message (Collapse) | Author |
|---|
|
Both pg_get_process_memory_contexts() and pg_backend_memory_contexts
have 1-based levels, whereas pg_log_backend_memory_contexts() was using
0-based levels. Align these.
This results in slightly saner behavior from MemoryContextStatsDetail()
in regards to the max_level. Previously it would stop at 1 level before
the maximum requested level rather than at that level.
Reported-by: Atsushi Torikoshi <[email protected]>
Author: Atsushi Torikoshi <[email protected]>
Author: David Rowley <[email protected]
Reviewed-by: Melih Mutlu <[email protected]>
Reviewed-by: Rahila Syed <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
The "children" list won't be used until "got_children" has been set
true, but older compilers don't get that; about half a dozen
buildfarm animals are warning about this. Issue added by 11ff192b5.
While here, improve slightly-shaky grammar in comment.
Discussion: https://postgr.es/m/[email protected]
|
|
Oversight in commit 40b9c2701, per buildfarm member mamba.
|
|
This gets rid of repetitive get_typlen calls in postquel_sub_params,
which show up as costing a few percent of the runtime in simple test
cases (more with more parameters).
In combination with the preceding patches, this gets us most of the
way back down to the amount of per-call overhead that functions.c
had before commit 0dca5d68d. There are some more things that could
be done, but this seems like an okay place to stop for v18.
|
|
At this point, the only data structures we allocate directly in
fcontext are the SQLFunctionCache struct itself, the ParamListInfo
struct, and the execution_state array, all of which are small and
perfectly capable of being re-used across executions of the same
FmgrInfo. Hence, let's give them the same lifespan as the FmgrInfo.
This step gets rid of the separate SQLFunctionLink struct and makes
fn_extra point to SQLFunctionCache again. We also get rid of the
separate fcontext memory context and allocate these items directly
in fn_mcxt.
For notational simplicity, SQLFunctionCache still has an fcontext
field, but it's just a copy of fn_mcxt.
The motivation for this is to allow these structures to live as
long as the FmgrInfo and be re-used across calls, restoring the
original design without its propensity for memory leaks. This
gets rid of some per-call overhead that we added in 0dca5d68d.
We also make an effort to re-use the JunkFilter and result slot.
Those might need to change if the function definition changes,
so we compromise by rebuilding them if the cached plan changes.
This also moves the tuplestore into fn_mcxt so that it can be
re-used across calls, again undoing a change made in 0dca5d68d.
|
|
Put the JunkFilter and its result slot (and thence also
some subsidiary data such as the result tupledesc) into a
separate subcontext "jfcontext". This doesn't accomplish
a lot at this point, because we make a new JunkFilter each
time through the SQL function. However, the plan is to make
the fcontext long-lived, and that raises the possibility
that we'll need a new JunkFilter because the plan for the
result-generating query changes. A separate context makes
it easy to free the obsoleted data when that happens.
Also, instead of always running the sub-executor in fcontext,
make a separate context for it if we're doing lazy eval of
a SRF, and otherwise just run it inside CurrentMemoryContext.
|
|
Previously, much of this code ran with CurrentMemoryContext set
to be the function's fcontext, so that we tended to leak a lot of
stuff there. Commit 0dca5d68d dealt with that by releasing the
fcontext at the completion of each SQL function call, but we'd
like to go back to the previous approach of allowing the fcontext
to be query-lifespan. To control the leakage problem, rearrange
the code so that we mostly run in the memory context that fmgr_sql
is called in (which we expect to be short-lived). Notably, this
means that parsing/planning is all done in the short-lived context
and doesn't leak cruft into fcontext.
This patch also fixes the allocation of execution_state records
so that we don't leak them across executions. I set that up
with a re-usable array that contains at least as many
execution_state structs as we need for the current querytree.
The chain structure is still there, but it's not really doing
much for us, and maybe somebody will be motivated to get rid
of it. I'm not though.
This incidentally also moves the call of BlessTupleDesc to be
with the code that creates the JunkFilter. That doesn't make
much difference now, but a later patch will reduce the number
of times the JunkFilter gets made, and we needn't bless the
results any more often than that.
We still leak a fair amount in fcontext, particularly when
executing utility statements, but that's material for a
separate patch step; the point here is only to get rid of
unintentional allocations in fcontext.
|
|
Late in the development of commit 0dca5d68d, I added a step to copy
the result tlist we extract from the cached final query, because
I was afraid that that might not last as long as the JunkFilter that
we're passing it off to. However, that turns out to cost a noticeable
number of cycles, and it's really quite unnecessary because the
JunkFilter will not examine that tlist after it's been created.
(ExecFindJunkAttribute would use it, but we don't use that function
on this JunkFilter.) Hence, remove the copy step. For safety,
reset the might-become-dangling jf_targetList pointer to NIL.
In passing, remove DR_sqlfunction.cxt, which we don't use anymore;
it's confusing because it's not entirely clear which context it
ought to point at.
|
|
Commit 0bada39c83a150079567a6e97b1a25a198f30ea3 fixed a bug of this kind,
which existed in all branches for six days before detection. While the
probability of reaching the trouble was low, the disruption was extreme. No
new backends could start, and service restoration needed an immediate
shutdown. Hence, add this to catch the next bug like it.
The new check in RelationIdGetRelation() suffices to make autovacuum detect
the bug in commit 243e9b40f1b2dd09d6e5bf91ebf6e822a2cd3704 that led to commit
0bada39. This also checks in a number of similar places. It replaces each
Assert(IsTransactionState()) that pertained to a conditional catalog read.
No back-patch for now, but a back-patch of commit 243e9b4 should back-patch
this, too. A back-patch could omit the src/test/regress changes, since back
branches won't gain new index columns.
Reported-by: Alexander Lakhin <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
The end callback for ZStandard compression frees the private_data
but didn't set the pointer to NULL after freeing. This is not a
bug as the code is right now, since nothing is dereferencing the
pointer upon returning from the callback but it is good practice
to do.
Author: Alexander Kuznetsov <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Ashutosh Bapat <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
In pg_dump and pg_restore, _allocAH() calls _discoverArchiveFormat() to
determine the archive format when the input format is unknown one.
If the input or discovered format is unrecognized, it reports an error
including the archive format number.
If discovered format is unrecognized, its number should be shown in
the error message. But previously the error message mistakenly showed
the originally requested format number (i.e., unknown one) instead of
the discovered one, due to referencing the wrong variable in the error
message.
This commit corrects the issue by using the appropriate variable in
the error message.
This fix has no practical impact since _discoverArchiveFormat() never
returns an unrecognized format and that error mesasge is actually
never output. Therefore, while the issue exists in back branches,
it's not worth the trouble and buildfarm cycles to back-patch.
So this fix is applied only to the master branch.
Author: Mahendra Singh Thalor <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Reviewed-by: Fujii Masao <[email protected]>
Discussion: https://postgr.es/m/CAKYtNAqu+N-Ab2Fq6wzNSOm_-0N-BMneanYNV1+6kFDXjva1Eg@mail.gmail.com
|
|
Reported-by: Noah Misch <[email protected]>
Reviewed-by: Noah Misch <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Noah Misch <[email protected]>
Reviewed-by: Noah Misch <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Use appendPQExpBufferStr when there are no parameters and
appendPQExpBufferChar when the string length is 1.
