Papercraft EAGLE bird mask Animal 3D Low Poly Paper Mask DIY cosplay masquerade for party pepakura pattern template paper Animal Full Mask

3D Papercraft PDF Template Pattern DIY Kit Low Poly Polygonal Paper Cardboard Figure Model Sculpture An electronic template EAGLE bird mask in PDF format. Attention! This is not a finished model! This is a digital file for printing and self-assembly. Уou are buying a template in electronic PDF format, provided automatically after payment. Difficulty: Medium Assembly time: 2-3 hours Template to print (PDF) contains 3 pages of A4: Details Eagle Mask - 8 pieces Details in White - 4 pieces Details in Orange - 4 pieces SIZE: Height - 201 mm; Width - 152 mm; Depth - 198 mm; Recommendations on choosing the type of paper for printing of the scheme The simplest and the most affordable type of paper is paper for watercolors, with density from 180 to 300 g/m2 The perfect choice will be designer cardboard with density from 240g/m2 . Using of office paper and cardboard for children is not recommended. Paragraph 1: Step One: Wash your hands thoroughly and dry them. Step Two: Prepare your working place. As a surface for cutting, we recommend to use linoleum, mat for cutting or modelling board. Step Three: With the help of the awl, the pen without ink or think needle, draw a line along all dotted and dot-dashed lines. Step Four: Cut out all pieces according to the dotted lines with the help of medical scalpel, office knife or craft knife. Using the ruler for more accurate edges is recommended. Paragraph 2: Folding of the pieces Step one: Fold the flaps according to the markings Dot-dashed line - fold outwards Dotted line - fold inwards Paragraph 3: Gluing of the pieces Step one: take pieces number one and two. Step two: apply a thin layer of glue onto the outward side of the flap without marking. Glue excesses ca removed with the help of cotton swab. Step three: glue together pieces number two and three according to the numbers on the edges. During the process of gluing all the flaps should be inside the model. Step four: Continue to glue the parts until the model is fully ready. Note. It is better to use types of cardboard with higher density, such as corrugated board and others for the back side of big-sized models to prevent sagging and deformation. Paragraph 4: Share a photo Step one: Take a few photos with the ready model. Step two: Share the photos with your family, friends and colleagues via social networking sites, using hashtag #art_paper_store, #shaper.paper We will be happy if you tag us on your photos @art_paper_store, @shaper.paper By purchasing and downloading my templates, you agree that all my developments are copyrighted and are intended for personal use only and not for distribution. Read the instructions carefully before assembly. If you want to make model larger in size, print the pattern on A3 size paper and scale up to 145%. Enjoy it! I don't accept returns, exchanges, or cancellations. But please contact me if you have any problems with your order. Tags: DIY Paper Sculpture * PDF Template * PDF Pattern * 3d Puzzle * DIY low poly * Paper sculpture * low poly decoration * DIY kit * paper model * Papercraft Trophy * Papercraft Head * 3D Paper Sculpture * Polygonal animal * Paper wall sculpture * Papercraft Pattern * PDF Papercraft * Papercraft Template * DIY paper animals * pepakura papercraft * polygonal model * paper toy * paper animal DIY * faux taxidermy