Design of the FAT file system
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
Developer(s) | Microsoft, SCP, IBM, Compaq, Digital Research, Novell, Caldera |
---|---|
Full name | File Allocation Table: FAT12 (12-bit version), FAT16 (16-bit versions), FAT32 (32-bit version with 28 bits used), exFAT (64-bit versions) |
Introduced | 1977 (Standalone Disk BASIC-80) FAT12: August 1980 (SCP QDOS) FAT16: August 1984 (IBM PC DOS 3.0) FAT16B: November 1987 (Compaq MS-DOS 3.31) FAT32: August 1996 (Windows 95 OSR2) exFAT: November 2006 (Windows Embedded CE 6.0) |
Partition IDs | MBR/EBR: FAT12: 0x01 e.a.FAT16: 0x04 0x06 0x0E e.a.FAT32: 0x0B 0x0C e.a.exFAT: 0x07 e.a.BDP: EBD0A0A2-B9E5-443387C0-68B6B72699C7 |
Structures | |
Directory contents | Table |
File allocation | Linked list |
Bad blocks | Cluster tagging |
Limits | |
Max volume size | FAT12: 32 MB (256 MB for 64 KB clusters) FAT16: 2 GB (4 GB for 64 KB clusters) FAT32: 2 TB (16 TB for 4 KB sectors) |
Max file size | 4,294,967,295 bytes (4 GB - 1) with FAT16B and FAT32[1] |
Max no. of files | FAT12: 4,068 for 8 KB clusters FAT16: 65,460 for 32 KB clusters FAT32: 268,173,300 for 32 KB clusters |
Max filename length | 8.3 filename, or 255 UCS-2 characters when using LFN |
Features | |
Dates recorded | Modified date/time, creation date/time (DOS 7.0 and higher only), access date (only available with ACCDATE enabled),[2] deletion date/time (only with DELWATCH 2) |
Date range | 1980-01-01 to 2099-12-31 (2107-12-31) |
Date resolution | 2 seconds for last modified time, 10 ms for creation time, 1 day for access date, 2 seconds for deletion time |
Forks | Not natively |
Attributes | Read-only, Hidden, System, Volume, Directory, Archive |
File system permissions | FAT12/FAT16: File, directory and volume access rights for Read, Write, Execute, Delete only with DR-DOS, PalmDOS, Novell DOS, OpenDOS, FlexOS, 4680 OS, 4690 OS, Concurrent DOS, Multiuser DOS, System Manager, REAL/32 (Execute right only with FlexOS, 4680 OS, 4690 OS; individual file / directory passwords not with FlexOS, 4680 OS, 4690 OS; World/Group/Owner permission classes only with multiuser security loaded) FAT32: Partial, only with DR-DOS, REAL/32 and 4690 OS |
Transparent compression | FAT12/FAT16: Per-volume, SuperStor, Stacker, DoubleSpace, DriveSpace FAT32: No |
Transparent encryption | FAT12/FAT16: Per-volume only with DR-DOS FAT32: No |
The FAT file system is a file system used on MS-DOS and Windows 9x family of operating systems.[3] It continues to be used on mobile devices and embedded systems, and thus is a well suited file system for data exchange between computers and devices of almost any type and age from 1981 through the present.
Structure
[edit]A FAT file system is composed of four regions:
Region | Size in sectors | Contents | Notes |
---|---|---|---|
Reserved sectors | (number of reserved sectors) | Boot Sector | The first reserved sector (logical sector 0) is the Boot Sector (also called Volume Boot Record or simply VBR). It includes an area called the BIOS Parameter Block (BPB) which contains some basic file system information, in particular its type and pointers to the location of the other sections, and usually contains the operating system's boot loader code.
Important information from the Boot Sector is accessible through an operating system structure called the Drive Parameter Block (DPB) in DOS and OS/2. The total count of reserved sectors is indicated by a field inside the Boot Sector, and is usually 32 on FAT32 file systems.[4] For FAT32 file systems, the reserved sectors include a File System Information Sector at logical sector 1 and a Backup Boot Sector at logical sector 6. While many other vendors have continued to utilize a single-sector setup (logical sector 0 only) for the bootstrap loader, Microsoft's boot sector code has grown to span over logical sectors 0 and 2 since the introduction of FAT32, with logical sector 0 depending on sub-routines in logical sector 2. The Backup Boot Sector area consists of three logical sectors 6, 7, and 8 as well. In some cases, Microsoft also uses sector 12 of the reserved sectors area for an extended boot loader. |
FS Information Sector (FAT32 only) | |||
More reserved sectors (optional) | |||
FAT Region | (number of FATs) * (sectors per FAT) | File Allocation Table #1 | This typically contains two copies of the File Allocation Table for the sake of redundancy checking, although rarely used, even by disk repair utilities. These are maps of the Data Region, indicating which clusters are used by files and directories. In FAT12 and FAT16 they immediately follow the reserved sectors. Typically the extra copies are kept in tight synchronization on writes, and on reads they are only used when errors occur in the first FAT. The first two clusters (cluster 0 and 1) in the map contain special values. |
File Allocation Table #2 ... (optional) | |||
Root Directory Region | (number of root entries * 32) / (bytes per sector) | Root Directory (FAT12 and FAT16 only) | This is a Directory Table that stores information about the files and directories located in the root directory. It is only used with FAT12 and FAT16, and imposes on the root directory a fixed maximum size which is pre-allocated at creation of this volume. FAT32 stores the root directory in the Data Region, along with files and other directories, allowing it to grow without such a constraint. Thus, for FAT32, the Data Region starts here. |
Data Region | (number of clusters) * (sectors per cluster) | Data Region (for files and directories) ... (to end of partition or disk) | This is where the actual file and directory data is stored and takes up most of the partition. FAT32 typically commences the Root Directory Table in cluster number 2: the first cluster of the Data Region. |
FAT uses little-endian format for all entries in the header (except for, where explicitly mentioned, some entries on Atari ST boot sectors) and the FAT(s).[5] It is possible to allocate more FAT sectors than necessary for the number of clusters. The end of the last sector of each FAT copy can be unused if there are no corresponding clusters. The total number of sectors (as noted in the boot record) can be larger than the number of sectors used by data (clusters × sectors per cluster), FATs (number of FATs × sectors per FAT), the root directory (n/a for FAT32), and hidden sectors including the boot sector: this would result in unused sectors at the end of the volume. If a partition contains more sectors than the total number of sectors occupied by the file system it would also result in unused sectors, at the end of the partition, after the volume.
Reserved sectors area
[edit]Boot Sector
[edit]On non-partitioned storage devices, such as floppy disks, the Boot Sector (VBR) is the first sector (logical sector 0 with physical CHS address 0/0/1 or LBA address 0). For partitioned storage devices such as hard disks, the Boot Sector is the first sector of a partition, as specified in the partition table of the device.
Byte offset | Length (bytes) | Contents |
---|---|---|
0x000 | 3 | Jump instruction. If the boot sector has a valid signature residing in the last two bytes of the boot sector (tested by most boot loaders residing in the System BIOS or the MBR) and this volume is booted from, the prior boot loader will pass execution to this entry point with certain register values, and the jump instruction will then skip past the rest of the (non-executable) header. See Volume Boot Record.
Since DOS 2.0, valid x86-bootable disks must start with either a short jump followed by a NOP (opstring sequence 0xEB 0x?? 0x90[6][7] as seen since DOS 3.0[nb 1]—and on DOS 1.1[8][9]) or a near jump (0xE9 0x?? 0x??[6][7] as seen on most (Compaq, TeleVideo) DOS 2.x formatted disks as well as on some (Epson, Olivetti) DOS 3.1 disks). For backward compatibility MS-DOS, PC DOS and DR-DOS also accept a jump (0x69 0x?? 0x??)[6][7][10] on removable disks. On hard disks, DR DOS additionally accepts the swapped JMPS sequence starting with a NOP (0x90 0xEB 0x??),[10] whereas MS-DOS/PC DOS do not. (See below for Atari ST compatibility.) The presence of one of these opstring patterns (in combination with a test for a valid media descriptor value at offset 0x015) serves as indicator to DOS 3.3 and higher that some kind of BPB is present (although the exact size should not be determined from the jump target since some boot sectors contain private boot loader data following the BPB), while for DOS 1.x (and some DOS 3.0) volumes, they will have to fall back to the DOS 1.x method to detect the format via the media byte in the FAT (in logical sector 1). |
0x003 | 8 | OEM Name (padded with spaces 0x20). This value determines in which system the disk was formatted.
Although officially documented as free for OEM use, MS-DOS/PC DOS (since 3.1), Windows 95/98/SE/ME and OS/2 check this field to determine which other parts of the boot record can be relied upon and how to interpret them. Therefore, setting the OEM label to arbitrary or bogus values may cause MS-DOS, PC DOS and OS/2 to not recognize the volume properly and cause data corruption on writes.[11][12][13] Common examples are " Some vendors store licensing info or access keys in this entry. The Volume Tracker in Windows 95/98/SE/ME will overwrite the OEM label with " Some boot loaders make adjustments or refuse to pass control to a boot sector depending on certain values detected here (e.g., NEWLDR offset 0x018). The boot ROM of the Wang Professional Computer will only treat a disk as bootable if the first four characters of the OEM label are " If, in an FAT32 EBPB, the signature at sector offset 0x042 is 0x29 and both total sector entries are 0, the file system entry may serve as a 64-bit total sector count entry and the OEM label entry may be used as alternative file system type instead of the normal entry at offset 0x052. In a similar fashion, if this entry is set to " |
0x00B | varies | BIOS Parameter Block (13, 19, 21 or 25 bytes), Extended BIOS Parameter Block (32 or 51 bytes) or FAT32 Extended BIOS Parameter Block (60 or 79 bytes); size and contents varies between operating systems and versions, see below |
varies | varies | File system and operating system specific boot code; often starts immediately behind [E]BPB, but sometimes additional "private" boot loader data is stored between the end of the [E]BPB and the start of the boot code; therefore the jump at offset 0x001 cannot be used to reliably derive the exact [E]BPB format from.
(In conjunction with at least a DOS 3.31 BPB some GPT boot loaders (like BootDuet) use 0x1FA–0x1FD to store the high 4 bytes of the hidden sectors for volumes located outside the first 232-1 sectors. Since this location may contain code or other data in other boot sectors, it may not be written to when 0x1F9–0x1FD do not all contain zero.) |
0x1FD | 1 | Physical drive number (only in DOS 3.2 to 3.31 boot sectors). With OS/2 1.0 and DOS 4.0, this entry moved to sector offset 0x024 (at offset 0x19 in the EBPB). Most Microsoft and IBM boot sectors maintain values of 0x00 at offset 0x1FC and 0x1FD ever since, although they are not part of the signature at 0x1FE.
If this belongs to a boot volume, the DR-DOS 7.07 enhanced MBR can be configured (see NEWLDR offset 0x014) to dynamically update this entry to the DL value provided at boot time or the value stored in the partition table. This enables booting off alternative drives, even when the VBR code ignores the DL value. |
0x1FE | 2 | Boot sector signature (0x55 0xAA).[4][nb 2] This signature indicates an IBM PC compatible boot code and is tested by most boot loaders residing in the System BIOS or the MBR before passing execution to the boot sector's boot code (but, e.g., not by the original IBM PC ROM-BIOS[16]). This signature does not indicate a particular file system or operating system. Since this signature is not present on all FAT-formatted disks (e.g., not on DOS 1.x[8][9] or non-x86-bootable FAT volumes), operating systems must not rely on this signature to be present when logging in volumes (old issues of MS-DOS/PC DOS prior to 3.3 checked this signature, but newer issues as well as DR-DOS do not). Formatting tools must not write this signature if the written boot sector does not contain at least an x86-compatible dummy boot loader stub; at minimum, it must halt the CPU in an endless loop (0xF4 0xEB 0xFD) or issue an INT 19h and RETF (0xCD 0x19 0xCB). These opstrings should not be used at sector offset 0x000, however, because DOS tests for other opcodes as signatures. Many MSX-DOS 2 floppies use 0xEB 0xFE 0x90 at sector offset 0x000 to catch the CPU in a tight loop while maintaining an opcode pattern recognized by MS-DOS/PC DOS.
This signature must be located at fixed sector offset 0x1FE for sector sizes 512 or higher. If the physical sector size is larger, it may be repeated at the end of the physical sector. Atari STs will assume a disk to be Atari 68000 bootable if the checksum over the 256 big-endian words of the boot sector equals 0x1234.[17][nb 3] If the boot loader code is IBM compatible, it is important to ensure that the checksum over the boot sector does not match this checksum by accident. If this would happen to be the case, changing an unused bit (e.g., before or after the boot code area) can be used to ensure this condition is not met. In rare cases, a reversed signature 0xAA 0x55 has been observed on disk images. This can be the result of a faulty implementation in the formatting tool based on faulty documentation,[nb 2] but it may also indicate a swapped byte order of the disk image, which might have occurred in transfer between platforms using a different endianness. BPB values and FAT12, FAT16 and FAT32 file systems are meant to use little-endian representation only and there are no known implementations of variants using big-endian values instead. |
Byte offset | Length (bytes) | Contents |
---|---|---|
0x000 | 2 | Jump instruction. Original Atari ST boot sectors start with a 68000 BRA.S instruction (0x60 0x??).[5] For compatibility with PC operating systems, Atari ST formatted disks since TOS 1.4 start with 0xE9 0x?? instead. |
0x002 | 6 | OEM Name (padded with spaces 0x20), e.g., "Loader " (0x4C 0x6F 0x61 0x64 0x65 0x72) on volumes containing an Atari ST boot loader. See OEM Name precautions for PC formatted disks above. The offset and length of this entry are different compared to the entry on PC formatted disks.
|
0x008 | 3 | Disk serial number[5] (default: 0x00 0x00 0x00), used by Atari ST to detect a disk change. (Windows 9x Volume Tracker will always store "IHC " here on non-write-protected floppy disks; see above.) This value must be changed if the disk content is externally changed, otherwise Atari STs may not recognize the change on re-insertion. This entry overlaps the OEM Name field on PC formatted disks. For maximum compatibility, it may be necessary to match certain patterns here; see above.
|
0x00B | 19 | DOS 3.0 BIOS Parameter Block (little-endian format) |
0x01E | varies | Private boot sector data (mixed big-endian and little-endian format) |
varies | varies | File system and operating system specific Atari ST boot code. No assumptions must be made in regard to the load position of the code, which must be relocatable. If loading an operating system (TOS.IMG[5]) fails, the code can return to the Atari ST BIOS with a 68000 RTS (opcode 0x4E75 with big-endian byte sequence 0x4E 0x75[nb 2]) instruction and all registers unaltered. |
0x1FE | 2 | Checksum. The 16-bit checksum over the 256 big-endian words of the 512 bytes boot sector including this word must match the magic value 0x1234 in order to indicate an Atari ST 68000 executable boot sector code.[17] This checksum entry can be used to align the checksum accordingly.[nb 3]
If the logical sector size is larger than 512 bytes, the remainder is not included in the checksum and is typically zero-filled.[17] Since some PC operating systems erroneously do not accept FAT formatted floppies if the 0x55 0xAA[nb 2] signature is not present here, it is advisable to place the 0x55 0xAA in this place (and add an IBM compatible boot loader or stub) and use an unused word in the private data or the boot code area or the serial number in order to ensure that the checksum 0x1234[nb 3] is not matched (unless the shared fat code overlay would be both IBM PC and Atari ST executable at the same time). |
Byte offset | Length (bytes) | Contents |
---|---|---|
0x000 | 3 | Dummy jump instruction (e.g., 0xEB 0xFE 0x90). |
0x003 | 8 | OEM Name (padded with spaces 0x20). |
0x00B | 19 | DOS 3.0 BPB |
0x01E | varies (2) | MSX-DOS 1 code entry point for Z80 processors into MSX boot code. This is where MSX-DOS 1 machines jump to when passing control to the boot sector. This location overlaps with BPB formats since DOS 3.2 or the x86 compatible boot sector code of IBM PC compatible boot sectors and will lead to a crash on the MSX machine unless special precautions have been taken such as catching the CPU in a tight loop here (opstring 0x18 0xFE for JR 0x01E). |
0x020 | 6 | MSX-DOS 2 volume signature "VOL_ID ".
|
0x026 | 1 | MSX-DOS 2 undelete flag (default: 0x00. If the "VOL_ID " signature is present at sector offset 0x020, this flag indicates, if the volume holds deleted files which can be undeleted (see offset 0x0C in directory entries).
|
0x027 | 4 | MSX-DOS 2 disk serial number (default: 0x00000000). If the "VOL_ID " signature is present at sector offset 0x020, MSX-DOS 2 stores a volume serial number here for media change detection.
|
0x02B | 5 | reserved |
0x030 | varies (2) | MSX-DOS 2 code entry point for Z80 processors into MSX boot code. This is where MSX-DOS 2 machines jump to when passing control to the boot sector. This location overlaps with EBPB formats since DOS 4.0 / OS/2 1.2 or the x86 compatible boot sector code of IBM PC compatible boot sectors and will lead to a crash on the MSX machine unless special precautions have been taken such as catching the CPU in a tight loop here (opstring 0x18 0xFE for JR 0x030). |
0x1FE | 2 | Signature |
BIOS Parameter Block
[edit]
Sector offset | BPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 2 | Bytes per logical sector; the most common value is 512. Some operating systems don't support other sector sizes. For simplicity and maximum performance, the logical sector size is often identical to a disk's physical sector size, but can be larger or smaller in some scenarios.
The minimum allowed value for non-bootable FAT12/FAT16 volumes with up to 65,535 logical sectors is 32 bytes, or 64 bytes for more than 65,535 logical sectors. The minimum practical value is 128. Some pre-DOS 3.31 OEM versions of DOS used logical sector sizes up to 8192 bytes for logical sectored FATs. Atari ST GEMDOS supports logical sector sizes between 512 and 4096.[17] DR-DOS supports booting off FAT12/FAT16 volumes with logical sector sizes up to 32 KB and INT 13h implementations supporting physical sectors up to 1024 bytes/sector.[nb 4] The minimum logical sector size for standard FAT32 volumes is 512 bytes, which can be reduced downto 128 bytes without support for the FS Information Sector. Floppy drives and controllers use physical sector sizes of 128, 256, 512 and 1024 bytes (e.g., PC/AX). The Atari Portfolio supports a sector size of 512 for volumes larger than 64 KB, 256 bytes for volumes larger 32 KB and 128 bytes for smaller volumes. Magneto-optical drives used sector sizes of 512, 1024 and 2048 bytes. In 2005 some Seagate custom hard disks used sector sizes of 1024 bytes instead of the default 512 bytes.[18] Advanced Format hard disks use 4096 bytes per sector (4Kn) since 2010, but will also be able to emulate 512 byte sectors (512e) for a transitional period. Linux, and by extension Android, supports a logical sector size far larger, officially documented in the Man page for the filesystem utilities as up to 32KB. |
0x00D | 0x02 | 1 | Logical sectors per cluster. Allowed values are 1, 2, 4, 8, 16, 32, 64, and 128. Some MS-DOS 3.x versions supported a maximum cluster size of 4 KB only, whereas modern MS-DOS/PC DOS and Windows 95 support a maximum cluster size of 32 KB. Windows 98/SE/ME partially support a cluster size of 64 KB as well, but some FCB services are not available on such disks and various applications fail to work. The Windows NT family and some alternative DOS versions such as PTS-DOS fully support 64 KB clusters.
For most DOS-based operating systems, the maximum cluster size remains at 32 KB (or 64 KB) even for sector sizes larger than 512 bytes. For logical sector sizes of 1 KB, 2 KB and 4 KB, Windows NT 4.0 supports cluster sizes of 128 KB, while for 2 KB and 4 KB sectors the cluster size can reach 256 KB. Some versions of DR-DOS provide limited support for 128 KB clusters with 512 bytes/sector using a sectors/cluster value of 0. MS-DOS/PC DOS will hang on startup if this value is erroneously specified as 0.[19]: INT 21h AX=53h |
0x00E | 0x03 | 2 | Count of reserved logical sectors. The number of logical sectors before the first FAT in the file system image. At least 1 for this sector, usually 32 for FAT32 (to hold the extended boot sector, FS info sector and backup boot sectors).
Since DR-DOS 7.0x FAT32 formatted volumes use a single-sector boot sector, FS info sector and backup sector, some volumes formatted under DR-DOS use a value of 4 here. |
0x010 | 0x05 | 1 | Number of File Allocation Tables. Almost always 2; RAM disks might use 1. Most versions of MS-DOS/PC DOS do not support more than 2 FATs. Some DOS operating systems support only two FATs in their built-in disk driver, but support other FAT counts for block device drivers loaded later on.
Volumes declaring 2 FATs in this entry will never be treated as TFAT volumes. If the value differs from 2, some Microsoft operating systems may attempt to mount the volume as a TFAT volume and use the second cluster (cluster 1) of the first FAT to determine the TFAT status. |
0x011 | 0x06 | 2 | Maximum number of FAT12 or FAT16 root directory entries. 0 for FAT32, where the root directory is stored in ordinary data clusters; see offset 0x02C in FAT32 EBPBs.
A value of 0 without a FAT32 EBPB (no signature 0x29 or 0x28 at offset 0x042) may also indicate a variable-sized root directory in some non-standard FAT12 and FAT16 implementations, which store the root directory start cluster in the cluster 1 entry in the FAT.[20] This extension, however, is not supported by mainstream operating systems,[20] as it can conflict with other uses of the cluster 1 entry for maintenance flags, the current end-of-chain-marker, or TFAT extensions. This value must be adjusted so that directory entries always consume full logical sectors, given that each directory entry takes up 32 bytes. MS-DOS/PC DOS require this value to be a multiple of 16. The maximum value supported on floppy disks is 240,[6] the maximum value supported by MS-DOS/PC DOS on hard disks is 512.[6] DR-DOS supports booting off FAT12/FAT16 volumes, if the boot file is located in the first 2048 root directory entries. |
0x013 | 0x08 | 2 | Total logical sectors. 0 for FAT32. (If zero, use 4 byte value at offset 0x020) |
0x015 | 0x0A | 1 | Media descriptor (compare: FAT ID):[21][22][23][nb 1]
This value must reflect the media descriptor stored (in the entry for cluster 0) in the first byte of each copy of the FAT. Certain operating systems before DOS 3.2 (86-DOS, MS-DOS/PC DOS 1.x and MSX-DOS version 1.0) ignore the boot sector parameters altogether and use the media descriptor value from the first byte of the FAT to choose among internally pre-defined parameter templates. Must be greater or equal to 0xF0 since DOS 4.0.[6] On removable drives, DR-DOS will assume the presence of a BPB if this value is greater or equal to 0xF0,[6] whereas for fixed disks, it must be 0xF8 to assume the presence of a BPB. Initially, these values were meant to be used as bit flags; for any removable media without a recognized BPB format and a media descriptor of either 0xF8 or 0xFA to 0xFF MS-DOS/PC DOS treats bit 1 as a flag to choose a 9-sectors per track format rather than an 8-sectors format, and bit 0 as a flag to indicate double-sided media.[7] Values 0x00 to 0xEF and 0xF1 to 0xF7 are reserved and must not be used. |
0x016 | 0x0B | 2 | Logical sectors per File Allocation Table for FAT12/FAT16. FAT32 sets this to 0 and uses the 32-bit value at offset 0x024 instead. |
DOS 3.0 BPB:
The following extensions were documented since DOS 3.0, however, they were already supported by some issues of DOS 2.11.[28] MS-DOS 3.10 still supported the DOS 2.0 format, but could use the DOS 3.0 format as well.
Sector offset | BPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 13 | DOS 2.0 BPB |
0x018 | 0x0D | 2 | Physical sectors per track for disks with INT 13h CHS geometry,[4] e.g., 15 for a "1.20 MB" (1200 KB) floppy.
A zero entry indicates that this entry is reserved, but not used. |
0x01A | 0x0F | 2 | Number of heads for disks with INT 13h CHS geometry,[4] e.g., 2 for a double sided floppy.
A bug in all versions of MS-DOS/PC DOS up to including 7.10 causes these operating systems to crash for CHS geometries with 256 heads, therefore almost all BIOSes choose a maximum of 255 heads only. A zero entry indicates that this entry is reserved, but not used. |
0x01C | 0x11 | 2 | Count of hidden sectors preceding the partition that contains this FAT volume. This field should always be zero on media that are not partitioned. This DOS 3.0 entry is incompatible with a similar entry at offset 0x01C in BPBs since DOS 3.31.
It must not be used if the logical sectors entry at offset 0x013 is zero. |
DOS 3.2 BPB:
Officially, MS-DOS 3.20 still used the DOS 3.0 format, but SYS
and FORMAT
were adapted to support a 6 bytes longer format already (of which not all entries were used).
Sector offset | BPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 19 | DOS 3.0 BPB |
0x01E | 0x13 | 2 | Total logical sectors including hidden sectors. This DOS 3.2 entry is incompatible with a similar entry at offset 0x020 in BPBs since DOS 3.31.
It must not be used if the logical sectors entry at offset 0x013 is zero. |
DOS 3.31 BPB:
Officially introduced with DOS 3.31 and not used by DOS 3.2, some DOS 3.2 utilities were designed to be aware of this new format already. Official documentation recommends to trust these values only if the logical sectors entry at offset 0x013 is zero.
Sector offset | BPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 13 | DOS 2.0 BPB |
0x018 | 0x0D | 2 | Physical sectors per track for disks with INT 13h CHS geometry,[4] e.g., 18 for a "1.44 MB" (1440 KB) floppy. Unused for drives, which don't support CHS access any more. Identical to an entry available since DOS 3.0.
A zero entry indicates that this entry is reserved, but not used. A value of 0 may indicate LBA-only access, but may cause a divide-by-zero exception in some boot loaders, which can be avoided by storing a neutral value of 1 here, if no CHS geometry can be reasonably emulated. |
0x01A | 0x0F | 2 | Number of heads for disks with INT 13h CHS geometry,[4] e.g., 2 for a double sided floppy. Unused for drives, which don't support CHS access any more. Identical to an entry available since DOS 3.0.
A bug in all versions of MS-DOS/PC DOS up to including 7.10 causes these operating systems to crash for CHS geometries with 256 heads, therefore almost all BIOSes choose a maximum of 255 heads only. A zero entry indicates that this entry is reserved, but not used. A value of 0 may indicate LBA-only access, but may cause a divide-by-zero exception in some boot loaders, which can be avoided by storing a neutral value of 1 here, if no CHS geometry can be reasonably emulated. |
0x01C | 0x11 | 4 | Count of hidden sectors preceding the partition that contains this FAT volume. This field should always be zero on media that are not partitioned.[24][25][26] This DOS 3.31 entry is incompatible with a similar entry at offset 0x01C in DOS 3.0-3.3 BPBs. At least, it can be trusted if it holds zero, or if the logical sectors entry at offset 0x013 is zero.
If this belongs to an Advanced Active Partition (AAP) selected at boot time, the BPB entry will be dynamically updated by the enhanced MBR to reflect the "relative sectors" value in the partition table, stored at offset 0x1B6 in the AAP or NEWLDR MBR, so that it becomes possible to boot the operating system from EBRs. (Some GPT boot loaders (like BootDuet) use boot sector offsets 0x1FA–0x1FD to store the high 4 bytes of a 64-bit hidden sectors value for volumes located outside the first 232−1 sectors.) |
0x020 | 0x15 | 4 | Total logical sectors (if greater than 65535; otherwise, see offset 0x013). This DOS 3.31 entry is incompatible with a similar entry at offset 0x01E in DOS 3.2-3.3 BPBs. Officially, it must be used only if the logical sectors entry at offset 0x013 is zero, but some operating systems (some old versions of DR DOS) use this entry also for smaller disks.
For partitioned media, if this and the entry at 0x013 are both 0 (as seen on some DOS 3.x FAT16 volumes), many operating systems (including MS-DOS/PC DOS) will retrieve the value from the corresponding partition's entry (at offset 0xC) in the MBR instead. If both of these entries are 0 on volumes using a FAT32 EBPB with signature 0x29, values exceeding the 4,294,967,295 (232−1) limit (f.e. some DR-DOS volumes with 32-bit cluster entries) can use a 64-bit entry at offset 0x052 instead. |
A simple formula translates a volume's given cluster number CN
to a logical sector number LSN
:[24][25][26]
- Determine (once)
SSA=RSC+FN×SF+ceil((32×RDE)/SS)
, where the reserved sector countRSC
is stored at offset 0x00E, the number of FATsFN
at offset 0x010, the sectors per FATSF
at offset 0x016 (FAT12/FAT16) or 0x024 (FAT32), the root directory entriesRDE
at offset 0x011, the sector sizeSS
at offset 0x00B, andceil(x)
rounds up to a whole number. - Determine
LSN=SSA+(CN−2)×SC
, where the sectors per clusterSC
are stored at offset 0x00D.
On unpartitioned media the volume's number of hidden sectors is zero and therefore LSN
and LBA
addresses become the same for as long as a volume's logical sector size is identical to the underlying medium's physical sector size. Under these conditions, it is also simple to translate between CHS
addresses and LSNs
as well:
LSN=SPT×(HN+(NOS×TN))+SN−1
, where the sectors per track SPT
are stored at offset 0x018, and the number of sides NOS
at offset 0x01A. Track number TN
, head number HN
, and sector number SN
correspond to Cylinder-head-sector: the formula gives the known CHS to LBA translation.
Extended BIOS Parameter Block
[edit]Further structure used by FAT12 and FAT16 since OS/2 1.0 and DOS 4.0, also known as Extended BIOS Parameter Block (EBPB) (bytes below sector offset 0x024 are the same as for the DOS 3.31 BPB):
Sector offset | EBPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 25 | DOS 3.31 BPB |
0x024 | 0x19 | 1 | Physical drive number (0x00 for (first) removable media, 0x80 for (first) fixed disk as per INT 13h). Allowed values for possible physical drives depending on BIOS are 0x00-0x7E and 0x80-0xFE. Values 0x7F and 0xFF are reserved for internal purposes such as remote or ROM boot and should never occur on disk. Some boot loaders such as the MS-DOS/PC DOS boot loader use this value when loading the operating system, others ignore it altogether or use the drive number provided in the DL register by the underlying boot loader (e.g., with many BIOSes and MBRs). The entry is sometimes changed by the SYS command or it can be dynamically fixed up by the prior bootstrap loader in order to force the boot sector code to load the operating system from alternative physical disks than the default.
A similar entry existed (only) in DOS 3.2 to 3.31 boot sectors at sector offset 0x1FD. If this belongs to a boot volume, the DR-DOS 7.07 enhanced MBR can be configured (see NEWLDR offset 0x014) to dynamically update this EBPB entry to the DL value provided at boot time or the value stored in the partition table. This enables booting off alternative drives, even when the VBR code ignores the DL value. |
0x025 | 0x1A | 1 | Reserved;
|
0x026 | 0x1B | 1 | Extended boot signature. (Should be 0x29[24][25][26][21] to indicate that an EBPB with the following 3 entries exists (since OS/2 1.2 and DOS 4.0). Can be 0x28 on some OS/2 1.0-1.1 and PC DOS 3.4 disks indicating an earlier form of the EBPB format with only the serial number following. MS-DOS/PC DOS 4.0 and higher, OS/2 1.2 and higher as well as the Windows NT family recognize both signatures accordingly.) |
0x027 | 0x1C | 4 | Volume ID (serial number)
Typically the serial number "xxxx-xxxx" is created by a 16-bit addition of both DX values returned by INT 21h/AH=2Ah (get system date)[nb 5] and INT 21h/AH=2Ch (get system time)[nb 5] for the high word and another 16-bit addition of both CX values for the low word of the serial number.
Alternatively, some DR-DOS disk utilities provide a |
0x02B | 0x20 | 11 | Partition Volume Label, padded with blanks (0x20), e.g., "NO␠NAME␠␠␠␠ " Software changing the directory volume label in the file system should also update this entry, but not all software does. The partition volume label is typically displayed in partitioning tools since it is accessible without mounting the volume. Supported since OS/2 1.2 and MS-DOS 4.0 and higher.
Not available if the signature at 0x026 is set to 0x28. This area was used by boot sectors of DOS 3.2 to 3.3 to store a private copy of the Disk Parameter Table (DPT) instead of using the INT 1Eh pointer to retrieve the ROM table as in later issues of the boot sector. The re-usage of this location for the mostly cosmetical partition volume label minimized problems if some older system utilities would still attempt to patch the former DPT. |
0x036 | 0x2B | 8 | File system type, padded with blanks (0x20), e.g., "FAT12␠␠␠ ", "FAT16␠␠␠ ", "FAT␠␠␠␠␠ "
This entry is meant for display purposes only and must not be used by the operating system to identify the type of the file system. Nevertheless, it is sometimes used for identification purposes by third-party software and therefore the values should not differ from those officially used. Supported since OS/2 1.2 and MS-DOS 4.0 and higher. Not available if the signature at 0x026 is set to 0x28. |
FAT32 Extended BIOS Parameter Block
[edit]In essence FAT32 inserts 28 bytes into the EBPB, followed by the remaining 26 (or sometimes only 7) EBPB bytes as shown above for FAT12 and FAT16. Microsoft and IBM operating systems determine the type of FAT file system used on a volume solely by the number of clusters, not by the used BPB format or the indicated file system type, that is, it is technically possible to use a "FAT32 EBPB" also for FAT12 and FAT16 volumes as well as a DOS 4.0 EBPB for small FAT32 volumes. Since such volumes were found to be created by Windows operating systems under some odd conditions,[nb 6] operating systems should be prepared to cope with these hybrid forms.
Sector offset | FAT32 EBPB offset | Length (bytes) | Contents |
---|---|---|---|
0x00B | 0x00 | 25 | DOS 3.31 BPB |
0x024 | 0x19 | 4 | Logical sectors per file allocation table (corresponds with the old entry at offset 0x0B in the DOS 2.0 BPB).
The byte at offset 0x026 in this entry should never become 0x28 or 0x29 in order to avoid any misinterpretation with the EBPB format under non-FAT32 aware operating systems. Fortunately, under normal circumstances (sector size of 512 bytes), this cannot happen, as a FAT32 file system has at most 0xffffff6 = 268435446 clusters. One Fat sector fits 512 / 4 = 128 cluster descriptors. So at most only ceil(268435446 / 128) = 2097152 = 0x200000 sectors would be needed, making third byte of the number of FAT sectors 0x20 at most, which is less than the forbidden 0x28 and 0x29 values. |
0x028 | 0x1D | 2 | Drive description / mirroring flags (bits 3-0: zero-based number of active FAT, if bit 7 set.[4] If bit 7 is clear, all FATs are mirrored as usual. Other bits reserved and should be 0.)
DR-DOS 7.07 FAT32 boot sectors with dual LBA and CHS support utilize bits 15-8 to store an access flag and part of a message. These bits contain either bit pattern 0110:1111b (low-case letter 'o', bit 13 set for CHS access) or 0100:1111b (upper-case letter 'O', bit 13 cleared for LBA access). The byte is also used for the second character in a potential "No␠IBMBIO␠␠COM" error message (see offset 0x034), displayed either in mixed or upper case, thereby indicating which access type failed). Formatting tools or non-DR SYS-type tools may clear these bits, but other disk tools should leave bits 15-8 unchanged. |
0x02A | 0x1F | 2 | Version (defined as 0.0). The high byte of the version number is stored at offset 0x02B, and the low byte at offset 0x02A.[4] FAT32 implementations should refuse to mount volumes with version numbers unknown by them. |
0x02C | 0x21 | 4 | Cluster number of root directory start, typically 2 (first cluster[33]) if it contains no bad sector. (Microsoft's FAT32 implementation imposes an artificial limit of 65,535 entries per directory, whilst many third-party implementations do not.)
A cluster value of 0 is not officially allowed and can never indicate a valid root directory start cluster. Some non-standard FAT32 implementations may treat it as an indicator to search for a fixed-sized root directory where it would be expected on FAT16 volumes; see offset 0x011. |
0x030 | 0x25 | 2 | Logical sector number of FS Information Sector, typically 1, i.e., the second of the three FAT32 boot sectors.
Some FAT32 implementations support a slight variation of Microsoft's specification in making the FS Information Sector optional by specifying a value of 0xFFFF[19] (or 0x0000) in this entry. Since logical sector 0 can never be a valid FS Information Sector, but FS Information Sectors use the same signature as found on many boot sectors [citation needed], file system implementations should never attempt to use logical sector 0 as FS Information sector and instead assume that the feature is unsupported on that particular volume. Without a FS Information Sector, the minimum allowed logical sector size of FAT32 volumes can be reduced downto 128 bytes for special purposes. |
0x032 | 0x27 | 2 | First logical sector number of a copy of the three FAT32 boot sectors, typically 6.[4]
Since DR-DOS 7.0x FAT32 formatted volumes use a single-sector boot sector, some volumes formatted under DR-DOS use a value of 2 here. Values of 0x0000[4] (and/or 0xFFFF[19]) are reserved and indicate that no backup sector is available. |
0x034 | 0x29 | 12 | Reserved (may be changed to format filler byte 0xF6[nb 7] as an artifact by MS-DOS FDISK , must be initialized to 0 by formatting tools, but must not be changed by file system implementations or disk tools later on.)
DR-DOS 7.07 FAT32 boot sectors use these 12 bytes to store the filename of the " |
0x040 | 0x35 | 1 | Cf. 0x024 for FAT12/FAT16 (Physical Drive Number)
exFAT BPBs are located at sector offset 0x040 to 0x077, overlapping all the remaining entries of a standard FAT32 EBPB including this one. They can be detected via their OEM label signature " |
0x041 | 0x36 | 1 | Cf. 0x025 for FAT12/FAT16 (Used for various purposes; see FAT12/FAT16)
May hold format filler byte 0xF6[nb 7] artifacts after partitioning with MS-DOS FDISK, but not yet formatted. |
0x042 | 0x37 | 1 | Cf. 0x026 for FAT12/FAT16 (Extended boot signature, 0x29)
Most FAT32 file system implementations do not support an alternative signature of 0x28[15] to indicate a shortened form of the FAT32 EBPB with only the serial number following (and no Volume Label and File system type entries), but since these 19 mostly unused bytes might serve different purposes in some scenarios, implementations should accept 0x28 as an alternative signature and then fall back to use the directory volume label in the file system instead of in the EBPB for compatibility with potential extensions. |
0x043 | 0x38 | 4 | Cf. 0x027 for FAT12/FAT16 (Volume ID) |
0x047 | 0x3C | 11 | Cf. 0x02B for FAT12/FAT16 (Volume Label)
Not available if the signature at offset 0x042 is set to 0x28. |
0x052 | 0x47 | 8 | Cf. 0x036 for FAT12/FAT16 (File system type, padded with blanks (0x20), e.g., "FAT32␠␠␠ ").
Not available if the signature at 0x042 is set to 0x28. If both total logical sectors entries at offset 0x020 and 0x013 are 0 on volumes using a FAT32 EBPB with signature 0x29, volumes with more than 4,294,967,295 (232-1) sectors (f.e. some DR-DOS volumes with 32-bit cluster entries) can use this entry as 64-bit total logical sectors entry instead. In this case, the OEM label at sector offset 0x003 may be retrieved as new-style file system type instead. |
Exceptions
[edit]Versions of DOS before 3.2 totally or partially relied on the media descriptor byte in the BPB or the FAT ID byte in cluster 0 of the first FAT in order to determine FAT12 diskette formats even if a BPB is present. Depending on the FAT ID found and the drive type detected they default to use one of the following BPB prototypes instead of using the values actually stored in the BPB.[nb 1]
Originally, the FAT ID was meant to be a bit flag with all bits set except for bit 2 cleared to indicate an 80 track (vs. 40 track) format, bit 1 cleared to indicate a 9 sector (vs. 8 sector) format, and bit 0 cleared to indicate a single-sided (vs. double-sided) format,[7] but this scheme was not followed by all OEMs and became obsolete with the introduction of hard disks and high-density formats. Also, the various 8-inch formats supported by 86-DOS and MS-DOS do not fit this scheme.
FAT ID (compare with media ID at BPB offset 0x0A)[22][23] | 0xFF | 0xFE | 0xFD | 0xFC | 0xFB | 0xFA | 0xF9 | 0xF8 | 0xF0 | 0xED | 0xE5 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | 8" | 5.25" | 8" | 8" | 5.25" | 8" | 8" | 5.25" | 5.25" | 5.25" / 3.5" | 5.25" / 3.5" | 5.25" | 3.5" | 3.5" | 5.25" | 5.25" / 3.5" | 3.5" | 3.5" | 3.5" | 5.25" | 8" |
Density | ? | DD 48tpi | SD | DD | DD 48tpi | SD | SD | DD 48tpi | DD 48tpi | ? | ? | HD 96tpi | DD 135tpi | HD 135tpi | QD 96tpi | ? | DD | HD 135tpi | ED | QD 96tpi | SD |
Modulation | ? | MFM | FM | MFM | MFM | FM | FM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | MFM | FM |
Formatted capacity (KB) | ? | 320 | 250 ("old")[28][32] | 1200 | 160 | 250 ("new")[28][32] | 500 | 360 | 180 | 640 | 320 | 1200 | 720 | 1440 | 720 | 360 | 360 | 1440 | 2880 | 720 | 243 / 250 |
Cylinders (CHS) | 77 | 40 | 77 | 77 | 40 | 77 | 77 | 40 | 40 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 80 | 77 |
Physical sectors / track (BPB offset 0x0D) |
? | 8 | 26 | 8 | 8 | 26 | 26 | 9 | 9 | 8 | 8 | 15 | 9 | 18 | 9 (8[31]) | 9 | 9 | 18 | 36 | 9 (8[31]) | 26 |
Number of heads (BPB offset 0x0F) |
? | 2 | 1[28][32] | 2[7][22][32] (1) | 1 | 1[7][28][32] | 2[22] | 2 | 1 | 2 | 1 | 2 | 2 | 2 | 2 | 1 | 1 | 2 | 2 | 2 | 1 |
Byte payload / physical sector | ? | 512 | 128 | 1024 | 512 | 128 | 128 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 128 |
Bytes / logical sector (BPB offset 0x00) |
? | 512 | 128 | 1024 | 512 | 128 | 128 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 512 | 128 |
Logical sectors / cluster (BPB offset 0x02) |
? | 2 | 4 | 1 | 1 | 4 | 4 | 2 | 1 | 2 | 1[22] (2?[7]) | 1 | 2 | 1 | ? | 2 | ? | 1 | 2 | ? | 4 |
Reserved logical sectors (BPB offset 0x03) |
? | 1 | 1[28][32] | 1 | 1 | 4[28][32] | 4 | 1 | 1 | 1 | 1 | 1 | 1 (2) | 1 | 1 | 1 | 1 | 1 | 1 | ? | 1 |
Number of FATs (BPB offset 0x05) |
? | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Root directory entries (BPB offset 0x06) |
? | 112 (7 sectors) | 68 (17 sectors) | 192 (6 sectors) | 64 (4 sectors) | 68 (17 sectors) | 68 (17 sectors) | 112 (7 sectors) | 64 (4 sectors) | 112 (7 sectors) | 112 (7 sectors) | 224 (14 sectors) | 112 (7 sectors) | 224 (14 sectors) | ? | 112 (7 sectors) | ? | 224 (14 sectors) | 240 (15 sectors) | ? | 64 (16 sectors) |
Total logical sectors (BPB offset 0x08) |
? | 640 | 2002[28][32] | 1232[22][32] (616[7]) | 320 | 2002[7][28][32] | 4004[22] | 720 | 360 | 1280 | 640 | 2400 | 1440 | 2880 | ? | 720 | ? | 2880 | 5760 | ? | 2002 |
Logical sectors / FAT (BPB offset 0x0B) |
? | 1 | 6[28][32] | 2 | 1 | 6[28][32] | 6?[22] | 2 | 2 | 2 | 2[22] (1?[7]) | 7 | 3 | 9 (7) | ? | 2 | ? | 9 | 9 | ? | 1 |
Hidden sectors (BPB offset 0x11) |
? | 0 | 3[22] (0[7]) | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | ? | 0 |
Total number of clusters | ? | 315 | 497 | 1227 | 313 | ? | 997?[22] | 354 | 351 | ? | ? | 2371 | 713 | 2847? | ? | ? | ? | 2847 | 2863 | ? | ? |
Logical sector order | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? |
Sector mapping | ? | sector+ head+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
? | sector+ track+ |
sector+ track+ |
sector+ head+ track+ |
sector+ head+ track+ |
? | sector+ track+
|
First physical sector (CHS) | ? | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ? | ? | 1 | 1 | 1 | ? | 1 | ? | 1 | 1 | ? | 1 |
DRIVER.SYS /F:n
|
? | 0 | 3 | 4 | 0 | ? | 3 | 0 | 0 | ? | ? | 1 | 2 | 7 | ? | ? | ? | 7 | 9 | ? | 3 |
BPB Presence | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | ? | Yes | Yes | Yes | ? | ? | ? | Yes | Yes | ? | ? |
Support | ? | DOS 1.1[32]
|
DOS 2.0
|
DOS 1.0[32]
|
?[28][32] | DOS 2.0
|
DOS 2.0
|
DOS 2.0
|
? | ? | DOS 3.0
|
DOS 3.2
|
DOS 3.2 only;
(DR-DOS) |
Sanyo 55x
DS-DOS 2.11 only |
MS-DOS 3.1[7]
|
MSX-DOS
|
DOS 3.3
|
DOS 5.0
|
Tandy 2000 only
|
DR-DOS only
|
Microsoft recommends to distinguish between the two 8-inch formats for FAT ID 0xFE by trying to read of a single-density address mark. If this results in an error, the medium must be double-density.[23]
The table does not list a number of incompatible 8-inch and 5.25-inch FAT12 floppy formats supported by 86-DOS, which differ either in the size of the directory entries (16 bytes vs. 32 bytes) or in the extent of the reserved sectors area (several whole tracks vs. one logical sector only).
