Dollhouse crown molding diy

The thing I most love about this hobby is that one minute you're shooting sawdust everywhere and generally making a huge mess and the ne...

Here’s a neat trick to avoid having to miter dentil molding at the upper back corners of a dollhouse room where it is hard to reach. This helped to solve a problem I had – two different pieces of dentil molding that didn’t match so I couldn’t miter them together. Make crown corner blocks from scrap wood – uses the trim pieces that you throw away when you miter! I can’t believe no one makes these for dollhouses! Here’s an example in full scale: http://www.crowncorners.com/install.htm You will…

Create crown molding from balsa wood board and crafting stick. Inspired by the sitting rom in Downton Abbey

DIY- Crown molding for dollhouse from crafting stick and balsa wood board. So easy

diy dollhouse dentil crown molding made with wooden skewers and a length of zipper teeth, before painting it white.

First, I drew out the design on card stock. Standard wainscoting is 3 foot tall so in 1:12 scale that's 3". Then I cut the mat board...

We are going to make the small crown moulding at the top of the upper cabinets. I am showing one length being made. You will need two. Make the lengths at least 8" long. Cut three strips of mat board 1" wide. Glue two of the strips together. Round off one long edge on each piece. Cut the single layer 3/16" wide. Set this aside. Round off a long edge on the left over single piece. Cut another strip that's 5/32" wide. I am sorry about that measurement. Keep your pencils and blades sharp. Cut a…

Tired of mitering corners? It's difficult at times and wastes your cornice. A simple block like this one from Manchester Dollhouse & Wood Works on ebay solves the problem!

Dollhouse trim, mouldings and finishes are the details that make a room, get selection ideas and crown moulding tips in the ORC week 5 reveal.