1.
|
Modeling Results of the Quench Behavior of a Nb-Ti Canted-Cosine-Theta Corrector Magnet for LHC
/ Bagni, T (Uppsala U.) ; Ahl, A (Scanditronix Instrument, Uppsala) ; Almström, M (Linnaeus U.) ; Canale, M (CERN) ; Dugic, I (Linnaeus U.) ; Emilsson, F (AMACC, Uppsala) ; Gentini, L (CERN) ; Haralanova, V (Linnaeus U.) ; Johansson, M (Unlisted, SE) ; Karlsson, G (Linnaeus U.) et al.
A newly designed superconducting magnet of the Canted-Cosine-Theta (CCT) type was developed as a result of a collaboration between Swedish universities (Uppsala and Linneaus) and Swedish industries. This magnet was designed to function as a replacement of the present LHC orbit corrector magnets, which are approaching their end of life due to the radiation load. [...]
2024 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 34 (2024) 4001105
|
|
2.
|
Design and Fabrication of a Canted-Cosine-Theta Double Aperture Orbit Corrector Dipole for the LHC
/ Pepitone, K (Uppsala U.) ; Kirby, G (CERN) ; Olvegård, M (Uppsala U.) ; Ahl, A (Scanditronix Instrument, Uppsala) ; Almström, M (Linnaeus U.) ; Dugic, I (Linnaeus U.) ; Emilsson, F (AMACC, Uppsala) ; Haralanova, V (Linnaeus U.) ; Johansson, M (Unlisted, SE) ; Karlsson, G (Linnaeus U.) et al.
A prototype CCT dipole magnet developed by a collaboration between Swedish universities, Swedish industry and CERN will be tested at Uppsala University. This 1 m long double-aperture magnet can provide a field strength of 3.3 T at 85 A in a 70 mm aperture with an integrated field of 2.8 Tm. [...]
2023 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 33 (2023) 4000405
In : Applied Superconductivity Conference, Honolulu, Hawaii, United States, 23 - 28 Oct 2022
|
|
3.
|
Design of a Canted-cosine-theta orbit corrector for the High Luminosity LHC
/ Pepitone, K. (Uppsala U.) ; Kirby, G. (CERN) ; Ruber, R. (Uppsala U.) ; Ahl, A. (Scanditronix Instrument, Uppsala) ; Canale, M. (CERN) ; Dugic, I. (Linnaeus U.) ; Gentini, L. (CERN) ; Johansson, M. (Unlisted, SE) ; Karlsson, G. (Linnaeus U.) ; Kovacikova, J. (Linnaeus U.) et al.
The High Luminosity LHC requires dipole orbit correctors grouped in double aperture magnet assemblies. They provide a field of 3.1 T at 100 A in an aperture of 70 mm. [...]
arXiv:2202.10305.-
2022-09 - 4 p.
- Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4003104
Fulltext: PDF;
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4003104
|
|
4.
|
|
5.
|
Electromechanical Design of a 16-T CCT Twin-Aperture Dipole for FCC
/ Auchmann, Bernhard (CERN) ; Brouwer, Lucas (LBL, Berkeley) ; Caspi, Shlomo (LBL, Berkeley) ; Gao, Jiani (PSI, Villigen) ; Montenero, Giuseppe (PSI, Villigen) ; Negrazus, Marco (PSI, Villigen) ; Rolando, Gabriella (CERN) ; Sanfilippo, Stéphane (PSI, Villigen)
Canted-cosine-theta (CCT) technology has been studied for its suitability for a future-circular-collider (FCC) main dipole in terms of magnetic and mechanical performance, electrothermal protectability, as well as efficiency. In this paper, we present lessons learnt from our search for efficient CCT solutions by means of two-dimensional (2-D) magnetic and mechanical simulations, discuss the 3-D periodic mechanical model, as well as 3-D electromagnetic analysis of the end regions. [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2017) 4000705
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4000705
|
|
6.
|
Superconducting Curved Canted–Cosine–Theta (CCT) for the HIE-ISOLDE Recoil Separator Ring at CERN
/ Kirby, G (CERN) ; Rodin, V (Liverpool U.) ; Kirby, O (Exeter U.) ; Foussat, A (CERN) ; Resta-Lopez, J (Valencia U.) ; Martel, I (Huelva U.) ; Welsch, C (Liverpool U.)
