Dimethyl selenide
(Redirected from Dimethylselenide)
| |
| |
| Names | |
|---|---|
| Preferred IUPAC name
(Methylselanyl)methane | |
| Other names
methylselenide
| |
| Identifiers | |
3D model (JSmol)
|
|
| 1696848 | |
| ChEBI | |
| ECHA InfoCard | 100.008.918 |
| EC Number |
|
| KEGG | |
PubChem CID
|
|
| UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| C2H6Se | |
| Molar mass | 109.041 g·mol−1 |
| Appearance | colorless liquid |
| Density | 1.4077 g/cm3 (14.6 °C) |
| Melting point | −87.2 °C (−125.0 °F; 186.0 K) |
| Boiling point | 55 °C (131 °F; 328 K) |
| Hazards | |
| GHS labelling: | |
  
| |
| Warning | |
| H301, H331, H373, H410 | |
| P260, P261, P264, P270, P271, P273, P301+P310, P304+P340, P311, P314, P321, P330, P391, P403+P233, P405, P501 | |
| Related compounds | |
Related compounds
|
|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Dimethyl selenide is the organoselenium compound with the formula (CH3)2Se. This colorless, malodorous, liquid is the simplest selenoether. It occurs in trace amounts in anaerobic environments[1] and in the atmosphere due to biomethylation of selenium.[2][3]
Dimethyl selenide is prepared by treating Se2− sources with electrophilic methylating agents such as methyl iodide:
- Na2Se + 2 CH3I → (CH3)2Se + 2 NaI
The carbon–selenium bond length is 1.943 Å and the C–Se–C bond angle is 96.2°, as determined by microwave spectroscopy.[4][5] Similar dimensions of 1.98 Å and 98° are found by gas electron diffraction.[6][7]
References
[edit]- ^ Michalke, K.; Wickenheiser, E. B.; Mehring, M.; Hirner, A. V.; Hensel, R. (2000). "Production of volatile derivatives of metal(loid)s by microflora involved in anaerobic digestion of sewage sludge". Applied and Environmental Microbiology. 66 (7): 2791–2796. Bibcode:2000ApEnM..66.2791M. doi:10.1128/AEM.66.7.2791-2796.2000. PMC 92074. PMID 10877769.
- ^ Chasteen, Thomas G.; Bentley, Ronald (2003). "Biomethylation of Selenium and Tellurium: Microorganisms and Plants". Chem. Rev. 103 (1): 1–26. doi:10.1021/cr010210+. PMID 12517179.
- ^ Atkinson, Roger; Aschmann, Sara M.; Hasegawa, David; Thompson-Eagle, Elisabeth T.; Frankenberger Jr., William T. (1990). "Kinetics of the atmospherically important reactions of dimethyl selenide". Environ. Sci. Technol. 24 (9): 1326–1332. Bibcode:1990EnST...24.1326A. doi:10.1021/es00079a005.
- ^ William M. Haynes, ed. (2016). CRC Handbook of Chemistry and Physics (97th ed.). CRC Press. p. 9–41. ISBN 978-1498754293.
- ^ Beecher, James F. (1966). "Microwave spectrum, dipole moment, structure, and internal rotation of dimethyl selenide". J. Mol. Spectrosc. 21 (1–4): 414–424. Bibcode:1966JMoSp..21..414B. doi:10.1016/0022-2852(66)90165-2.
- ^ Wells, A. F. (1984). Structural Inorganic Chemistry (5th ed.). Oxford University Press. p. 705. ISBN 978-0-19-965763-6.
- ^ Goldish, Elihu; Hedberg, Kenneth; Marsh, Richard E.; Schomaker, Verner (1955). "An Electron Diffraction Investigation of Dimethyl Selenide". J. Am. Chem. Soc. 77 (11): 2948–2949. doi:10.1021/ja01616a005.