File:CNC Swiss turn 001.jpg
Size of this preview: 800 × 600 pixels. Other resolutions: 320 × 240 pixels | 640 × 480 pixels | 1,024 × 768 pixels | 1,280 × 960 pixels | 2,560 × 1,920 pixels | 4,000 × 3,000 pixels.
Original file (4,000 × 3,000 pixels, file size: 4.66 MB, MIME type: image/jpeg)
 | This is a file from the Wikimedia Commons. Information from its description page there is shown below. Commons is a freely licensed media file repository. You can help. |
Summary
| Description |
English: A view inside the enclosure of a CNC Swiss-style screw machine, built circa 1990s or 2000s. A gang of single-point tools slides on either side of the main spindle. The back spindle can take a part from the main spindle and hold it for additional cutting operations on the backside. Finished parts then slide down the ramps into a tray. Depending on the part design, the cycle may be very short, and the finished parts come sliding out at a prodigious rate. The blue-and-orange objects are nozzles that direct a flood of coolant directly into the cutting area. |
| Date | |
| Source | Own work |
| Author | Three-quarter-ten |
Licensing
I, the copyright holder of this work, hereby publish it under the following licenses:
This file is licensed under the Creative Commons Attribution-Share Alike 3.0 Unported license.
- You are free:
- to share – to copy, distribute and transmit the work
- to remix – to adapt the work
- Under the following conditions:
- attribution – You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- share alike – If you remix, transform, or build upon the material, you must distribute your contributions under the same or compatible license as the original.
|
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License. |
You may select the license of your choice.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 20:24, 12 September 2010 | | 4,000 × 3,000 (4.66 MB) | Three-quarter-ten | {{Information |Description={{en|1=A view inside the enclosure of a CNC Swiss-style screw machine, built circa 1990s or 2000s. A gang of single-point tools slides on either side of the main spindle. The back spindle can take a part from the main spindle an |
File usage
The following 3 pages use this file:
