| Age | Commit message (Collapse) | Author |
|---|
|
The code carelessly modified mtstate->ps.plan->targetlist,
which it's not supposed to do. Fortunately, there's not
really any need to do that because the planner already
set up a perfectly acceptable targetlist for the plan node.
We just need to remove the erroneous assignments and update some
relevant comments.
As it happens, the erroneous assignments caused the targetlist to
point to a different part of the source plan tree, so that there
isn't really a risk of the pointer becoming dangling after executor
termination. The only visible effect of this change we can find is
that EXPLAIN will show upper references to the ModifyTable's output
expressions using different variables. Formerly it showed Vars from
the first target relation that survived executor-startup pruning.
Now it always shows such references using the first relation appearing
in the planner output, independently of what happens during executor
pruning. On the whole that seems like a good thing.
Also make a small tweak in ExplainPreScanNode to ensure that the first
relation will receive a refname assignment in set_rtable_names, even
if it got pruned at startup. Previously the Vars might be shown
without any table qualification, which is confusing in a multi-table
query.
I considered back-patching this, but since the bug doesn't seem to
have any really terrible consequences in existing branches, it
seems better to not change their EXPLAIN output. It's not too late
for v18 though, especially since v18 already made other changes in
the EXPLAIN output for these cases.
Reported-by: Tom Lane <[email protected]>
Author: Andres Freund <[email protected]>
Co-authored-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
xmltotext_with_options sometimes tries to replace the existing
root node of a libxml2 document. In that case xmlDocSetRootElement
will unlink and return the old root node; if we fail to free it,
it's leaked for the remainder of the session. The amount of memory
at stake is not large, a couple hundred bytes per occurrence, but
that could still become annoying in heavy usage.
Our only other xmlDocSetRootElement call is not at risk because
it's working on a just-created document, but let's modify that
code too to make it clear that it's dependent on that.
Author: Tom Lane <[email protected]>
Reviewed-by: Jim Jones <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 16
|
|
Before v14, a reltuples value of 0 was ambiguous: it could either
mean the relation is empty, or it could mean that it hadn't yet
been vacuumed or analyzed. (Commit 3d351d916b taught v14 and newer
to use -1 for the latter case.) This ambiguity allegedly can cause
the planner to choose inefficient plans after restoring to v18 or
newer. To fix, let's just dump reltuples as -1 in that case. This
will cause some truly empty tables to be seen as not-yet-processed,
but that seems unlikely to cause too much trouble in practice.
Note that we could alternatively teach pg_restore_relation_stats()
to translate reltuples based on the version argument, but since
that function doesn't exist until v18, there's no particular
advantage to that approach. That is, there's no chance of
restoring stats dumped from a pre-v14 server to another pre-v14
server. Per discussion, the current policy is to fix pre-v18
behavior differences during export and everything else during
import.
Commit 9879105024 fixed a similar problem for vacuumdb by removing
the check for reltuples != 0. Presumably we could reinstate that
check now, but I've chosen to leave it in place in case reltuples
isn't accurate. As before, processing some empty tables seems
relatively harmless.
Author: Hari Krishna Sunder <[email protected]>
Reviewed-by: Jeff Davis <[email protected]>
Reviewed-by: Corey Huinker <[email protected]>
Discussion: https://postgr.es/m/CAAeiqZ0o2p4SX5_xPcuAbbsmXjg6MJLNuPYSLUjC%3DWh-VeW64A%40mail.gmail.com
|
|
As pointed out by Tom Lane, the patch introduced fragile and invasive
design around plan invalidation handling when locking of prunable
partitions was deferred from plancache.c to the executor. In
particular, it violated assumptions about CachedPlan immutability and
altered executor APIs in ways that are difficult to justify given the
added complexity and overhead.
This also removes the firstResultRels field added to PlannedStmt in
commit 28317de72, which was intended to support deferred locking of
certain ModifyTable result relations.
Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Commit db6a4a985bc categorized md5_password_warnings as an
authentication setting, and the placement in postgresql.conf.sample
matches that, but in the documentation it ended up under logging
settings, which isn't unreasonable but inconsistent. This moves the
documentation chunk to authentication settings as well.
|
|
pg_aios used the terms "read" and "write" for vectored I/O read and
write operations, respectively. The documentation refers to them as
"readv" and "writev", and the code uses internally the terms
PGAIO_OP_READV and PGAIO_OP_WRITEV for them, as of "vectored".