The ISOLDE facility at CERN delivers the largest range of low-energy radioactive beams, exploited by several detector systems to investigate nuclear properties from the stable isotopes to the very exotic systems close to the neutron or proton drip lines. These studies can largely benefit from the use of a high-resolution fragment separator. [...]
2022 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 32 (2022) 4004105
In : 27th International Conference on Magnet Technology (MT-27), Fukuoka, Japan, 15 - 19 Nov 2021, pp.4004105
|
|
7.
|
Modeling of Quench Protection Concepts for Canted-Cosine-Theta Type High-Field Magnets
/ Gao, Jiani (PSI, Villigen) ; Auchmann, Bernhard (CERN ; PSI, Villigen) ; Brouwer, Lucas (LBNL, Berkeley) ; Pautz, Andreas (PSI, Villigen ; Ecole Polytechnique, Lausanne) ; Sanfilippo, Stephane (PSI, Villigen)
An innovative high-field superconducting magnet of Canted-Cosine-Theta (CCT) type has been proposed for Future Circular Collider 16 T dipole magnet design. The unique mechanical structure intercepts the accumulated forces lowering the stress on the windings, constituting intrinsic stress management in high-field Nb $_{3}$ Sn accelerator magnets. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4701505
|
|
8.
|
Mechanical Structure for the PSI Canted-Cosine-Theta (CCT) Magnet Program
/ Montenero, Giuseppe (PSI, Villigen) ; Auchmann, Bernhard (CERN) ; Brouwer, Lucas (LBL, Berkeley) ; Calzolaio, Ciro (PSI, Villigen) ; Caspi, Shlomo (LBL, Berkeley) ; Rolando, Gabriella (PSI, Villigen) ; Sanfilippo, Stephane (PSI, Villigen)
Abstract: The Canted-Cosine-Theta (CCT) technology has the potential, by its intrinsic stress-management, to lower coil stresses in high-field accelerator magnets. This is especially relevant for Nb3Sn magnets, which may be subject to irreversible degradation if the coil stresses exceed critical values. [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4002805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4002805
|
|
9.
|
Coil manufacturing process of the first 1-m-long Canted–Cosine–Theta (CCT) model magnet at PSI
/ Montenero, Giuseppe (PSI, Villigen) ; Auchmann, Bernhard (CERN ; PSI, Villigen) ; Arbelaez, Diego (LBNL, Berkeley) ; Brouwer, Lucas (LBNL, Berkeley) ; Caspi, Shlomo (LBNL, Berkeley) ; Felder, Roland (PSI, Villigen) ; Lackner, Friedrich (CERN) ; Sanfilippo, Stephane (PSI, Villigen) ; Sidorov, Serguei (PSI, Villigen) ; Smekens, David (CERN) et al.
At the Paul Scherrer Institute (PSI), the Canted-Cosine-Theta (CCT) magnet program aims at demonstrating that CCT technology is a viable candidate for the development of 16-T dipole magnets, required for future circular colliders. The first step in this direction is the implementation of a Nb$_3$Sn 1-m-long, two-layer CCT single-aperture dipole, referred to as Canted Dipole One (CD1), which is designed to achieve a peak field in the bore of ~11 T. [...]
2019 - 6 p.
- Published in : IEEE Trans. Appl. Supercond. 29 (2019) 4002906
|
|
10.
|
Test of the First Full-Length Prototype of the HL-LHC D2 Orbit Corrector Based on Canted Cosine Theta Technology
/ Mangiarotti, Franco J (CERN) ; Duda, Michal (Cracow, INP ; CERN) ; Fiscarelli, Lucio (CERN) ; Kirby, Glyn (CERN) ; Bajko, Marta (CERN) ; Coll, Dominic (Unlisted, GB) ; Desbiolles, Vincent ; Feuvrier, Jerome (CERN) ; Guyon, Jean-Luc (CERN) ; Mazet, Jacky (CERN) et al.
In the context of CERN's high-luminosity upgrade project (HL-LHC) for the Large Hadron Collider (LHC), a new double aperture beam orbit corrector magnets will be installed near the recombination dipole (D2). These 2.2 m long NbTi dipoles are built with the canted cosine theta (CCT) technique. [...]
2020 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 30 (2020) 4000505
|
|