SEGGER - Forum

Hi all,

I will like to develop a Flash Loader using SFL to write an external SPI Flash non memory mapped with an STM32U535RCT6 mcu. First of all, I started using Embedded Studio 8.26c with a different project to do practise and followed this guide:

…

JFlash has this option for the same probe, how can I have it in Jlink script?

Hi Rexxdad,

good to see you're up and running again.

Happy debugging!

-- AlexD

[…]

Not necessarily, just like Ozone IAR can also load external built executable where only part of source files are available (or no source files at all):





How about make the option simpler, if the window was focused on source view and jumped into…

Hi,

I’m trying to program an Infineon AURIX TC37x using U-Flash (V9.18) with a Flasher PRO V7.0, but programming fails before any erase/write because the flash loader rejects the target memory map.

Setup

• Tool: Flasher PRO V7.0
  • Firmware: Feb 6 2026 12:43:34

…

Hi,

Ozone generally works at the disassembly level, only using the source code when available. As explained, when stepping over a line and reaching code without any assigned source lines in the debug information, showing the disassembly is expected. This…

Hi Kai,

As long as the libraries do not define the same functions there should be no issues when using multiple at once. The error messages also do not mention any other libraries.

Could you please try following:

Give the latest ES release a try, in case…

Hello everyone,

I am experiencing a similar problem with my J-Link Plus Compact, when used together with an RT1062 (Embedded Artists iMX RT1062 OEM). I recently upgraded MCUXpresso from v11.4 to v25.6, which then also started using a never J-Link version…

Hey Anthony,

Thank you! I will look into that.

BR, K

Hi,

Thank you for your inquiry.

When using the project option, RTT is included as a library with preconfigured settings. To use the complete RTT API including specific configurations, the RTT sources need to be used instead.

Please see following articles…