This commit adjusts these operation names to match with the code and the
documentation.
Oversight in 8e293e689bab.
Author: Atsushi Torikoshi <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Since commit 8b1dccd37c7, the PREPARE TRANSACTION WAL record includes
information about dropped statistics entries. However, the WAL resource
manager description function for PREPARE TRANSACTION record failed to
parse this information correctly and always assumed there were
no such entries.
As a result, for example, pg_waldump could not display the dropped
statistics entries stored in PREPARE TRANSACTION records.
The root cause was that ParsePrepareRecord() did not set the number of
statistics entries to drop on commit or abort. These values remained
zero-initialized and were never updated from the parsed record.
This commit fixes the issue by properly setting those values during parsing.
With this fix, pg_waldump can now correctly report dropped statistics
entries in PREPARE TRANSACTION records.
Back-patch to v15, where commit 8b1dccd37c7 was introduced.
Author: Daniil Davydov <[email protected]>
Reviewed-by: Fujii Masao <[email protected]>
Discussion: https://postgr.es/m/CAJDiXgh-6Epb2XiJe4uL0zF-cf0_s_7Lw1TfEHDMLzYjEmfGOw@mail.gmail.com
Backpatch-through: 15
|
|
The statement location calculated for some nested query cases was wrong
when multiple queries are sent as a single string, these being separated
by semicolons. As pointed by Sami Imseih, the location calculation was
incorrect when the last query of nested statement with multiple queries
does **NOT** finish with a semicolon for the last statement. In this
case, the statement length tracked by RawStmt is 0, which is equivalent
to say that the string should be used until its end. The code
previously discarded this case entirely, causing the location to remain
at 0, the same as pointing at the beginning of the string. This caused
pg_stat_statements to store incorrect query strings.
This issue has been introduced in 499edb09741b. I have looked at the
diffs generated by pgaudit back then, and noticed the difference
generated for this nested query case, but I have missed the point that
it was an actual regression with an existing case. A test case is added
in pg_stat_statements to provide some coverage, restoring the pre-17
behavior for the calculation of the query locations. Special thanks to
David Steele, who, through an analysis of the test diffs generated by
pgaudit with the new v18 logic, has poked me about the fact that my
original analysis of the matter was wrong.
The test output of pg_overexplain is updated to reflect the new logic,
as the new locations refer to the beginning of the argument passed to
the function explain_filter(). When the module was introduced in
8d5ceb113e3f, which was after 499edb09741b (for the new calculation
method), the locations of the test were not actually right: the plan
generated for the query string given in input of the function pointed to
the top-level query, not the nested one.
Reported-by: David Steele <[email protected]>
Author: Michael Paquier <[email protected]>
Reviewed-by: Anthonin Bonnefoy <[email protected]>
Reviewed-by: Jian He <[email protected]>
Reviewed-by: Sami Imseih <[email protected]>
Reviewed-by: David Steele <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Presently, fetchAttributeStats() builds array literals by treating
the elements as SQL identifiers. This is incorrect for a couple of
reasons:
* Array literal content must match the external text representation
of the array, i.e., what array_out() would return. One notable
problem is that double quotes are escaped with "" in identifiers
but with \" in array literals. To fix, build the array content
using the pre-existing appendPGArray() function.
* Array literals must be written as string constants. A notable
problem here is that single quotes are escaped via '' in strings
but are not escaped in the text representation of an array. To
fix, append the aforementioned array literal content to the query
with appendStringLiteralAH().
While at it, modify a test case to use an identifier that would
cause the test to fail without this change.
Oversight in commit 9c02e3a986.
Reported-by: Philippe Beaudoin <[email protected]>
Author: Jian He <[email protected]>
Co-authored-by: Nathan Bossart <[email protected]>
Co-authored-by: Stepan Neretin <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Bug: #18923
Discussion: https://postgr.es/m/18923-e79273f87c6bed69%40postgresql.org
|
|
Commit 29f7ce6fe7 added another view that needs adjustment in the
cross-version upgrade test. This should fix the XversionUpgrade
failures in the buildfarm.
Backpatch-through: 16
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
Invalid indexes are suffixed with "_ccnew" or "_ccold". The
documentation missed to mention the initial underscore.
ChooseRelationName() may also append an extra number if indexes with a
similar name already exist; let's add a note about that too.