The implementation of a single-sided 315 KB FAT12 format used in MS-DOS for the Apricot PC and F1e[34] had a different boot sector layout, to accommodate that computer's non-IBM compatible BIOS. The jump instruction and OEM name were omitted, and the MS-DOS BPB parameters (offsets 0x00B-0x017 in the standard boot sector) were located at offset 0x050. The Portable, F1, PC duo and Xi FD supported a non-standard double-sided 720 KB FAT12 format instead.[34] The differences in the boot sector layout and media IDs made these formats incompatible with many other operating systems. The geometry parameters for these formats are:
- 315 KB: Bytes per logical sector: 512 bytes, logical sectors per cluster: 1, reserved logical sectors: 1, number of FATs: 2, root directory entries: 128, total logical sectors: 630, FAT ID: 0xFC, logical sectors per FAT: 2, physical sectors per track: 9, number of heads: 1.[34][35]
- 720 KB: Bytes per logical sector: 512 bytes, logical sectors per cluster: 2, reserved logical sectors: 1, number of FATs: 2, root directory entries: 176, total logical sectors: 1440, FAT ID: 0xFE, logical sectors per FAT: 3, physical sectors per track: 9, number of heads: 2.[34]
Later versions of Apricot MS-DOS gained the ability to read and write disks with the standard boot sector in addition to those with the Apricot one. These formats were also supported by DOS Plus 2.1e/g for the Apricot ACT series.
The DOS Plus adaptation for the BBC Master 512 supported two FAT12 formats on 80-track, double-sided, double-density 5.25" drives, which did not use conventional boot sectors at all. 800 KB data disks omitted a boot sector and began with a single copy of the FAT.[35] The first byte of the relocated FAT in logical sector 0 was used to determine the disk's capacity. 640 KB boot disks began with a miniature ADFS file system containing the boot loader, followed by a single FAT.[35][36] Also, the 640 KB format differed by using physical CHS sector numbers starting with 0 (not 1, as common) and incrementing sectors in the order sector-track-head (not sector-head-track, as common).[36] The FAT started at the beginning of the next track. These differences make these formats unrecognizable by other operating systems. The geometry parameters for these formats are:
- 800 KB: Bytes per logical sector: 1024 bytes, logical sectors per cluster: 1, reserved logical sectors: 0, number of FATs: 1, root directory entries: 192, total logical sectors: 800, FAT ID: 0xFD, logical sectors per FAT: 2, physical sectors per track: 5, number of heads: 2.[35][36]
- 640 KB: Bytes per logical sector: 256 bytes, logical sectors per cluster: 8, reserved logical sectors: 16, number of FATs: 1, root directory entries: 112, total logical sectors: 2560, FAT ID: 0xFF, logical sectors per FAT: 2, physical sectors per track: 16, number of heads: 2.[35][36]
DOS Plus for the Master 512 could also access standard PC disks formatted to 180 KB or 360 KB, using the first byte of the FAT in logical sector 1 to determine the capacity.
The DEC Rainbow 100 (all variations) supported one FAT12 format on 80-track, single-sided, quad-density 5.25" drives. The first two tracks were reserved for the boot loader, but didn't contain an MBR nor a BPB (MS-DOS used a static in-memory BPB instead). The boot sector (track 0, side 0, sector 1) was Z80 code beginning with DI 0xF3. The 8088 bootstrap was loaded by the Z80. Track 1, side 0, sector 2 starts with the Media/FAT ID byte 0xFA. Unformatted disks use 0xE5 instead. The file system starts on track 2, side 0, sector 1. There are 2 copies of the FAT and 96 entries in the root directory. In addition, there is a physical to logical track mapping to effect a 2:1 sector interleaving. The disks were formatted with the physical sectors in order numbered 1 to 10 on each track after the reserved tracks, but the logical sectors from 1 to 10 were stored in physical sectors 1, 6, 2, 7, 3, 8, 4, 9, 5, 10.[37]
FS Information Sector
[edit]The "FS Information Sector" was introduced in FAT32[38] for speeding up access times of certain operations (in particular, getting the amount of free space). It is located at a logical sector number specified in the FAT32 EBPB boot record at position 0x030 (usually logical sector 1, immediately after the boot record itself).
Byte offset | Length (bytes) | Contents |
---|---|---|
0x000 | 4 | FS information sector signature (0x52 0x52 0x61 0x41 = "RRaA ")
For as long as the FS Information Sector is located in logical sector 1, the location, where the FAT typically started in FAT12 and FAT16 file systems (with only one reserved sectors), the presence of this signature ensures that early versions of DOS will never attempt to mount a FAT32 volume, as they expect the values in cluster 0 and cluster 1 to follow certain bit patterns, which are not met by this signature. |
0x004 | 480 | Reserved (byte values should be set to 0x00 during format, but not be relied upon and never changed later on) |
0x1E4 | 4 | FS information sector signature (0x72 0x72 0x41 0x61 = "rrAa ")
|
0x1E8 | 4 | Last known number of free data clusters on the volume, or 0xFFFFFFFF if unknown. Should be set to 0xFFFFFFFF during format and updated by the operating system later on. Must not be absolutely relied upon to be correct in all scenarios. Before using this value, the operating system should sanity check this value to be less than or equal to the volume's count of clusters. |
0x1EC | 4 | Number of the most recently known to be allocated data cluster. Should be set to 0xFFFFFFFF during format and updated by the operating system later on. With 0xFFFFFFFF the system should start at cluster 0x00000002. Must not be absolutely relied upon to be correct in all scenarios. Before using this value, the operating system should sanity check this value to be a valid cluster number on the volume. |
0x1F0 | 12 | Reserved (byte values should be set to 0x00 during format, but not be relied upon and never changed later on) |
0x1FC | 4 | FS information sector signature (0x00 0x00 0x55 0xAA)[4][nb 2] (All four bytes should match before the contents of this sector should be assumed to be in valid format.) |
The sector's data may be outdated and not reflect the current media contents, because not all operating systems update or use this sector, and even if they do, the contents is not valid when the medium has been ejected without properly unmounting the volume or after a power-failure. Therefore, operating systems should first inspect a volume's optional shutdown status bitflags residing in the FAT entry of cluster 1 or the FAT32 EBPB at offset 0x041 and ignore the data stored in the FS information sector, if these bitflags indicate that the volume was not properly unmounted before. This does not cause any problems other than a possible speed penalty for the first free space query or data cluster allocation; see fragmentation.
If this sector is present on a FAT32 volume, the minimum allowed logical sector size is 512 bytes, whereas otherwise it would be 128 bytes. Some FAT32 implementations support a slight variation of Microsoft's specification by making the FS information sector optional by specifying a value of 0xFFFF[19] (or 0x0000) in the entry at offset 0x030.
FAT region
[edit]File Allocation Table
[edit]
Cluster map
[edit]This article may overuse or misuse color, making it hard to understand for color-blind users. |
A volume's data area is divided into identically sized clusters—small blocks of contiguous space. Cluster sizes vary depending on the type of FAT file system being used and the size of the drive; typical cluster sizes range from 2 to 32 KiB.[39]
Each file may occupy one or more clusters depending on its size. Thus, a file is represented by a chain of clusters (referred to as a singly linked list). These clusters are not necessarily stored adjacent to one another on the disk's surface but are often instead fragmented throughout the Data Region.
Each version of the FAT file system uses a different size for FAT entries. Smaller numbers result in a smaller FAT, but waste space in large partitions by needing to allocate in large clusters.
The FAT12 file system uses 12 bits per FAT entry, thus two entries span 3 bytes. It is consistently little-endian: if those three bytes are considered as one little-endian 24-bit number, the 12 least significant bits represent the first entry (e.g. cluster 0) and the 12 most significant bits the second (e.g. cluster 1). In other words, while the low eight bits of the first cluster in the row are stored in the first byte, the top four bits are stored in the low nibble of the second byte, whereas the low four bits of the subsequent cluster in the row are stored in the high nibble of the second byte and its higher eight bits in the third byte.
Offset | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7 | +8 | +9 | +A | +B | +C | +D | +E | +F |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
+0000 | F0 | FF | FF | 03 | 40 | 00 | 05 | 60 | 00 | 07 | 80 | 00 | FF | AF | 00 | 14 |
+0010 | C0 | 00 | 0D | E0 | 00 | 0F | 00 | 01 | 11 | F0 | FF | 00 | F0 | FF | 15 | 60 |
+0020 | 01 | 19 | 70 | FF | F7 | AF | 01 | FF | 0F | 00 | 00 | 70 | FF | 00 | 00 | 00 |
- FAT ID / endianness marker (in reserved cluster #0), with 0xF0 indicating a volume on a non-partitioned superfloppy drive (must be 0xF8 for partitioned disks)
- End of chain indicator / maintenance flags (in reserved cluster #1)
- Second chain (7 clusters) for a non-fragmented file (here: #2, #3, #4, #5, #6, #7, #8)
- Third chain (7 clusters) for a fragmented, possibly grown file (here: #9, #A, #14, #15, #16, #19, #1A)
- Fourth chain (7 clusters) for a non-fragmented, possibly truncated file (here: #B, #C, #D, #E, #F, #10, #11)
- Empty clusters (here: #12, #1B, #1C, #1E, #1F)
- Fifth chain (1 cluster) for a sub-directory (here: #13)
- Bad clusters (3 clusters) (here: #17, #18, #1D)
The FAT16 file system uses 16 bits per FAT entry, thus one entry spans two bytes in little-endian byte order:
Offset | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7 | +8 | +9 | +A | +B | +C | +D | +E | +F |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
+0000 | F0 | FF | FF | FF | 03 | 00 | 04 | 00 | 05 | 00 | 06 | 00 | 07 | 00 | 08 | 00 |
+0010 | FF | FF | 0A | 00 | 14 | 00 | 0C | 00 | 0D | 00 | 0E | 00 | 0F | 00 | 10 | 00 |
+0020 | 11 | 00 | FF | FF | 00 | 00 | FF | FF | 15 | 00 | 16 | 00 | 19 | 00 | F7 | FF |
+0030 | F7 | FF | 1A | 00 | FF | FF | 00 | 00 | 00 | 00 | F7 | FF | 00 | 00 | 00 | 00 |
The FAT32 file system uses 32 bits per FAT entry, thus one entry spans four bytes in little-endian byte order. The four top bits of each entry are reserved for other purposes; they are cleared during formatting and should not be changed otherwise. They must be masked off before interpreting the entry as 28-bit cluster address.
Offset | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7 | +8 | +9 | +A | +B | +C | +D | +E | +F |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
+0000 | F0 | FF | FF | 0F | FF | FF | FF | 0F | FF | FF | FF | 0F | 04 | 00 | 00 | 00 |
+0010 | 05 | 00 | 00 | 00 | 06 | 00 | 00 | 00 | 07 | 00 | 00 | 00 | 08 | 00 | 00 | 00 |
+0020 | FF | FF | FF | 0F | 0A | 00 | 00 | 00 | 14 | 00 | 00 | 00 | 0C | 00 | 00 | 00 |
+0030 | 0D | 00 | 00 | 00 | 0E | 00 | 00 | 00 | 0F | 00 | 00 | 00 | 10 | 00 | 00 | 00 |
+0040 | 11 | 00 | 00 | 00 | FF | FF | FF | 0F | 00 | 00 | 00 | 00 | FF | FF | FF | 0F |
+0050 | 15 | 00 | 00 | 00 | 16 | 00 | 00 | 00 | 19 | 00 | 00 | 00 | F7 | FF | FF | 0F |
+0060 | F7 | FF | FF | 0F | 1A | 00 | 00 | 00 | FF | FF | FF | 0F | 00 | 00 | 00 | 00 |
+0070 | 00 | 00 | 00 | 00 | F7 | FF | FF | 0F | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
- First chain (1 cluster) for the root directory, pointed to by an entry in the FAT32 BPB (here: #2)
- Second chain (6 clusters) for a non-fragmented file (here: #3, #4, #5, #6, #7, #8)
The File Allocation Table (FAT) is a contiguous number of sectors immediately following the area of reserved sectors. It represents a list of entries that map to each cluster on the volume. Each entry records one of four things:
- the cluster number of the next cluster in a chain
- a special end of cluster-chain (EOC) entry that indicates the end of a chain
- a special entry to mark a bad cluster
- a zero to note that the cluster is unused
For very early versions of DOS to recognize the file system, the system must have been booted from the volume or the volume's FAT must start with the volume's second sector (logical sector 1 with physical CHS address 0/0/2 or LBA address 1), that is, immediately following the boot sector. Operating systems assume this hard-wired location of the FAT in order to find the FAT ID in the FAT's cluster 0 entry on DOS 1.0-1.1 FAT diskettes, where no valid BPB is found.
Special entries
[edit]The first two entries in a FAT store special values:
The first entry (cluster 0 in the FAT) holds the FAT ID since MS-DOS 1.20 and PC DOS 1.1 (allowed values 0xF0-0xFF with 0xF1-0xF7 reserved) in bits 7-0, which is also copied into the BPB of the boot sector, offset 0x015 since DOS 2.0. The remaining 4 bits (if FAT12), 8 bits (if FAT16) or 20 bits (if FAT32, the 4 MSB bits are zero) of this entry are always 1. These values were arranged so that the entry would also function as a "trap-all" end-of-chain marker for all data clusters holding a value of zero. Additionally, for FAT IDs other than 0xFF (and 0x00) it is possible to determine the correct nibble and byte order (to be) used by the file system driver, however, the FAT file system officially uses a little-endian representation only and there are no known implementations of variants using big-endian values instead. 86-DOS 0.42 up to MS-DOS 1.14 used hard-wired drive profiles instead of a FAT ID, but used this byte to distinguish between media formatted with 32-byte or 16-byte directory entries, as they were used prior to 86-DOS 0.42.
The second entry (cluster 1 in the FAT) nominally stores the end-of-cluster-chain marker as used by the formater, but typically always holds 0xFFF / 0xFFFF / 0x0FFFFFFF, that is, with the exception of bits 31-28 on FAT32 volumes these bits are normally always set. Some Microsoft operating systems, however, set these bits if the volume is not the volume holding the running operating system (that is, use 0xFFFFFFFF instead of 0x0FFFFFFF here).[40] (In conjunction with alternative end-of-chain markers the lowest bits 2-0 can become zero for the lowest allowed end-of-chain marker 0xFF8 / 0xFFF8 / 0x?FFFFFF8; bit 3 should be reserved as well given that clusters 0xFF0 / 0xFFF0 / 0x?FFFFFF0 and higher are officially reserved. Some operating systems may not be able to mount some volumes if any of these bits are not set, therefore the default end-of-chain marker should not be changed.) For DOS 1 and 2, the entry was documented as reserved for future use.
Since DOS 7.1 the two most-significant bits of this cluster entry may hold two optional bitflags representing the current volume status on FAT16 and FAT32, but not on FAT12 volumes. These bitflags are not supported by all operating systems, but operating systems supporting this feature would set these bits on shutdown and clear the most significant bit on startup:
If bit 15 (on FAT16) or bit 27 (on FAT32)[41] is not set when mounting the volume, the volume was not properly unmounted before shutdown or ejection and thus is in an unknown and possibly "dirty" state.[27] On FAT32 volumes, the FS Information Sector may hold outdated data and thus should not be used. The operating system would then typically run SCANDISK or CHKDSK on the next startup[nb 9][41] (but not on insertion of removable media) to ensure and possibly reestablish the volume's integrity.
If bit 14 (on FAT16) or bit 26 (on FAT32)[41] is cleared, the operating system has encountered disk I/O errors on startup,[41] a possible indication for bad sectors. Operating systems aware of this extension will interpret this as a recommendation to carry out a surface scan (SCANDISK) on the next boot.[27][41] (A similar set of bitflags exists in the FAT12/FAT16 EBPB at offset 0x1A or the FAT32 EBPB at offset 0x36. While the cluster 1 entry can be accessed by file system drivers once they have mounted the volume, the EBPB entry is available even when the volume is not mounted and thus easier to use by disk block device drivers or partitioning tools.)