Author: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAApHDvoARMvPeXTTC0HnpARBHn-WgVstc8XFCyMGOzvgu_1HvQ@mail.gmail.com
|
|
estimate_multivariate_ndistinct() is coded to assume the caller handles
passing it a list of GroupVarInfos with unique 'var' fields over the
entire list. 6bb6a62f3 added code which didn't ensure this and that
could result in estimate_multivariate_ndistinct() erroring out with:
ERROR: corrupt MVNDistinct entry
This occurred because estimate_multivariate_ndistinct() first searches
for a set of stats that match to at least two of the given GroupVarInfos
and then later assumes that the MVNDistinctItem.items array of the
best matching stats will have an entry for those two columns. If the
GroupVarInfos List contained a duplicate entry then the same column could
be matched to twice and that could trick the code into thinking we have
>= 2 columns matched in cases where only a single distinct column has been
matched. This could result in a failure to find the correct
MVNDistinctItem in the stats as the array containing those never
contains an item for single columns.
Here we make it more clear that the function needs a distinct set of
GroupVarInfos and also tidy up a few other comments to make things a bit
easier to follow.
Author: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAApHDvocZCUhM9W9mJ39d6oQz7ePKoqFnao_347mvC-A7QatcQ@mail.gmail.com
|
|
Buildfarm member drongo complained because the definitions of these
functions used "const Oid foo" where the forward declarations just
had "Oid foo". (I'm a bit surprised that drongo seems to be the only
complainant.) I chose to fix this by removing the "consts" because
(a) I'm generally not a fan of using const that way, and (b) it was
a minority usage even within these two functions, let alone compared
to the rest of our code base.
Oversight in commit eec0040c4, so no need for back-patch.
|
|
We were unnecessarily acquiring AccessExclusiveLock on all child tables
when "ALTER TABLE ONLY sometab ADD PRIMARY KEY" was run on their parent
table, an oversight in commit 14e87ffa5c54. This caused deadlocks
during pg_restore of partitioned tables.
The reason to acquire the AEL was that we need to verify that child
tables have the involved columns already marked as not-null; but if the
parent table has an inheritable not-null constraint, then all children
must necessarily be in the correct state already, so we can skip the
check, which avoids acquiring the lock. Reorder the code so that it
works that way. This doesn't change things in the case where the
constraint doesn't exist, but that case is of lesser importance because
it doesn't occur during parallel pg_restore.
While at it, reword some errmsg() and add errhint() to similar cases in
related but not adjacent code.
Diagnosed-by: Tom Lane <[email protected]>
Reviewed-by: Tender Wang <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Add macros from autoheader which were accidentally omitted in
commit 65c298f61fc. There is no function change by this as no
code is currently using the missing macro.
Author: Daniel Gustafsson <[email protected]>
Reviewed-by: Jacob Champion <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
We'd try to drop the partitions of a partitioned index separately,
which is disallowed by the backend, leading to an error during
restore. While the error is harmless, it causes problems if you
try to use --single-transaction mode.
Fortunately, there seems no need to do a DROP at all, since the
partition will go away silently when we drop either the parent index
or the partition's table. So just make the DROP conditional on not
being a partition.
Reported-by: jian he <[email protected]>
Author: jian he <[email protected]>
Reviewed-by: Pavel Stehule <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/CACJufxF0QSdkjFKF4di-JGWN6CSdQYEAhGPmQJJCdkSZtd=oLg@mail.gmail.com
Backpatch-through: 13
|
|
. remove unnecessary oid_string list stuff
. use pg_get_line_buf() instead of open-coding it
. cleaner parsing of map.dat lines
Reverts 2b69afbe50d add new list type simple_oid_string_list to fe-utils/simple_list
Author: Álvaro Herrera <[email protected]>
Author: Andrew Dunstan <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Memoize typically marks cache entries as complete after fully scanning
the inner side of a join. However, in the case of unique joins, we
skip to the next outer tuple as soon as the first matching inner tuple
is found, leaving no opportunity to scan the inner side to completion.
To work around that, we mark cache entries as complete after fetching
the first matching inner tuple in unique joins.
This approach is only safe when all of the join's restriction clauses
are parameterized; otherwise, there is no guarantee that reading just
one tuple from the inner side is sufficient.
Currently, we check for this by verifying that the number of clauses
in ppi_clauses is no less than the number of the join's restriction
clauses. However, this check isn't entirely reliable, as ppi_clauses
includes join clauses available from all outer rels, not just the
current outer rel. This means the check could pass even if a
restriction clause isn't parameterized, as long as another join
clause, which doesn't belong to the current join, is included in
ppi_clauses.
To fix this, we explicitly check whether each restriction clause of
the current join is present in ppi_clauses.
While we're here, remove the XXX comment from the modified code, as
it's not justified; in certain cases, it's not possible to move a join
clause to the inner side.
This is arguably a bugfix, but no backpatch given the lack of field
reports.
Author: Richard Guo <[email protected]>
Reviewed-by: wenhui qiu <[email protected]>
Reviewed-by: Andrei Lepikhov <[email protected]>
Discussion: https://postgr.es/m/CAMbWs4-8JPouj=wBDj4DhK-WO4+Xdx=A2jbjvvyyTBQneJ1=BQ@mail.gmail.com
|
|
If a GENERATED column is declared to have a domain data type where
the domain's constraints disallow null values, INSERT commands failed
because we built a targetlist that included coercing a null constant
to the domain's type. The failure occurred even when the generated
value would have been perfectly OK. This is adjacent to the issues
fixed in 0da39aa76, but we didn't notice for lack of testing a domain
with such a constraint.
We aren't going to use the result of the targetlist entry for the
generated column --- ExecComputeStoredGenerated will overwrite it.
So it's not really necessary that it have the exact datatype of
the generated column. This patch fixes the problem by changing
the targetlist entry to be a null Const of the domain's base type,
which should be sufficiently legal. (We do have to tweak
ExecCheckPlanOutput to accept the situation, though.)
This has been broken since we implemented generated columns.
However, this patch only applies easily as far back as v14, partly
because I (tgl) only carried 0da39aa76 back that far, but mostly
because v14 significantly refactored the handling of INSERT/UPDATE
targetlists. Given the lack of field complaints and the short
remaining support lifetime of v13, I judge the cost-benefit ratio
not good for devising a version that would work in v13.
Reported-by: jian he <[email protected]>
Author: jian he <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/CACJufxG59tip2+9h=rEv-ykOFjt0cbsPVchhi0RTij8bABBA0Q@mail.gmail.com
Backpatch-through: 14
|
|
The code comment for parse_oid accidentally used the wrong parameter
when referring to the location of the last backup. Also, while there,
improve sentence wording by removing a superfluous word.
Backpatch to v17 where pg_combinebackup was addedd
Author: Amul Sul <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Robert Haas <[email protected]>
Discussion: https://postgr.es/m/CAAJ_b95ecWgzcS4K3Dx0E_Yp-SLwK5JBasFgioKMSjhQLw9xvg@mail.gmail.com
Backpatch-through: 17
|
|
also related to commit 8dfd3129027
|
|
Mark the sslkeylogile option as "D" debug as this truly is a debug
option, and it will allow postgres_fdw et.al to filter it out as
well. Also update the display length to match that for an ssl key
as they are both filename based inputs.
Author: Daniel Gustafsson <[email protected]>
Reported-by: Jacob Champion <[email protected]>
Discussion: https://postgr.es/m/CAOYmi+=5GyBKpu7bU4D_xkAnYJTj=rMzGaUvHO99-DpNG_YKcw@mail.gmail.com
|
|
Alpine Linux's C library (musl) spells one error message differently.
Reported-by: Wolfgang Walther
|
|
Thinko in commit 39729ec01d2. Mea maxima culpa.
Per Mahendra Singh Thalor <[email protected]>
|
|
Commit 0f21db36d made an assumption that GIN triConsistentFns
would not modify their input entryRes[] arrays. But in fact,
the "shim" triConsistentFn that we use for opclasses that don't
supply their own did exactly that, potentially leading to wrong
answers from a GIN index search. Through bad luck, none of the
test cases that we have for such opclasses exposed the bug.
