use strict;
use warnings;

use PostgresNode;
use TestLib;
use Test::More tests => 14;

# In a SQL_ASCII database, pgwin32_message_to_UTF16() needs to
# interpret everything as UTF8.  We're going to use byte sequences
# that aren't valid UTF-8 strings, so that would fail.  Use LATIN1,
# which accepts any byte and has a conversion from each byte to UTF-8.
$ENV{LC_ALL}           = 'C';
$ENV{PGCLIENTENCODING} = 'LATIN1';

# Create database and user names covering the range of LATIN1
# characters, for use in a connection string by pg_dumpall.  Skip ','
# because of pg_regress --create-role, skip [\n\r] because pg_dumpall
# does not allow them.
my $dbname1 =
    generate_ascii_string(1, 9)
  . generate_ascii_string(11, 12)
  . generate_ascii_string(14, 33)
  . ($TestLib::windows_os ? '' : '"x"')
  .    # IPC::Run mishandles '"' on Windows
  generate_ascii_string(35, 43)
  . generate_ascii_string(45, 63);    # contains '='
my $dbname2 =
  generate_ascii_string(67, 129);     # skip 64-66 to keep length to 62
my $dbname3 = generate_ascii_string(130, 192);
my $dbname4 = generate_ascii_string(193, 255);

my $node = get_new_node('main');
$node->init(extra => [ '--locale=C', '--encoding=LATIN1' ]);

# prep pg_hba.conf and pg_ident.conf
$node->run_log(
	[   $ENV{PG_REGRESS}, '--config-auth',
		$node->data_dir,  '--create-role',
		"$dbname1,$dbname2,$dbname3,$dbname4" ]);
$node->start;

my $backupdir = $node->backup_dir;
my $discard   = "$backupdir/discard.sql";
my $plain     = "$backupdir/plain.sql";
my $dirfmt    = "$backupdir/dirfmt";

foreach my $dbname ($dbname1, $dbname2, $dbname3, $dbname4, 'CamelCase')
{
	$node->run_log([ 'createdb', $dbname ]);
	$node->run_log([ 'createuser', '-s', $dbname ]);
}


# For these tests, pg_dumpall -r is used because it produces a short
# dump.
$node->command_ok(
	[   'pg_dumpall', '-r', '-f', $discard, '--dbname',
		$node->connstr($dbname1),
		'-U', $dbname4 ],
	'pg_dumpall with long ASCII name 1');
$node->command_ok(
	[   'pg_dumpall', '--no-sync', '-r', '-f', $discard, '--dbname',
		$node->connstr($dbname2),
		'-U', $dbname3 ],
	'pg_dumpall with long ASCII name 2');
$node->command_ok(
	[   'pg_dumpall', '--no-sync', '-r', '-f', $discard, '--dbname',
		$node->connstr($dbname3),
		'-U', $dbname2 ],
	'pg_dumpall with long ASCII name 3');
$node->command_ok(
	[   'pg_dumpall', '--no-sync', '-r', '-f', $discard, '--dbname',
		$node->connstr($dbname4),
		'-U', $dbname1 ],
	'pg_dumpall with long ASCII name 4');
$node->command_ok(
	[ 'pg_dumpall', '--no-sync', '-r', '-l', 'dbname=template1' ],
	'pg_dumpall -l accepts connection string');

$node->run_log([ 'createdb', "foo\n\rbar" ]);

# not sufficient to use -r here
$node->command_fails(
	[ 'pg_dumpall', '--no-sync', '-f', $discard ],
	'pg_dumpall with \n\r in database name');
$node->run_log([ 'dropdb', "foo\n\rbar" ]);


# make a table, so the parallel worker has something to dump
$node->safe_psql($dbname1, 'CREATE TABLE t0()');

# XXX no printed message when this fails, just SIGPIPE termination
$node->command_ok(
	[   'pg_dump', '-Fd', '--no-sync', '-j2', '-f', $dirfmt, '-U', $dbname1,
		$node->connstr($dbname1) ],
	'parallel dump');

# recreate $dbname1 for restore test
$node->run_log([ 'dropdb',   $dbname1 ]);
$node->run_log([ 'createdb', $dbname1 ]);

$node->command_ok(
	[ 'pg_restore', '-v', '-d', 'template1', '-j2', '-U', $dbname1, $dirfmt ],
	'parallel restore');

$node->run_log([ 'dropdb', $dbname1 ]);

$node->command_ok(
	[   'pg_restore', '-C',  '-v', '-d',
		'template1',  '-j2', '-U', $dbname1,
		$dirfmt ],
	'parallel restore with create');


$node->command_ok([ 'pg_dumpall', '--no-sync', '-f', $plain, '-U', $dbname1 ],
	'take full dump');
system_log('cat', $plain);
my ($stderr, $result);
my $bootstrap_super = 'boot';
my $restore_super   = qq{a'b\\c=d\\ne"f};


# Restore full dump through psql using environment variables for
# dbname/user connection parameters

my $envar_node = get_new_node('destination_envar');
$envar_node->init(
	extra => [ '-U', $bootstrap_super, '--locale=C', '--encoding=LATIN1' ]);
$envar_node->run_log(
	[   $ENV{PG_REGRESS},      '--config-auth',
		$envar_node->data_dir, '--create-role',
		"$bootstrap_super,$restore_super" ]);
$envar_node->start;

# make superuser for restore
$envar_node->run_log(
	[ 'createuser', '-U', $bootstrap_super, '-s', $restore_super ]);

{
	local $ENV{PGPORT} = $envar_node->port;
	local $ENV{PGUSER} = $restore_super;
	$result = run_log([ 'psql', '-X', '-f', $plain ], '2>', \$stderr);
}
ok($result,
	'restore full dump using environment variables for connection parameters'
);
is($stderr, '', 'no dump errors');


# Restore full dump through psql using command-line options for
# dbname/user connection parameters.  "\connect dbname=" forgets
# user/port from command line.

$restore_super =~ s/"//g
  if $TestLib::windows_os;    # IPC::Run mishandles '"' on Windows
my $cmdline_node = get_new_node('destination_cmdline');
$cmdline_node->init(
	extra => [ '-U', $bootstrap_super, '--locale=C', '--encoding=LATIN1' ]);
$cmdline_node->run_log(
	[   $ENV{PG_REGRESS},        '--config-auth',
		$cmdline_node->data_dir, '--create-role',
		"$bootstrap_super,$restore_super" ]);
$cmdline_node->start;
$cmdline_node->run_log(
	[ 'createuser', '-U', $bootstrap_super, '-s', $restore_super ]);
{
	$result = run_log(
		[   'psql',         '-p', $cmdline_node->port, '-U',
			$restore_super, '-X', '-f',                $plain ],
		'2>',
		\$stderr);
}
ok($result,
	'restore full dump with command-line options for connection parameters');
is($stderr, '', 'no dump errors');