If the number of FATs in the BPB is not set to 2, the second cluster entry in the first FAT (cluster 1) may also reflect the status of a TFAT volume for TFAT-aware operating systems. If the cluster 1 entry in that FAT holds the value 0, this may indicate that the second FAT represents the last known valid transaction state and should be copied over the first FAT, whereas the first FAT should be copied over the second FAT if all bits are set.
Some non-standard FAT12/FAT16 implementations utilize the cluster 1 entry to store the starting cluster of a variable-sized root directory (typically 2[33]). This may occur when the number of root directory entries in the BPB holds a value of 0 and no FAT32 EBPB is found (no signature 0x29 or 0x28 at offset 0x042).[20] This extension, however, is not supported by mainstream operating systems,[20] as it conflicts with other possible uses of the cluster 1 entry. Most conflicts can be ruled out if this extension is only allowed for FAT12 with less than 0xFEF and FAT16 volumes with less than 0x3FEF clusters and 2 FATs.
Because these first two FAT entries store special values, there are no data clusters 0 or 1. The first data cluster (after the root directory if FAT12/FAT16) is cluster 2,[33] marking the beginning of the data area.
Cluster values
[edit]FAT entry values:
FAT12 | FAT16 | FAT32 | Description |
---|---|---|---|
0x000 | 0x0000 | 0x?0000000 | Free Cluster; also used by DOS to refer to the parent directory starting cluster in ".." entries of subdirectories of the root directory on FAT12/FAT16 volumes.[42][6]
Otherwise, if this value occurs in cluster chains (e.g. in directory entries of zero length or deleted files), file system implementations should treat this like an end-of-chain marker.[7] |
0x001 | 0x0001 | 0x?0000001 | Reserved for internal purposes; MS-DOS/PC DOS use this cluster value as a temporary non-free cluster indicator while constructing cluster chains during file allocation (only seen on disk if there is a crash or power failure in the middle of this process).[42][6]
If this value occurs in on-disk cluster chains, file system implementations should treat this like an end-of-chain marker. |
0x002 - 0xFEF | 0x0002 - 0xFFEF (0x0002 - 0x7FFF) | 0x?0000002 - 0x?FFFFFEF | Used as data clusters; value points to next cluster. MS-DOS/PC DOS accept values up to 0xFEF / 0xFFEF / 0x0FFFFFEF (sometimes more; see below), whereas for Atari GEMDOS only values up to 0x7FFF are allowed on FAT16 volumes. |
0xFF0[nb 10] - 0xFF5 (0xFF1 - 0xFF5) | 0xFFF0 - 0xFFF5 | 0x?FFFFFF0 - 0x?FFFFFF5 | Reserved in some contexts,[43] or also used[24][25][26][4][44] as data clusters in some non-standard systems. Volume sizes which would utilize these values as data clusters should be avoided, but if these values occur in existing volumes, the file system must treat them as normal data clusters in cluster-chains (ideally applying additional sanity checks), similar to what MS-DOS, PC DOS and DR-DOS do,[6] and should avoid allocating them for files otherwise.
MS-DOS/PC DOS 3.3 and higher treats a value of 0xFF0[nb 10][6] on FAT12 (but not on FAT16 or FAT32) volumes as additional end-of-chain marker similar to 0xFF8-0xFFF.[6] For compatibility with MS-DOS/PC DOS, file systems should avoid to use data cluster 0xFF0 in cluster chains on FAT12 volumes (that is, treat it as a reserved cluster similar to 0xFF7). (NB. The correspondence of the low byte of the cluster number with the FAT ID and media descriptor values is the reason, why these cluster values are reserved.) |
0xFF6 | 0xFFF6 | 0x?FFFFFF6 | Reserved; do not use.[24][25][26][4][21][44] (NB. Corresponds with the default format filler value 0xF6 on IBM compatible machines.) Volumes should not be created which would utilize this value as data cluster, but if this value occurs in existing volumes, the file system must treat it as normal data cluster in cluster-chains (ideally applying additional sanity checks), and should avoid to allocate it for files otherwise.[7] |
0xFF7 | 0xFFF7 | 0x?FFFFFF7 | Bad sector in cluster or reserved cluster (since DOS 2.0).
The cutover values for the maximum number of clusters for FAT12 and FAT16 file systems are defined as such that the highest possible data cluster values (0xFF5 and 0xFFF5,[6] respectively) will always be smaller than this value.[6] Therefore, this value cannot normally occur in cluster-chains, but if it does, it may be treated as a normal data cluster, since 0xFF7 could have been a non-standard data cluster on FAT12 volumes before the introduction of the bad cluster marker with DOS 2.0 or the introduction of FAT16 with DOS 3.0,[7] and 0xFFF7 could have been a non-standard data cluster on FAT16 volumes before the introduction of FAT32 with DOS 7.10. Theoretically, 0x0FFFFFF7 can be part of a valid cluster chain on FAT32 volumes, but disk utilities should avoid creating FAT32 volumes, where this condition could occur. The file system should avoid to allocate this cluster for files.[7] Disk utilities must not attempt to restore "lost clusters" holding this value in the FAT, but count them as bad clusters. |
0xFF8 - 0xFFF (and optionally 0xFF0;[nb 10] see note) | 0xFFF8 - 0xFFFF | 0x?FFFFFF8 - 0x?FFFFFFF | Last cluster in file (EOC). File system implementations must treat all these values as end-of-chain marker at the same time.[7] Most file system implementations (including 86-DOS, MS-DOS, PC DOS and DR-DOS) use 0xFFF[7] / 0xFFFF[7] / 0x0FFFFFFF as end-of-file marker when allocating files, but versions of Linux before 2.5.40 used 0xFF8 / 0xFFF8 / 0x0FFFFFF8.[45] Versions of mkdosfs (dosfstools up to 3.0.26) continue to use 0x0FFFFFF8 for the root directory on FAT32 volumes, whereas some disk repair and defragment tools utilize other values in the set (e.g., SCANDISK may use 0xFF8 / 0xFFF8 / 0x0FFFFFF8 instead). While in the original 8-bit FAT implementation in Microsoft's Standalone Disk BASIC different end markers (0xC0..0xCD) were used to indicate the number of sectors (0 to 13) used up in the last cluster occupied by a file, different end markers were repurposed under DOS to indicate different types of media,[7] with the currently used end marker indicated in the cluster 1 entry, however, this concept does not seem to have been broadly utilized in practice—and to the extent that in some scenarios volumes may not be recognized by some operating systems, if some of the low-order bits of the value stored in cluster 1 are not set. Also, some faulty file system implementations only accept 0xFFF / 0xFFFF / 0x?FFFFFFF as valid end-of-chain marker.
File system implementations should check cluster values in cluster-chains against the maximum allowed cluster value calculated by the actual size of the volume and treat higher values as if they were end-of-chain markers as well. (The low byte of the cluster number conceptually corresponds with the FAT ID and media descriptor values;[7] see note above for MS-DOS/PC DOS special usage of 0xFF0[nb 10] on FAT12 volumes.[6]) |
FAT32 uses 28 bits for cluster numbers. The remaining 4 bits in the 32-bit FAT entry are usually zero, but are reserved and should be left untouched. A standard conformant FAT32 file system driver or maintenance tool must not rely on the upper 4 bits to be zero and it must strip them off before evaluating the cluster number in order to cope with possible future expansions where these bits may be used for other purposes. They must not be cleared by the file system driver when allocating new clusters, but should be cleared during a reformat.
Root directory region
[edit]The root directory table in FAT12 and FAT16 file systems occupies the special Root Directory Region location.
Data region
[edit]Aside from the root directory table in FAT12 and FAT16 file systems, which occupies the special Root Directory Region location, all directory tables are stored in the data region. The actual number of entries in a directory stored in the data region can grow by adding another cluster to the chain in the FAT.
Directory table
[edit]A directory table is a special type of file that represents a directory (also known as a folder). Since 86-DOS 0.42,[46] each file or (since MS-DOS 1.40 and PC DOS 2.0) subdirectory stored within it is represented by a 32-byte entry in the table. Each entry records the name, extension, attributes (archive, directory, hidden, read-only, system and volume), the address of the first cluster of the file/directory's data, the size of the file/directory, and the date[46] and (since PC DOS 1.1) also the time of last modification. Earlier versions of 86-DOS used 16-byte directory entries only, supporting no files larger than 16 MB and no time of last modification.[46]
The FAT file system itself does not impose any limits on the depth of a subdirectory tree for as long as there are free clusters available to allocate the subdirectories, however, the internal Current Directory Structure (CDS) under MS-DOS/PC DOS limits the absolute path of a directory to 66 characters (including the drive letter, but excluding the NUL byte delimiter),[24][25][26] thereby limiting the maximum supported depth of subdirectories to 32, whatever occurs earlier. Concurrent DOS, Multiuser DOS and DR DOS 3.31 to 6.0 (up to including the 1992-11 updates) do not store absolute paths to working directories internally and therefore do not show this limitation.[47] The same applies to Atari GEMDOS, but the Atari Desktop does not support more than 8 sub-directory levels. Most applications aware of this extension support paths up to at least 127 bytes. FlexOS, 4680 OS and 4690 OS support a length of up to 127 bytes as well, allowing depths down to 60 levels.[48] PalmDOS, DR DOS 6.0 (since BDOS 7.1) and higher, Novell DOS, and OpenDOS sport a MS-DOS-compatible CDS and therefore have the same length limits as MS-DOS/PC DOS.
Each entry can be preceded by "fake entries" to support a VFAT long filename (LFN); see further below.
Legal characters for DOS short filenames include the following:
- Upper case letters
A
–Z
- Numbers
0
–9
- Space (though trailing spaces in either the base name or the extension are considered to be padding and not a part of the file name; also filenames with space in them could not easily be used on the DOS command line prior to Windows 95 because of the lack of a suitable escaping system). Another exception are the internal commands
MKDIR
/MD
andRMDIR
/RD
under DR-DOS which accept single arguments and therefore allow spaces to be entered. ! # $ % & ' ( ) - @ ^ _ ` { } ~
- Characters 128–228
- Characters 230–255
This excludes the following ASCII characters:
" * / : < > ? \ |
Windows/MS-DOS has no shell escape character+ , . ; = [ ]
Allowed in long file names only- Lower case letters
a
–z
Stored asA
–Z
; allowed in long file names - Control characters 0–31
- Character 127 (DEL)
Character 229 (0xE5) was not allowed as first character in a filename in DOS 1 and 2 due to its use as free entry marker. A special case was added to circumvent this limitation with DOS 3.0 and higher.
The following additional characters are allowed on Atari's GEMDOS, but should be avoided for compatibility with MS-DOS/PC DOS:
" + , ; < = > [ ] |
The semicolon (;
) should be avoided in filenames under DR DOS 3.31 and higher, PalmDOS, Novell DOS, OpenDOS, Concurrent DOS, Multiuser DOS, System Manager and REAL/32, because it may conflict with the syntax to specify file and directory passwords: "...\DIRSPEC.EXT;DIRPWD\FILESPEC.EXT;FILEPWD
". The operating system will strip off one[47] (and also two—since DR-DOS 7.02) semicolons and pending passwords from the filenames before storing them on disk. (The command processor 4DOS uses semicolons for include lists and requires the semicolon to be doubled for password protected files with any commands supporting wildcards.[47])
The at-sign character (@
) is used for filelists by many DR-DOS, PalmDOS, Novell DOS, OpenDOS and Multiuser DOS, System Manager and REAL/32 commands, as well as by 4DOS and may therefore sometimes be difficult to use in filenames.[47]
Under Multiuser DOS and REAL/32, the exclamation mark (!) is not a valid filename character since it is used to separate multiple commands in a single command line.[47]
Under IBM 4680 OS and 4690 OS, the following characters are not allowed in filenames:
? * : . ; , [ ] ! + = < > " - / \ |
Additionally, the following special characters are not allowed in the first, fourth, fifth and eight character of a filename, as they conflict with the host command processor (HCP) and input sequence table build file names:
@ # ( ) { } $ &
The DOS file names are in the current OEM character set: this can have surprising effects if characters handled in one way for a given code page are interpreted differently for another code page (DOS command CHCP
) with respect to lower and upper case, sorting, or validity as file name character.
Directory entry
[edit]Before Microsoft added support for long filenames and creation/access time stamps, bytes 0x0C–0x15 of the directory entry were used by other operating systems to store additional metadata, most notably the operating systems of the Digital Research family stored file passwords, access rights, owner IDs, and file deletion data there. While Microsoft's newer extensions are not fully compatible with these extensions by default, most of them can coexist in third-party FAT implementations (at least on FAT12 and FAT16 volumes).
32-byte directory entries, both in the Root Directory Region and in subdirectories, are of the following format (see also 8.3 filename):
Byte offset | Length (bytes) | Contents | ||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0x00 | 8 | Short file name (padded with spaces)
The first byte can have the following special values:
Versions of DOS prior to 5.0 start scanning directory tables from the top of the directory table to the bottom. In order to increase chances for successful file undeletion, DOS 5.0 and higher will remember the position of the last written directory entry and use this as a starting point for directory table scans. | ||||||||||||||||||||||||||||||||||||||||||
0x08 | 3 | Short file extension (padded with spaces) | ||||||||||||||||||||||||||||||||||||||||||
0x0B | 1 | File Attributes
Under DR DOS 6.0 and higher, including PalmDOS, Novell DOS and OpenDOS, the volume attribute is set for pending delete files and directories under DELWATCH. An attribute combination of 0x0F is used to designate a VFAT long file name entry since MS-DOS 7.0. Older versions of DOS can mistake this for a directory volume label, as they take the first entry with volume attribute set as volume label. This problem can be avoided if a directory volume label is enforced as part of the format process; for this reason some disk tools explicitly write dummy " | ||||||||||||||||||||||||||||||||||||||||||
0x0C | 1 |
| ||||||||||||||||||||||||||||||||||||||||||
0x0D | 1 |
Double usage for create time ms and file char does not create a conflict, since the creation time is no longer important for deleted files. | ||||||||||||||||||||||||||||||||||||||||||
0x0E | 2 |
If bits 15-11 > 23 or bits 10-5 > 59 or bits 4-0 > 29 here, or when bits 12-0 at offset 0x14 hold an access bitmap and this is not a FAT32 volume or a volume using OS/2 Extended Attributes, then this entry actually holds a password hash, otherwise it can be assumed to be a file creation time. | ||||||||||||||||||||||||||||||||||||||||||
0x10 | 2 |
The usage for creation date for existing files does not conflict with last modified time for deleted files because they are never used at the same time. For the same reason, the usage for the record size of existing files and last modified time of deleted files does not conflict. Creation dates and record sizes cannot be used at the same time, however, both are stored only on file creation and never changed later on, thereby limiting the conflict to FlexOS, 4680 OS and 4690 OS systems accessing files created under foreign operating systems as well as potential display or file sorting problems on systems trying to interpret a record size as creation time. To avoid the conflict, the storage of creation dates should be an optional feature of operating systems supporting it. | ||||||||||||||||||||||||||||||||||||||||||
0x12 | 2 |
The usage for the owner IDs of existing files does not conflict with last modified date stamp for deleted files because they are never used at the same time.[47] The usage of the last modified date stamp for deleted files does not conflict with access date since access dates are no longer important for deleted files. However, owner IDs and access dates cannot be used at the same time. | ||||||||||||||||||||||||||||||||||||||||||
0x14 | 2 |
The storage of the high two bytes of the first cluster in a file on FAT32 partially conflicts with access rights bitmaps. | ||||||||||||||||||||||||||||||||||||||||||
0x16 | 2 |
| ||||||||||||||||||||||||||||||||||||||||||
0x18 | 2 |
| ||||||||||||||||||||||||||||||||||||||||||
0x1A | 2 | Start of file in clusters in FAT12 and FAT16. Low two bytes of first cluster in FAT32; with the high two bytes stored at offset 0x14.