One response to this could be that the assumption of consistency check
functions not modifying entryRes[] arrays is a bad one, but it still
seems reasonable to me. Notably, shimTriConsistentFn is itself
assuming that with respect to the underlying boolean consistentFn,
so it's sure being self-centered in supposing that it gets to do so.
Fortunately, it's quite simple to fix shimTriConsistentFn to restore
the entry-time state of entryRes[], so let's do that instead.
This issue doesn't affect any core GIN opclasses, since they all
supply their own triConsistentFns. It does affect contrib modules
btree_gin, hstore, and intarray.
Along the way, I (tgl) noticed that shimTriConsistentFn failed to
pick up on a "recheck" flag returned by its first call to the boolean
consistentFn. This may be only a latent problem, since it would be
unlikely for a consistentFn to set recheck for the all-false case
and not any other cases. (Indeed, none of our contrib modules do
that.) Nonetheless, it's formally wrong.
Reported-by: Vinod Sridharan <[email protected]>
Author: Vinod Sridharan <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/CAFMdLD7XzsXfi1+DpTqTgrD8XU0i2C99KuF=5VHLWjx4C1pkcg@mail.gmail.com
Backpatch-through: 13
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 18 development.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
|
|
A backend using wal_sync_method set to "open_sync" or "open_datasync"
would fail the test checking the WAL sync data in pg_stat_io. These
modes guarantee that a sync is done when WAL is written to disk, and the
data checked by the test is not incremented in this case,
issue_xlog_fsync() doing nothing.
Oversight in commit a051e71e28a1.
Author: Sami Imseih <[email protected]>
Discussion: https://postgr.es/m/CAA5RZ0uxwg3xAi4nvdBMJ-zJQEeyg+RotuU+ebM2F6CKmnvaYA@mail.gmail.com
|
|
This fixes typos in docs and comments introduced during the v18
development cycle, to keep them from ending up in backbranches.
Author: Jacob Brazeal <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CA+COZaCgGua25f2hSrjrDLJcJJAHkwoKgTTqUy-wyL1=64JNjw@mail.gmail.com
|
|
added by commit 8dfd3129027
|
|
added by commit c1da7281060
|
|
added by commit 40e2e5e92b7
|
|
Discussion: https://www.postgresql.org/message-id/flat/25095db5-b595-4b85-9100-d358907c25b5%40eisentraut.org
|
|
synchronous_standby_names cannot be reloaded safely by backends, and the
checkpointer is in charge of updating a state in shared memory if the
GUC is enabled in WalSndCtl, to let the backends know if they should
wait or not for a given LSN. This provides a strict control on the
timing of the waiting queues if the GUC is enabled or disabled, then
reloaded. The checkpointer is also in charge of waking up the backends
that could be waiting for a LSN when the GUC is disabled.
This logic had a race condition at startup, where it would be possible
for backends to not wait for a LSN even if synchronous_standby_names is
enabled. This would cause visibility issues with transactions that we
should be waiting for but they were not. The problem lasts until the
checkpointer does its initial update of the shared memory state when it
loads synchronous_standby_names.
In order to take care of this problem, the shared memory state in
WalSndCtl is extended to detect if it has been initialized by the
checkpointer, and not only check if synchronous_standby_names is
defined. In WalSndCtlData, sync_standbys_defined is renamed to
sync_standbys_status, a bits8 able to know about two states:
- If the shared memory state has been initialized. This flag is set by
the checkpointer at startup once, and never removed.
- If synchronous_standby_names is known as defined in the shared memory
state. This is the same as the previous sync_standbys_defined in
WalSndCtl.
This method gives a way for backends to decide what they should do until
the shared memory area is initialized, and they now ultimately fall back
to a check on the GUC value in this case, which is the best thing that
can be done.
Fortunately, SyncRepUpdateSyncStandbysDefined() is called immediately by
the checkpointer when this process starts, so the window is very narrow.
