9. AXGBE Poll Mode Driver

The AXGBE poll mode driver library (librte_net_axgbe) implements support for AMD 10 Gbps family of adapters. It is compiled and tested in standard linux distro like Ubuntu.

Detailed information about SoCs that use these devices can be found here:

9.1. Supported Features

AXGBE PMD has support for:

  • Base L2 features

  • TSS (Transmit Side Scaling)

  • Promiscuous mode

  • Port statistics

  • Multicast mode

  • RSS (Receive Side Scaling)

  • Checksum offload

  • Jumbo Frame up to 9K

9.2. Building DPDK

See the DPDK Getting Started Guide for Linux for instructions on how to build DPDK.

By default the AXGBE PMD library will be built into the DPDK library.

For configuring and using UIO frameworks, please also refer the documentation that comes with DPDK suite.

9.3. Prerequisites and Pre-conditions

  • Prepare the system as recommended by DPDK suite.

  • Bind the intended AMD device to igb_uio or vfio-pci module.

Now system is ready to run DPDK application.

9.4. Usage Example

Refer to the document compiling and testing a PMD for a NIC for details.

Example output:

[...]
EAL: PCI device 0000:02:00.4 on NUMA socket 0
EAL:   probe driver: 1022:1458 net_axgbe
Interactive-mode selected
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=171456, size=2176, socket=0
USER1: create a new mbuf pool <mbuf_pool_socket_1>: n=171456, size=2176, socket=1
USER1: create a new mbuf pool <mbuf_pool_socket_2>: n=171456, size=2176, socket=2
USER1: create a new mbuf pool <mbuf_pool_socket_3>: n=171456, size=2176, socket=3
Configuring Port 0 (socket 0)
Port 0: 00:00:1A:1C:6A:17
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
testpmd>