Entries with the Volume Label flag, subdirectory ".." pointing to the FAT12 and FAT16 root, and empty files with size 0 should have first cluster 0. VFAT LFN entries also have this entry set to 0; on FAT12 and FAT16 volumes this can be used as part of a detection mechanism to distinguish between pending delete files under DELWATCH and VFAT LFNs; see above. | ||||||||||||||||||||||||||||||||||||||||||
0x1C | 4 | File size in bytes. Entries with the Volume Label or Subdirectory flag set should have a size of 0.
VFAT LFN entries never store the value 0x00000000 here. This can be used as part of a detection mechanism to distinguish between pending delete files under DELWATCH and VFAT LFNs; see above. |
The FlexOS-based operating systems IBM 4680 OS and IBM 4690 OS support unique distribution attributes stored in some bits of the previously reserved areas in the directory entries:[62]
- Local: Don't distribute file but keep on local controller only.[nb 14]
- Mirror file on update: Distribute file to server only when file is updated.
- Mirror file on close: Distribute file to server only when file is closed.
- Compound file on update: Distribute file to all controllers when file is updated.
- Compound file on close: Distribute file to all controllers when file is closed.[63]
Some incompatible extensions found in some operating systems include:
Byte offset | Length (bytes) | System | Description |
---|---|---|---|
0x0C | 2 | RISC OS | File type, 0x0000–0x0FFF |
0x0C | 4 | Petrov DOSFS | File load address |
0x0E | 2 | ANDOS | File address in the memory |
0x10 | 4 | Petrov DOSFS | File execution address |
Size limits
[edit]The FAT12, FAT16, FAT16B, and FAT32 variants of the FAT file systems have clear limits based on the number of clusters and the number of sectors per cluster (1, 2, 4, ..., 128). For the typical value of 512 bytes per sector:
FAT12 requirements : 3 sectors on each copy of FAT for every 1,024 clusters
FAT16 requirements : 1 sector on each copy of FAT for every 256 clusters
FAT32 requirements : 1 sector on each copy of FAT for every 128 clusters
FAT12 range : 1 to 4,084 clusters : 1 to 12 sectors per copy of FAT
FAT16 range : 4,085 to 65,524 clusters : 16 to 256 sectors per copy of FAT
FAT32 range : 65,525 to 268,435,444 clusters : 512 to 2,097,152 sectors per copy of FAT
FAT12 minimum : 1 sector per cluster × 1 clusters = 512 bytes (0.5 KiB)
FAT16 minimum : 1 sector per cluster × 4,085 clusters = 2,091,520 bytes (2,042.5 KB)
FAT32 minimum : 1 sector per cluster × 65,525 clusters = 33,548,800 bytes (32,762.5 KB)
FAT12 maximum : 64 sectors per cluster × 4,084 clusters = 133,824,512 bytes (≈ 127 MB)
[FAT12 maximum : 128 sectors per cluster × 4,084 clusters = 267,694,024 bytes (≈ 255 MB)]
FAT16 maximum : 64 sectors per cluster × 65,524 clusters = 2,147,090,432 bytes (≈2,047 MB)
[FAT16 maximum : 128 sectors per cluster × 65,524 clusters = 4,294,180,864 bytes (≈4,095 MB)]
FAT32 maximum : 8 sectors per cluster × 268,435,444 clusters = 1,099,511,578,624 bytes (≈1,024 GB)
FAT32 maximum : 16 sectors per cluster × 268,173,557 clusters = 2,196,877,778,944 bytes (≈2,046 GB)
[FAT32 maximum : 32 sectors per cluster × 134,152,181 clusters = 2,197,949,333,504 bytes (≈2,047 GB)]
[FAT32 maximum : 64 sectors per cluster × 67,092,469 clusters = 2,198,486,024,192 bytes (≈2,047 GB)]
[FAT32 maximum : 128 sectors per cluster × 33,550,325 clusters = 2,198,754,099,200 bytes (≈2,047 GB)]
- Legend: 268435444+3 is 0x0FFFFFF7, because FAT32 version 0 uses only 28 bits in the 32-bit cluster numbers, cluster numbers 0x0FFFFFF7 up to 0x0FFFFFFF flag bad clusters or the end of a file, cluster number 0 flags a free cluster, and cluster number 1 is not used.[33] Likewise 65524+3 is 0xFFF7 for FAT16, and 4084+3 is 0xFF7 for FAT12. The number of sectors per cluster is a power of 2 fitting in a single byte, the smallest value is 1 (0x01), the biggest value is 128 (0x80). Lines in square brackets indicate the unusual cluster size 128, and for FAT32 the bigger than necessary cluster sizes 32 or 64.[64]
Because each FAT32 entry occupies 32 bits (4 bytes) the maximal number of clusters (268435444) requires 2097152 FAT sectors for a sector size of 512 bytes. 2097152 is 0x200000, and storing this value needs more than two bytes. Therefore, FAT32 introduced a new 32-bit value in the FAT32 boot sector immediately following the 32-bit value for the total number of sectors introduced in the FAT16B variant.
The boot record extensions introduced with DOS 4.0 start with a magic 40 (0x28) or 41 (0x29). Typically FAT drivers look only at the number of clusters to distinguish FAT12, FAT16, and FAT32: the human readable strings identifying the FAT variant in the boot record are ignored, because they exist only for media formatted with DOS 4.0 or later.
Determining the number of directory entries per cluster is straightforward. Each entry occupies 32 bytes; this results in 16 entries per sector for a sector size of 512 bytes. The DOS 5 RMDIR
/RD
command removes the initial ".
" (this directory) and "..
" (parent directory) entries in subdirectories directly, therefore sector size 32 on a RAM disk is possible for FAT12, but requires 2 or more sectors per cluster. A FAT12 boot sector without the DOS 4 extensions needs 29 bytes before the first unnecessary FAT16B 32-bit number of hidden sectors, this leaves three bytes for the (on a RAM disk unused) boot code and the magic 0x55 0xAA at the end of all boot sectors. On Windows NT the smallest supported sector size is 128.
On Windows NT operating systems the FORMAT
command options /A:128K
and /A:256K
correspond to the maximal cluster size 0x80
(128) with a sector size 1024 and 2048, respectively. For the common sector size 512 /A:64K
yields 128 sectors per cluster.
Both editions of each ECMA-107[24] and ISO/IEC 9293[25][26] specify a Max Cluster Number MAX
determined by the formula MAX=1+trunc((TS-SSA)/SC)
, and reserve cluster numbers MAX+1
up to 4086 (0xFF6, FAT12) and later 65526 (0xFFF6, FAT16) for future standardization.
Microsoft's EFI FAT32 specification[4] states that any FAT file system with less than 4085 clusters is FAT12, else any FAT file system with less than 65,525 clusters is FAT16, and otherwise it is FAT32. The entry for cluster 0 at the beginning of the FAT must be identical to the media descriptor byte found in the BPB, whereas the entry for cluster 1 reflects the end-of-chain value used by the formatter for cluster chains (0xFFF, 0xFFFF or 0x0FFFFFFF). The entries for cluster numbers 0 and 1 end at a byte boundary even for FAT12, e.g., 0xF9FFFF for media descriptor 0xF9.
The first data cluster is 2,[33] and consequently the last cluster MAX
gets number MAX+1
. This results in data cluster numbers 2...4085 (0xFF5) for FAT12, 2...65525 (0xFFF5) for FAT16, and 2...268435445 (0x0FFFFFF5) for FAT32.
The only available values reserved for future standardization are therefore 0xFF6 (FAT12) and 0xFFF6 (FAT16). As noted below "less than 4085" is also used for Linux implementations,[44] or as Microsoft's FAT specification puts it:[4]
...when it says <, it does not mean <=. Note also that the numbers are correct. The first number for FAT12 is 4085; the second number for FAT16 is 65525. These numbers and the "<" signs are not wrong."
Fragmentation
[edit]
The FAT file system does not contain built-in mechanisms which prevent newly written files from becoming scattered across the partition.[65] On volumes where files are created and deleted frequently or their lengths often changed, the medium will become increasingly fragmented over time.
While the design of the FAT file system does not cause any organizational overhead in disk structures or reduce the amount of free storage space with increased amounts of fragmentation, as it occurs with external fragmentation, the time required to read and write fragmented files will increase as the operating system will have to follow the cluster chains in the FAT (with parts having to be loaded into memory first in particular on large volumes) and read the corresponding data physically scattered over the whole medium reducing chances for the low-level block device driver to perform multi-sector disk I/O or initiate larger DMA transfers, thereby effectively increasing I/O protocol overhead as well as arm movement and head settle times inside the disk drive. Also, file operations will become slower with growing fragmentation as it takes increasingly longer for the operating system to find files or free clusters.
Other file systems, e.g., HPFS or exFAT, use free space bitmaps that indicate used and available clusters, which could then be quickly looked up in order to find free contiguous areas. Another solution is the linkage of all free clusters into one or more lists (as is done in Unix file systems). Instead, the FAT has to be scanned as an array to find free clusters, which can lead to performance penalties with large disks.
In fact, seeking for files in large subdirectories or computing the free disk space on FAT volumes is one of the most resource intensive operations, as it requires reading the directory tables or even the entire FAT linearly. Since the total amount of clusters and the size of their entries in the FAT was still small on FAT12 and FAT16 volumes, this could still be tolerated on FAT12 and FAT16 volumes most of the time, considering that the introduction of more sophisticated disk structures would have also increased the complexity and memory footprint of real-mode operating systems with their minimum total memory requirements of 128 KB or less (such as with DOS) for which FAT has been designed and optimized originally.
With the introduction of FAT32, long seek and scan times became more apparent, particularly on very large volumes. A possible justification suggested by Microsoft's Raymond Chen for limiting the maximum size of FAT32 partitions created on Windows was the time required to perform a "DIR
" operation, which always displays the free disk space as the last line.[66] Displaying this line took longer and longer as the number of clusters increased. FAT32 therefore introduced a special file system information sector where the previously computed amount of free space is preserved over power cycles, so that the free space counter needs to be recalculated only when a removable FAT32 formatted medium gets ejected without first unmounting it or if the system is switched off without properly shutting down the operating system, a problem mostly visible with pre-ATX-style PCs, on plain DOS systems and some battery-powered consumer products.
With the huge cluster sizes (16 KB, 32 KB, 64 KB) forced by larger FAT partitions, internal fragmentation in form of disk space waste by file slack due to cluster overhang (as files are rarely exact multiples of cluster size) starts to be a problem as well, especially when there are a great many small files.
Various optimizations and tweaks to the implementation of FAT file system drivers, block device drivers and disk tools have been devised to overcome most of the performance bottlenecks in the file system's inherent design without having to change the layout of the on-disk structures.[67][68] They can be divided into on-line and off-line methods and work by trying to avoid fragmentation in the file system in the first place, deploying methods to better cope with existing fragmentation, and by reordering and optimizing the on-disk structures. With optimizations in place, the performance on FAT volumes can often reach that of more sophisticated file systems in practical scenarios, while at the same time retaining the advantage of being accessible even on very small or old systems.
DOS 3.0 and higher will not immediately reuse disk space of deleted files for new allocations but instead seek for previously unused space before starting to use disk space of previously deleted files as well. This not only helps to maintain the integrity of deleted files for as long as possible but also speeds up file allocations and avoids fragmentation, since never before allocated disk space is always unfragmented. DOS accomplishes this by keeping a pointer to the last allocated cluster on each mounted volume in memory and starts searching for free space from this location upwards instead of at the beginning of the FAT, as it was still done by DOS 2.x.[13] If the end of the FAT is reached, it would wrap around to continue the search at the beginning of the FAT until either free space has been found or the original position has been reached again without having found free space.[13] These pointers are initialized to point to the start of the FATs after bootup,[13] but on FAT32 volumes, DOS 7.1 and higher will attempt to retrieve the last position from the FS Information Sector. This mechanism is defeated, however, if an application often deletes and recreates temporary files as the operating system would then try to maintain the integrity of void data effectively causing more fragmentation in the end.[13] In some DOS versions, the usage of a special API function to create temporary files can be used to avoid this problem.
Additionally, directory entries of deleted files will be marked 0xE5 since DOS 3.0.[42] DOS 5.0 and higher will start to reuse these entries only when previously unused directory entries have been used up in the table and the system would otherwise have to expand the table itself.[6]
Since DOS 3.3 the operating system provides means to improve the performance of file operations with FASTOPEN
by keeping track of the position of recently opened files or directories in various forms of lists (MS-DOS/PC DOS) or hash tables (DR-DOS), which can reduce file seek and open times significantly. Before DOS 5.0 special care must be taken when using such mechanisms in conjunction with disk defragmentation software bypassing the file system or disk drivers.
Windows NT will allocate disk space to files on FAT in advance, selecting large contiguous areas, but in case of a failure, files which were being appended will appear larger than they were ever written into, with a lot of random data at the end.
Other high-level mechanisms may read in and process larger parts or the complete FAT on startup or on demand when needed and dynamically build up in-memory tree representations of the volume's file structures different from the on-disk structures.[67][68] This may, on volumes with many free clusters, occupy even less memory than an image of the FAT itself. In particular on highly fragmented or filled volumes, seeks become much faster than with linear scans over the actual FAT, even if an image of the FAT would be stored in memory. Also, operating on the logically high level of files and cluster-chains instead of on sector or track level, it becomes possible to avoid some degree of file fragmentation in the first place or to carry out local file defragmentation and reordering of directory entries based on their names or access patterns in the background.
Some of the perceived problems with fragmentation of FAT file systems also result from performance limitations of the underlying block device drivers, which becomes more visible the lesser memory is available for sector buffering and track blocking/deblocking:
While the single-tasking DOS had provisions for multi-sector reads and track blocking/deblocking, the operating system and the traditional PC hard disk architecture (only one outstanding input/output request at a time and no DMA transfers) originally did not contain mechanisms which could alleviate fragmentation by asynchronously prefetching next data while the application was processing the previous chunks. Such features became available later. Later DOS versions also provided built-in support for look-ahead sector buffering and came with dynamically loadable disk caching programs working on physical or logical sector level, often utilizing EMS or XMS memory and sometimes providing adaptive caching strategies or even run in protected mode through DPMS or Cloaking to increase performance by gaining direct access to the cached data in linear memory rather than through conventional DOS APIs.
Write-behind caching was often not enabled by default with Microsoft software (if present) given the problem of data loss in case of a power failure or crash, made easier by the lack of hardware protection between applications and the system.
VFAT long file names
[edit]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/52/VFAT_directory_entries.png/330px-VFAT_directory_entries.png)
VFAT Long File Names (LFNs) are stored on a FAT file system using a trick: adding additional entries into the directory before the normal file entry. The additional entries are marked with the Volume Label, System, Hidden, and Read Only attributes (yielding 0x0F), which is a combination that is not expected in the MS-DOS environment, and therefore ignored by MS-DOS programs and third-party utilities. Notably, a directory containing only volume labels is considered as empty and is allowed to be deleted; such a situation appears if files created with long names are deleted from plain DOS. This method is very similar to the DELWATCH method to utilize the volume attribute to hide pending delete files for possible future undeletion since DR DOS 6.0 (1991) and higher. It is also similar to a method publicly discussed to store long filenames on Ataris and under Linux in 1992.[69][70]
Because older versions of DOS could mistake LFN names in the root directory for the volume label, VFAT was designed to create a blank volume label in the root directory before adding any LFN name entries (if a volume label did not already exist).[nb 13]
Each phony entry can contain up to 13 UCS-2 characters (26 bytes) by using fields in the record which contain file size or time stamps (but not the starting cluster field, for compatibility with disk utilities, the starting cluster field is set to a value of 0. See 8.3 filename for additional explanations). Up to 20 of these 13-character entries may be chained, supporting a maximum length of 255 UCS-2 characters.[55]
If the position of the LFN's last character is not at a directory entry boundary (13, 26, 39, ...), then a 0x0000 terminator is added in the next character position. Then, if that terminator is also not at the boundary, remaining character positions are filled with 0xFFFF. No directory entry containing a lone terminator will exist.