It is possible to enlarge the problematic window by making the
checkpointer wait at the beginning of SyncRepUpdateSyncStandbysDefined()
with a hardcoded sleep for example, and doing so has showed that a 2PC
visibility test is indeed failing. On machines slow enough, this bug
would cause spurious failures.
In 17~, we have looked at the possibility of adding an injection point
to have a reproducible test, but as the problematic window happens at
early startup, we would need to invent a way to make an injection point
optionally persistent across restarts when attached, something that
would be fine for this case as it would involve the checkpointer. This
issue is quite old, and can be reproduced on all the stable branches.
Author: Melnikov Maksim <[email protected]>
Co-authored-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 13
|
|
Sami complained that there's a discrepancy between n_mod_since_analyze
and n_ins_since_vacuum, as the former only accounts for committed changes
and the latter tracks committed and aborted inserts. Nobody seemed
overly concerned that this would cause any concerning issues. The
repercussions, from what I can tell, are limited to causing an
autovacuum to trigger for inserts sooner than it otherwise might. For
typical ratios of commits to aborts, it's unlikely to ever be noticed.
Fixing things to make it so n_ins_since_vacuum only displays committed
inserts would require an additional field in PgStat_TableCounts, which
does not quite seem worthwhile at this stage. This commit just adds a
comment with some details to mention that we know about it, which will
hopefully prevent repeat discussions.
Reported-by: Sami Imseih <[email protected]>
Author: David Rowley <[email protected]>
Reviewed-by: Sami Imseih <[email protected]>
Discussion: https://postgr.es/m/CAApHDvpgV3a-R2EGmPOh0L-x3pHbZpM3y4dySWfy+UqUazwDQA@mail.gmail.com
|
|
Per Rainier Vilela
|
|
Similar to 8461424fd, here we adjust a few new locations which were not
using the most suitable appendStringInfo* function for the intended
purpose.
Author: David Rowley <[email protected]
Discussion: https://postgr.es/m/CAApHDvqJnNjueb=Eoj8K+8n0g7nj_AcPWSiCj5RNV4fDejAfqA@mail.gmail.com
|
|
The global variable backing the DSA area for Memory Context stats
reporting had a too generic name, rename to be more descriptive.
Independently reported by Peter and Laurenz.
Author: Daniel Gustafsson <[email protected]>
Reported-by: Peter Eisentraut <[email protected]>
Reported-by: Laurenz Albe <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/[email protected]
|
|
Oversight in 1495eff7bdb
Author: Ranier Vilela <[email protected]>
|
|
By inspection, ip_addrsize() can't return a negative result.
(If it could, we'd have way bigger problems elsewhere.)
So delete useless check in network_send(). Most C compilers
are probably perfectly capable of removing this code by
themselves, but it's confusing/misleading.
Bug: #18889
Reported-by: Daniel Elishakov <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Instead of two separate (and different) implementations, refactor to use
a single common routine.
Along the way, remove use of a hardcoded file permissions constant in
favor of the common project setting for directory creation.
Author: Mahendra Singh Thalor <[email protected]>
Discussion: https://postgr.es/m/CAKYtNApihL8X1h7XO-zOjznc8Ca66Aevgvhc9zOTh6DBh2iaeA@mail.gmail.com
|
|
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
We observed performance regression primarily during frequent execution of
*publication DDL* statements that modify the published tables. The
regression is minor or nearly nonexistent for DDLs that do not affect the
published tables or occur infrequently, making this a worthwhile cost to
resolve a longstanding data loss issue.
An alternative approach considered was to take a strong lock on each
affected table during publication modification. However, this would only
address issues related to publication DDLs (but not the ALTER TYPE ...)
and require locking every relation in the database for publications
created as FOR ALL TABLES, which is impractical.
The bug exists in all supported branches, but we are backpatching till 14.
The fix for 13 requires somewhat bigger changes than this fix, so the fix
for that branch is still under discussion.