Author: Alec Cozens <[email protected]>
Discussion: https://postgr.es/m/174733277404.1455388.11471370288789479593@wrigleys.postgresql.org
Backpatch-through: 13
|
|
elog()/ereport() process interrupts, iff the log message is < ERROR and the
log message will be emitted. aio's debug messages are emitted via ereport(),
but in some places the code is not ready for interrupts to be processed.
Fix the issue using a few different methods:
1) handle interrupts arriving concurrently - in some places it's easy to
detect that by fetching the handle's generation a bit earlier
2) Check if interrupts made the work needing to be done obsolete
3) Disallow interrupts, as there's no sane way to make interrupt processing
safe
To prevent some similar issues from being re-introduced, assert that
interrupts are held in pgaio_io_update_state().
This commit also fixes the contents of a debug message I added in 039bfc457e4.
Reported-by: Alexander Lakhin <[email protected]>
Reviewed-by: Noah Misch <[email protected]>
Discussion: https://postgr.es/m/mvpm7ga3dfgz7bvum22hmuz26cariylmcppb3irayftc7bwk3r@l7gb6gr7azhc
|
|
In the grammar, <expr> is a c_expr, which accepts only a limited set
of integer literals and simple expressions without parens. The
deparsing logic didn't quite match the grammar rule, and failed to use
parens e.g. for "5::bigint".
To fix, always surround the expression with parens. Would be nice to
omit the parens in simple cases, but unfortunately it's non-trivial to
detect such simple cases. Even if the expression is a simple literal
123 in the original query, after parse analysis it becomes a FuncExpr
with COERCE_IMPLICIT_CAST rather than a simple Const.
Reported-by: yonghao lee
Backpatch-through: 13
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
Prevent moving the confirmed_flush backwards, as this could lead to data
duplication issues caused by replicating already replicated changes.
This can happen when a client acknowledges an LSN it doesn't have to do
anything for, and thus didn't store persistently. After a restart, the
client can send the prior LSN that it stored persistently as an
acknowledgement, but we need to ignore such an LSN to avoid retreating
confirm_flush LSN.
Diagnosed-by: Zhijie Hou <[email protected]>
Author: shveta malik <[email protected]>
Reviewed-by: Amit Kapila <[email protected]>
Reviewed-by: Dilip Kumar <[email protected]>
Tested-by: Nisha Moond <[email protected]>
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJpy0uDZ29P=BYB1JDWMCh-6wXaNqMwG1u1mB4=10Ly0x7HhwQ@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB57164AB5716AF2E477D53F6F9489A@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
It's common for some files with last year's copyright date
to sneak into the tree between early January (when we normally run
copyright.pl) and feature freeze. Immediately before branching
the new release is an ideal time to fix the stragglers, so add a
note about it to the RELEASE_CHANGES checklist.
Discussion: https://postgr.es/m/CALa6HA4_Wu7-2PV0xv-Q84cT8eG7rTx6bdjUV0Pc=McAwkNMfQ@mail.gmail.com
|
|
A couple of new files have been added in the tree with a copyright year
of 2024 while we were already in 2025. These should be marked with
2025, so let's fix them.
Reported-by: Shaik Mohammad Mujeeb <[email protected]>
Discussion: https://postgr.es/m/CALa6HA4_Wu7-2PV0xv-Q84cT8eG7rTx6bdjUV0Pc=McAwkNMfQ@mail.gmail.com
|
|
Noticed while performing a routine sanity check of the files in the
tree. Issue introduced by 28f04984f0c2.
Discussion: https://postgr.es/m/CALa6HA4_Wu7-2PV0xv-Q84cT8eG7rTx6bdjUV0Pc=McAwkNMfQ@mail.gmail.com
|
|
6b94e7a6da adjusted generate_orderedappend_paths() to consider fractional
paths. However, it didn't manage to interpret the tuple_fraction value
correctly. According to the header comment of grouping_planner(), the
tuple_fraction >= 1 specifies the absolute number of expected tuples. That
number must be divided by the expected total number of tuples to get the
actual fraction.
Even though this is a bug fix, we don't backpatch it. The risks of the side
effects of plan changes on stable branches are too high.
