Minimum relevant variables in linear system
Minimum relevant variables in linear system (Min-RVLS) is a problem in mathematical optimization. Given a linear program, it is required to find a feasible solution in which the number of non-zero variables is as small as possible.
The problem is known to be NP-hard and even hard to approximate.
Definition
[edit]A Min-RVLS problem is defined by:[1]
- A binary relation R, which is one of {=, ≥, >, ≠};
- An m-by-n matrix A (where m is the number of constraints and n the number of variables);
- An m-by-1 vector b.
The linear system is given by: A x R b. It is assumed to be feasible (i.e., satisfied by at least one x). Depending on R, there are four different variants of this system: A x = b, A x ≥ b, A x > b, A x ≠ b.
The goal is to find an n-by-1 vector x that satisfies the system A x R b, and subject to that, contains as few as possible nonzero elements.
Special case
[edit]The problem Min-RVLS[=] was presented by Garey and Johnson,[2] who called it "minimum weight solution to linear equations". They proved it was NP-hard, but did not consider approximations.
Applications
[edit]The Min-RVLS problem is important in machine learning and linear discriminant analysis. Given a set of positive and negative examples, it is required to minimize the number of features that are required to correctly classify them.[3] The problem is known as the minimum feature set problem. An algorithm that approximates Min-RVLS within a factor of could substantially reduce the number of training samples required to attain a given accuracy level.[4]
The shortest codeword problem in coding theory is the same problem as Min-RVLS[=] when the coefficients are in GF(2).
Related problems
[edit]In minimum unsatisfied linear relations (Min-ULR), we are given a binary relation R and a linear system A x R b, which is now assumed to be infeasible. The goal is to find a vector x that violates as few relations as possible, while satisfying all the others.
Min-ULR[≠] is trivially solvable, since any system with real variables and a finite number of inequality constraints is feasible. As for the other three variants:
- Min-ULR[=,>,≥] are NP-hard even with homogeneous systems and bipolar coefficients (coefficients in {1,-1}). [5]
- The NP-complete problem Minimum feedback arc set reduces to Min-ULR[≥], with exactly one 1 and one -1 in each constraint, and all right-hand sides equal to 1.[6]
- Min-ULR[=,>,≥] are polynomial if the number of variables n is constant: they can be solved polynomially using an algorithm of Greer[7] in time .
- Min-ULR[=,>,≥] are linear if the number of constraints m is constant, since all subsystems can be checked in time O(n).
- Min-ULR[≥] is polynomial in some special case.[6]
- Min-ULR[=,>,≥] can be approximated within n + 1 in polynomial time.[1]
- Min-ULR[>,≥] are minimum-dominating-set-hard, even with homogeneous systems and ternary coefficients (in {−1,0,1}).
- Min-ULR[=] cannot be approximated within a factor of , for any , unless NP is contained in DTIME().[8]
In the complementary problem maximum feasible linear subsystem (Max-FLS), the goal is to find a maximum subset of the constraints that can be satisfied simultaneously.[5]
- Max-FLS[≠] can be solved in polynomial time.
- Max-FLS[=] is NP-hard even with homogeneous systems and bipolar coefficients.
- . With integer coefficients, it is hard to approximate within . With coefficients over GF[q], it is q-approximable.
- Max-FLS[>] and Max-FLS[≥] are NP-hard even with homogeneous systems and bipolar coefficients. They are 2-approximable, but they cannot be approximated within any smaller constant factor.
Hardness of approximation
[edit]All four variants of Min-RVLS are hard to approximate. In particular all four variants cannot be approximated within a factor of , for any , unless NP is contained in DTIME().[1]: 247–250 The hardness is proved by reductions:
- There is a reduction from Min-ULR[=] to Min-RVLS[=]. It also applies to Min-RVLS[≥] and Min-RVLS[>], since each equation can be replaced by two complementary inequalities.
- There is a reduction from minimum-dominating-set to Min-RVLS[≠].
On the other hand, there is a reduction from Min-RVLS[=] to Min-ULR[=]. It also applies to Min-ULR[≥] and Min-ULR[>], since each equation can be replaced by two complementary inequalities.
Therefore, when R is in {=,>,≥}, Min-ULR and Min-RVLS are equivalent in terms of approximation hardness.
References
[edit]- ^ a b c Amaldi, Edoardo; Kann, Viggo (December 1998). "On the approximability of minimizing nonzero variables or unsatisfied relations in linear systems". Theoretical Computer Science. 209 (1–2): 237–260. doi:10.1016/S0304-3975(97)00115-1.
- ^ Garey, Michael R.; Johnson, David S. (1979). Computers and Intractability: A Guide to the Theory of NP-completeness. W. H. Freeman. ISBN 978-0-7167-1044-8.
- ^ Koehler, Gary J. (November 1991). "Linear Discriminant Functions Determined by Genetic Search". ORSA Journal on Computing. 3 (4): 345–357. doi:10.1287/ijoc.3.4.345.
- ^ Van Horn, Kevin S.; Martinez, Tony R. (January 1994). "The minimum feature set problem". Neural Networks. 7 (3): 491–494. doi:10.1016/0893-6080(94)90082-5.
- ^ a b Amaldi, Edoardo; Kann, Viggo (August 1995). "The complexity and approximability of finding maximum feasible subsystems of linear relations". Theoretical Computer Science. 147 (1–2): 181–210. doi:10.1016/0304-3975(94)00254-G.
- ^ a b Sankaran, Jayaram K (February 1993). "A note on resolving infeasibility in linear programs by constraint relaxation". Operations Research Letters. 13 (1): 19–20. doi:10.1016/0167-6377(93)90079-V.
- ^ Greer, R. (2011). Trees and Hills: Methodology for Maximizing Functions of Systems of Linear Relations. Elsevier. ISBN 978-0-08-087207-0.[page needed]
- ^ Arora, Sanjeev; Babai, László; Stern, Jacques; Sweedyk, Z (April 1997). "The Hardness of Approximate Optima in Lattices, Codes, and Systems of Linear Equations". Journal of Computer and System Sciences. 54 (2): 317–331. doi:10.1006/jcss.1997.1472.