CERN Accelerating science

Article
Report number FERMILAB-PUB-19-057-TD
Title Failure Assessments for MQXF Magnet Support Structure with a Graded Approach
Author(s) Pan, Heng (LBL, Berkeley) ; Anderssen, Eric C (LBL, Berkeley) ; Cheng, Daniel W (LBL, Berkeley) ; Prestemon, Soren O (LBL, Berkeley) ; Ambrosio, Giorgio (Fermilab)
Publication 2019
Imprint 2019-02-04
Number of pages 7
In: IEEE Trans. Appl. Supercond. 29 (2019) 8401507
In: Applied Superconductivity Conference 2018, Seattle, United States Of America, 28 Oct - 2 Nov 2018, pp.8401507
DOI 10.1109/TASC.2019.2908113
Subject category Accelerators and Storage Rings
Accelerator/Facility, Experiment LARP
CERN LHC
Project CERN HL-LHC
Abstract The High-Luminosity Large Hadron Collider (HLLHC) upgrade requires new quadrupoles, MQXF, to replace the present LHC inner triplets. The MQXFA magnet is the first prototype that has a 150 mm aperture and uses Nb3Sn superconducting technology in a 4.2 m magnetic length structure. The support structure design of the MQXFA magnet is based on the bladder-and-key technology, where a relatively low pre-stress at room temperature is increased to the final preload targets during the cool-down by the differential thermal contraction of the various components. The magnet support structure components experience different load levels from pre-load to cool-down and excitation. Consequently, a few parts experience high stresses that may cause localized plastic deformations or internal fracture development. The concept presented in this paper for the failure assessment of support structures integrates nonlinear finite element analysis with detailed sub-models and fracture mechanics into an advanced engineering tool. The nonlinear FE solutions enable estimations of the structural response to the given loads, and the advanced fracture analysis with failure assessment diagram (FAD) assesses the structure safety index of results obtained from the FE model. The paper describes how the MQXFA shell end segments are being optimized based on the failure analyses.

Corresponding record in: Inspire


 Registro creado el 2022-10-08, última modificación el 2022-10-10


Texto completo:
Descargar el texto completoPDF
Enlace externo:
Descargar el texto completoFermilab Accepted Manuscript