Reported-by: hubert depesz lubaczewski <[email protected]>
Reported-by: Tomas Vondra <[email protected]>
Author: Shlok Kyal <[email protected]>
Author: Hayato Kuroda <[email protected]>
Reviewed-by: Zhijie Hou <[email protected]>
Reviewed-by: Masahiko Sawada <[email protected]>
Reviewed-by: Amit Kapila <[email protected]>
Tested-by: Benoit Lobréau <[email protected]>
Backpatch-through: 14
Discussion: https://postgr.es/m/[email protected]
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
|
|
for commits 8f427187db7, 6ee3b91bad2
|
|
d69d45a5a changed how em_is_child members are stored in
EquivalenceClasses. Children are no longer stored in the ec_members
list. optimizer/README mentioned that most operations "should ignore
child members", but that felt a little untrue now since child members
are now stored in a separate place, they simply won't be found by the
normal means of looking (a foreach loop over ec_members), and if you don't
find them, there's technically no need to "ignore" them.
Here we tweak the wording slightly to reflect the new storage location
for child members.
Reported-by: Amit Langote <[email protected]>
Author: Amit Langote <[email protected]>
Author: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CA+HiwqE8v=EuAP_3F_A2xn8zWx+nG_etW_Fe_DvKO-Fkx=+DdQ@mail.gmail.com
|
|
Author: Peter Smith <[email protected]>
Reviewed-by: Amit Kapila <[email protected]>
Discussion: https://postgr.es/m/CAHut+PsmSCQ-ENSDQ0YOUcsgzT=GG-E9jyXBvxd51A_dMXH5XA@mail.gmail.com
|
|
This moves/renames some of the functions defined in pg_numa.c:
* pg_numa_get_pagesize() is renamed to pg_get_shmem_pagesize(), and
moved to src/backend/storage/ipc/shmem.c. The new name better reflects
that the page size is not related to NUMA, and it's specifically about
the page size used for the main shared memory segment.
* move pg_numa_available() to src/backend/storage/ipc/shmem.c, i.e. into
the backend (which more appropriate for functions callable from SQL).
While at it, improve the comment to explain what page size it returns.
* remove unnecessary includes from src/port/pg_numa.c, adding
unnecessary dependencies (src/port should be suitable for frontent).
These were either leftovers or unnecessary thanks to the other changes
in this commit.
This eliminates unnecessary dependencies on backend symbols, which we
don't want in src/port.
Reported-by: Kirill Reshke <[email protected]>
Reviewed-by: Andres Freund <[email protected]>
https://postgr.es/m/CALdSSPi5fj0a7UG7Fmw2cUD1uWuckU_e8dJ+6x-bJEokcSXzqA@mail.gmail.com
|
|
Oversight in commit aa01051418.
Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/4055696.1744134682%40sss.pgh.pa.us
|
|
With debug_discard_caches = 1, the runtime of this test script
increased by about a factor of 10 after commit 0dca5d68d. That's
causing some of our buildfarm animals to fail with a timeout.
The reason for the increased time is that now we are re-planning
some intentionally-non-inlineable SQL functions on every execution,
where the previous coding held onto the original plans throughout
the outer query. The previous behavior was arguably quite buggy,
so I don't think 0dca5d68d deserves blame here. But we would
like this test script to not take so long.
To fix, instead of forcing a "parallel safe" label via a
non-inlineable SQL function, apply it directly to the advisory-lock
functions by making internal-language aliases for them. A small
problem is that the advisory-lock functions return void but this
test would really like them to return integer 1. I cheated here by
declaring the aliases as returning "int". That's perhaps undue
familiarity with the implementation of PG_RETURN_VOID(), but that
hasn't changed in twenty years and is unlikely to do so in the next
twenty. That gets us an integer 0 result, and then an inline-able
wrapper to convert that to an integer 1 allows the rest of the script
to remain unchanged.
For me, this reduces the runtime with debug_discard_caches = 1
by about 100x, making the test comfortably faster than before
instead of slower.
Discussion: https://postgr.es/m/[email protected]
|