LFN entries use the following format:
Byte offset | Length (bytes) | Description |
---|---|---|
0x00 | 1 | Sequence Number (bit 6: last logical, first physical LFN entry, bit 5: 0; bits 4-0: number 0x01..0x14 (0x1F), deleted entry: 0xE5) |
0x01 | 10 | Name characters (five UCS-2 characters) |
0x0B | 1 | Attributes (always 0x0F) |
0x0C | 1 | Type (always 0x00 for VFAT LFN, other values reserved for future use; for special usage of bits 4 and 3 in SFNs see further up) |
0x0D | 1 | Checksum of DOS file name |
0x0E | 12 | Name characters (six UCS-2 characters) |
0x1A | 2 | First cluster (always 0x0000) |
0x1C | 4 | Name characters (two UCS-2 characters) |
If there are multiple LFN entries required to represent a file name, the entry representing the end of the filename comes first. The sequence number of this entry has bit 6 (0x40) set to represent that it is the last logical LFN entry, and it has the highest sequence number. The sequence number decreases in the following entries. The entry representing the start of the filename has sequence number 1. A value of 0xE5 is used to indicate that the entry is deleted.
On FAT12 and FAT16 volumes, testing for the values at 0x1A to be zero and at 0x1C to be non-zero can be used to distinguish between VFAT LFNs and pending delete files under DELWATCH.
For example, a filename like "File with very long filename.ext" would be formatted like this:
Sequence number | Entry data |
---|---|
0x03 | "me.ext" |
0x02 | "y long filena" |
0x01 | "File with ver" |
??? | Normal 8.3 entry |
A checksum also allows verification of whether a long file name matches the 8.3 name; such a mismatch could occur if a file was deleted and re-created using DOS in the same directory position. The checksum is calculated using the algorithm below. (pFCBName is a pointer to the name as it appears in a regular directory entry, i.e. the first eight characters are the filename, and the last three are the extension. The dot is implicit. Any unused space in the filename is padded with space characters (ASCII 0x20). For example, "Readme.txt" would be "README␠␠TXT
".)
unsigned char lfn_checksum(const unsigned char *pFCBName)
{
int i;
unsigned char sum = 0;
for (i = 11; i; i--)
sum = ((sum & 1) << 7) + (sum >> 1) + *pFCBName++;
return sum;
}
If a filename contains only lowercase letters, or is a combination of a lowercase basename with an uppercase extension, or vice versa; and has no special characters, and fits within the 8.3 limits, a VFAT entry is not created on Windows NT and later versions of Windows such as XP. Instead, two bits in byte 0x0C of the directory entry are used to indicate that the filename should be considered as entirely or partially lowercase. Specifically, bit 4 means lowercase extension and bit 3 lowercase basename, which allows for combinations such as "example.TXT
" or "HELLO.txt
" but not "Mixed.txt
". Few other operating systems support it. This creates a backwards-compatibility problem with older Windows versions (Windows 95 / 98 / 98 SE / ME) that see all-uppercase filenames if this extension has been used, and therefore can change the name of a file when it is transported between operating systems, such as on a USB flash drive. Current 2.6.x versions of Linux will recognize this extension when reading (source: kernel 2.6.18 /fs/fat/dir.c
and fs/vfat/namei.c
); the mount option shortname
determines whether this feature is used when writing.[71]
See also
[edit]- Comparison of file systems
- Drive letter assignment
- exFAT
- Extended Boot Record (EBR)
- FAT filesystem and Linux
- List of file systems
- Master Boot Record (MBR)
- Partition type
- Timeline of DOS operating systems
- Transaction-Safe FAT File System
- Turbo FAT
- Volume Boot Record (VBR)
Notes
[edit]- ^ a b c For maximum compatibility with MS-DOS/PC DOS and DR-DOS, operating systems trying to determine a floppy disk's format should test on all mentioned opcode sequences at sector offset 0x000 in addition to looking for a valid media descriptor byte at sector offset 0x015 before assuming the presence of a BPB. Although PC DOS 1.0 floppy disks do not contain a BPB, they start with 0xEB as well, but do not show a 0x90 at offset 0x002. PC DOS 1.10 floppy disks even start with 0xEB 0x?? 0x90, although they still do not feature a BPB. In both cases, a test for a valid media descriptor at offset 0x015 would fail (value 0x00 instead of valid media descriptors 0xF0 and higher). If these tests fail, DOS checks for the presence of a media descriptor byte in the first byte of the first FAT in the sector following the boot sector (logical sector 1 on FAT12/FAT16 floppies).
- ^ a b c d e The signature at offset 0x1FE in boot sectors is 0x55 0xAA, that is 0x55 at offset 0x1FE and 0xAA at offset 0x1FF. Since little-endian representation must be assumed in the context of IBM PC compatible machines, this can be written as 16-bit word 0xAA55 in programs for x86 processors (note the swapped order), whereas it would have to be written as 0x55AA in programs for other CPU architectures using a big-endian representation. Since this has been mixed up numerous times in books and even in original Microsoft reference documents, this article uses the offset-based byte-wise on-disk representation to avoid any possible misinterpretation.
- ^ a b c The checksum entry in Atari boot sectors holds the alignment value, not the magic value itself. The magic value 0x1234 is not stored anywhere on disk. In contrast to Intel x86 processors, the Motorola 680x0 processors as used in Atari machines use a big-endian memory representation and therefore a big-endian representation must be assumed when calculating the checksum. As a consequence of this, for checksum verification code running on x86 machines, pairs of bytes must be swapped before the 16-bit addition.
- ^ DR-DOS is able to boot off FAT12/FAT16 logical sectored media with logical sector sizes up to 1024 bytes.
- ^ a b The following DOS functions return these register values: INT 21h/AH=2Ah "Get system date" returned values: CX = year (1980..2099), DH = month (1..12), DL = day (1..31). INT 21h/AH=2Ch "Get system time" returned values: CH = hour (0..23), CL = minute (0..59), DH = second (0..59), DL = 1/100 seconds (0..99).
- ^ Windows XP has been observed to create such hybrid disks when reformatting FAT16B formatted ZIP-100 disks to FAT32 format. The resulting volumes were FAT32 by format, but still used the FAT16B EBPB. (It is unclear how Windows determines the location of the root directory on FAT32 volumes, if only a FAT16 EBPB was used.)
- ^ a b One utility providing an option to specify the desired format filler value for hard disks is DR-DOS' FDISK R2.31 with its optional wipe parameter
/W:246
. In contrast to other FDISK utilities, DR-DOS FDISK is not only a partitioning tool, but can also format freshly created partitions as FAT12, FAT16 or FAT32. This reduces the risk to accidentally format wrong volumes. - ^ In order to support the coexistence of DR-DOS with PC DOS and multiple parallel installations of DR-DOS, the extension of the default "
IBMBIO␠␠COM
" boot file name can be changed using theSYS /DR:ext
option, where ext represents the new extension. Other potential DR-DOS boot file names to be expected in special scenarios are "DRBIOS␠␠SYS
", "DRDOS␠␠␠SYS
", "IO␠␠␠␠␠␠SYS
", "JO␠␠␠␠␠␠SYS
". - ^ If a volume's dirty shutdown flag is still cleared on startup, the volume was not properly unmounted. This would, for example, cause Windows 98 WIN.COM to start SCANDISK in order to check for and repair potential logical file system errors. If the bad sector flag is cleared, it will force a surface scan to be carried out as well. This can be disabled by setting AUTOSCAN=0 in the [OPTIONS] section in MSDOS.SYS file.
- ^ a b c d See other links for special precautions in regard to occurrences of a cluster value of 0xFF0 on FAT12 volumes under MS-DOS/PC DOS 3.3 and higher.
- ^ a b Some versions of FORMAT since MS-DOS 1.25 and PC DOS 2.0 supported an option
/O
(for old) to fill the first byte of all directory entries with 0xE5 instead of utilizing the end marker 0x00. Thereby. the volume remained accessible under PC DOS 1.0-1.1, while formatting took somewhat longer and newer versions of DOS could not take advantage of the considerable speed-up caused by using the end marker 0x00. - ^ This is the reason, why 0xE5 had a special meaning in directory entries.
- ^ a b To avoid potential misinterpretation of directory volume labels with VFAT LFN entries by non-VFAT aware operating systems, the DR-DOS 7.07 FDISK and FORMAT tools are known to explicitly write dummy "
NO␠NAME␠␠␠␠
" directory volume labels if the user skips entering a volume label. The operating system would internally default to return the same string if no directory volume label could be found in the root of a volume, but without a real volume label stored as the first entry (after the directory entries), older operating systems could erroneously pick up VFAT LFN entries instead. - ^ This IBM 4680 OS and 4690 OS distribution attribute type must have an on-disk bit value of 0 as files fall back to this type when attributes get lost accidentally.
References
[edit]- ^ "File Systems". Microsoft TechNet. 2001. Archived from the original on 2011-08-12. Retrieved 2011-07-31.
- ^ a b Microsoft (2006-11-15). Windows 95 CD-ROM CONFIG.TXT File Archived 2013-01-28 at archive.today Article 135481, Revision: 1.1, retrieved 2011-12-22: "For each hard disk, specifies whether to record the date that files are last accessed. Last access dates are turned off for all drives when your computer is started in safe mode, and are not maintained for floppy disks by default. Syntax:
ACCDATE=drive1+|- [drive2+|-]...
" - ^ Bhat, W. A. (2010). "Review of FAT data structure of FAT32 file system". S2CID 58178285.
{{cite web}}
: Missing or empty|url=
(help) - ^ a b c d e f g h i j k l m n o "Microsoft Extensible Firmware Initiative FAT32 File System Specification, FAT: General Overview of On-Disk Format". Microsoft. 2000-12-06. Archived from the original on 2021-07-23. Retrieved 2011-07-03.
- ^ a b c d Haaf, Wilfried; Middel, Frank (November 1987). "Daten auf Scheiben – File- und Diskettenstrukturen unter CP/M, MSDOS und TOS: Dateiverwaltung unter TOS". c't - magazin für computertechnik. c't Kartei (in German). Vol. 1987, no. 11. Verlag Heinz Heise GmbH & Co. KG. pp. 241–246 [246]. ISSN 0724-8679.
- ^ a b c d e f g h i j k l m n o p Chappell, Geoff (January 1994). Schulman, Andrew; Pedersen, Amorette (eds.). DOS Internals. The Andrew Schulman Programming Series (1st printing, 1st ed.). Addison Wesley Publishing Company. ISBN 978-0-201-60835-9. (xxvi+738+iv pages, 3.5"-floppy [1][2]) Errata: [3][4][5]
- ^ a b c d e f g h i j k l m n o p q r s t u v w Microsoft MS-DOS 3.1 Programmierhandbuch in englischer Sprache [Microsoft MS-DOS 3.1 Programmer's Reference Manual in English]. München: Markt & Technik Verlag (published 1986). 1984. ISBN 3-89090-368-1. 8411-310-02, 036-014-012.
In regard to the jump instruction at the start of a boot sector: "Determine if the first byte of the boot sector is an E9H or EBIT (the first byte of a 3-byte NEAR or 2-byte short jump) or an EBH (the first byte of a 2-byte jump followed by a NOP). If so, a BPB is located beginning at offset 3."
(NB. This book contains many errors.) - ^ a b Daniel B. Sedory. The Boot Sector of IBM Personal Computer DOS Version 1.00 (1981). 2005-08-02 ([6] Archived 2014-05-21 at the Wayback Machine).
- ^ a b Daniel B. Sedory. The Boot Sector of IBM Personal Computer DOS Version 1.10 (1982). 2005-07-29 ([7] Archived 2014-05-21 at the Wayback Machine).
- ^ a b Caldera (1997). Caldera OpenDOS Machine Readable Source Kit 7.01. The DISK.ASM file in the machine readable source kit shows that DR-DOS tests on value 0x69 as well.
- ^ Paul, Matthias R. (2002-02-20). "Need DOS 6.22 (Not OEM)". Newsgroup: alt.msdos.programmer. Archived from the original on 2017-09-09. Retrieved 2006-10-14.
- ^ Bass, Wally (1994-02-14). "Cluster Size". Newsgroup: comp.os.msdos.programmer. Archived from the original on 2017-09-09. Retrieved 2006-10-14.
- ^ a b c d e f g h Dave Williams (1992). Programmer's Technical Reference for MSDOS and the IBM PC. DOSREF, Shareware version 01/12/1992. ISBN 1-878830-02-3. ([8] Archived 2014-05-20 at the Wayback Machine, accessed on 2012-01-08). Comment: The author mentions that DOS 4.0 checks the OEM label, but denies that DOS 3.2 checks it as well (although it does).
- ^ Paul, Matthias R. (2004-08-25). "NOVOLTRK.REG". www.drdos.org. Archived from the original on 2016-03-04. Retrieved 2011-12-17. [9]
- ^ a b "Troubleshooting Disks and File Systems". Microsoft TechNet. 2005-11-05. Archived from the original on 2014-06-07. Retrieved 2014-06-15.
- ^ IBM (1983). IBM PC Technical Reference Handbook. Comment: Includes a complete listing of the ROM BIOS source code of the original IBM PC.
- ^ a b c d Hans-Dieter Jankowski, Dietmar Rabich, Julian F. Reschke (1992). Atari Profibuch ST-STE-TT. Sybex, 4th edition, 12th batch. ISBN 3-88745-888-5, ISBN 978-3-88745-888-1.
- ^ Seagate Technologies, "The Transition to Advanced Format 4K Sector Hard Drives (archived by Wayback Machine @Archive.org)", 2010 ([10]).
- ^ a b c d Brown, Ralf D. (2002-12-29). "The x86 Interrupt List". Archived from the original on 2016-06-16. Retrieved 2011-10-14.
- ^ a b c d de Boyne Pollard, Jonathan (2010) [2006]. "All about BIOS parameter blocks". Frequently Given Answers. Archived from the original on 2016-08-26. Retrieved 2014-06-02.
- ^ a b c Microsoft MS-DOS Programmer's Reference: version 5.0. Microsoft press. 1991. ISBN 1-55615-329-5.
- ^ a b c d e f g h i j k "Standard Floppy Disk Formats Supported by MS-DOS". Microsoft Help and Support. 2003-05-12. Archived from the original on 2015-01-09. Retrieved 2012-09-11.
- ^ a b c Microsoft (1987-07). MS-DOS 3.3 Programmer's Reference.
- ^ a b c d e f g h i j "Volume and File Structure of Disk Cartridges for Information Interchange". Standard ECMA-107 (2nd ed., June 1995). ECMA. 1995. Archived from the original on 2018-10-07. Retrieved 2011-07-30.
- ^ a b c d e f g h i j "Information technology -- Volume and file structure of disk cartridges for information interchange". ISO/IEC 9293:1994. ISO catalogue. 1994. Archived from the original on 2012-01-17. Retrieved 2012-01-06.
- ^ a b c d e f g h i j "Information processing -- Volume and file structure of flexible disk cartridges for information interchange". ISO 9293:1987. ISO catalogue. 1987. Archived from the original on 2012-01-17. Retrieved 2012-01-06.
- ^ a b c Andries Brouwer (2002-09-20). "The FAT file system". Archived from the original on 2011-10-06. Retrieved 2011-10-16.
- ^ a b c d e f g h i j k l m n o p q r Paterson, Tim; Microsoft (2013-12-19) [1983]. "Microsoft DOS V1.1 and V2.0: /msdos/v20source/SKELIO.TXT, /msdos/v20source/HRDDRV.ASM". CHM. Computer History Museum, Microsoft. Archived from the original on 2019-08-14. Retrieved 2014-03-25. (NB. While the publishers claim this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
- ^ a b c d e f g h i j Zbikowski, Mark; Allen, Paul; Ballmer, Steve; Borman, Reuben; Borman, Rob; Butler, John; Carroll, Chuck; Chamberlain, Mark; Chell, David; Colee, Mike; Courtney, Mike; Dryfoos, Mike; Duncan, Rachel; Eckhardt, Kurt; Evans, Eric; Farmer, Rick; Gates, Bill; Geary, Michael; Griffin, Bob; Hogarth, Doug; Johnson, James W.; Kermaani, Kaamel; King, Adrian; Koch, Reed; Landowski, James; Larson, Chris; Lennon, Thomas; Lipkie, Dan; McDonald, Marc; McKinney, Bruce; Martin, Pascal; Mathers, Estelle; Matthews, Bob; Melin, David; Mergentime, Charles; Nevin, Randy; Newell, Dan; Newell, Tani; Norris, David; O'Leary, Mike; O'Rear, Bob; Olsson, Mike; Osterman, Larry; Ostling, Ridge; Pai, Sunil; Paterson, Tim; Perez, Gary; Peters, Chris; Petzold, Charles; Pollock, John; Reynolds, Aaron; Rubin, Darryl; Ryan, Ralph; Schulmeisters, Karl; Shah, Rajen; Shaw, Barry; Short, Anthony; Slivka, Ben; Smirl, Jon; Stillmaker, Betty; Stoddard, John; Tillman, Dennis; Whitten, Greg; Yount, Natalie; Zeck, Steve (1988). "Technical advisors". The MS-DOS Encyclopedia: versions 1.0 through 3.2. By Duncan, Ray; Bostwick, Steve; Burgoyne, Keith; Byers, Robert A.; Hogan, Thom; Kyle, Jim; Letwin, Gordon; Petzold, Charles; Rabinowitz, Chip; Tomlin, Jim; Wilton, Richard; Wolverton, Van; Wong, William; Woodcock, JoAnne (Completely reworked ed.). Redmond, Washington, USA: Microsoft Press. ISBN 1-55615-049-0. LCCN 87-21452. OCLC 16581341. (xix+1570 pages; 26 cm) (NB. This edition was published in 1988 after extensive rework of the withdrawn 1986 first edition by a different team of authors. [11] Archived 2018-10-14 at the Wayback Machine)
- ^ a b "Detailed Explanation of FAT Boot Sector". Microsoft Knowledge Base. 2003-12-06. Archived from the original on 2011-11-28. Retrieved 2011-10-16.
- ^ a b c Lai, Robert S.; The Waite Group (1987). Writing MS-DOS Device Drivers (2nd ed.). Addison Wesley. ISBN 0-201-60837-5.
- ^ a b c d e f g h i j k l m n o p q r s t Paterson, Tim; Microsoft (2013-12-19) [1983]. "Microsoft DOS V1.1 and V2.0: /msdos/v20source/DEVDRIV.txt". Computer History Museum, Microsoft. Archived from the original on 2019-08-14. Retrieved 2014-03-25. (NB. While the publishers claim this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
- ^ a b c d e Tim Paterson (1983). "An Inside Look at MS-DOS". Byte. Archived from the original on 2011-07-20. Retrieved 2011-07-18.
The numbering starts with 2; the first two numbers, 0 and 1, are reserved.
- ^ a b c d PORT-DOS - Userprompt Guide for Apricot Portable. User-Prompt Guides, UK ([12] Archived 2013-05-22 at the Wayback Machine).
- ^ a b c d e John C. Elliott (1998). DOSPLUS disc formats. ([13] Archived 2013-06-07 at the Wayback Machine).
- ^ a b c d The BBC Master 512. Yellow Pig's BBC Computer Pages ([14] Archived 2014-05-21 at the Wayback Machine).
- ^ Digital Equipment Corporation. Rainbow 100 MS-DOS 2.01 Technical Documentation Volume 1 (QV025-GZ), Microsoft MS-DOS Operating System BIOS Listing (AA-X432A-TV), Universal Disk Driver, Page 1-17. 1983.
- ^ "Detailed Explanation of FAT Boot Sector". DEW Associates Corporation. 2002. Archived from the original on 2011-09-26. Retrieved 2011-10-16.
- ^ Tyagi, Tarun (2004-10-31). "Clusters size in FAT and NTFS file systems". Data Recovery With and Without Programming. New Delhi, India: Gardners Books. p. 4. ISBN 978-81-7656-922-4. Archived from the original on 2021-12-03. Retrieved 2021-12-03.
- ^ Daniel B. Sedory. Detailed Notes on the "Dirty Shutdown Flag" under MS-Windows. 2001-12-04. ([15] Archived 2014-05-21 at the Wayback Machine).
- ^ a b c d e "Windows 98 Resource Kit - Chapter 10 - Disks and File Systems". Microsoft TechNet. 1998. Archived from the original on 2012-05-01. Retrieved 2012-07-16.
- ^ a b c d Schulman, Andrew; Brown, Ralf D.; Maxey, David; Michels, Raymond J.; Kyle, Jim (1994) [November 1993]. Undocumented DOS: A programmer's guide to reserved MS-DOS functions and data structures - expanded to include MS-DOS 6, Novell DOS and Windows 3.1 (2 ed.). Reading, Massachusetts: Addison Wesley. p. 11. ISBN 0-201-63287-X. (xviii+856+vi pages, 3.5"-floppy) Errata: [16][17]
- ^ Peter Norton (1986). Inside the IBM PC, Revised and Enlarged, Brady. ISBN 0-89303-583-1, p. 157.
- ^ a b c Andries Brouwer. "FAT under Linux". Archived from the original on 2014-07-01. Retrieved 2014-05-20.
- ^ Andries Brouwer (2002-09-20). "FAT". Archived from the original on 2017-12-17. Retrieved 2012-01-11.
- ^ a b c Seattle Computer Products (1981). "SCP 86-DOS 1.0 Addendum" (PDF). Archived (PDF) from the original on 2012-10-03. Retrieved 2013-03-10.
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak Paul, Matthias R. (1997-07-30) [1994-05-01]. NWDOS-TIPs — Tips & Tricks rund um Novell DOS 7, mit Blick auf undokumentierte Details, Bugs und Workarounds. MPDOSTIP (in German) (3 ed.). Archived from the original on 2016-11-05. Retrieved 2012-01-11. (NB. NWDOSTIP.TXT is a comprehensive work on Novell DOS 7 and OpenDOS 7.01, including the description of many undocumented features and internals. It is part of the author's yet larger MPDOSTIP.ZIP collection maintained up to 2001 and distributed on many sites at the time. The provided link points to a HTML-converted older version of the file.) [18]
- ^ IBM. 4690 OS User's Guide Version 5.2, IBM document SC30-4134-01, 2008-01-10 ([19] Archived 2022-01-25 at the Wayback Machine).
- ^ a b Paterson, Tim; Microsoft (2013-12-19) [1983]. "Microsoft DOS V1.1 and V2.0: /msdos/v20source/FORMAT.TXT". Computer History Museum, Microsoft. Archived from the original on 2019-08-14. Retrieved 2014-03-25. (NB. While the publishers claim this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
- ^ a b Shustek, Len (2014-03-24). "Microsoft MS-DOS early source code". Software Gems: The Computer History Museum Historical Source Code Series. Archived from the original on 2019-08-10. Retrieved 2014-03-29. (NB. While the author claims this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
- ^ a b Levin, Roy (2014-03-25). "Microsoft makes source code for MS-DOS and Word for Windows available to public". Official Microsoft Blog. Archived from the original on 2014-03-28. Retrieved 2014-03-29. (NB. While the author claims this would be MS-DOS 1.1 and 2.0, it actually is SCP MS-DOS 1.25 and a mixture of Altos MS-DOS 2.11 and TeleVideo PC DOS 2.11.)
- ^ JEIDA/JEITA/CIPA (2010). "Standard of the Camera & Imaging Products Association, CIPA DC-009-Translation-2010, Design rule for Camera File system: DCF Version 2.0 (Edition 2010)" (PDF). Archived from the original (PDF) on 2013-09-30. Retrieved 2011-04-13.
- ^ a b c d e f g h i j k l m n o p q Caldera (1997). Caldera OpenDOS Machine Readable Source Kit 7.01. The FDOS.EQU file in the machine readable source kit has equates for the corresponding directory entries.
- ^ John C. Elliott (1998). CP/M 4.1 disc formats. ([20] Archived 2014-08-26 at the Wayback Machine): "CP/M 4.1 (DOS Plus [1.2]) allows the use of two file systems - CP/M and DOS. The version [...] supplied with the Amstrad PC1512 cannot handle larger floppies than 360k (CP/M) / 1.2Mb (DOS), or larger hard drive partitions than 32Mb. [...] The DOS file system can be either FAT12 or FAT16. The format is exactly as in PCDOS 2.11, except: Byte 0Ch of the directory entry [...] holds the four "user attributes" F1'-F4' [...] DRDOS-style passwords are not supported."
- ^ a b vinDaci (1998-01-06). "Long Filename Specification". Archived from the original on 2001-04-20. Retrieved 2007-03-13.
- ^ Henk Kelder. FAT32.TXT for FAT32.IFS version 0.74. ("@Macarlo, Inc". Archived from the original on 2012-03-30. Retrieved 2012-01-14.). Comment: This older version of the README file still discusses the old 0xEA and 0xEC magic values.
- ^ Henk Kelder (2003). FAT32.TXT for FAT32.IFS version 0.9.13." ([21] Archived 2022-01-25 at the Wayback Machine): "This byte [...] is not modified while running Windows 95 and neighter by SCANDISK or DEFRAG. [...] If another program sets the value to 0x00 for a file that has EAs these EAs will no longer be found using DosFindFirst/Next calls only. The other OS/2 calls for retrieving EAs (DosQueryPathInfo, DosQueryFileInfo and DosEnumAttribute) do not rely on this byte. Also the opposite could [...] occur. [...] In this situation only the performance of directory scans will be decreased. Both situations [...] are corrected by CHKDSK".
- ^ Netlabs. FAT32.IFS Wiki and Sources. ([22] Archived 2013-05-11 at the Wayback Machine).
- ^ a b IBM. 4690 OS Programming Guide Version 5.2, IBM document SC30-4137-01, 2007-12-06 ([23] Archived 2022-01-25 at the Wayback Machine).
- ^ a b c d e f g h i j k l m n OpenDOS Developer's Reference Series — System and Programmer's Guide — Programmer's Guide. Caldera, Inc. August 1997. Caldera Part No. 200-DODG-003. Archived from the original on 2017-10-07. Retrieved 2014-05-20. (Printed in the UK.)
- ^ Bob Eager, Tavi Systems (2000-10-28). Implementation of extended attributes on the FAT file system. ([24] Archived 2006-06-13 at the Wayback Machine).
- ^ IBM (2003). Information about 4690 OS unique file distribution attributes, IBM document R1001487, 2003-07-30. ("IBM Information about 4690 OS unique file distribution attributes - United States". Archived from the original on 2014-05-21. Retrieved 2014-05-20.): "[...] file types are stored in the "Reserved bits" portion of the PC-DOS file directory structure [...] only 4690 respects and preserves these attributes. Various non-4690 operating systems take different actions if these bits are turned on [...] when copying from a diskette created on a 4690 system. [...] PC-DOS and Windows 2000 Professional will copy the file without error and zero the bits. OS/2 [...] 1.2 [...] will refuse to copy the file unless [...] first run CHKDSK /F on the file. After [...] CHKDSK, it will copy the file and zero the bits. [...] when [...] copy [...] back to the 4690 system, [...] file will copy as a local file."
- ^ IBM. 4690 save and restore file distribution attributes. IBM document R1000622, 2010-08-31 ("IBM 4690 save and restore file distribution attributes - United States". Archived from the original on 2014-05-21. Retrieved 2014-05-20.).
- ^ "Limitations of FAT32 File System". Microsoft Knowledge Base. 2007-03-26. Archived from the original on 2011-08-15. Retrieved 2011-08-21.
Clusters cannot be 64 kilobytes or larger
- ^ Duncan, Ray (1989). "Design goals and implementation of the new High Performance File System". Microsoft Systems Journal. Archived from the original on 2011-07-16. Retrieved 2014-05-20. [NB. This particular text file has a number of OCR errors; e.g., "Ray" is the author's correct name; not 'Roy' as the text shows.]
- ^ Chen, Raymond (July 2006). "Microsoft TechNet: A Brief and Incomplete History of FAT32". Microsoft TechNet Magazine. Archived from the original on 2008-11-18. Retrieved 2014-05-20.
- ^ a b Les Bell; Associates Pty Ltd (1996-09-02) [1990]. "OS/2 High Performance File System". PC Support Advisor. Archived from the original on 2014-03-01. Retrieved 2014-06-24.
- ^ a b Bridges, Dan (February 1996). "Inside the High Performance File System - Part 2/6: Introduction". Significant Bits, Brisbug PC User Group Inc. Archived from the original on 2015-09-23. Retrieved 2014-06-24.
- ^ Natuerlich! (1992-03-24). "Getting longer filenames out of GEMDOS". comp.sys.atari.st.tech. Archived from the original on 2014-04-24. Retrieved 2014-05-05.
- ^ Torvalds, Linus (1992-12-23). "Long filenames". comp.os.minix. Archived from the original on 2014-04-23. Retrieved 2014-05-05.
- ^ "mount(8): mount file system". Linux man page. Archived from the original on 2014-05-05. Retrieved 2014-05-20.
External links
[edit]- ECMA-107 Volume and File Structure of Disk Cartridges for Information Interchange, identical to ISO/IEC 9293.
- Microsoft Extensible Firmware Initiative FAT32 File System Specification, FAT: General Overview of On-Disk Format
- Understanding FAT32 file systems (explained for embedded firmware developers)
- Understanding FAT including lots of info about LFNs
- Detailed Explanation of FAT Boot Sector: Microsoft Knowledge Base Article 140418
- Description of the FAT32 File System: Microsoft Knowledge Base Article 154997
- FAT12/FAT16/FAT32 file system implementation for *nix: Includes libfat libraries and fusefat, a FUSE file system driver
- MS-DOS: Directory and Subdirectory Limitations: Microsoft Knowledge Base Article 39927
- Overview of FAT, HPFS, and NTFS File Systems: Microsoft Knowledge Base Article 100108
- Volume and file size limits of FAT file systems: Microsoft Technet, copy made by Internet Archive Wayback Machine
- Microsoft TechNet: A Brief and Incomplete History of FAT32 by Raymond Chen
- FAT32 Formatter Archived 2009-07-21 at the Wayback Machine: allows formatting volumes larger than 32 GB with FAT32 under Windows 2000, Windows XP and Windows Vista
- Fdisk does not recognize full size of hard disks larger than 64 GB: Microsoft Knowledge Base Article 263044, copy made by Internet Archive Wayback Machine. Explains inability to work with extremely large volumes under Windows 95/98.
- Microsoft Windows XP: FAT32 File System. Copy made by Internet Archive Wayback Machine of an article with summary of limits in FAT32 which is no longer available on Microsoft website.
- Visual Layout of a FAT16 drive