Reported-by: Andrei Lepikhov <[email protected]>
Discussion: https://postgr.es/m/3ca271fa-ca5c-458c-8934-eb148622b270%40gmail.com
Author: Andrei Lepikhov <[email protected]>
Reviewed-by: Junwang Zhao <[email protected]>
Reviewed-by: Alvaro Herrera <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
|
|
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <[email protected]>
Author: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
|
|
Ensure that we refer to the function being used, rather than the
name of the resulting function in question.
Author: Paul A Jungwirth <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CA+renyVZNiHEv5ceKDjA4j5xC6NT6mRuW33BDERBQMi_90_t6A@mail.gmail.com
|
|
This aligns the copyright and legal notice wordig with commit
a233a603bab8 and pgweb commit 2d764dbc083ab8. Backpatch down
to all supported versions.
Author: Daniel Gustafsson <[email protected]>
Reviewed-by: Dave Page <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 13
|
|
In an XMLTABLE expression, columns can be marked NOT NULL, and the
parser internally fabricates an option named "is_not_null" to
represent this. However, the parser also allows users to specify
arbitrary option names. This creates a conflict: a user can
explicitly use "is_not_null" as an option name and assign it a
non-Boolean value, which violates internal assumptions and triggers an
assertion failure.
To fix, this patch checks whether a user-supplied name collides with
the internally reserved option name and raises an error if so.
Additionally, the internal name is renamed to "__pg__is_not_null" to
further reduce the risk of collision with user-defined names.
Reported-by: Евгений Горбанев <[email protected]>
Author: Richard Guo <[email protected]>
Reviewed-by: Alvaro Herrera <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 15
|
|
When creating a new PlannerGlobal node in standard_planner(), most
fields are explicitly initialized, but a few are not. This doesn't
cause any functional issues, as makeNode() zeroes all fields by
default. However, the inconsistency is undesirable from a clarity and
maintenance perspective.
This patch explicitly initializes the remaining fields to improve
consistency and readability.
Author: Richard Guo <[email protected]>
Reviewed-by: David Rowley <[email protected]>
Discussion: https://postgr.es/m/CAMbWs4-TgQHNOiouqGcuHoBqbJjWyx4UxGKxUY3FrF4trGbcPA@mail.gmail.com
|
|
The documentation for log_check() had the parameters in the wrong
order. Also while there, rename %parameters to %params to better
documentation for similar functions which use %params. Backpatch
down to v14 where this was introduced.
Author: Daniel Gustafsson <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/[email protected]
Backpatch-through: 14
|
|
After executing ALTER SUBSCRIPTION tap_sub SET PUBLICATION, we did not
wait for the new walsender process to restart. As a result, an INSERT
executed immediately after the ALTER could be decoded and skipped,
considering it is not part of any subscribed publication. And, the old
apply worker could also confirm the LSN of such an INSERT. This could
cause the replication to resume from a point after the INSERT. In such
cases, we miss the expected warning about the missing publication.
To fix this, ensure the walsender has restarted before continuing after
ALTER SUBSCRIPTION.
Reported-by: Tom Lane as per CI
Author: vignesh C <[email protected]>
Reviewed-by: Xuneng Zhou <[email protected]>
Reviewed-by: Amit Kapila <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
We can add tab-completion with "CHECK (" and "NOT NULL" after ALTER
DOMAIN ADD [CONSTRAINT].
ALTER DOMAIN dom ADD -> CHECK (
ALTER DOMAIN dom ADD -> NOT NULL
ALTER DOMAIN dom ADD -> CONSTRAINT
ALTER DOMAIN dom ADD CONSTRAINT nm -> CHECK (
ALTER DOMAIN dom ADD CONSTRAINT nm -> NOT NULL
Author: jian he <[email protected]>
Author: Dagfinn Ilmari Mannsåker <[email protected]>
Discussion: https://postgr.es/m/CACJufxG_f6LzAT_McC-kKmQWpuWnOYKyNBw8Kv3xzTjPqmeHcA@mail.gmail.com
|
|
The comment describes the order in which fields are sent, and it had one
of the fields in the wrong place.
This has been wrong since e6dbcb72fafa (2008), so backpatch all the way
back.
Author: Emre Hasegeli <[email protected]>
Discussion: https://postgr.es/m/CAE2gYzzf38bR_R=izhpMxAmqHXKeM5ajkmukh4mNs_oXfxcMCA@mail.gmail.com
|
|
As complained about by Valgrind, in commit a379061a22a8 I failed to
realize that I was causing rd_att->constr->check to become allocated
when no CHECK constraints exist; previously it'd remain NULL. (This was
my bug, not the mentioned commit author's). Fix by making the
allocation conditional, and set ->check to NULL if unallocated.
