Jump to content

File:PlasticsInjectionMoulder-die.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (1,869 × 1,344 pixels, file size: 297 KB, MIME type: image/jpeg)

Summary

Description Photo shows one half of a die producing a decorative paperclip (approx 50mm x 100mm), mounted to the movable platen in the workarea of an injection moulder. The injector nozzle is shown retracted at the right side of the photo. The limit switch to control the closing position of the hydraulics (that opens and closes the die ) is visible in the foreground, mounted on the fixed platen.
Date
Source Photograph taken by Glenn McKechnie, September 2005.
Author Glenn McKechnie

Licensing

w:en:Creative Commons
attribution share alike
This file is licensed under the Creative Commons Attribution-Share Alike 2.5 Generic license.
You are free:
  • to share – to copy, distribute and transmit the work
  • to remix – to adapt the work
Under the following conditions:
  • attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

September 2005

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current11:24, 2 September 2005Thumbnail for version as of 11:24, 2 September 20051,869 × 1,344 (297 KB)GraibeardPhotograph taken by Glenn McKechnie, September 2005. {{Cc-by-sa-2.5}}

Global file usage

The following other wikis use this file:

Metadata