View source for File:Simple feedback control loop.svg

== {{int:filedesc}} ==
{{Information
|Description={{en|[[:en:Block diagram|Block diagram]] of a simple [[:en:negative feedback|negative feedback]] [[:en:control system|control system]].  The box ''P'' represents the ''Plant'', the system to be controlled.  Its output ''y''(''t'') is continuously compared to a ''reference signal'' ''r''(''t'')  representing the desired output.  The difference between the two, called the ''error signal'' ''e''(''t'') is used by a ''Controller'' device (''C'')  to generate a control signal ''u''(''t'') to change the behavior of the plant.}}
|Source={{Derived from|Simple_feedback_control_loop.png|display=50}}
|Date=2013-06-15 06:08 (UTC)
|Author=*[[:File:Simple_feedback_control_loop.png|Simple_feedback_control_loop.png]]: [[:en:User:Ap]]
*derivative work: [[User:Chetvorno|Chetvorno]]
|Permission=
|other_versions={{Other versions/feedback model}}
}}

{{RetouchedPicture|Replaced monospaced font with sans-serif|editor=Chetvorno|orig=Simple_feedback_control_loop.png}}

== {{int:license-header}} ==
{{self|Cc-by-sa-3.0-migrated|GFDL}}

== {{Original upload log}} ==
This image is a derivative work of the following images:

*[[:File:Simple_feedback_control_loop.png]] licensed with Cc-by-sa-3.0-migrated, GFDL
**2005-08-13T10:03:35Z [[User:Ikiwaner|Ikiwaner]] 439x116 (5674 Bytes) ''<nowiki>Simple feedback control loop block diagram  Created in Dia by [[:en:User:Ap]]  original upload to en.wikiprdia.org on 00:56, 17. Jan 2003  {{GFDL}}  [[Category:Mechanical engineering]]</nowiki>''

{{Uploaded with derivativeFX}}

[[Category:Control theory block diagrams]]
[[Category:Feedback loops]]