Reported-by: Yasir <[email protected]>
Reviewed-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Added by commit 042a66291b04, no backpatch needed.
|
|
This must be "return MemoryContextAllocationFailure(context, size, flags)"
instead. The effect of this oversight is that if we got a malloc
failure right here, the code would act as though MCXT_ALLOC_NO_OOM
had been specified, whether it was or not. That would likely lead
to a null-pointer-dereference crash at the unsuspecting call site.
Noted while messing with a patch to improve our Valgrind leak
detection support. Back-patch to v17 where this code came in.
|
|
Commit f4ece891fc2f3f96f0571720a1ae30db8030681b added the assertion in
an attempt to catch some defects even after VACUUM FULL or REINDEX.
However, IsCatalogTextUniqueIndexOid(tag.relNumber) always returns false
after a relfilenode change, provoking unintended assertion failures.
Reported-by: Adam Guo <[email protected]>
Reviewed-by: Masahiko Sawada <[email protected]>
Bug: #18912
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvqJz+Zf7a6abisqoTGottDSRD+YPx=aQSgCsCKD476vGA@mail.gmail.com
|
|
This cleans up the code related to the testing infrastructure of AIO
that used injection points, switching the test code to use the new
facility for injection points added by 371f2db8b05e rather than tweaks
to pass and reset arguments to the callbacks run.
This removes all the dependencies to USE_INJECTION_POINTS in the AIO
code. pgaio_io_call_inj(), pgaio_inj_io_get() and pgaio_inj_cur_handle
are now gone.
Reviewed-by: Greg Burd <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
This commit provides some test coverage for the runtime arguments of
injection points, for both INJECTION_POINT_CACHED() and
INJECTION_POINT(), as extended in 371f2db8b05e.
The SQL functions injection_points_cached() and injection_points_run()
are extended so as it is possible to pass an optional string value to
them.
Reviewed-by: Greg Burd <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
The macros INJECTION_POINT() and INJECTION_POINT_CACHED() are extended
with an optional argument that can be passed down to the callback
attached when an injection point is run, giving to callbacks the
possibility to manipulate a stack state given by the caller. The
existing callbacks in modules injection_points and test_aio have their
declarations adjusted based on that.
da7226993fd4 (core AIO infrastructure) and 93bc3d75d8e1 (test_aio) and
been relying on a set of workarounds where a static variable called
pgaio_inj_cur_handle is used as runtime argument in the injection point
callbacks used by the AIO tests, in combination with a TRY/CATCH block
to reset the argument value. The infrastructure introduced in this
commit will be reused for the AIO tests, simplifying them.
Reviewed-by: Greg Burd <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Steven Niu
Discussion: https://postgr.es/m/CABBtG=ejqK58cFWpw3etVZfQfhjC-qOqV+9GQWRnLO+p9wYMbw@mail.gmail.com
|
|
Presently, LibreSSL does not have working support for RSA-PSS,
so disable that test. Per discussion at
https://marc.info/?l=libressl&m=174664225002441&w=2
they do intend to fix this, but it's a ways off yet.
Reported-by: Thomas Munro <[email protected]>
Author: Tom Lane <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CA+hUKG+fLqyweHqFSBcErueUVT0vDuSNWui-ySz3+d_APmq7dw@mail.gmail.com
Backpatch-through: 15
|
|
With LibreSSL, our test of error logging for cert chain depths > 0
reports the wrong certificate. This is almost certainly their bug
not ours, so just tweak the test to accept their answer.
No back-patch needed, since this test case wasn't enabled before
e0f373ee4.
Reported-by: Thomas Munro <[email protected]>
Author: Tom Lane <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CA+hUKG+fLqyweHqFSBcErueUVT0vDuSNWui-ySz3+d_APmq7dw@mail.gmail.com
|
|
Right now there's only one caller, so that this is merely
an exercise in shoving code from one module to another,
but there will shortly be another one. It seems better to
avoid having two copies of this highly-subject-to-change test.
Back-patch to v15, where we first introduced some tests that
don't work with LibreSSL.
Reported-by: Thomas Munro <[email protected]>
Author: Tom Lane <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Discussion: https://postgr.es/m/CA+hUKG+fLqyweHqFSBcErueUVT0vDuSNWui-ySz3+d_APmq7dw@mail.gmail.com
Backpatch-through: 15
|
|
|
|
A 'void *' argument suggests that the caller might pass an arbitrary
struct, which is appropriate for functions like libc's read/write, or
pq_sendbytes(). 'uint8 *' is more appropriate for byte arrays that
have no structure, like the cancellation keys or SCRAM tokens. Some
places used 'char *', but 'uint8 *' is better because 'char *' is
commonly used for null-terminated strings. Change code around SCRAM,
MD5 authentication, and cancellation key handling to follow these
conventions.
Discussion: https://www.postgresql.org/message-id/[email protected]
|
|
The documented max length of a cancel key is 256 bytes, so it fits in
uint8. It nevertheless seems weird to not just use 'int', like in
commit 0f1433f053 for the backend.
Discussion: https://www.postgresql.org/message-id/61be9e31-7b7d-49d5-bc11-721800d89d64%40eisentraut.org
|
|
Reported-by: jian he
Discussion: https://postgr.es/m/CACJufxFM1avdwu=OrTx_uMAjTDbFOj1Gp7mnNHOofTVj9QtmRw@mail.gmail.com
|
|
The title for AT TIME ZONE and AT LOCAL was accidentally wrapping the
"and" in the <literal> tag. Backpatch to v17 where it was introduced
in 97957fdbaa42.
Author: Noboru Saito <[email protected]>
Reviewed-by: Daniel Gustafsson <[email protected]>
Reviewed-by: Tatsuo Ishii <[email protected]>
Reviewed-by: Michael Paquier <[email protected]>
Discussion: https://postgr.es/m/CAAM3qn+7QUWW9R6_YwPKXmky0xGE4n63U3EsxZeWE_QtogeU8g@mail.gmail.com
Backpatch-through: 17
|
|
When creating an explicit Sort node for the outer path of a mergejoin,
we need to determine the number of presorted keys of the outer path to
decide whether explicit incremental sort can be applied. Currently,
this is done by repeatedly calling pathkeys_count_contained_in.
This patch caches the number of presorted outer pathkeys in MergePath,
allowing us to save several calls to pathkeys_count_contained_in. It
can be considered a complement to the changes in commit 828e94c9d.
Reported-by: David Rowley <[email protected]>
Author: Richard Guo <[email protected]>
Reviewed-by: Tender Wang <[email protected]>
Discussion: https://postgr.es/m/CAApHDvqvBireB_w6x8BN5txdvBEHxVgZBt=rUnpf5ww5P_E_ww@mail.gmail.com
|
|
When building a ForeignPath for a joinrel, if there's a possibility
that EvalPlanQual will be executed, we must identify a suitable path
for EPQ checks. If the outer or inner path of the chosen path is a
ForeignPath representing a pushed-down join, we replace it with its
fdw_outerpath to ensure that the EPQ check path consists entirely of
local joins.
If the chosen path is a MergePath, and its outer or inner path is a
ForeignPath that is not already well enough ordered, the MergePath
will have non-NIL outersortkeys or innersortkeys indicating the
desired ordering to be created by an explicit Sort node. If we then
replace the outer or inner path with its corresponding fdw_outerpath,
and that path is already sufficiently ordered, we end up in an
inconsistent state: the MergePath has non-NIL outersortkeys or
innersortkeys, and its input path is already properly ordered. This
inconsistency can result in an Assert failure or the addition of a
redundant Sort node.
To fix, check if the new outer or inner path of a MergePath is already
properly sorted, and set its outersortkeys or innersortkeys to NIL if
so.
Bug: #18902
Reported-by: Nikita Kalinin <[email protected]>
Author: Richard Guo <[email protected]>
Reviewed-by: Tender Wang <[email protected]>
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvrGLBqs_Vm9COMY7uBDvUDMKds7RwC20YjEPf+XRTY9XQ@mail.gmail.com
|
|
Now zero-based.
Reported-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvqMfTBdfwc0Z-tHXLnBMKJLYEZDApgUzA7x_PUDZsY3GA@mail.gmail.com
|
|
Also run src/tools/add_commit_links.pl for a previous commit.
Reported-by: Yugo Nagata
Discussion: https://postgr.es/m/[email protected]
|
|
Reported-by: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4_asKPqTCt0h9pp=zHc9vmPcnczbHeF6Xkxn1LhLapcTQ@mail.gmail.com
|
